Multifunctional nanoparticles as simulants for a gravimetric immunoassay

Immunoassays are important tools for the rapid detection and identification of pathogens, both clinically and in the research laboratory. An immunoassay with the potential for the detection of influenza was developed and tested using hemagglutinin (HA), a commonly studied glycoprotein found on the surface of influenza virions. Gold nanoparticles were synthesized, which present multiple peptide epitopes, including the HA epitope, in order to increase the gravimetric response achieved with the use of a QCM immunosensor for influenza. Specifically, epitopes associated with HA and FLAG peptides were affixed to gold nanoparticles by a six-mer PEG spacer between the epitope and the terminal cysteine. The PEG spacer was shown to enhance the probability for interaction with antibodies by increasing the distance the epitope extends from the gold surface. These nanoparticles were characterized using thermogravimetric analysis, transmission electron microscopy, matrix-assisted laser desorption/ionization-time of flight, and ¹H nuclear magnetic resonance analysis. Anti-FLAG and anti-HA antibodies were adhered to the surface of a QCM, and the response of each antibody upon exposure to HA, FLAG, and dual functionalized nanoparticles was compared with binding of Au–tiopronin nanoparticles and H5 HA proteins from influenza virus (H5N1). Results demonstrate that the immunoassay was capable of differentiating between nanoparticles presenting orthogonal epitopes in real-time with minimal nonspecific binding. The detection of H5 HA protein demonstrates the logical extension of using these nanoparticle mimics as a safe positive control in the detection of influenza, making this a vital step in improving influenza detection methodology.     

Preparation and characterization of biodegradable nanoparticles based on amphiphilic poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) triblock copolymer

Amphiphilic triblock copolymers of poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) (PHB-PEG-PHB) were directly synthesized by the ring-opening copolymerization of β-butyrolactone monomer using PEG as macroinitiator. Their structure, thermal properties and crystallization were investigated by ¹H NMR, differential scanning calorimetry (DSC) and X-ray diffraction. It was found that both PHB and PEG blocks were miscible. With the increase in the PHB block length, the triblock copolymers became amorphous because amorphous PHB block remarkably depressed the crystallization of the PEG block. Biodegradable nanoparticles with core-shell structure were prepared in aqueous solution from the amphiphilic triblock copolymers, and characterized by ¹H NMR, SEM and fluorescence. The hydrophobic PHB segments formed the central solid-like core, and stabilized by the hydrophilic PEG block. The nanoparticle size was close related to the initial concentrations of the nanoparticle dispersions and the compositions of the triblock copolymers. Moreover, the PHB-PEG-PHB nanoparticles also showed good drug loading properties, which suggested that they were very suitable as delivery vehicles for hydrophobic drugs.     

Surface characterization of immunosensor conjugated with gold nanoparticles based on cyclic voltammetry and X-ray photoelectron spectroscopy

This investigation describes the surface characterization of rabbit immunoglobulin G (IgG) conjugated with gold nanoparticles. Goat anti-rabbit immunoglobulin G tagged with 5 nm gold nanoparticles was applied to detect the IgG. Then, the autocatalyzed deposition of Au³⁺ onto the surface of anti-IgGAu increased the surface area per gold nanoparticle. The immobilization chemistries and the atomic concentrations of Au_4f, P_2p, S_2p, C_1s, N_1s and O_1s of the resulting antibody-modified Au electrodes were determined by X-ray photoelectron spectroscopy (XPS). The sulfur that is involved in the cysteamine binding and the enlargement of the gold nanoparticles are identified using cyclic voltammetry. The results reveal that the surface area per gold particle, following the autocatalyzed deposition Au³⁺ on the surface of anti-IgGAu, was approximately seven times higher than that before deposition.     

Silica/Poly(1,5‐dioxepan‐2‐one) Hybrid Nanoparticles by “Direct” Surface‐Initiated Polymerization

Summary: Biodegradable poly(1,5‐dioxepan‐2‐one) (PDXO) was grown directly from Si OH groups of a silica nanoparticle by surface‐initiated, ring‐opening polymerization (SI‐ROP) of 1,5‐dioxepan‐2‐one (DXO). The direct SI‐ROP of DXO was achieved by heating a mixture of Sn(Oct)₂, DXO, and the silica nanoparticles (316 nm in diameter) in anhydrous toluene. The resulting silica/PDXO hybrid nanoparticles were characterized by means of ¹H NMR spectroscopy, IR spectroscopy, thermogravimetric analysis, and field‐emission scanning electron microscopy.

The procedure for the surface‐initiated, ring‐opening polymerization of 1,5‐dioxepan‐2‐one on silica nanoparticles reported here.     

Colloidal stability evolution and completely reversible aggregation of gold nanoparticles functionalized with rationally designed free radical initiators

A series of molecular adsorbates having various chain lengths of terminal poly(ethylene glycol methyl ether) (PEG) moieties, thiol head groups, and intervening free radical initiator moieties was used to functionalize the surface of gold nanoparticles (AuNPs). The bulky PEG groups stabilized the functionalized AuNPs by providing steric hindrance against AuNP aggregation, such aggregation being a major problem in the modification and manipulation of metal nanoparticles. UV–vis spectroscopy was used to evaluate the stability of the adsorbate-functionalized AuNPs as a function of AuNP size (～15, 40, and 90 nm in diameter) and PEG chain length (Mn 350, 750, and 2,000). The longer PEG chains (Mn 750 and 2,000) afforded stability to AuNPs with smaller gold cores (～15 and 40 nm in diameter) for up to several days without any marked aggregation. In contrast, the adsorbate-functionalized AuNPs with the largest gold cores (～90 nm) were noticeably less stable than those with the smaller gold cores. Importantly, the adsorbate-functionalized AuNPs could be isolated in solvent-free “dried” form and readily dispersed in aqueous buffer solution (both acidic and basic) and various organic solvents (protic and aprotic). This isolation–redispersion (i.e., aggregation/deaggregation) process was completely reversible. The chemisorption of the PEG-terminated initiator on the surface of the AuNPs was verified by Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS). As a whole, the strategy reported here affords colloidally stable, free radical initiator-functionalized AuNPs and offers a promising general method for encapsulating metal nanoparticles within polymer shells.

Polyfunctionalised Nanoparticles Bearing Robust Gadolinium Surface Units for High Relaxivity Performance in MRI

The first example of an octadentate gadolinium unit based on DO3A (hydration number q=1) with a dithiocarbamate tether has been designed and attached to the surface of gold nanoparticles (around 4.4 nm in diameter). In addition to the superior robustness of this attachment, the restricted rotation of the Gd complex on the nanoparticle surface leads to a dramatic increase in relaxivity (r₁) from 4.0 mm ⁻¹ s⁻¹ in unbound form to 34.3 mm ⁻¹ s⁻¹ (at 10 MHz, 37 °C) and 22±2 mm ⁻¹ s⁻¹ (at 63.87 MHz, 25 °C) when immobilised on the surface. The one-pot synthetic route provides a straightforward and versatile way of preparing a range of multifunctional gold nanoparticles. The incorporation of additional surface units for biocompatibility (PEG and thioglucose units) and targeting (folic acid) leads to little detrimental effect on the high relaxivity observed for these non-toxic multifunctional materials. In addition to the passive targeting attributed to gold nanoparticles, the inclusion of a unit capable of targeting the folate receptors overexpressed by cancer cells, such as HeLa cells, illustrates the potential of these assemblies.     

Light‐Driven Rotary Molecular Motors on Gold Nanoparticles

We report the synthesis of unidirectional light‐driven rotary molecular motors based on chiral overcrowded alkenes and their immobilisation on the surface of gold nanoparticles through two anchors. Using a combination of ¹H and ¹³C NMR, UV/Vis and CD spectroscopy, we show that these motors preserve their photochemical and thermal behaviour after they have been attached to gold nanoparticles. Furthermore, we describe the synthesis of ²H‐ and ¹³C‐labelled derivatives that were used to verify the unidirectionality of the rotary cycle of these motors both in solution and while grafted to gold nanoparticles. Taken together, these data support the conclusion that these motors maintain their unidirectional rotary cycle when grafted to the surface of small (ca. 2 nm) gold nanoparticles. Thus, continuous irradiation of the system under appropriate conditions leads to unidirectional rotation of the upper half of the molecules relative to the entire nanoparticle.     

金纳米粒子表面自组装巯基十一烷醇单分子层体系的制备及其光散射特性研究

采用柠檬酸钠还原法制备了水相金纳米粒子, 通过巯基的自组装, 成功获得了巯基十一烷醇(MUN)单分子层保护的金纳米粒子. 用紫外可见光谱、透射电子显微镜、激光散射粒度分析、同步散射光谱和发射光谱等手段对组装前后的金纳米粒子的性质进行了研究. 结果表明: 制备的金纳米粒子最大吸收波长518 nm, 形状规则, 粒度均匀, 平均粒径为14.6 nm, 每个粒子含有约9.64×10⁴原子; 组装之后的金纳米粒子表面等离子体共振吸收峰红移17.0 nm, 平均粒径增大为20.2 nm, 组装层的平均厚度2.8 nm, 与MUN分子长度相当, 结合量实验证明每一个金纳米粒子可以结合约7.52×10³个MUN, 表面覆盖率为83.6%, 粒子分散均匀, 稳定性增强可长期保存; 同步散射光谱变化和发射光谱中分频、差频和倍频峰的存在证明, 金纳米粒子组装前后均具有非线性光学特性.     

A New Porphyrin for the Preparation of Functionalized Water-Soluble Gold Nanoparticles with Low Intrinsic Toxicity

A potential new photosensitizer based on a dissymmetric porphyrin derivative bearing a thiol group was synthesized. 5-[4-(11-Mercaptoundecyloxy)-phenyl-10,15,20-triphenylporphyrin (PR-SH) was used to functionalize gold nanoparticles in order to obtain a potential drug delivery system. Water-soluble multifunctional gold nanoparticles GNP-PR/PEG were prepared using the Brust–Schiffrin methodology, by immobilization of both a thiolated polyethylene glycol (PEG) and the porphyrin thiol compound (PR-SH). The nanoparticles were fully characterized by transmission electron microscopy and ¹H nuclear magnetic resonance spectroscopy, UV/Vis absorption spectroscopy, and X-ray photoelectron spectroscopy. Furthermore, the ability of GNP-PR/PEGs to induce singlet oxygen production was analyzed to demonstrate the activity of the photosensitizer. Cytotoxicity experiments showed the nanoparticles are nontoxic. Finally, cellular uptake experiments demonstrated that the functionalized gold nanoparticles are internalized. Therefore, this colloid can be considered to be a novel nanosystem that could potentially be suitable as an intracellular drug delivery system of photosensitizers for photodynamic therapy.     

Reagentless functionalization of gold nanoparticles via a 3 + 2 Huisgen cycloaddition

A mild method for functionalization of gold nanoparticles is reported. The reactions of azide functionalized nanoparticles with propynoic acid derivatives provide triazole functionalized nanoparticles under very mild reaction conditions. Characterization of the nanoparticle-bound triazoles using (1)H and (13)C NMR spectroscopy indicates that both the 1,4 and 1,5 triazole regioisomers are formed on the nanoparticle surface.     

Polyoxometalate-Engineered Building Blocks with Gold Cores for the Self-Assembly of Responsive Water-Soluble Nanostructures

The controlled assembly of gold nanoparticles (AuNPs) with the size of quantum dots into predictable structures is extremely challenging as it requires the quantitatively and topologically precise placement of anisotropic domains on their small, approximately spherical surfaces. We herein address this problem by using polyoxometalate leaving groups to transform 2 nm diameter gold cores into reactive building blocks with hydrophilic and hydrophobic surface domains whose relative sizes can be precisely tuned to give dimers, clusters, and larger micelle-like organizations. Using cryo-TEM imaging and ¹H DOSY NMR spectroscopy, we then provide an unprecedented “solution-state” picture of how the micelle-like structures respond to hydrophobic guests by encapsulating them within 250 nm diameter vesicles whose walls are comprised of amphiphilic AuNP membranes. These findings provide a versatile new option for transforming very small AuNPs into precisely tailored building blocks for the rational design of functional water-soluble assemblies.     

Determination of DNA Hybridization on Gold Nanoparticle Conjugated Polystyrene Particle Thin Film Using Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy

Attenuated total reflectance Fourier transform infrared spectroscopy was used to detect DNA hybridization on a polystyrene conjugated gold nanoparticle thin film. The gold nanoparticles were synthesized on the surface of poly(ethylenimine) coated polystyrene particles by citrate reduction. Single-stranded DNA was then immobilized on the nanoparticle surface via thiol bonding. Ultraviolet-visible spectrometry was used to monitor the conjugation of the nanoparticles on polystyrene particles and the immobilization of a single-stranded DNA probe. The morphology of the polystyrene-gold nanoparticle thin film was characterized using scanning electron microscopy and showed successful conjugation and immobilization. The infrared spectra obtained from the hybridization showed features of DNA structure and peak shifts at 1657 cm^?1 compared to the non-complementary DNA due to changes in hydrogen bonding between N-H and C?O of complimentary bases pairs. The peaks at 1067, 975, 920, and 859 cm^?1, which were shifted to lower wavenumbers in the polystyrene-gold nanoparticle probe and target DNA, indicated hydrogen bonding formation between N-H and N of complimentary base pairs. ATR-FTIR spectroscopy provided simple, fast, and portable label-free detection of target DNA sequence on the polystyrene-gold nanoparticle thin film.     

Noble-metal nanoparticles directly conjugated to globular proteins

We report the synthesis of gold nanoparticles directly conjugated to bovine serum albumin protein by chemical reduction in aqueous solution. Transmission electron microscopy reveals that the gold nanoparticles are well dispersed with an average diameter less than 2 nm, and elemental analysis verifies the composition of the gold-protein conjugates. Infrared spectroscopy confirms that the polypeptide backbone is not cleaved during the conjugation process and that the side chain functional groups remain intact. Raman spectroscopy demonstrates that the disulfide bonds in the conjugated protein are broken and thus are available for interaction with the nanoparticle surface. This synthesis method is a new technique for directly attaching gold nanoparticles to macromolecular proteins.     

Gold nanoparticle/charged silsesquioxane films immobilized onto Al/SiO2 surface applied on the electrooxidation of nitrite

In this work, gold nanoparticles lower than 10?nm were prepared in an aqueous medium using two charged silsesquioxanes, the propylpyridinium chloride and propyl-1-azonia-4-azabicyclo[2.2.2]octane chloride, as stabilizer agents which revealed to be water-soluble. This stabilization method is innovative allowing thin films containing gold nanoparticles to be obtained, and it was used for the first time in the preparation of carbon paste electrodes (CPEs). The charged silsesquioxanes were characterized by liquid ¹³C NMR. The gold nanoparticle/silsesquioxane systems were characterized by ultraviolet–visible spectroscopy (UV–Vis) and transmission electron microscopy. In sequence, they were immobilized on silica matrix coated with aluminum oxide. The resulting solid materials designated as Au-Py/AlSi and Au-Db/AlSi were characterized by infrared spectroscopy and N₂ adsorption/desorption isotherms. The results showed that the gold nanoparticle/silsesquioxane systems are strongly adhered to the surface-forming thin films. The Au-Py/AlSi and Au-Db/AlSi materials were used to prepare CPEs for the electrooxidation of nitrite (NO ₂ ^? ) using cyclic voltammetry and differential pulse voltammetry. The Au-Py/AlSi and Au-Db/AlSi CPEs showed high sensitivity and detection limits of 71.87 and 53.66?μA?mmol^–1?L and 1.3 and 3.0?μmol?L^–1, respectively.     

Detection of DNA immobilized on bare gold electrodes and gold nanoparticle-modified electrodes via electrogenerated chemiluminescence using a ruthenium complex as a tag

Electrogenerated chemiluminescence (ECL) for DNA hybridization detection is demonstrated based on DNA that was self-assembled onto a bare gold electrode and onto a gold nanoparticles modified gold electrode. A ruthenium complex served as an ECL tag. Gold nanoparticles were self-assembled on a gold electrode associated with a 1,6-hexanedithiol monolayer. The surface density of single stranded DNA (ssDNA) on the gold nanoparticle modified gold electrode was 4.8?×?10¹⁴ molecules per square centimeter which was 12-fold higher than that on the bare gold electrode. Hybridization was induced by exposure of the target ssDNA gold electrode to the solution of ECL probe consisting of complementary ssDNA tagged with ruthenium complex. The detection limit of target ssDNA on a gold nanoparticle modified gold electrode (6.7?×?10^?12 mol L^?1) is much lower than that on a bare gold electrode (1.2?×?10^?10 mol L^?1). The method has been applied to the detection of the DNA sequence related to cystic fibrosis. This work demonstrates that employment of gold nanoparticles self-assembled on a gold electrode is a promising strategy for the enhancement of the sensitivity of ECL detection of DNA.     

Polyoxometalate‐Engineered Building Blocks with Gold Cores for the Self‐Assembly of Responsive Water‐Soluble Nanostructures

The controlled assembly of gold nanoparticles (AuNPs) with the size of quantum dots into predictable structures is extremely challenging as it requires the quantitatively and topologically precise placement of anisotropic domains on their small, approximately spherical surfaces. We herein address this problem by using polyoxometalate leaving groups to transform 2 nm diameter gold cores into reactive building blocks with hydrophilic and hydrophobic surface domains whose relative sizes can be precisely tuned to give dimers, clusters, and larger micelle‐like organizations. Using cryo‐TEM imaging and ¹H DOSY NMR spectroscopy, we then provide an unprecedented “solution‐state” picture of how the micelle‐like structures respond to hydrophobic guests by encapsulating them within 250 nm diameter vesicles whose walls are comprised of amphiphilic AuNP membranes. These findings provide a versatile new option for transforming very small AuNPs into precisely tailored building blocks for the rational design of functional water‐soluble assemblies.     

Surface Chemistry of Nanohybrids with Fumed Silica Functionalized by Polydimethylsiloxane/Dimethyl Carbonate Studied Using 1H, 13C,and 29Si Solid-State NMR Spectroscopy

The investigation of molecular interactions between a silica surface and organic/inorganic polymers is crucial for deeper understanding of the dominant mechanisms of surface functionalization. In this work, attachment of various depolymerized polydimethylsiloxanes (PDMS) of different chain lengths, affected by dimethyl carbonate (DMC), to silica nanoparticles pretreated at different temperatures has been studied using ²⁹Si, ¹H, and ¹³C solid-state NMR spectroscopy. The results show that grafting of different modifier blends onto a preheated silica surface depends strongly on the specific surface area (SSA) linked to the silica nanoparticle size distributions affecting all textural characteristics. The pretreatment at 400 °C results in a greater degree of the modification of (i) A-150 (SSA = 150 m²/g) by PDMS-10/DMC and PDMS-1000/DMC blends; (ii) A-200 by PDMS-10/DMC and PDMS-100/DMC blends; and (iii) A-300 by PDMS-100/DMC and PDMS-1000/DMC blends. The spectral features observed using solid-state NMR spectroscopy suggest that the main surface products of the reactions of various depolymerized PDMS with pretreated nanosilica particles are the (CH₃)₃SiO-[(CH₃)₂SiO-]_x fragments. The reactions occur with the siloxane bond breakage by DMC and replacing surface hydroxyls. Changes in the chemical shifts and line widths, as shown by solid-state NMR, provide novel information on the whole structure of functionalized nanosilica particles. This study highlights the major role of solid-state NMR spectroscopy for comprehensive characterization of functionalized solid surfaces.     

Electrochemical and optical characterization of triarylamine functionalized gold nanoparticles

This paper describes the synthesis, structural analysis, and investigations of the optical and electrochemical properties of some gold nanoparticles (AuNPs) which consist of a triarylamine ligand shell attached to small gold cores (Au-Tara). The triarylamine chromophores were attached to small 4-bromobenzenethiol covered gold nanoparticles (ca. 2 nm in diameter) by Sonogashira reaction. This procedure yields triarylamine redox centers attached via π-conjugated bridging units of different length to the gold core. The AuNPs were analyzed with (1)H NMR spectroscopy, diffusion ordered NMR spectroscopy (DOSY), thermogravimetric analysis (TGA), and scanning transmission electron microscopy (STEM). Cyclic voltammetry (CV) technique was used to determine the composition of the redox active particles via the Randles-Sevcik equation. The optical and electrochemical properties of the Au-Tara nanoparticles and of their corresponding unbound ligands (Ref) were investigated with UV/vis/NIR absorption spectroscopy, Osteryoung square wave voltammetry (OSWV), and spectroelectrochemistry (SEC). These data show that the assembling of triarylamines in the vicinity of a gold nanoparticle can change the optical and electrochemical properties of the triarylamine redox chromophores depending on the kind and length of the bridging unit. This is due to gold core-chromophore and chromophore-chromophore interactions.     

Hydrophobically modified polyelectrolytes used as reducing and stabilizing agent for the formation of gold nanoparticles

This paper is focused on the synthesis and characterization of hydrophobically modified polyelectrolytes and their use as reducing as well as stabilizing agents for the formation of gold nanoparticles. Commercially available poly(acrylic acid) has been hydrophobically modified with various degrees of grafting of butylamine introduced randomly along the chain. Different analytical methods are performed, i.e., IR and ¹H-NMR spectroscopy in combination with elemental analysis to determine the degree of grafting. The modified polymers can successfully be used for the controlled single-step synthesis and stabilization of gold nanoparticles. The process of nanoparticle formation is investigated by means of UV-vis spectroscopy. The size and shape of the particles obtained in the presence of unmodified or modified polyelectrolytes are characterized by dynamic light scattering, zeta potential measurements and transmission electron microscopy. The polyelectrolytes were involved in the crystallization process of the nanoparticles, and in the presence of hydrophobic microdomains at the particle surface, a better stabilization at higher temperature can be observed.     

Amphiphilic PPESK-g-PEG graft copolymers for hydrophilic modification of PPESK microporous membranes

Amphiphilic graft copolymers comprising poly(phthalazinone ether sulfone ketone) (PPESK) backbones and poly(ethylene glycol) (PEG) side chains were synthesized and blended into PPESK casting solutions to prepare hydrophilic and anti-fouling microporous membranes. The graft copolymer was prepared by a modified Williamson etherification method. Sodium alkoxide of methoxyl PEG (PEG-ONa) was used to react with chloromethylated PPESK (CMPPESK). FT-IR spectroscopy, ¹H NMR and solid-state ¹³C CP-MAS NMR analysis confirmed the covalent linking of PEG with PPESK backbones. The incorporation ratio of PEG calculated from ¹H NMR was in agreement with that from TGA tests. The graft products were added into PPESK casting solutions to prepare composite porous membranes using phase inversion method. X-ray photoelectron spectroscopy (XPS) and water contact angle examinations indicated that the grafting copolymers were preferentially excluded to the membrane-coagulant interface during membrane forming, contributing the membranes with improved hydrophilicity and surface wettability. Compared with the neat membrane, the blend membranes exhibited a larger surface pore size and less susceptible to protein fouling.