Electrothermal flow effects in insulating (electrodeless) dielectrophoresis systems

We simulate electrothermally induced flow in polymeric, insulator-based dielectrophoresis (iDEP) systems with DC-offset, AC electric fields at finite thermal Péclet number, and we identify key regimes where electrothermal (ET) effects enhance particle deflection and trapping. We study a single, two-dimensional constriction in channel depth with parametric variations in electric field, channel geometry, fluid conductivity, particle electrophoretic (EP) mobility, and channel electroosmotic (EO) mobility. We report the effects of increasing particle EP mobility, channel EO mobility, and AC and DC field magnitudes on the mean constriction temperature and particle behavior. Specifically, we quantify particle deflection and trapping, referring to the deviation of particles from their pathlines due to dielectrophoresis as they pass a constriction and the stagnation of particles due to negative dielectrophoresis near a constriction, respectively. This work includes the coupling between fluid, heat, and electromagnetic phenomena via temperature-dependent physical parameters. Results indicate that the temperature distribution depends strongly on the fluid conductivity and electric field magnitude, and particle deflection and trapping depend strongly on the channel geometry. Electrothermal (ET) effects perturb the EO flow field, creating vorticity near the channel constriction and enhancing the deflection and trapping effects. ET effects alter particle deflection and trapping responses in insulator-based dielectrophoresis devices, especially at intermediate device aspect ratios (2 ≤ r ≤ 7) in solutions of higher conductivity (σ m ≥ 1 × 10(-3)S/m). The impact of ET effects on particle deflection and trapping are diminished when particle EP mobility or channel EO mobility is high. In almost all cases, ET effects enhance negative dielectrophoretic particle deflection and trapping phenomena.     

Insulator-based dielectrophoretic single particle and single cancer cell trapping

Trapping of individual cells at specific locations in a microfluidic lab-on-a-chip platform is essential for single cell studies, especially those requiring individual stimulation followed by downstream analysis. To this aim, we have designed microdevices based on direct current (DC) insulator-based dielectrophoresis (iDEP) acting as individual single cell traps. We present both the design of a negative iDEP trap and a positive iDEP trap using insulating posts integrated at microchannel intersections. We obtained electric field distributions via numerical simulations adapted to the intersection and trap geometry with which we predict single particle pathlines. With polystyrene particles of 10?μm diameter, we demonstrated an effective design for a single particle trap in the case of negative dielectrophoresis. The onset trapping voltage shows an inverse relation to the buffer conductivity, thus indicating the influence of electrokinetic effects on the trapping behavior. Additionally, we demonstrated the proof-of-principle of single MCF-7 breast cancer cell trapping in a positive iDEP trap. Our single particle trapping experiments were further in very good agreement with numerical simulations. To ensure that no significant damage occurred to the cells during the experiment, we further optimized medium conditions to ensure viability of the cells for at least 1?h, more than sufficient for microfluidic trapping experiments. Our results thus indicated the successful design of DC iDEP traps, which can easily be integrated into a variety of microchip operations for single cell analysis.     

Dielectrophoresis‐assisted creation of cell aggregates under flow conditions using planar electrodes

We present a microfluidic platform allowing dielectrophoresis‐assisted formation of cell aggregates of controlled size and composition under flow conditions. When specific experimental conditions are met, negative dielectrophoresis allows efficient concentration of cells towards electric field minima and subsequent aggregation. This bottom‐up assembly strategy offers several advantages with respect to the targeted application: first, dielectrophoresis offers precise control of spatial cell organization, which can be adjusted by optimizing electrode design. Then, it could contribute to accelerate the establishment of cell‐cell interactions by favoring close contact between neighboring cells. The trapping geometry of our chip is composed of eight electrodes arranged in a circle. Several parameters have been tested in simulations to find the best configurations for trapping in flow. Those configurations have been tested experimentally with both polystyrene beads and human embryonic kidney cells. The final design and experimental setup have been optimized to trap cells and release the created aggregates on demand.     

Feasibility study for cell electroporation detection and separation by means of dielectrophoresis

Electroporation is a phenomenon during which exposure of a cell to high voltage electric pulses results in a significant increase in its membrane permeability. Aside from the fact that after the electroporation the cell membrane becomes more permeable, the cells' geometrical and electrical properties change considerably. These changes enable use of the force on dielectric particles exposed to non-uniform electric field (dielectrophoresis) for separation of non-electroporated and electroporated cells. This paper reports the results of an attempt to separate non-electroporated and electroporated cells by means of dielectrophoresis. In several experiments we managed to separate the non-electroporated and electroporated cells suspended in a medium with conductivity 0.174 S/m by exposing them to a non-uniform electric field at a frequency of 2 MHz. The behaviour of electroporated cells exposed to dielectrophoresis raises the presumption that in addition to conductivity, considerable changes in membrane permittivity occur after the electroporation.     

A continuous DC-insulator dielectrophoretic sorter of microparticles

A lab-on-a-chip device is described for continuous sorting of fluorescent polystyrene microparticles utilizing direct current insulating dielectrophoresis (DC-iDEP) at lower voltages than previously reported. Particles were sorted by combining electrokinetics and dielectrophoresis in a 250 μm wide PDMS microchannel containing a rectangular insulating obstacle and four outlet channels. The DC-iDEP particle flow behaviors were investigated with 3.18, 6.20 and 10 μm fluorescent polystyrene particles which experience negative DEP forces depending on particle size, DC electric field magnitude and medium conductivity. Due to negative DEP effects, particles are deflected into different outlet streams as they pass the region of high electric field density around the obstacle. Particles suspended in dextrose added phosphate buffer saline (PBS) at conductivities ranging from 0.50 to 8.50 mS/cm at pH 7.0 were compared at 6.85 and 17.1 V/cm. Simulations of electrokinetic and dielectrophoretic forces were conducted with COMSOL Multiphysics^® to predict particle pathlines. Experimental and simulation results show the effect of medium and voltage operating conditions on particle sorting. Further, smaller particles experience smaller iDEP forces and are more susceptible to competing nonlinear electrostatic effects, whereas larger particles experience greater iDEP forces and prefer channels 1 and 2. This work demonstrates that 6.20 and 10 μm particles can be independently sorted into specific outlet streams by tuning medium conductivity even at low operating voltages. This work is an essential step forward in employing DC-iDEP for multiparticle sorting in a continuous flow, multiple outlet lab-on-a-chip device.     

Separation of erythrocytes and latex beads by dielectrophoretic levitation and hyperlayer field-flow fractionation.

A model system consisting of a mixture of latex beads and erythrocytes has been investigated to demonstrate the practical feasibility of particle separation by means of the combined application of negative dielectrophoresis and hyperlayer field-flow fractionation. The dielectrophoretic levitation of latex beads is demonstrated by energizing interdigitated electrodes, of widths and separation ranging from 5 to 40 μm, with AC signals of 0–10 V (rms) in the frequency range 1 kHz–10 MHz. Maximum levitation was attained at 1 MHz, at which frequency levitation is relatively independent of the suspending medium conductivity. Levitation was also independent of particle size, but dependent on particle density and dielectric properties. At 1 MHz the erythrocytes were attracted to the electrodes by positive dielectrophoresis, and so could be separated from the latex beads by fluid flow. The electric field and field gradient above the electrodes were also computer modelled, and this information was used to design the electrode and chamber geometries for optimum DEP-field-flow fractionation.     

Dielectrophoresis for manipulation of micro/nano particles in microfluidic systems

Dielectrophoretic (DEP) force is exerted when a neutral particle is polarized in a non-uniform electric field, and depends on the dielectric properties of the particle and the suspending medium. The integration of DEP and microfluidic systems offers numerous applications for the separation, trapping, assembling, transportation, and characterization of micro/nano particles. This article reviews the applications of DEP forces in microfluidic systems. It presents the theory of dielectrophoresis, different configurations, and the applications of such systems for particle manipulation and device fabrication.     

Dielectrophoresis and AC-induced assembly in binary colloidal suspensions

Dielectrophoretic behaviors and assembly of a binary suspension in aqueous media are examined in the presence of nonuniform alternating current (AC) electric field. A peculiar low-frequency threshold and dielectrophoresis (DEP) crossover frequency determine the applicable frequency window for binary assembly under positive DEP, which can be effectively tuned by medium conductivity and particle size, suggesting that the dynamic double-layer effect is responsible for the interfacial polarization of micrometer to submicrometer-sized particles in aqueous suspensions. Strong effects of AC-field frequency, medium conductivity, and size ratio on binary assembly morphology have been observed. A frequency-medium conductivity phase diagram is obtained to illustrate the morphological transition of assembled colloidal aggregates from segregated, ordered assemblies to inverted segregation with the appearance of amorphous phases upon increasing frequency and/or medium conductivity, which is a direct consequence of the competition between DEP and hydrodynamic mobility. Significantly, our results demonstrate a rapid method to form hybrid nanostructured materials.     

Particle trapping in electrically driven insulator-based microfluidics: Dielectrophoresis and induced-charge electrokinetics

Electrokinetically driven insulator-based microfluidic devices represent an attractive option to manipulate particle suspensions. These devices can filtrate, concentrate, separate, or characterize micro and nanoparticles of interest. Two decades ago, inspired by electrode-based dielectrophoresis, the concept of insulator-based dielectrophoresis (iDEP) was born. In these microfluidic devices, insulating structures (i.e., posts, membranes, obstacles, or constrictions) built within the channel are used to deform the spatial distribution of an externally generated electric field. As a result, particles suspended in solution experience dielectrophoresis (DEP). Since then, it has been assumed that DEP is responsible for particle trapping in these devices, regardless of the type of voltage being applied to generate the electric field—direct current (DC) or alternating current. Recent findings challenge this assumption by demonstrating particle trapping and even particle flow reversal in devices that prevent DEP from occurring (i.e., unobstructed long straight channels stimulated with a DC voltage and featuring a uniform electric field). The theory introduced to explain those unexpected observations was then applied to conventional “DC-iDEP” devices, demonstrating better prediction accuracy than that achieved with the conventional DEP-centered theory. This contribution summarizes contributions made during the last two decades, comparing both theories to explain particle trapping and highlighting challenges to address in the near future.     

Dielectrophoresis of surface conductance modulated single-walled carbon nanotubes using catanionic surfactants

Dielectrophoresis has received considerable attention for separating nanotubes according to electronic types. Here we examine the effects of surface conductivity of semiconducting single walled carbon nanotubes (SWNT), induced by ionic surfactants, on the sign of dielectrophoretic force. The crossover frequency of semiconducting SWNT increases rapidly as the conductivity ratio between the particle and medium increases, leading to an incomplete separation of ionic surfactant suspended SWNT at an electric field frequency of 10 MHz. To reduce the conductivity ratio, the surface charge of SWNT is neutralized by an equimolar mixture of anionic surfactant sodium dodecyl sulfate (SDS) and cationic surfactant cetyltrimethylammonium bromide (CTAB), resulting in negative dielectrophoresis of semiconducting species at 10 MHz. A comparative Raman spectroscopy study shows a nearly complete separation of metallic SWNT.     

DC insulator dielectrophoretic applications in microdevice technology: a review

Dielectrophoresis is a noninvasive, nondestructive, inexpensive, and fast technique for the manipulation of bioparticles. Recent advances in the field of dielectrophoresis (DEP) have resulted in new approaches for characterizing the behavior of particles and cells using direct current (DC) electric fields. In such approaches, spatial nonuniformities are created in the channel by embedding insulating obstacles in the channel or flow field in order to perform separation or trapping. This emerging field of dielectrophoresis is commonly termed DC insulator dielectrophoresis (DC-iDEP), insulator-based dielectrophoresis (iDEP), or electrodeless dielectrophoresis (eDEP). In many microdevices, this form of dielectrophoresis has advantages over traditional AC-DEP, including single material microfabrication, remotely positioned electrodes, and reduced fouling of the test region. DC-iDEP applications have included disease detection, separation of cancerous cells from normal cells, and separation of live from dead bacteria. However, there is a need for a critical report to integrate these important research findings. The aim of this review is to provide an overview of the current state-of-art technology in the field of DC-iDEP for the separation and trapping of inert particles and cells. In this article, a review of the concepts and theory leading to the manipulation of particles via DC-iDEP is given, and insulating obstacle geometry designs and the characterization of device performance are discussed. This review compiles and compares the significant findings obtained by researchers in handling and manipulating particles.     

Gravitation-driven stress-reduced cell handling

We present a simple lab-on-chip device for handling small samples of delicate cells, e.g. stem cells. It uses a combination of sedimentation and dielectrophoresis. The transport of cells is driven by gravitation. Dielectrophoresis uses radio-frequency electric fields for generating particle-selective forces dependent on size and polarisability. Electrodes along the channels hold particles and/or cells in a defined position and deflect them towards different outlets. The absence of external pumping and the integration of injection and sampling ports allow the processing of tiny sample volumes. Various functions are demonstrated, such as contact-free cell trapping and cell/particle sorting. Pairs of human cells and antibody-coated beads, as they are formed for T cell activation, are separated from unbound beads. The cells experience only low stress levels compared with the stress levels in dielectrophoresis systems, where transport depends on external pumping. Our device is a versatile yet simple tool that finds applications in cellular biotechnology, in particular when an economic solution is required. Figure A simple gravitation-driven lab-on-chip device for the separation of mixed populations of microparticles or cells by negative dielectrophoresis.     

Multi-particle interaction in AC electric field driven by dielectrophoresis force

When the dielectrophoresis technology is used to manipulate micron-sized particles, the interaction between particles should not be ignored because of the particle-particle interaction. Especially, when multiple particles (number of particles is above 2) are simultaneously manipulated, the interaction between neighboring particles will affect the results of the manipulation. This research investigates the interaction of particles caused dielectrophoresis effect by the Arbitrary Lagrangian-Eulerian (ALE) method based on the hypothesis of the thin layer of the electric double layer at the microscale. The mathematics model can be solved simultaneously by the finite element method for the AC electric field, the flow field around the suspended particles and the particle mechanics at the micrometer scale. In this study, the particle conductivity and the direction of the electric field are investigated, we find that particle conductivity and electric field direction pose an impact on particle movement, and the research reveal the law of microparticle dielectrophoresis movement, which could offer theoretical and technology support to profoundly understand the precise manipulation of particles in microfluidic chips by the dielectrophoresis effect.     

Multi-step dielectrophoresis for separation of particles

A new concept for separation of particles based on repetitive dielectrophoretic trapping and release in a flow system is proposed. Calculations using the finite element method have been performed to envision the particle behavior and the separation effectiveness of the proposed method. As a model system, polystyrene beads in deionized water and a micro-flow channel with arrays of interdigited electrodes have been used. Results show that the resolution increases as a direct function of the number of trap-and-release steps, and that a difference in size will have a larger influence on the separation than a difference in other dielectrophoretic properties. About 200 trap-and-release steps would be required to separate particles with a size difference of 0.2%. The enhanced separation power of dielectrophoresis with multiple steps could be of great importance, not only for fractionation of particles with small differences in size, but also for measuring changes in surface conductivity, or for separations based on combinations of difference in size and dielectric properties.     

Distinct and independent dielectrophoretic behavior of the head and tail of sperm and its potential for the safe sorting and isolation of rare spermatozoa

Often, in semen samples with minute amounts of sperm, even the single spermatozoon required to fertilize an oocyte cannot be found in the ejaculate. This is primarily because currently, sperm is generally searched for manually under a microscope. In this study, dielectrophoresis (DEP) was investigated as an alternative automated technique for sorting sperm cells. Using a quadrupolar electrode array it was shown that the head and tail of the sperm had independent and unique crossover frequencies corresponding to the transition of the DEP force from repulsive (negative) to attractive (positive). These surprising results were further analyzed, showing that the head and tail have their own distinct electrical properties. This significant result allows for the sperm's head, which contains the DNA, to be distanced from potentially damaging high electric fields using negative DEP while simultaneously manipulating and sorting the sperm using the positive DEP response of the tail. A proof of concept sorting chip was designed and tested. The low crossover frequency of the tail also allows for the use of a higher conductivity, and thus more physiological, medium than the conventional DEP solutions. Although more research is required to design and optimize an efficient, user‐friendly, and high‐throughput device, this research is a proof of concept that DEP has the potential to automate and improve the processing of semen samples, especially those containing only rare spermatozoa.     

High sensitivity three-dimensional insulator-based dielectrophoresis

Insulator-based dielectrophoresis (iDEP) is a very promising technique for sorting microparticles based on their electrical properties. The need for microfabricated electrode arrays is eliminated by using constrictions in a microchannel to induce large electric field gradients. In this work, micro-milling is used to build devices with three-dimensional features that exhibit very large constriction ratios. These three-dimensional insulator-based dielectrophoresis (3DiDEP) devices allow for trapping microparticles at average electric fields one order of magnitude lower than two-dimensional designs with the same footprint. Low voltage operation minimizes Joule heating effects that have limited previous systems, opening up the possibility for new biological applications of iDEP.     

One-, two-, and three-dimensional organization of colloidal particles using nonuniform alternating current electric fields

We demonstrate here the use of nonuniform alternating current (AC) electric fields, generated by planar electrodes, for the organization of num-sized particles into one-, two-, and three-dimensional assemblies. The electrodes, with separations that vary from 35 to 300 num, are made of gold deposited on glass substrata. Latex, silica and graphite particles have been examined inside organic or aqueous media in order to illustrate the general applicability of the technique. Theoretical predictions of the particle response under the electric fields are experimentally confirmed for all the above particle/media combinations and can thus be used as a valuable design tool. The size and shape of the final structures are mainly dependent on the electrode shape and dimensions, but are also subject to the particle type and operating conditions. Particle organization in one dimension (strings) is achieved under conditions of positive or negative dielectrophoresis in the space between two energized electrodes. Two-dimensional particle organization (ordered, planar particles assemblies) was observed under conditions of negative dielectrophoresis, when quadrupole electrodes were employed. Moreover, when negative dielectrophoresis and stronger electric fields are applied (of the order of 50 kV(rms) m(-1)), three-dimensional, pyramid-like structures with a vertical dimension 1000-fold higher than that of the corresponding (planar) electrodes can be assembled. These 3-D structures can grow as free-standing assemblies, or inside templates etched in the substratum. The dielectrophoresis (DEP)-organized particle assemblies can subsequently be rendered permanent via the in situ fixing (cross-linking) of the individual particles.     

Microfluidic device embedding electrodes for dielectrophoretic manipulation of cells‐A review

Microfluidic device embedding electrodes realizes cell manipulation with the help of dielectrophoresis. Cell manipulation is an important technology for cell sorting and cell population purification. Till now, the theory of dielectrophoresis has been greatly developed. Microfluidic devices with various arrangements of electrodes have been reported from the beginning of the single non‐uniform electric field to the later multiple physical fields. This paper reviews the research status of microfluidic device embedding electrodes for cell manipulation based on dielectrophoresis. Firstly, the working principle of dielectrophoresis is explained. Next, cell manipulation approaches based on dielectrophoresis are introduced. Then, different types of electrode arrangements in the microfluidic device for cell manipulation are discussed, including planar, multilayered and microarray dot electrodes. Finally, the future development trend of the dielectrophoresis with the help of microfluidic devices is prospected. With the rapid development of microfluidic technology, in the near future, high precision, high throughput, high efficiency, multifunctional, portable, economical and practical microfluidic dielectrophoresis will be widely used in the fields of biology, medicine, agriculture and so on.     

A hybrid dielectrophoretic and hydrophoretic microchip for particle sorting using integrated prefocusing and sorting steps

This work explores dielectrophoresis (DEP)‐active hydrophoresis in sorting particles and cells. The device consists of prefocusing region and sorting region with great potential to be integrated into advanced lab‐on‐a‐chip bioanalysis devices. Particles or cells can be focused in the prefocusing region and then sorted in the sorting region. The DEP‐active hydrophoretic sorting is not only based on size but also on dielectric properties of the particles or cells of interest without any labelling. A mixture of 3 and 10 μm particles were sorted and collected from corresponding outlets with high separation efficiency. According to the different dielectric properties of viable and nonviable Chinese Hamster Ovary (CHO) cells at the medium conductivity of 0.03 S/m, the viable CHO cells were focused well and sorted from cell sample with a high purity.     

On-chip microfluidic buffer swap of biological samples in-line with downstream dielectrophoresis

Microfluidic cell enrichment by dielectrophoresis, based on biophysical and electrophysiology phenotypes, requires that cells be resuspended from their physiological media into a lower conductivity buffer for enhancing force fields and enabling the dielectric contrast needed for separation. To ensure that sensitive cells are not subject to centrifugation for resuspension and spend minimal time outside of their culture media, we present an on-chip microfluidic strategy for swapping cells into media tailored for dielectrophoresis. This strategy transfers cells from physiological media into a 100-fold lower conductivity media by using tangential flows of low media conductivity at 200-fold higher flow rate versus sample flow to promote ion diffusion over the length of a straight channel architecture that maintains laminarity of the flow-focused sample and minimizes cell dispersion across streamlines. Serpentine channels are used downstream from the flow-focusing region to modulate hydrodynamic resistance of the central sample outlet versus flanking outlets that remove excess buffer, so that cell streamlines are collected in the exchanged buffer with minimal dilution in cell numbers and at flow rates that support dielectrophoresis. We envision integration of this on-chip sample preparation platform prior to or post-dielectrophoresis, in-line with on-chip monitoring of the outlet sample for metrics of media conductivity, cell velocity, cell viability, cell position, and collected cell numbers, so that the cell flow rate and streamlines can be tailored for enabling dielectrophoretic separations from heterogeneous samples.