Influence of different nematic crosslinking unit on mesomorphism of side-chain cholesteric elastomers containing menthyl groups

The synthesis of two cholesteric monomers (M₁ and M₂), nematic crosslinking agent (C₁ and C₂), and the corresponding side-chain elastomers containing menthyl groups (P₁ and P₂ series) is described. The mesomorphism was investigated by differential scanning calorimetry, polarizing optical microscopy, X-ray diffraction, and thermogravimetric analysis. The effect of the content of the different nematic crosslinking unit on the mesomorphism of the elastomers was discussed. M₁ and M₂ showed cholesteric and blue phases; C₁ and C₂ showed nematic phase. Because of the introduction of the nematic crosslinking unit, elastomers P_1-1−P_1-5 and P_2-1−P_2-5 exhibited cholesteric phase. With increasing the content of nematic crosslinking unit, T _g of the obtained elastomers revealed an increased tendency, and T _i of P₁ series firstly increased then decreased, while T _i of P₂ series decreased the mesomorphism of the corresponding elastomers when the content of nematic crosslinking unit was 12 mol.%.     

Side-chain cholesteric liquid crystalline elastomers containing isosorbide as chiral agent – synthesis and characterisation

In this work the new-style nematic monomer M₁ , chiral crosslinking reagent M_C and a series of new side-chain cholesteric liquid crystalline elastomers derived from M₁ and M_C were prepared. The effect of the content of the chiral crosslinking unit on phase behaviour of the elastomers has been discussed. Polymer P₁ showed nematic phase, P₂ –P₇ showed cholesteric phase, P₃ formed Grandjean texture in the heating cycle and turned out a blue Grandjean texture in the cooling cycle, P₂ –P₃ with less than 6 mol% of chiral crosslinking agent gave rise to selective reflection. The elastomers containing less than 15 mol% of the crosslinking units displayed elasticity, reversible phase transition and high thermal stability. Experimental results demonstrated that the glass transition temperatures reduced first and then increased, and the isotropisation temperatures and the mesophase temperature ranges decreased with increasing content of crosslinking unit.     

Synthesis and characterization of side-chain cholesteric elastomers derived from an isosorbide crosslinking agent

New liquid crystalline monomer 4-(4-ethoxybenzoyloxy)biphenyl-4′-[(10-undecylen-1-yloxy)-4′-ethoxy]benzoate (M ₁ ), chiral crosslinking agent isosorbide di-(10-undecylen-1-yloxybenzoate) (M ₂ ), and the corresponding elastomers were prepared. The chemical structures of M ₁ and M ₂ were characterized by Fourier transform infrared and ¹H-nuclear magnetic resonance. The mesomorphic properties and phase behavior were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction measurements. M ₁ exhibited typical threaded texture and droplet texture of nematic phase. The use of chiral crosslinking agent in the polymer networks could induce cholesteric phase. The elastomers containing less than 10 mol% of the chiral crosslinking units showed elasticity, reversible phase transition, wide mesophase temperature ranges, and high thermal stability. For the elastomers P ₂ –P ₄ , the glass transition temperature (T _g) increased; clearing temperature (T _i) and mesophase temperature range (ΔT) decreased with increasing content of the crosslinking unit.     

Synthesis and properties of cholesteric liquid crystalline elastomers

The synthesis of new side-chain cholesteric liquid crystalline elastomers, containing the flexible non-mesogenic crosslinking agent M-1 and the cholesteric monomer M-2, is described by a one-step hydrosilication reaction. The chemical structures of the monomers and network polymers obtained were confirmed by FT-IR spectroscopy. Their mesogenic properties and phase behavior were investigated by differential scanning calorimetry, polarizing optical microscopy, and x-ray diffraction measurements. The influence of the crosslinking units on the phase behavior is discussed. The network polymers showed elasticity, reversible phase transitions, and cholesteric Grandjean texture. The experimental results demonstrated that the glass transition temperatures and isotropization temperatures of network elastomers decreased as the concentration of crosslinking units was increased, but the cholesteric phase was not disturbed.     

Side chain cholesteric liquid crystalline elastomers: synthesis and phase behaviour

A series of new side chain cholesteric liquid crystalline elastomers (P-2–P-6) containing the nematic crosslinking monomer 4-(10-undecen-1-yloyloxy)benzoyl-4′-allyloxybenzoyl-p-benzenediol bisate (M-1) and the cholesteric monomer 4-cholesteryl 4-(10-undecen-1-yloyloxy)benzoate (M-2) were synthesized. The chemical structures of the monomers and elastomers obtained were confirmed by FTIR and ¹H NMR spectroscopy. Their liquid crystalline properties and phase behaviour were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction. The effect of the crosslinking units on phase behaviour is discussed. Elastomers containing less than 20?mol?% of the crosslinking units showed elasticity, reversible phase transitions and cholesteric Grandjean texture. The experimental results demonstrated that the glass transition and isotropization temperatures of P-2–P-6 increased with the increasing concentration of crosslinking unit M-1.     

Side-chain cholesteric liquid crystalline elastomers derived from a mesogenic crosslinking agent: I. Synthesis and mesomorphic properties

The synthesis of new side-chain cholesteric elastomers derived from a cholesteric monomer and mesogenic crosslinking agent is presented. The chemical structures of the monomers obtained were confirmed by elemental analyses, FT-IR, ¹H NMR, and ¹³C NMR. The mesomorphic properties and thermal stability were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarizing optical microscopy (POM), and X-ray diffraction (XRD) measurements. M₁ showed cholesteric phase, and M₂ displayed enantiotropic nematic phase and monotropic smectic phase. The elastomers containing less than 12 mol% of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability.     

Mesomorphic properties of side-chain cholesteric liquid-crystalline elastomers

New monomer cholesteryl 4-(10-undecylen-1-yloxybenzoyloxy)-4′-ethoxybenzoate (M₁), crosslinking agent biphenyl 4,4′-bis(10-undecylen-1-yloxybenzoyloxy-p-ethoxybenzoate) (M₂) and a series of side-chain cholesteric elastomers were prepared. The chemical structures of the monomers and elastomers obtained were confirmed by element analyses, FT-IR, and ¹H NMR. The mesomorphic properties and thermal stability were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction measurements. The influence of the content of the crosslinking unit on the phase behavior of the elastomers was examined. M ₁ showed cholesteric phase, and M ₂ displayed nematic phase. The elastomers containing less than 12 mol% of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability.     

Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4′‐allyloxybiphenyl 4′‐ethoxybenzoate, M₁ ), a chiral crosslinking agent (isosorbide 4‐allyloxybenzoyl bisate, M₂ ) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂ . The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂ –P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145–209.6°C, with no changed on the cooling. Polymers P₄ –P₇ , with more than 6?mol?% of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15?mol?% of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.     

Preparation and phase behavior of side‐chain cholesteric liquid‐crystalline elastomers

A series of new side‐chain cholesteric elastomers derived from cholesteryl 4‐(10‐undecylen‐1‐yloxy)‐4′‐ethoxybenzoate and phenyl 4,4′‐bis(10‐undecylen‐1‐yloxybenzoyloxy‐p‐ethoxybenzoate) was synthesized. The chemical structures of the monomers were confirmed by elemental analyses, Fourier transform infrared, and ¹H NMR and ¹³C NMR spectra. The mesomorphic properties of elastomers were investigated with differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X‐ray diffraction measurements. The influence of the content of the crosslinking unit on the phase behavior of the elastomers was examined. Monomer M₁ showed a cholesteric phase, and M₂ displayed smectic and nematic phases. The elastomers containing <15 mol % of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3315–3323, 2005     

New chiral liquid crystal monomers and cholesteric polyacrylates: synthesis and characterisation

The synthesis of new chiral monomers (M₁ ?M₃ ) based on menthol and the corresponding polyacrylates (P₁ ?P₃ ) is described. The chemical structures, formula and phase behaviour of the obtained monomers and polymers were characterised with FT-IR, ¹H-NMR, elemental analyses, differential scanning calorimetry (DSC), polarising optical microscopy (POM) and X-ray diffraction (XRD). The effect of the mesogenic core rigidity, spacer length and menthyl steric effect on the phase behaviour of M₁ ?M₃ and P₁ ?P₃ is discussed. The expected mesophase of the compounds based on menthol can be obtained by inserting a flexible spacer between the mesogenic core and the terminal groups. For the chiral monomers and polyacrylates, their corresponding melting temperature (T _m), glass transition temperature (T _g) and clearing temperature (T _i) increased with an increase of the mesogenic core rigidity; while the T _m, T _g and T _i decreased with increasing the spacer length. M₁ and P₁ showed no mesophase, while M₂ and M₃ all revealed a SmC* and cholesteric phases. P₂ and P₃ only showed a cholesteric phase.     

Synthesis and characterisation of chiral liquid crystalline elastomers containing four-arm crosslinking agent

A new series of side-chain chiral liquid crystalline elastomers derived from M₁ (cholest-5-3-ol(3β)-4-(2-propen-yloxy)]benzoate) and M_C(2,5-[3,5-bis(4-(3-(4-(allyloxy)phenyl)propanoyloxy)benzoyloxy)benzoic acid]isosorbide diester). The structures of monomers and elastomers measured by using Proton Nuclear Magnetic Resonance Spectra (¹H-NMR) and Fourier transform infrared spectroscopy (FTIR) separately are consistent with our design. IIP~VIP all appeared blue Grandjean (GJ) texture on the heating cycle or cooling cycle. The glass sheets of IIP~VIP were made under 150°C and measured its ultraviolet–visible spectrophotometry by PerkinElmer Lambda 950 instrument (Shelton, CT, USA). IIP~VIP all have absorptions at about 481~483 and 561~562 nm. The optical activities were measured at different temperatures on heating and cooling cycles. And the blue selective reflection of IIP~VIP on the round glass sheet can be seen. The elastomers containing less than 6 mol% of the crosslinking units displayed elasticity, reversible phase transition and high thermal stability. The glass transition temperatures reduced first and then increased, the isotropisation temperatures and the mesophase temperature ranges increased first and then decreased with increasing content of crosslinking unit. The thermogravimetric analysis (TGA) results showed that the temperatures at which 5% weight loss occurred (T_d) were greater than 310°C for all the polymers.     

Preparation and properties of siloxane liquid crystalline elastomers with a mesogenic crosslinking agent

A mesogenic crosslinking agent M-1 was synthesized to minimize the perturbations of non-mesogenic crosslinking agents in liquid crystalline elastomers. The synthesis of new side chain liquid crystalline elastomers containing the rigid mesogenic crosslinking agent M-1 and nematic monomer M-2 by a one-step hydrosilylation reaction is described. The chemical structures of the monomers and network polymers obtained were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties and phase behaviour were investigated by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. The influence of the crosslinking units on phase behaviour is discussed. Liquid crystalline elastomers containing less than 15 mol % of the crosslinking units showed elasticity, reversible phase transitions and a threaded texture. The experimental results demonstrated that the glass transition temperature of polymers P-1-7 increased with increasing concentration of crosslinking agent M-1; but the isotropic temperature and liquid crystalline range decreased slightly.     

Synthesis and characterization of liquid crystalline elastomers bearing fluorinated mesogenic units and crosslinking mesogens

Several new side‐chain liquid crystalline (LC) polysiloxanes and elastomers ( IP ‐ VIP ) bearing fluorinated mesogenic units and crosslinking mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a fluorine‐containing LC monomer 4′‐undec‐10‐enoyloxy‐biphenyl‐4‐yl 4‐fluoro‐benzoate and a crosslinking LC monomer 4′‐(4‐allyloxy‐benzoxy)‐biphenyl‐4‐yl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques such as FTIR, ¹H‐NMR, EA, TGA, DSC, POM and XRD. The effect of crosslinking mesogens on mesomorphic properties of the fluorinated LC polymers was studied as well. The obtained polymers and elastomers were soluble in many solvents such as toluene, tetrahydrofuran, chloroform, and so forth. The temperatures at which 5% weight loss occurred (T_d) were greater than 250°C for all the polymers, and the weight of residue near 600°C increased slightly with increase of the crosslinking mesogens in the fluorinated polymer systems. The samples IP , IIP , IIIP and IVP showed both smectic A and nematic phases when they were heated and cooled, but VP and VIP exhibited only a nematic mesophase. The glass transition temperature (T_g) of polymers increased slightly with increase of crosslinking mesogens in the polymer systems, but the mesophase–isotropic phase transition temperature (T_i) and smectic A–nematic mesophase transition temperature (T_S‐N) decreased slightly. It suggests that the temperature range of the mesophase became narrow with the increase of crosslinking mesogens for all the fluorinated polymers and elastomers. In XRD curves, the intensity of sharp reflections at low angle decreased with increase of crosslinking mesogens in the fluorinated polymers systems, indicating that the smectic order derived from fluorinated mesogenic units should be destroyed by introduction of more crosslinking mesogens. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and characterization of a series of side chain chiral smectic liquid crystalline elastomers

A series of new chiral smectic liquid crystalline elastomers was prepared by graft polymerization of a nematic monomer with a chiral and non‐mesogenic crosslinking agent, using polymethylhydrosiloxane as backbone. The chemical structures of the monomers and polymers obtained were confirmed by FTIR and ¹H NMR. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. Monomer M ₁ showed a nematic phase during heating and cooling. Polymer P ₀ exhibited a smectic B phase; elastomers P ₁–P ₃ showed the smectic A phase, P ₄–P ₆ showed a chiral smectic C(SmC*), and P ₇ displayed stress‐induced birefringence. Elastomers containing less than 15?mol?% M ₂ displayed elasticity, reversible phase transitions with wide mesophase temperature ranges, and high thermal stability. With increasing content of the crosslinking unit, glass transition temperatures first increased, then fell, then increased again; isotropization temperatures and mesophase temperature ranges steadily decreased.     

Synthesis,structure, and properties of chiral liquid crystal monomers and polymers based on menthol

To study structure–mesomorphism relationships of the monomers and polymers based on menthol, four new chiral monomers ( M₁ – M₄ ) and the corresponding homopolymers ( P₁ – P₄ ) with menthyl group were synthesized. Their chemical structures, formula, phase behavior, and thermal stability were characterized by FTIR, ¹H NMR, ¹³C NMR, elemental analyses, differential scanning calorimetry, polarizing optical microscopy, X‐ray diffraction, and thermogravimetric analysis. The selective reflection of light was investigated with ultraviolet/visible spectrometer. The influence of the mesogenic core rigidity, spacer length, and menthyl steric effect on the mesomorphism of M₁ – M₄ and P₁ – P₄ was examined. By inserting a flexible spacer between the mesogenic core and the terminal menthyl groups, four target monomers and polymers could form the expected mesophase. Moreover, their melting temperature (T_m), glass transition temperature (T_g), clearing temperature (T_i), and mesophase range (ΔT) increased with increasing the mesogenic core rigidity; whereas the T_m and T_g decreased, T_i and ΔT increased with an increase of the spacer length. M₁ and M₂ showed monotropic and enantiotropic cholesteric phase, respectively, whereas M₃ and M₄ all revealed chiral smectic C (SmC*), cholesteric and cubic blue phases. In addition, with increasing temperature, the selective reflection of light shifted to the long wavelength region at the SmC* phase range and to the short wavelength region at the cholesteric range, respectively. P₁ and P₂ only showed a smectic A (SmA) phase, whereas P₃ and P₄ exhibited the SmC* and SmA phases. All the obtained polymers had very good thermal stability. © 2012 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym Chem, 2012     

Side‐chain cholesteric liquid‐crystalline elastomers derived from smectic crosslinking units: Synthesis and phase behavior

New side‐chain cholesteric liquid‐crystalline elastomers containing cholesteryl 4‐allyloxybenzoate as cholesteric mesogenic units and biphenyl 4,4′‐bis(10‐undecen‐1‐ylenate) as smectic crosslinking units were synthesized. The chemical structures of the olefinic compounds and polymers obtained were confirmed by element analysis, Fourier transform infrared, proton nuclear magnetic resonance, and carbon‐13 nuclear magnetic resonance spectra. The mesogenic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X‐ray diffraction measurements. The influence of the concentration of the crosslinking unit on the phase behavior of the elastomers was examined. The elastomers containing less than 17 mol % of the crosslinking units revealed elasticity, reversible mesomorphic phase transition, wider mesophase temperature ranges, and higher thermal stability. The experimental results demonstrated that the glass‐transition temperature, isotropization temperature, and mesophase temperature ranges decreased with an increasing concentation of the crosslinking unit. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5262–5270, 2004     

侧链胆甾液晶聚合物及弹性体的液晶性能研究

把胆甾液晶单体 4 烯丙氧基苯甲酸胆甾醇酯 (Mch)分别和向列液晶单体 4 烯丙氧基苯甲酰氧基 4′ 甲氧基苯 (Mn) ,向列液晶交联剂 2 叔丁基对苯二酚双 [4 (6 丙烯酰氧基己氧基 )苯甲酸酯 ](Mnc)接枝到聚硅氧烷链上 ,得到系列侧链液晶聚合物Pn 系列和液晶弹性体Pe 系列 .通过热分析、偏光显微分析和X 射线分析等手段分别研究了向列液晶单体和向列液晶交联剂对含同一胆甾液晶基元聚合物的影响 .结果表明 ,向列液晶单体的摩尔百分比在 80 %以下 ,液晶聚合物Pn 系列为胆甾型液晶 ,在研究的范围内 ,液晶弹性体Pe 系列也为胆甾型液晶 ,Pn 系列和Pe 系列都具有较宽的液晶相范围 ,热分解温度均在 2 80℃以上 .     

Synthesis,structure and properties of new chiral liquid crystalline monomers and homopolysiloxanes containing menthyl groups

The synthesis is described of four new chiral liquid crystalline monomers (M₂–M₅ ) and their corresponding side‐chain homopolysiloxanes (P₂–P₅ ) containing menthyl groups. Chemical structures were characterised using FT‐IR or ¹H NMR spectra, and specific optical rotations were evaluated with a polarimeter. The phase behaviour and mesomorphic properties of the new compounds were investigated by differential scanning calorimetry, thermogravimetric analysis, polarising optical microscopy, UV/visible/NIR spectrocopy and X‐ray diffraction. The monomers and homopolymers with more aryl segments showed noticeably lower specific optical rotation value. The monomers M₂–M₅ formed a cholesteric or blue phase when a flexible spacer was inserted between the rigid mesogenic core and the terminal menthyl groups by reducing the steric effect. M₂–M₅ revealed enantiotropic cholesteric phase. Moreover, M₂ also exhibited a monotropic smectic A (SmA) phase, and M₄ also exhibited a cubic blue phase on cooling. The selective reflection of light shifted to the long wavelength region with increasing rigidity of the mesogenic core for M₂–M₅ . P₂–P₅ exhibited SmA phases, and the mesogenic moieties were ordered in smectic orientation with their centres of gravity in planes. Melting or glass transition temperature and the clearing temperature increased, and the mesophase temperature range widened with increasing rigidity of the mesogenic core.     

New side chain ferroelectric liquid crystalline polymers based on (2S, 3S)-2-chloro-3-methylpentanoic acid: synthesis and phase behaviour

The synthesis of four new chiral mesogenic monomers (M₁–M₄) and side chain ferroelectric liquid crystalline polymers containing (2S, 3S)-2-chloro-3-methylpentanoate is described. The chemical structures and phase behaviour of the monomers and polymers obtained in this study were characterised by Fourier transform infrared, proton nuclear magnetic resonance, polarising optical microscopy, differential scanning calorimetry, thermogravimetric analysis and X-ray diffraction. The selective reflection of light was investigated with ultraviolet/visible (UV/Vis). Their structure–mesomorphism relationships were discussed. M₁ and P₁ all showed a chiral smectic C (SmC*) phase. M₂ and M₃ revealed a SmC* phase and cholesteric phase, while their corresponding polymers P₂ and P₃ revealed a SmC* phase and smectic A (SmA) phase. M₄ only exhibited a cholesteric phase, whereas the corresponding polymers P₄ showed a SmA phase. Moreover, the selective reflection of light shifted to the long-wavelength region at the SmC* phase range and to the short-wavelength region at the cholesteric range with increasing temperature, respectively. The results seemed to demonstrate that the tendency towards melting temperature (T_m), glass transition temperature (T_g), isotropic temperature (T_i) and mesophase range for the monomers and polymers increased by increasing the mesogenic core rigidity or the number of phenyl ring. The polymerisation effect could lead to higher liquid crystalline to isotropic phase transition temperature, wider mesophase range and more ordered smectic phase formed. In addition, all the obtained polymers had a very good thermal stability and the corresponding T_d increased by increasing the number of phenyl ring.     

Synthesis and characterization of chiral azo LCPs with optical properties

ABSTRACT

In this study, we designed, synthesised and characterised two series of cholesteric liquid crystal polymers, QP series and ZP series. With polymethylhydrosiloxane as the main chain, QP series were synthesised by copolymerisation between the monomer M₁ containing a cholesteryl mesogenic unit and the monomer M₂ with a hydroxyl. ZP series, meanwhile, were synthesised by esterification between QP series members and the monomer M₃, a carboxylic acid with an azo mesogenic unit. We characterised chemical structures of all the monomers and polymers by FT-IR and ¹H-NMR, which proved that the target monomers and polymers had been obtained. We observed dramatic colour changes after the introduction of monomer M₃ and Grandjean textures from both QP series and ZP series using POM. In addition, strong selective reflection could be observed as well. Then, we characterised the thermal properties of polymers by DSC, TGA and XRD to explore their phase transition behaviours further. Their photoresponsive and photochromic properties were characterised by UV-Vis spectrum.