Diode laser atomic absorption spectrometry

The paper reviews the past 11 years of literature on the application of diode lasers in atomic absorption spectrometry with graphite furnaces (GF), plasmas and flames as atomizers. Experimental arrangements and techniques for powerful absorption measurements as well as the theoretical background are covered. The analytical possibilities of high-resolution spectroscopy, including Doppler-free techniques for isotope selective measurements and isotope dilution analysis are discussed and various applications of element-selective detection by diode laser atomic absorption in combination with separation techniques, such as liquid (LC) and gas chromatography (GC), and with laser ablation of solid samples, are presented.     

Advances of sensitive techniques in laser spectroscopy

Different techniques are used for the sensitive detection of overtone transitions of small molecules, such as H₂S, C₂H₂, OCS, O₃ in the visible and near infrared region. The techniques include: phase-modulated or wavelength-modulation absorption spectroscopy with a widely tunable single mode diode laser, opto-acoustic spectroscopy in resonance cells with a color center laser or a Ti:Sapphire laser, and sub-Doppler opto-thermal spectroscopy in cold collimated molecular beams, using a low temperature bolometer as detector. The three techniques are compared with regard to sensitivity and spectral resolution. The mass selective sensitive detection of small metal clusters Li₃ and Na₃ and their high resolution sub-Doppler spectroscopy, using resonant two-photon ionization with cw lasers, is briefly discussed.     

Identification and characterization of organic nanoparticles in food

Interest in nanoparticles (NPs) has increased explosively over the past two decades. Using NPs, high loadings of vitamins and health-benefit actives can be achieved in food, and stable flavors as well as natural food-coloring dispersions can be developed. Detection and characterization of NPs are essential in understanding the benefits as well as the potential risks of the application of such materials in food. While many such applications are described in the literature, methods for detection and characterization of such particles are lacking. Organic NPs suitable for application in food are lipid-, protein- or polysaccharide-based particles, and this review describes current analytical techniques that are used, or could be used, for identification and characterization of such particles in food products. We divide the analytical approaches into four sections: sample preparation; separation; imaging; and, characterization.We discuss techniques and reported applications for NPs or otherwise related particle compounds. The results of this investigation show that, for a successful characterization of NPs in food, at least some kind of sample preparation will be required. While a simple sample preparation may be satisfactory for imaging techniques for known analytes, for other techniques, a further separation using chromatography, field-flow fractionation or ion-mobility separation is necessary. Subsequently, photon-correlation spectroscopy and especially mass spectrometry techniques as matrix-assisted laser desorption/ionization combined with time-of-flight mass spectrometry, seem suitable techniques for characterizing a wide variety of organic NPs.     

Analytical detection techniques for droplet microfluidics—A review

In the last decade, droplet-based microfluidics has undergone rapid progress in the fields of single-cell analysis, digital PCR, protein crystallization and high throughput screening. It has been proved to be a promising platform for performing chemical and biological experiments with ultra-small volumes (picoliter to nanoliter) and ultra-high throughput. The ability to analyze the content in droplet qualitatively and quantitatively is playing an increasing role in the development and application of droplet-based microfluidic systems. In this review, we summarized the analytical detection techniques used in droplet systems and discussed the advantage and disadvantage of each technique through its application. The analytical techniques mentioned in this paper include bright-field microscopy, fluorescence microscopy, laser induced fluorescence, Raman spectroscopy, electrochemistry, capillary electrophoresis, mass spectrometry, nuclear magnetic resonance spectroscopy, absorption detection, chemiluminescence, and sample pretreatment techniques. The importance of analytical detection techniques in enabling new applications is highlighted. We also discuss the future development direction of analytical detection techniques for droplet-based microfluidic systems.     

Applications of micro-analysis to individual environmental particles

An overview is given of the recent applications of micro-analytical techniques to single particle environmental research performed at the University of Antwerp since 1990. Automated electron probe X-ray micro-analysis, laser microprobe mass spectrometry and micro-particle induced X-ray emission are the techniques most used for aerosol, aqueous suspension and sediment characterisation. Other techniques like scanning transmission electron microscopy, electron energy loss spectroscopy, Fourier transform infra red microscopy and secondary ion mass spectrometry have only recently been implemented into environmental research.     

Applications of micro-analysis to individual environmental particles

An overview is given of the recent applications of micro-analytical techniques to single particle environmental research performed at the University of Antwerp since 1990. Automated electron probe X-ray micro-analysis, laser microprobe mass spectrometry and micro-particle induced X-ray emission are the techniques most used for aerosol, aqueous suspension and sediment characterisation. Other techniques like scanning transmission electron microscopy, electron energy loss spectroscopy, Fourier transform infra red microscopy and secondary ion mass spectrometry have only recently been implemented into environmental research.     

DFB laser diodes in the wavelength range from 760 nm to 2.5 microm

We present a novel device technology to produce DFB laser diodes which are suitable for tunable diode laser spectroscopy. The new technological approach employs lateral metal distributed feedback (DFB) gratings in close proximity to the laser ridge which results in single mode emission with high spectral purity and output powers as required for most spectroscopic applications. Over the entire wavelength range from the visible (760 nm) up to the near-infrared (2.5 microm) single mode emission can be obtained for devices based on different semiconductor systems such as GaAs, InP and GaSb. Typical side mode suppression ratios are better than 35 dB for cw-room temperature operation and narrow linewidths ensure high spectroscopic resolution.     

DFB laser diodes in the wavelength range from 760 nm to 2.5 μm

We present a novel device technology to produce DFB laser diodes which are suitable for tunable diode laser spectroscopy. The new technological approach employs lateral metal distributed feedback (DFB) gratings in close proximity to the laser ridge which results in single mode emission with high spectral purity and output powers as required for most spectroscopic applications. Over the entire wavelength range from the visible (760 nm) up to the near-infrared (2.5 microm) single mode emission can be obtained for devices based on different semiconductor systems such as GaAs, InP and GaSb. Typical side mode suppression ratios are better than 35 dB for cw-room temperature operation and narrow linewidths ensure high spectroscopic resolution.     

Silver nanofractals: electrochemical synthesis, XPS characterization and application in LDI-MS

Silver nanofractals (Ag-NFs) have been electrosynthesized and characterized by means of morphological and spectroscopic analytical techniques. In particular, X-ray photoelectron spectroscopy has been used to assess the nanomaterial surface chemical state. Ag-NFs show interesting perspectives in bioanalytical applications, particularly as non-conventional desorption and ionization promoters in laser desorption ionization mass spectrometry.     

Novel phenylamine-based oxime ester photoinitiators for LED-induced free radical,cationic, and hybrid polymerization

Four new photoinitiators (PI's) containing various phenylamine-based groups as chromophores and oxime ester (OXE) as initiating groups are proposed for the free radical polymerization, the cationic polymerization, and interpenetrated polymer networks upon visible light exposure using a light emitting diodes at 405 nm. These compounds showed outstanding polymerization photoinitiation ability, that is, high-polymerization rates and good final reactive function conversions were obtained. The chemical mechanisms by which these OXE's generate reactive species were investigated through different techniques including real-time Fourier transform infrared spectroscopy, UV–visible spectroscopy, fluorescence (time-resolved or steady state) as well as cyclic voltammetry. Markedly, the proposed structures can be used as thermal initiators indicating all of them can be polymerized under suitable reaction temperature. In addition, due to their high efficiency, these optimized PI's were found to be useful @405 nm for both direct laser write and 3D printing applications.     

Ultra sensitive trace gas detection for biomedical applications

We present an overview of our recent progress on spectroscopic trace gas detection for biomedical applications. The latest developments of cavity-enhanced spectroscopy as well as magnetic rotation spectroscopy lead to unprecedented sensitivity and specificity. The current detection limits of our laser spectroscopic approaches are in the picomolar to nanomolar range, depending on the molecular compound. The time resolution of the measurements is down to the sub-second range. This very high sensitivity and time resolution open up exciting perspectives for novel analytical tasks in biomedical research and clinical diagnosis.     

Ultrafast laser spectroscopy and control of atmospheric aerosols

We review applications of ultrafast laser pulses for aerosol analysis via linear and non-linear spectroscopy, including the most advanced techniques like coherent control of molecular excited states. We also discuss the capability of such pulses to influence the nucleation of atmospheric aerosols by assisting condensation of water in air.     

Tungsten devices in analytical atomic spectrometry

Tungsten devices have been employed in analytical atomic spectrometry for approximately 30 years. Most of these atomizers can be electrically heated up to 3000 °C at very high heating rates, with a simple power supply. Usually, a tungsten device is employed in one of two modes: as an electrothermal atomizer with which the sample vapor is probed directly, or as an electrothermal vaporizer, which produces a sample aerosol that is then carried to a separate atomizer for analysis. Tungsten devices may take various physical shapes: tubes, cups, boats, ribbons, wires, filaments, coils and loops. Most of these orientations have been applied to many analytical techniques, such as atomic absorption spectrometry, atomic emission spectrometry, atomic fluorescence spectrometry, laser excited atomic fluorescence spectrometry, metastable transfer emission spectroscopy, inductively coupled plasma optical emission spectrometry, inductively coupled plasma mass spectrometry and microwave plasma atomic spectrometry. The analytical figures of merit and the practical applications reported for these techniques are reviewed. Atomization mechanisms reported for tungsten atomizers are also briefly summarized. In addition, less common applications of tungsten devices are discussed, including analyte preconcentration by adsorption or electrodeposition and electrothermal separation of analytes prior to analysis. Tungsten atomization devices continue to provide simple, versatile alternatives for analytical atomic spectrometry.     

Passion for precision.

Optical frequency combs from mode-locked femtosecond lasers have revolutionized the art of counting the frequency of light. They can link optical and microwave frequencies in a single step, and they provide the long missing clockwork for optical atomic clocks. By extending the limits of time and frequency metrology, they enable new tests of fundamental physics laws. Precise comparisons of optical resonance frequencies of atomic hydrogen and other atoms with the microwave frequency of a cesium atomic clock are establishing sensitive limits for possible slow variations of fundamental constants. Optical high harmonic generation is extending frequency comb techniques into the extreme ultraviolet, opening a new spectral territory to precision laser spectroscopy. Frequency comb techniques are also providing a key to attosecond science by offering control of the electric field of ultrafast laser pulses. In our laboratories at Stanford and Garching, the development of new instruments and techniques for precision laser spectroscopy has long been motivated by the goal of ever higher resolution and measurement accuracy in optical spectroscopy of the simple hydrogen atom which permits unique confrontations between experiment and fundamental theory. This lecture recounts these adventures and the evolution of laser frequency comb techniques from my personal perspective.     

KrF pulsed laser ablation of thin films made from fluorinated heterocyclic poly(naphthyl-imide)s

Among the many aspects of laser ablation, development of conical structures induced by excimer laser radiation on polyimide surfaces has been thoroughly investigated. Because the mechanisms that produce these surface textures are not fully understood, two theories, photochemical bond breaking and thermal reaction, have been introduced. Here we present the first study of ultraviolet laser ablation behavior of thin films made from fluorinated poly(naphthyl-imide)s containing oxadiazole rings and the investigation of the mechanism of cone-like structure formation at two laser fluences, 57 and 240 mJ/cm(2). The morphology of thin films before and after laser ablation was studied by using various spectroscopy techniques such as Fourier transform infrared spectroscopy, time-resolved emission and X-ray photoelectron spectroscopy, atomic force microscopy, and contact angle measurements. All of the data suggest impurities shielded at low fluence radiation (57 mJ/cm(2)) and a radiation hardening process at high value fluence (240 mJ/cm(2)), which are proposed as the main mechanisms for laser ablation of our polyimide films, and we bring evidence to support them.     

Application of semiconductor light sources for investigations of photochemical reactions

Semiconductor light sources, like laser diodes or ultrabright light emitting diodes, are widely used in optical spectroscopy. In this presentation an overview of applications in photochemistry is given. Since the beginning of the 1990s an increasing number of publications with the application of semiconductor light sources appeared. Three different techniques were used: single photon counting with short pulses, phase-modulation fluorometry using a conventional modulation spectrometer, or a lock-in amplifier. Using continuous wave laser diodes in the visible region, which are available from 690 to 630 nm (and, recently, down to 400 nm), a new compact fluorescence spectrometer was developed in our laboratory. Using the phase fluorometric method, measurements down to 100 ps are now possible. Values can be measured in steps of 10 ps with good reproducibility using a high-frequency signal generator and a GHz digital storage oscilloscope. Several investigations have been carried out applying this technique including time-resolved detection of crude oil as an example for possible practical applications.     

Hyphenated chromatographic methods for biomaterials

The improvement in hyphenated analytical techniques has significantly widened their applications to the analysis of biomaterials. In this article, we discuss recent advances in applications of hyphenated chromatographic techniques including capillary electrophoresis to the analyses of biological samples. As tools of separation, gas chromatography, high-performance liquid chromatography and capillary electrophoresis are considered with special emphasis on applications utilizing the hyphenation of these methods to mass spectrometry. Moreover, applications using other detection methods such as Fourier transform infrared spectroscopy hyphenated to gas chromatography and photodiode array detector combined with high-performance liquid chromatography or capillary electrophoresis are also discussed. Owing to their high sensitivity, luminescence-based detection systems such as laser-induced fluorescence and chemiluminescence are also included in this review.     

Light microscopy with doughnut modes: a concept to detect, characterize, and manipulate individual nanoobjects

Higher order laser modes, mainly called doughnut modes (DMs) have use in many different branches of research, such as, bio-imaging, material science, single-molecule microscopy, and spectroscopy. The main reason of their increasing importance is that recently, the techniques to generate well-defined DMs have been refined or rediscovered. Although their potential is still not fully utilized, their specifically polarized field distribution gives rise to a wide field of applications. They are contributing to complete our fundamental knowledge of the optical properties of single emitting species, such as molecules, nanoparticles, or quantum dots, offering insight into the three-dimensional dipole or particle orientation in space. The perfect zero intensity in the focus center qualifies some DMs for stimulated emission depletion (STED) microscopy. For the same reason, they have been suggested for trapping and tweezing applications.     

Applications of chalcogenide glass optical fibers

Chalcogenide-glass fibers based on sulfide, selenide, telluride and their rare-earth-doped compositions are being actively pursued worldwide. Great strides have been made in reducing optical losses using improved chemical purification techniques, but further improvements are needed in both purification and fiberization technology to attain the theoretical optical losses. Despite this, chalcogenide-glass fibers are enabling numerous applications that include laser power delivery, chemical sensing, and imaging, scanning near field microscopy/spectroscopy, IR sources/lasers, amplifiers and optical switches.     

Spectroscopy of the free phenalenyl radical

After benzene and naphthalene, the smallest polycyclic aromatic hydrocarbon bearing six-membered rings is the threefold-symmetric phenalenyl radical. Despite the fact that it is so fundamental, its electronic spectroscopy has not been rigorously scrutinized, in spite of growing interest in graphene fragments for molecular electronic applications. Here we used complementary laser spectroscopic techniques to probe the jet-cooled phenalenyl radical in vacuo. Its spectrum reveals the interplay between four electronic states that exhibit Jahn-Teller and pseudo-Jahn-Teller vibronic coupling. The coupling mechanism has been elucidated by the application of various ab initio quantum-chemical techniques.