Synthesis of Sub-100 nm Nanoparticles by Emulsifier-free Emulsion Polymerization of α-Methylstyrene,Methyl Methacrylate and Acrylic Acid

The emulsifier-free emulsion copolymerization of α-methylstyrene (AMS) and methyl methacrylate (MMA) in the presence of functional monomer acrylic acid (AA) was carried out in batch process, giving birth to sub-100 nm nanoparticles. The kinetics of polymerization was investigated. The morphology and size of particles were monitored by TEM. The influences of the functional monomer AA concentration, initiator ammonium persulfate (APS) concentration, and polymerization temperature were studied. It was found that AMS caused a drastic decrease in both the rate of polymerization and the average degree of polymerization. The activation energy calculated from Arrhenius plot turned out to be 83.6 kJ/mol.     

Studies on Upconversion Mechanism of ZrO2∶Er3+,Yb3+ Nanocrystals Under Excitation at 488 and 980 nm

Erbium, Ytterbium-codoped ZrO2 nanoparticles(ZrO2∶Er3 ,Yb3 ) were prepared by the sol-emulsion-gel technique. The purpose of the present study is the application of upconversion phosphor in the biological label. In order to make out the mechanism of upconversion under 980 nm excitation the 488 nm pump was used. The influence of temperature on the crystallite phase was studied. The results confirm the upconverted mechanism in ZrO2∶Er3 ,Yb3 nanocrystals is due to an energy transfer upconversion(ETU).     

Studies on Upconversion Mechanism of ZrO2 ： Er^3＋, Yb^3＋ Nanocrystals Under Excitation at 488 and 980 nm

Erbium, Ytterbium-codoped ZrO2 nanoparticles(ZrO2:Er^3 ,Yb^3 ) were prepared by the sol-emulsiongel technique. The purpose of the present study is the application of upconversion phosphor in the biological label. In order to make out the mechanism of upconversion under 980 nm excitation the 488 nm pump was used. The influence of temperature on the crystallite phase was studied. The results confirm the upconverted mechanism in ZrO2:Er^3 ,Yb^3 nanocrystals is due to an energy transfer upconversion(ETU).     

Studies on Upconversion Mechanism of ZrO_2∶Er~(3+),Yb~(3+) Nanocrystals Under Excitation at 488 and 980 nm

IntroductionWith a suitable host matrix,the rare earth( RE) dopant ions can convert the lower energyphotons into higher- energy ones.Upconversionprocess is intensively investigated in order to obtainnew powdered phosphors and visible solid- statelasers.Recently,the upconverting phosphor tech-nology ( UPT) has been applied to producing thelateral flow test strips[1,2 ] .Upconverting phosphoris the same usefull biological label as quantumdot[3 ] .RE ions,especially erbium,due to its energylev…     

Boric Acid–Mediated Mild and Efficient Friedel–Crafts Alkylation of Indoles with Nitro Styrenes

An efficient method has been developed for the synthesis of indole 3-derivatives by the Friedel–Crafts alkylation of indole with nitro olefins in presence of boric acid in aqueous medium.     

Ionic Liquid–Mediated Knoevenagel Condensation of Meldrum's Acid and Aldehydes

A simple, efficient, and green protocol for Knoevenagel condensation of Meldrum's acid and aldehydes in ionic liquid at room temperature without any catalyst is described. The reaction has been performed in different ionic liquids. The enhancement in the rate is observed in Brönsted acidic ionic liquid 1‐methylimidazolium trifluoroacetate [Hmim]Tfa, which furnishes quantitative yields with 4–30 min in most of the cases. Furthermore, ionic liquid is easily reused without any appreciable loss in activity.     

Synthesis of Cu@Ag Nanoparticles with a Core–Shell Structure Stabilized with Oxyethylated Carboxylic Acid

Russian Journal of General Chemistry - Bimetallic Cu@Ag nanoparticles with a core–shell structure were synthesized by reduction of copper 2-[2-(2-methoxyethoxy)ethoxy]acetate with hydrazine...     

Indirect Determination of Ascorbic Acid with Ammonium Sulfate and Isopropyl Alcohol by Extraction-flotation of Copper

A new method of indirect determination of ascorbic acid(Vc) with ammonium sulfateand isopropyl alcohol by extraction-flotation of copper is studied in this paper. It shows that asmall amount of Cu( II ) can be reduced to Cu( I ) by Vc, then Cu( I ) reacted with the SCN-,which precipitated on the interface of isopropyl alcohol and H2O. A good linear relationshin is observed between the flotation yield(E) of Cu( II ) and the amount of Vc. The detection limi(forVc is 1.76 μg/mL. The method is simple, rapid (5 rain), but suffers from little interference of common anions and cations. It has been successfully applied for the determination of Vc in fruits.     

Lewis Acid–Mediated Domino Reaction of 3-Bromomethylthiophenes with Arenes/Heteroarenes

Lewis acid–mediated domino reaction of 3-bromomethylthiophenes with various types of arenes and heteroarenes is reported.     

Generation of α-Boryl Radicals and Their Conjugate Addition to Enones: Transition-Metal-Free Alkylation of gem-Diborylalkanes

A transition-metal-free method for the alkylation of gem-diborylalkanes with α,β-unsaturated ketones has been developed. It is demonstrated that the α-boryl radicals can be generated efficiently from gem-diborylalkanes with the aid of catechol and oxidants. The α-boryl radicals formed through such process can be engaged in conjugate addition reaction with α,β-unsaturated ketones. This transformation is a straightforward method for the synthesis of γ-borylketones.     

Synthesis and Catalytic Activity of Copper （Ⅱ） Resorcylic Acid Nanoparticles

IntroductionCopper(Ⅱ) resorcylic acid is a type of conven-tional burning rate catalyst commonly used in solid pro-pellant. Burning rate is considered as an important pa-rameter in the performance of solid propellant. Recentliterature has shown that the b…     

Synthesis and Catalytic Activity of Copper(Ⅱ) Resorcylic Acid Nanoparticles

Copper(Ⅱ) resorcylic acid(CuRes) nanoparticles were synthesized by using reactive precipitation method with resorcylic acid and blue copperas as the raw material in a rotating packed bed. The sample obtained was characterized by using X-ray diffraction( XRD), transmission electron microscopy( TEM ), Fourier transform infrared spectroscopy (FTIR), thermo-gravimetric analyses (TG), and element analysis. In addition, the catalytic activity of CuRes nanoparticles on the thermal decomposition of nitrocellulose-nitroglycerine (NC-NG) was also determined via DSC.The results show that the spherical nanoparticles with a diameter of 20 nm were obtained in ethanol solution. The peak temperature of the thermal decomposition of NC-NG-CuRes decreases by 3 ℃ compared with that of normal CuRes,and the decomposition enthalpy is increased by 735 J/g, and therefore, it is reasonable to assume that CuRes nanoparticles have a better catalytic activity.     

Generation of hydrogen by hydroreactive compositions with γ-irradiated aluminum

The kinetics of hydrogen generation by heterogeneous hydroreactive compositions with aluminum, which was preliminarily γ-irradiated in air, held in aqueous solutions at room temperature, and annealed at a high temperature, was studied. Changes in the hydrogen generation kinetics depending on the γ-radiation dose, the composition of aqueous solution, and the temperature are caused by the conversion of aluminum oxide coatings, which should be taken into account in the prediction of the corrosion resistance of structural materials under the conditions of exposures at nuclear power plants.     

1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

Spectroscopic and Spectroelectrochemical Studies of Interaction of Nile Blue with DNA

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｇｅｎｅｒａｌｌｙａｃｃｅｐｔｅｄｔｏｄａｙｔｈａｔｔｈｅｒｅａｒｅｔｈｒｅｅｋｉｎｄｓｏｆｂｉｎｄｉｎｇｍｏｄｅｌｓｆｏｒｓｍａｌｌｍｏｌｅｃｕｌｅｓｔｏＤＮＡ ,ｗｈｉｃｈｒｅｆｅｒｔｏｉｎｔｅｒｃａｌａｔｉｖｅｂｉｎｄｉｎｇ ,ｇｒｏｏｖｅｂｉｎｄｉｎｇａｎｄｅｌｅｃｔｒｏｓｔａｔｉｃｂｉｎｄｉｎｇ .Ｉｎｔｈｅｓｅｂｉｎｄｉｎｇｍｏｄｅｌｓ ,ｔｈｅｉｎｔｅｒ ｃａｌａｔｉｖｅｂｉｎｄｉｎｇｉｓｔｈｏｕｇｈｔａｓｔｏｂｅｔｈｅｓｔｒｏｎｇｅｓｔｂｉｎｄｉｎｇｂｅｃ…     

Trichloroisocyanuric Acid–Mediated One-Pot Synthesis of Unsymmetrical 2,5-Disubstituted 1,3,4-Oxadiazoles at Ambient Temperature

An efficient method for the one-pot synthesis of unsymmetrical 2,5-disubstituted 1,3,4-oxadiazoles has been developed using trichloroisocyanuric acid (TCCA) at ambient temperature. A wide variety of aromatic as well as heterocyclic aldehydes exhibit condensation with a variety of acylhydrazines followed by oxidative cyclization to yield corresponding unsymmetrical 2,5-disubstituted 1,3,4-oxadiazoles. The mild nature of the synthesis and short reaction time are notable advantages of the developed protocol.     

Crystal Structures of β-Cyclodextrin Complexes with Formic Acid and Acetic Acid

β-Cyclodextrin (β–CD)-formic acid (1) andβ-CD–acetic acid (2) inclusion complexes crystallizeas β-CD...0.3HCOOH...7.7H₂O andβ-CD...0.4CH₃COOH...7.7H₂O in themonoclinic space group P2₁ with comparable unit cell constants.Anisotropic refinement of atomic parameters against X-ray diffractiondata with F_o ² > 2σ (F_o ²) (986/8563 and 991/8358)converged at R-factors of 0.051 and 0.054 for 1 and 2,respectively. In both complexes, the β-CD molecularconformation, hydration pattern and crystal packing are similar,but the inclusion geometries of the guest molecules are different.The β-CD macrocycles adopt a ``round'' conformationstabilized by intramolecular, interglucose O3(n)...O2(n + 1)hydrogen bonds and their O6–H groups are systematically hydratedby water molecules. In the asymmetric unit, each complex contains oneβ-CD, 0.3 formic acid (or 0.4 acetic acid), and 7.7 water moleculesthat are distributed over 9 positions. Water sites located in theβ-CD cavity hydrogen bond to the guest molecule. In thecrystal lattice, β-CD molecules are packed in a typical ``herringbone'' fashion. In 1, the formic acid (occupancy 0.3) is entirely included in the β-CD cavity such that its C atom is shifted from the O4-plane center to the β-CD O6-side by 2.90 Å and C=O, C–-O bonds point to this side. In 2, the acetic acid (occupancy 0.4) is completely embedded in the β-CD cavity, in which the carboxylic C atom is displaced from the O4-plane centerto the β-CD O6-side by 0.87 Å; the C=O bond directsto the β-CD O6-side and makes an angle of 15°to the β-CD molecular axis. Furthermore, bothdimethyl-β-CD-acetic acid and β-CD-acetic acidcomplexes form a cage structure, showing that the small guestsenclosed entirely in the cavity either in β-CD or indimethyl-β-CD do not affect the packing of the host macrocycles.     

Synthesis and Characterization of the Terpolymer of Itaconic Acid with Acrylamide and 2-Acrylamido-2-methylpropanesulfonic Acid

The thermal stability of the polymer is of great significance in paper, ceramics and oil industry1. Conventional polymers such as polyanionic cellulose can not meet high temperature limitations2-4. Aggour5-6 and Collette7 etc. have conducted extensive research on synthesis and characterizations of the copolymer or terpolymer containing 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS). Till now, very few research works have been reported on the terpolymer of itaconic acid (IA), acrylamid…     

Ionization Constants of DL-2-Aminobutyric Acid and DL-Norvaline Under Hydrothermal Conditions by UV–Visible Spectroscopy

The first and second ionization constants for the amino acids DL-2-aminobutyric acid (DL-2-aminobutanoic acid) and DL-norvaline (DL-2-aminopentanoic acid) were determined under hydrothermal conditions, from 175 to 275 °C at 10 MPa, using thermally-stable colorimetric pH indicators (acridine, 4-nitrophenol and 2-naphthoic acid). The measurements were carried out by UV–visible spectroscopy using a high-temperature, high-pressure platinum flow cell with sapphire windows, which minimized the effects of thermal decomposition. The results were combined with literature values from titration calorimetry at 25–130 °C to yield an extended van’t Hoff model for the temperature dependence of the ionization constants for the carboxylic acid and ammonium groups, \( K_{\text{a,COOH}} \) and \( K_{{{\text{a,NH}}_{3}^{ + } }} \), over the entire temperature range. The experimental results for the second ionization constant \( K_{{{\text{a,NH}}_{3}^{ + } }} \) at elevated temperatures are consistent with the predictions from the Yezdimer–Sedlbauer–Wood functional group additivity model, but for the first ionization constant \( K_{\text{a,COOH}} \) are not. This suggests that the group contribution parameters for the standard partial molar heat capacity of the carboxylic acid group are in error, or that nearest neighbor interactions between the –COOH and \( - {\text{NH}}_{3}^{ + } \) groups cause a breakdown in the functional group additivity relationship.