A synthesis of porous activated carbon materials derived from vitamin B9 base for CO2 capture and conversion

CO₂ capture and conversion are still a favorable way to reduce CO₂ in the atmosphere. Herein, we have developed an environmentally friendly, low energy consumption porous activated carbon from vitamin B9 carbonaceous material for CO₂ capture and conversion materials. It is demonstrated that the KOH/vitamin B9 carbonaceous material impregnation ratio of 2 is the optimum condition for obtaining porous activated carbons with high specific surface area of 1903 m²g^-1, micropore surface area of 710 m²g^-1, total pore volume of 1.05 cm³g^-1 and micropore volume of 0.38 cm³g^-1. Among all the porous activated carbons prepared, the porous activated carbon synthesized with the KOH/vitamin B9 carbonaceous material impregnation ratio of 2 registers the most excellent CO₂ capture for 5.41 mmolg^?1 at 0 °C/1 bar and 3.66 mmolg^?1 at 25 °C/1 bar. They can also effectively catalyze the cycloaddition of CO₂ and epoxides under mild conditions (1 bar, 100 °C and 8 h) with a yield of 89–94%. The synthesized porous carbon materials from vitamin B9 is a promising candidate material for CO₂ capture and fixation.     

Boron‐Functionalized Graphene Oxide‐Organic Frameworks for Highly Efficient CO2 Capture

The capture and storage of CO₂ have been suggested as an effective strategy to reduce the global emissions of greenhouse gases. Hence, in recent years, many studies have been carried out to develop highly efficient materials for capturing CO₂. Until today, different types of porous materials, such as zeolites, porous carbons, N/B‐doped porous carbons or metal‐organic frameworks (MOFs), have been studied for CO₂ capture. Herein, the CO₂ capture performance of new hybrid materials, graphene‐organic frameworks (GOFs) is described. The GOFs were synthesized under mild conditions through a solvothermal process using graphene oxide (GO) as a starting material and benzene 1,4‐diboronic acid as an organic linker. Interestingly, the obtained GOF shows a high surface area (506 m² g⁻¹) which is around 11 times higher than that of GO (46 m² g⁻¹), indicating that the organic modification on the GO surface is an effective way of preparing a porous structure using GO. Our synthetic approach is quite simple, facile, and fast, compared with many other approaches reported previously. The synthesized GOF exhibits a very large CO₂ capacity of 4.95 mmol g⁻¹ at 298 K (1 bar), which is higher those of other porous materials or carbon‐based materials, along with an excellent CO₂/N₂ selectivity of 48.8.     

Effect of Building Block Transformation in Covalent Triazine-Based Frameworks for Enhanced CO2 Uptake and Metal-Free Heterogeneous Catalysis

Covalent triazine frameworks (CTFs) have provided a unique platform in functional material design for a wide range of applications. This work reports a series of new CTFs with two new heteroaromatic building blocks (pyrazole and isoxazole groups) through a building-block transformation approach aiming for carbon capture and storage (CCS) and metal-free catalysis. The CTFs were synthesized from their respective building blocks [(4,4′-(1H-pyrazole-3,5-diyl)dibenzonitrile (pyz) and 4,4′-(isoxazole-3,5-diyl)dibenzonitrile (isox))] under ionothermal conditions using ZnCl₂. Both of the building blocks were designed by an organic transformation of an acetylacetone containing dinitrile linker to pyrazole and isoxazole groups, respectively. Due to this organic transformation, (i) linker aromatization, (ii) higher surface areas and nitrogen contents, (iii) higher aromaticity, and (iv) higher surface basicity was achieved. Due to these enhanced properties, CTFs were explored for CO₂ uptake and metal-free heterogeneous catalysis. Among all, the isox-CTF, synthesized at 400 °C, showed the highest CO₂ uptake (4.92 mmol g⁻¹ at 273 K and 2.98 mmol g⁻¹ at 298 K at 1 bar). Remarkably, these CTFs showed excellent metal-free catalytic activity for the aerobic oxidation of benzylamine at mild reaction conditions. On studying the properties of the CTFs, it was observed that organic transformations and ligand aromatization of the materials are crucial factor to tune the important parameters that influence the CO₂ uptake and the catalytic activity. Overall, this work highlights the substantial effect of designing new CTF materials by building-block organic transformations resulting in better properties for CCS applications and heterogeneous catalysis.     

Salen–Mg-doped NH2–MIL-101(Cr) for effective CO2 adsorption under ambient conditions

A novel metal-doped metal–organic framework (MOF) was developed by incorporating salen–Mg into NH₂–MIL-101(Cr) structure under ambient conditions. The Schiff base complex was successfully prepared by condensing salicylaldehyde with a free amino group and then coordinating metal ions. Such a structure can endow the sample with higher CO₂ adsorption performance. At 0°C and 1 bar, the salen–Mg-modified sample achieves the maximum adsorption capacity of 2.18 mmol g⁻¹ for CO₂, which was 5.8% higher than the pristine salen–MOF under the same conditions. Notably, the Freundlich model indicates that the CO₂ adsorption process of all samples conforms to reversible adsorption. However, the correlation coefficients (R²) of the Mg-doped sample are lower than that of the pristine sample. Besides, the CO₂/N₂ adsorption selectivity and isosteric heat also show a similar trend. These results indicate that the salen–Mg can enhance the interaction between the material and CO₂ molecules.     

From Discrete Molecular Cages to a Network of Cages Exhibiting Enhanced CO2 Adsorption Capacity

We have adopted the concept of “cage to frameworks” to successfully produce a Na–N connected coordination networked cage Na‐NC1 by using a [3+6] porous imine‐linked organic cage NC1 (Nanjing Cage 1) as the precursor. It is found that Na‐NC1 exhibits hierarchical porosity (inherent permanent voids and interconnected channel) and gas sorption measurements reveal a significantly enhanced CO₂ uptake (1093 cm³ g⁻¹ at 23 bar and 273 K) than that of NC1 (162 cm³ g⁻¹ under the same conditions). In addition, Na‐NC1 exhibits very low CO₂ adsorption enthalpy making it a good candidate for porous materials with both high CO₂ storage and low adsorption enthalpy.     

An Azine‐Linked Covalent Organic Framework: Synthesis,Characterization and Efficient Gas Storage

A azine‐linked covalent organic framework, COF‐JLU2, was designed and synthesized by condensation of hydrazine hydrate and 1,3,5‐triformylphloroglucinol under solvothermal conditions for the first time. The new covalent organic framework material combines permanent micropores, high crystallinity, good thermal and chemical stability, and abundant heteroatom activated sites in the skeleton. COF‐JLU2 possesses a moderate BET surface area of over 410 m² g^?1 with a pore volume of 0.56 cm³ g^?1. Specifically, COF‐JLU2 displays remarkable carbon dioxide uptake (up to 217 mg g^?1) and methane uptake (38 mg g^?1) at 273 K and 1 bar, as well as high CO₂/N₂ (77) selectivity. Furthermore, we further highlight that it exhibits a higher hydrogen storage capacity (16 mg g^?1) than those of reported COFs at 77 K and 1 bar.     

Rational Design and Synthesis of Hybrid Porous Polymers Derived from Polyhedral Oligomeric Silsesquioxanes via Heck Coupling Reactions

Heck coupling reactions are introduced as an efficient method to prepare porous polymers. Novel inorganic‐organic hybrid porous polymers (HPPs) were constructed via Heck coupling reactions from cubic functional polyhedral oligomeric silsesquioxanes (POSS), iodinated octaphenylsilsesquioxanes (OPS) and octavinylsilsesquioxanes (OVS) using Pd(OAc)₂/PPh₃ as the catalyst. Here, two iodinated OPS were used, IOPS and p‐I₈OPS. IOPS was a mixture with 90% octasubstituted OPS (I₈) and some nonasubstituted OPS (I₉), while p‐I₈OPS was a nearly pure compound with ≥99% I₈ and ≥93% para‐substitution. IOPS and p‐I₈OPS reacted with OVS to produce the porous materials HPP‐1 and HPP‐2, which exhibited comparable specific surface areas with S_BET of 418 ± 20 m² g⁻¹ and 382 ± 20 m² g⁻¹, respectively, with total pore volumes of 0.28 ± 0.01 cm³ g⁻¹ and 0.23 ± 0.01 cm³ g⁻¹, respectively. HPP‐1 showed a broader pore size distribution and possessed a more significant contribution from the mesopores, when compared with HPP‐2, thereby indicating that IOPS may induce more disorder because of the geometrical asymmetry. HPP‐1 and HPP‐2 possessed moderate carbon dioxide uptakes of 134 and 124 cm³ g⁻¹ at 1 bar at 195 K, making them promising candidates for CO₂ capture and storage. The synthesized porous polymers may be easily post‐functionalized using the retained ethenylene groups.

     

Carbon Aerogels Synthesizd with Cetyltrimethyl Ammonium Bromide (CTAB) as a Catalyst and its Application for CO2 Capture

A series of carbon aerogels were synthesized by polycondensation of resorcinol and formaldehyde using cetyltrimethyl ammonium bromide (CTAB) as a catalyst. The structure and properties of carbon aerogels were characterized by X‐ray diffraction (XRD), Raman, scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT‐IR), and N₂ adsorption‐desorption technologies. Besides, the CO₂ capture behavior of carbon aerogels was also investigated. It was found that the amount of CTAB affected the structure and morphology of carbon aerogels, thus influenced the CO₂ adsorption behavior. The sample CA‐125 (the ratio of resorcinol and CTAB is 125) had the highest CO₂ adsorption capacity (63.71 cm³ · g^–1 at 1 bar and 24.14 cm³ · g^–1 at 0.15 bar) at 25 °C. In addition, the higher CO₂ adsorption capacity was ascribed to the higher surface area, pore volume and appropriate pore size, as well as the more defects over carbon aerogels.     

Synthesizing Interpenetrated Triazine-based Covalent Organic Frameworks from CO2

Crystalline triazine-based covalent organic frameworks (COFs) are aromatic nitrogen-rich porous materials. COFs typically show high thermal/chemical stability, and are promising for energy applications, but often require harsh synthesis conditions and suffer from low crystallinity. In this work, we propose an environmentally friendly route for the synthesis of crystalline COFs from CO₂ molecules as a precursor. The mass ratio of CO₂ conversion into COFs formula unit reaches 46.3 %. The synthesis consists of two steps; preparation of 1,4-piperazinedicarboxaldehyde from CO₂ and piperazine, and condensation of the dicarboxaldehyde and melamine to construct the framework. The CO₂-derived COF has a 3-fold interpenetrated structure of 2D layers determined by powder X-ray diffraction, high-resolution transmission electron microscopy, and select-area electron diffraction. The structure shows a high Brunauer–Emmett–Teller surface area of 945 m² g⁻¹ and high stability against strong acid (6 M HCl), base (6 M NaOH), and boiling water over 24 hours. Post-modification of the framework with oxone has been demonstrated to modulate hydrophilicity, and it exhibits proton conductivity of 2.5×10⁻² S cm⁻¹ at 85 °C, 95 % of relative humidity.     

Synthesis of High‐Surface‐Area Nitrogen‐Doped Porous Carbon Microflowers and Their Efficient Carbon Dioxide Capture Performance

Sustainable carbon materials have received particular attention in CO₂ capture and storage owing to their abundant pore structures and controllable pore parameters. Here, we report high‐surface‐area hierarchically porous N‐doped carbon microflowers, which were assembled from porous nanosheets by a three‐step route: soft‐template‐assisted self‐assembly, thermal decomposition, and KOH activation. The hydrazine hydrate used in our experiment serves as not only a nitrogen source, but also a structure‐directing agent. The activation process was carried out under low (KOH/carbon=2), mild (KOH/carbon=4) and severe (KOH/carbon=6) activation conditions. The mild activated N‐doped carbon microflowers (A‐NCF‐4) have a hierarchically porous structure, high specific surface area (2309 m² g^?1), desirable micropore size below 1 nm, and importantly large micropore volume (0.95 cm³ g^?1). The remarkably high CO₂ adsorption capacities of 6.52 and 19.32 mmol g^?1 were achieved with this sample at 0 °C (273 K) and two pressures, 1 bar and 20 bar, respectively. Furthermore, this sample also exhibits excellent stability during cyclic operations and good separation selectivity for CO₂ over N₂.     

A Microporous Hydrogen Bonded Organic Framework for Highly Selective Separation of Carbon Dioxide over Acetylene

The separation of acetylene (C₂H₂) from carbon dioxide (CO₂) is a very important but challenging task due to their similar molecular dimensions and physical properties. In terms of porous adsorbents for this separation, the CO₂-selective porous materials are superior to the C₂H₂-selective ones because of the cost- and energy-efficiency but have been rarely achieved. Herein we report our unexpected discovery of the first hydrogen bonded organic framework (HOF) constructed from a simple organic linker 2,4,6-tri(1H-pyrazol-4-yl)pyridine (PYTPZ) (termed as HOF-FJU-88) as the highly CO₂-selective porous material. HOF-FJU-88 is a two-dimensional HOFs with a pore pocket of about 7.6 Å. The activated HOF-FJU-88 takes up a high amount of CO₂ (59.6 cm³ g⁻¹) at ambient conditions with the record IAST selectivity of 1894. Its high performance for the CO₂/C₂H₂ separation has been further confirmed through breakthrough experiments, in situ diffuse reflectance infrared spectroscopy and molecular simulations.     

De-Linker-Enabled Exceptional Volumetric Acetylene Storage Capacity and Benchmark C2H2/C2H4 and C2H2/CO2 Separations in Metal–Organic Frameworks

An ideal adsorbent for separation requires optimizing both storage capacity and selectivity, but maximizing both or achieving a desired balance remain challenging. Herein, a de-linker strategy is proposed to address this issue for metal–organic frameworks (MOFs). Broadly speaking, the de-linker idea targets a class of materials that may be viewed as being intermediate between zeolites and MOFs. Its feasibility is shown here by a series of ultra-microporous MOFs (SNNU-98-M, M=Mn, Co, Ni, Zn). SNNU-98 exhibit high volumetric C₂H₂ uptake capacity under low and ambient pressures (175.3 cm³ cm⁻³ @ 0.1 bar, 222.9 cm³ cm⁻³ @ 1 bar, 298 K), as well as extraordinary selectivity (2405.7 for C₂H₂/C₂H₄, 22.7 for C₂H₂/CO₂). Remarkably, SNNU-98-Mn can efficiently separate C₂H₂ from C₂H₂/CO₂ and C₂H₂/C₂H₄ mixtures with a benchmark C₂H₂/C₂H₄ (1/99) breakthrough time of 2325 min g⁻¹, and produce 99.9999 % C₂H₄ with a productivity up to 64.6 mmol g⁻¹, surpassing values of reported MOF adsorbents.     

Eutectic Molten Salt Synthesis of Highly Microporous Macrocyclic Porous Organic Polymers for CO2 Capture

The development of porous materials is of great interest for the capture of CO₂ from various emission sources, which is essential to mitigate its detrimental environmental impact. In this direction, porous organic polymers (POPs) have emerged as prime candidates owing to their structural tunability, physiochemical stability and high surface areas. In an effort to transfer an intrinsic property of a cyclotetrabenzoin-derived macrocycle – its high CO₂ affinity – into porous networks, herein we report the synthesis of three-dimensional (3D) macrocycle-based POPs through the polycondensation of an octaketone macrocycle with phenazine-2,3,7,8-tetraamine hydrochloride. This polycondensation was performed under ionothermal conditions, using a eutectic salt mixture in the temperature range of 200 to 300 °C. The resulting polymers, named 3D-mmPOPs, showed reaction temperature-dependent surface areas and gas uptake properties. 3D-mmPOP-250 synthesized at 250 °C exhibited a surface area of 752 m² g⁻¹ and high microporosity originating from the macrocyclic units, thus resulting in an excellent CO₂ binding enthalpy of 40.6 kJ mol⁻¹ and CO₂ uptake capacity of 3.51 mmol g⁻¹ at 273 K, 1.1 bar.     

Oxyalkylene polymers with alkylsulfonylmethyl side chains: Gas barrier properties

Gas barrier properties of alkylsulfonylmethyl-substituted poly(oxyalkylene)s are discussed. Oxygen permeability coefficients of three methylsulfonylmethyl-substituted poly(oxyalkylene)s, poly[oxy(methylsulfonylmethyl)ethylene] (MSE), poly[oxy(methylsulfonylmethyl)ethylene-co-oxyethylene] (MSEE), and poly[oxy-2,2-bis (methylsulfonylmethyl)trimethylene oxide] (MST) were measured. MSEE, which has the most flexible backbone of the three polymers, had an oxygen permeability coefficient at 30°C of 0.0036 × 10⁻¹³ cm³(STP)·cm/cm²·s·Pa higher than that of MSE, 0.0014 × 10⁻¹³ cm³(STP)·cm/cm²·s·Pa, because the former polymer's T_g was near room temperature. MST with two polar groups per repeat unit and the highest T_g showed the highest oxygen permeability, 0.013 × 10⁻¹³ cm³(STP) · cm/cm²·s·Pa, among the three polymers, probably because steric hindrance between the side chains made the chain packing inefficient. As the side chain length of poly[oxy(alkylsulfonylmethyl)ethylene] increased, T_g and density decreased and the oxygen permeability coefficients increased. The oxygen permeability coefficient of MSE at high humidity (84% relative humidity) was seven times higher than when it was dry because absorbed water lowered its T_g. At 100% relative humidity MSE equilibrated to a T_g of 15°C after 2 weeks. A 50/50 blend of MSE/MST had oxygen barrier properties better than the individual polymers (O₂ permeability coefficient is 0.0007 × 10⁻¹³ cm³(STP)·cm/cm² ·s·Pa), lower than most commercial high barrier polymers. At 100% relative humidity, it equilibrated to a T_g of 42°C, well above room temperature. These are polymer systems with high gas barrier properties under both dry and wet conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 75–83, 1998     

Tuning of Microenvironment in Covalent Organic Framework via Fluorination Strategy promotes Selective CO2 Capture

Herein, we have designed and synthesized two heteroatom (N, O) rich covalent organic frameworks (COF), PD-COF and TF-COF , respectively, to demonstrate their relative effect on CO₂ adsorption capacity and also CO₂/N₂ selectivity. Compared to the non-fluorinated PD-COF (BET surface area 805 m² g⁻¹, total pore volume 0.3647 ccg⁻¹), a decrease in BET surface area and also pore volume have been observed for fluorinated TF-COF due to the incorporation of fluorine to the porous framework (BET surface area 451 m² g⁻¹, total pore volume 0.2978 ccg⁻¹). This fact leads to an enormous decrease in the CO₂ adsorption capacity and CO₂/N₂ selectivity of TF-COF , though it shows stronger affinity towards CO₂ with a Qst of 37.76 KJ/mol. The more CO₂ adsorption capacity by PD-COF can be attributed to the large specific surface area with considerable amount of micropore volume compared to the TF-COF . Further, PD-COF exhibited CO₂/N₂ selectivity of 16.8, higher than that of TF-COF (CO₂/N₂ selectivity 13.4).     

Superprotonic Conductivity of MOFs Confining Zwitterionic Sulfamic Acid as Proton Source and Conducting Medium

A few metal–organic frameworks (MOFs), which typically use strong acids as proton sources, display superprotonic conductivity (≈10⁻¹ S cm⁻¹); however, they are rare due to the instability of MOFs in highly acidic conditions. For the first time, we report superprotonic conductivity using a moderately acidic guest, zwitterionic sulfamic acid (HSA), which is encapsulated in MOF-808 and MIL-101. HSA acts not only as a proton source but also as a proton-conducting medium due to its extensive hydrogen bonding ability and zwitterion effect. A new sustained concentration gradient method results in higher HSA encapsulation compared to conventional methods, producing 10HSA@MOF-808-(bSA)₂ and 8HSA@MIL-101. These MOFs show impressive superprotonic conductivity of 2.47×10⁻¹ and 3.06×10⁻¹ S cm⁻¹, respectively, at 85 °C and 98 % relative humidity, and maintain stability for 7 days.     

When High-Temperature Cesium Chemistry Meets Self-Templating: Metal Acetates as Building Blocks of Unusual Highly Porous Carbons

Self-templating is a facile strategy for synthesizing porous carbons by direct pyrolysis of organic metal salts. However, the method typically suffers from low yields (<4%) and limited specific surface areas (SSA<2000 m² g⁻¹) originating from low activity of metal cations (e.g., K⁺ or Na⁺) in promoting construction and activation of carbon frameworks. Here we use cesium acetate as the only precursor of oxo-carbons with large SSA of the order of 3000 m² g⁻¹, pore volume approaching 2 cm³ g⁻¹, tunable oxygen contents, and yields of up to 15 %. We unravel the role of Cs⁺ as an efficient promoter of framework formation, templating and etching agent, while acetates act as carbon/oxygen sources of carbonaceous frameworks. The oxo-carbons show record-high CO₂ uptake of 8.71 mmol g⁻¹ and an ultimate specific capacitance of 313 F g⁻¹ in the supercapacitor. This study helps to understand and rationally tailor the materials design by a still rare organic solid-state chemistry.     

Direct Observation of Intermediates in the Reaction of Peroxynitrite with Carbon Dioxide

Peroxynitrite (ONOO⁻, oxoperoxonitrate(1−)) reacts with carbon dioxide to form an adduct that absorbs with a maximum at 640 nm and an extinction coefficient of ca. 2 × 10² M ⁻¹ cm⁻¹. Within 0.1 s at 4°, this absorption decreases while the maximum is shifted to lower wavelengths, which indicates that trioxocarbonate(1−) radicals (CO₃^.−) are formed. This interpretation is supported by the observation of a weak ESR signal at g=2.013.     

Synthesis and Gas Adsorption Properties of Tetra‐Armed Microporous Organic Polymer Networks Based on Triphenylamine

Two novel tetra‐armed microporous organic polymers have been designed and synthesized via a nickel‐catalyzed Yamamoto‐type Ullmann cross‐coupling reaction or Suzuki cross‐coupling polycondensation. These polymers are stable in various solvents, including concentrated hydrochloric acid, and are thermally stable. The homocoupled polymer YPTPA shows much higher Brunauer–Emmet–Teller‐specific surface area up to 1557 m² g⁻¹ than the copolymer SPTPA (544 m² g⁻¹), and a high CO₂ uptake ability of 3.03 mmol g⁻¹ (1.13 bar/273 K) with a CO₂/N₂ sorption selectivity of 17.3:1. Both polymers show high isosteric heats of CO₂ adsorption (22.7–26.5 kJ mol⁻¹) because the incorporation of nitrogen atoms into the skeleton of microporous organic polymers enhances the interaction between the pore wall and the CO₂ molecules. The values are higher than those of the porous aromatic frameworks, which contain neither additional polar functional groups nor nitrogen atoms, and are rather close to those of previously reported microporous organic polymers containing the nitrogen atoms on the pore wall. These data show that these materials would be potential candidates for applications in post‐combustion CO₂ capture and sequestration technology.

     

Rate constants for the reactions of Cl atoms with HCOOH and with HOCO radicals

Rate constants have been measured at room temperature for the reactions of Cl atoms with formic acid and with the HOCO radical: Cl + HCOOH → HCl + HOCO (R1) Cl + HOCO → HCl + CO₂ (R2) Cl atoms were generated by flash photolysis of Cl₂ and the progress of reaction was followed by time‐resolved infrared absorption measurements using tunable diode lasers on the CO₂ that was formed either in the pair of reactions ( R1 ) plus ( R2 ), or in reaction ( R1 ) followed by O₂ + HOCO → HO₂ + CO₂ (R3) In a separate series of experiments, conditions were chosen so that the kinetics of CO₂ formation were dominated either by the rate of reaction ( R1 ) or by that of reactions ( R1 ) and ( R2 ) combined. The results of our analysis of these experiments yielded: k₁ = (1.8₃ ± 0.12) × 10⁻¹³ cm³ molecule⁻¹ s⁻¹ k₂ = (4.8 ± 1.0) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 85–91, 2000