超薄宽带平面聚焦超表面及其在高增益天线中的应用

针对相位梯度超表面在灵活操控电磁波与提高天线增益中的潜在应用,提出一种新型的宽带超表面单元,实现了在较宽频带范围内操控电磁波波前与提高天线增益.本文首先设计了一种圆环十字形对称单元来控制反射波的相移量,单元厚度为1 mm,尺寸为0.3λ_0(λ_0=20 mm),工作频段15—18 GHz,而后验证了由该单元组成的相位梯度超表面在15—18 GHz范围内对电磁波的奇异反射与聚焦特性.最后将设计的反射聚焦超表面应用于提高天线增益中,仿真与测试结果均表明,天线最高增益在15—18 GHz内平均增加了11 d B且-1 dB增益带宽为15—18 GHz(相对带宽为18.2%).由于厚度薄、重量轻、频带宽,设计的该单元拓展了相位梯度超表面在微波领域的应用,有望为高增益天线的实现提供新的方法.     

High gain and circularly polarized substrate integrated waveguide cavity antenna array based on metasurface

Two substrate integrated waveguide (SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively. Firstly, multi-mode resonance theory is employed to broaden the bandwidth of the slot antenna. And then, an SIW cavity composed of 4×4 cornercut elements is added on the top of the slot antenna to achieve the circular polarization and improve the front-to-back ratio. Thirdly, the metasurface elements are sequentially rotated and a high gain antenna with 2-dBi enhancement on average in the operation band is obtained. Based on the two antenna units, two 2×2 antenna arrays are designed. The circularly polarized and high gain antenna arrays are both fabricated to verify the correctness. Furthermore, the novel wideband phase shifter is employed in the circularly polarized antenna to obtain an operating bandwidth of 38% (4.05 GHz-5.95 GHz) and AR bandwidth of 24.9% (4.4 GHz-5.65 GHz). The bandwidth of the high gain antenna can reach 42.7% (3.95 GHz-6.1 GHz) and with the gain enhancement of 2 dBi compared with that of the circularly polarized antenna. The gain remains steady in most of operating band within a variation of 1 dBi. It is remarkable that the rotating of the metasurface element has a great influence on the antenna performance, which provides a new explication for the multi-function antenna design.     

Wideband high-efficient linear polarization rotators

We demonstrate a wideband polarization rotator with characteristics of high efficiency and large-range incidence angle by using a very simple anisotropic reflective metasurface. The calculated results show that reflection coefficient of cross polarization is larger than 71% over an octave frequency bandwidth from ~4.9 GHz to ~10.4 GHz. The proposed metasurface can still work very well even at incidence angle of 60?. The experiment at microwave frequencies is carried out and its results agree well with the simulated ones.     

基于单层反射超表面的宽带圆极化高增益天线设计

基于Pancharatnam-Berry相位原理, 设计了一种宽带圆极化反射聚焦超表面并将其应用到提高天线增益中. 首先提出了一种变形十字超表面单元, 在11-16 GHz频带范围内能够实现高效同极化转换, 并基于该单元构建了宽带反射聚焦超表面. 仿真结果表明, 垂直入射的右旋圆极化平面波宽带聚焦效果明显. 然后利用单向阿基米德螺旋天线对超表面进行照射, 其辐射的球面波经超表面反射后得到了近平面波, 有效地提高了天线的增益. 最终对所设计的天线系统进行加工并测试, 结果表明系统的-1 dB增益带宽达到25% (12.5-16 GHz), 在该频带范围内峰值增益均高于19 dBc且轴比小于3 dB. 此外, 在12-15.5 GHz范围内天线口径效率均超过50%.     

一种基于共享孔径Fabry-Perot谐振腔结构的宽带高增益磁电偶极子微带天线

设计了一种工作于X波段的基于共享孔径Fabry-Perot(F-P)谐振腔结构的宽带高增益磁电偶极子微带天线,并设计了三种不同尺寸的双层频率选择表面(FSS)单元,通过共享孔径布阵组成了超材料覆层.利用三种FSS单元的相位补偿特性,有效拓展了覆层天线的增益带宽.实测和仿真结果均表明,加载超材料覆层后,磁电偶极子天线在7.8—12.3 GHz内S_(11)-10 d B,相对带宽达到44.7%,覆盖整个X波段.天线增益在7.9—12.1 GHz内均有明显的提高,最大提高了7 d B.相较于传统的F-P谐振腔结构覆层天线,设计的基于共享孔径的F-P谐振型超材料覆层天线能够明显拓展天线增益带宽,在新型宽带高增益天线设计方面具有广阔的应用前景.     

Ultra-thin single-layer transparent geometrical phase gradient metasurface and its application to high-gain circularly-polarized lens antenna

A new method to design an ultra-thin high-gain circularly-polarized antenna system with high efficiency is proposed based on the geometrical phase gradient metasurface(GPGM).With an accuracy control of the transmission phase and also the high transmission amplitude,the GPGM is capable of manipulating an electromagnetic wave arbitrarily.A focusing transmission lens working at Ku band is well optimized with the F /D of 0.32.A good focusing effect is demonstrated clearly by theoretical calculation and electromagnetic simulation.For further application,an ultra-thin single-layer transmissive lens antenna based on the proposed focusing metasurface operating at 13 GHz is implemented and launched by an original patch antenna from the perspective of high integration,simple structure,and low cost.Numerical and experimental results coincide well,indicating the advantages of the antenna system,such as a high gain of 17.6 d B,the axis ratio better than 2 d B,a high aperture efficiency of 41%,and also a simple fabrication process based on the convenient print circuit board technology.The good performance of the proposed antenna indicates promising applications in portable communication systems.     

基于极化旋转超表面的圆极化天线设计

本文通过设计出一种反射型极化旋转超表面,在8—12 GHz频域内实现高效的极化旋转,并将其加载于微带缝隙天线下方构成新型的极化旋转超表面天线,利用超表面的90°极化旋转效应,成功实现了天线的圆极化辐射调制.仿真与实验结果表明:圆极化天线的中心工作频率为GHz,阻抗带宽为8.3—10 GHz.当微带缝隙天线与极化旋转超表面的间距H=4.5mm时,天线在8.3—8.8 GHz频带内实现了圆极化辐射;当mm时,天线在8.8—9.3 GHz频带内实现了圆极化辐射;当=8mm时,天线在9.3—10 GHz频带内实现了圆极化辐射.实验结果与仿真结果相符,证明了此种设计方法的有效性,也为微带缝隙天线的圆极化设计提供了一种新的途径.     

Ultra-wideband reflective polarization converter based on anisotropic metasurface

In this paper, we propose an ultra-wideband reflective linear cross-polarization converter based on anisotropic metasurface. Its unit cell is composed of a square-shaped resonator with intersectant diagonal and metallic ground sheet separated by dielectric substrate. Simulated results show that the converter can generate resonances at four frequencies under normal incident electromagnetic(EM) wave, leading to the bandwidth expansion of cross-polarization reflection. For verification,the designed polarization converter is fabricated and measured. The measured and simulated results agree well with each other, showing that the fabricated converter can convert x- or y-polarized incident wave into its cross polarized wave in a frequency range from 7.57 GHz to 20.46 GHz with a relative bandwidth of 91.2%, and the polarization conversion efficiency is greater than 90%. The proposed polarization converter has a simple geometry but an ultra wideband compared with the published designs, and hence possesses potential applications in novel polarization-control devices.     

An ultra-wideband 2-bit coding metasurface using Pancharatnam—Berry phase for radar cross-section reduction

An ultra-wideband 2-bit coding metasurface is designed for radar cross-section (RCS) reduction. The design process is presented in detail, in which a polarization conversion metasurface (PCM) is first proposed. The proposed PCM can realize ultra-wideband circular polarization (CP) maintaining reflection. Moreover, Pancharatnam—Berry (PB) phase will be generated in the co-polarized reflection coefficient by rotating the metallic patches in its unit cells. Thus, based on the PCM, the four coding elements of a 2-bit coding metasurface are constructed using PB phase, and an ultra-wideband PB 2-bit coding metasurface is proposed according to an appropriate coding sequence. The simulated and experimental results show that the coding metasurface has obvious advantages of wideband and polarization-insensitivity. Compared to a metallic plate of the same size, it can achieve more than 10 dB RCS reduction in the frequency band from 9.8 GHz to 42.6 GHz with a relative bandwidth of 125.2% under normal incidence with arbitrary polarizations.     

电-磁振子组合型宽带高功率微波辐射天线仿真与设计北大核心CSCD

为了满足宽带高功率微波辐射系统紧凑化的需求,设计了一个口径面尺寸为20cm×20cm 的电 磁振子组合型天线,采用三维全波电磁场仿真,得到该天线在0.3～1.7GHz 带宽内的驻波比小于3,且在此带宽内天线增益均大于2.仿真分析了该天线结构的尺寸、电流环长度以及天线开口角度对电 磁振子组合型天线阻抗带宽和增益的影响.在此基础上,给天线馈入峰值为226kV 的宽带信号,仿真得到天线的最大辐射因子为150kV,等效峰值功率为358.8 MW,辐射效率约70.6%.仿真结果表明：组合振子天线能够满足宽带高功率微波的辐射要求,同时满足辐射系统紧凑化和高辐射效率的要求.     

Design of multi-band metasurface antenna array with low RCS performance

In this paper, a multi-band metasurface(MS) antenna array with low radar cross section(RCS) performance is proposed and measured. Firstly, a 44 antenna array is composed of four 22 Jerusalem cross structure antenna arrays working at different frequency bands, which is aimed at enhancing the bandwidth effectively. Then, each antenna can be seen as a unit of MS in spite of adding the feeding structure. Based on phase cancellation principle, the MS is arranged into a chessboard configuration in order to realize wideband RCS reduction. Thus, excellent radiation and scattering characteristics are obtained simultaneously. Simulated and measured results indicate that this work provides a novel method to achieve bandwidth expansion as well as wideband RCS reduction of the antenna array.     

一种波束扫描超材料天线的设计

设计了一种结合正方形和八边形环的波束扫描超材料平面反射阵列天线。相比于传统的阵列天线设计,运用了新的相位补偿方法,即通过组合反射阵列单元在介质基板的材料不同时得到的相位曲线实现0~360°的相位补偿,使得阵列单元的相位曲线不需要完全覆盖0~360°,并且采用埃尔米特插值的方式解决相位特性曲线线性度差的问题。该方法的优势是具有广泛适应性,降低了对阵列单元的设计要求。利用这种方法设计了几款单层平面反射阵列天线,仿真结果显示反射波束方向与预期设定值相符合,且副瓣与主瓣都相差至少15 dB。通过调节超材料固态等离子体激励区域的范围即改变阵列单元的谐振结构,实现了空间波束扫描,为平面反射阵列天线的设计提供了一种新思路。     

Ultra-thin two-dimensional transmissive anisotropic metasurfaces for polarization filter and beam steering application

We propose an anisotropic planar transmitting metasurface, which has the ability to manipulate orthogonally-polarized electromagnetic waves in the reflection and refraction modes respectively. The metasurface is composed of four layered rectangular patches spaced by three layered dielectric isolators each with a thickness of 0.15λ0 at 15 GHz. By tailoring the sizes of the patches, the metasurface functions as a band-stop filter for the y-polarzied wave and a band-pass filter for the x-polarized wave operating from 14 GHz to 16 GHz. Moreover the phases of the transmitting x-polarized wave can be modulated at about 15 GHz, which contributes to beam steering according to the general refraction law. Experimental results are in good accordance with the simulated ones, in which the reflection efficiency is almost 100% while the transmission efficiency of the x-polarized wave reaches 80% at 15 GHz. Besides, the transmitted x-polarized wave is effectively manipulated from 14 GHz to 16 GHz.     

基于吸聚一体的低散射传输型透镜设计

通过传输型超表面透镜与电路模拟雷达波吸收器的集成设计,提出了一种兼具透射波前变换与带外雷达散射截面减缩特性的微波复合材料设计方法。透镜采用亚波长分布的周期性单元,由梯度相位补偿对透射波进行调节,进而获得平面波前与球面波前之间的互易变换。并且,使用透镜在波前变换频带以外低频端的反射特征,结合单个有耗层设计,构造了电路模拟吸波器。选用一副缝隙耦合馈电的微带贴片天线单元作为初级馈源天线,观察到复合材料的波前变换特性可在宽频带范围内产生主瓣增益增强效果。与透镜相比,电路模拟吸波器的引入使得复合材料针对TE与TM极化分别可在130.68%与155.11%的频率范围内获得雷达散射截面减缩效果。通过全波模拟和实验测量,验证了辐射增益增强与雷达散射截面减缩效果,表明了复合材料吸聚一体设计的有效性。     

伸缩式全金属反射阵列扫描天线

提出了一种伸缩式全金属反射单元,在此基础上设计了一个可用于高功率微波领域的全金属反射阵列波束扫描天线。通过反射单元的上下独立滑动,阵列中每个阵元所接收电磁波的传输路径可改变,从而实现了相控波束扫描。由电磁仿真可知,设计的反射单元能够在10～13 GHz的频带范围内实现0～360°的线性相位调节,且可在15°～40°偏馈条件下相位调节时保持高功率容量。由该型单元组成的中心工作频率为10 GHz的伸缩式全金属反射阵列扫描天线具备90°锥角范围内的二维波束扫描能力,功率容量可达5 GW/m2。同时,在波束扫描过程中,天线增益变化小于3 dB,副瓣电平低于?13 dB,最大口径效率为54.59%。     

Planar bifunctional Luneburg‐fisheye lens made of an anisotropic metasurface

Luneburg lens and Maxwell‐fisheye lens are well‐known microwave and optical devices with distinct focusing properties. Here, a planar bifunctional Luneburg‐fisheye lens made of an anisotropic metasurface is presented, which features as a Luneburg along the horizontal optical axis, while as a fisheye along the vertical optical axis. A method to control the inhomogeneous indices of refraction along the two optical axes independently is proposed by designing an anisotropic and nonuniform metasurface, which can provide the required distributions of refractive indices approximately for Luneburg and fisheye lenses viewing from the two optical axes. Experiments in the microwave frequency range demonstrate very good performance of the planar bifunctional Luneburg‐fisheye lens. The proposed method opens up an avenue to design other kinds of bifunctional devices using metasurfaces in the microwave, terahertz, and even optical ranges.     

异面带状线馈电的宽带双极化蝶形天线

针对通信与雷达系统对双极化与宽带天线的要求,提出了一种基于带状线馈电的双极化蝶形天线。通过两对互相正交的蝶形阵子实现了天线的双极化,并采用一种新型的微带线转异面带状线的巴伦给两对正交蝶形阵子平衡馈电。异面带状线为平衡传输线,满足了蝶形阵子对于平衡馈电的要求。在馈电点处由同轴线对微带线馈电,经渐变微带线转化为异面带状线,最后由两组异面带状线给两对正交蝶形阵子馈电。测得该天线实现了69.23%的阻抗带宽,在6.8~14GHz频带内电压驻波比(VSWR)小于2。为使天线单向辐射且改善天线增益,将天线放置于反射吸收腔内。测得天线在6.8~18GHz的频宽内VSWR基本小于3,天线增益在8~12GHz频带内大于0.11dB,天线前后瓣比大于15dB。因此,所提出的双极化蝶形天线可用于宽带通信系统中。     

Design and analysis of a folded Fresnel Zone Plate antenna

Based on the Kirchhoff-Huygens diffraction theory, a simple analytical method of a planar folded Fresnel zone-plate (FZP), that is the case when a planar reflector is placed behind the zone plates, has been developed. According to the numerical calculation results, the design procedure of the FZP antenna has been presented, and its focusing characteristics and gain-optimized conditions have been discussed. The variations of the focal field distribution with the antenna parameters such as zone numbers, focal length and antenna diameter and the radiation power patterns of the FZP have been simulated numerically. To take a good balance of both receiving and transmitting antennas, at 60GHz operating frequency, the focal length should be designed as a half of the antenna diameter and the zone number should be from 10 to 15. The results in this work show that the folded FZP has good focal characteristics and off-axis performance, and its antenna gain can be optimized by the suitable antenna parameter design. The possibility of applying the folded FZP as a low cost and high gain antenna without strict manufacturing requirement for millimeter-wave communications has been shown.     

高极化纯度的超表面透镜设计与应用

针对超表面在透镜方面的应用,基于各向异性超表面单元设计了一款高极化纯度的聚焦超表面透镜,并探讨了其在高增益高极化纯度天线方面的应用.设计了一款具有极化滤波特性的各向异性超表面单元,单元对x极化波保持高透性的同时,对y极化波保持近乎为零的透射率.利用该型单元设计了焦距为30 mm、阵列大小为105 mm×105 mm、单元数为21×21的聚焦超表面透镜.根据光路可逆原理,焦点处发出的球面波被超表面透镜有效转化为平面波,从而达到提高天线增益的目标.实验中分别用不同极化形式的球面波照射聚焦超表面来研究超表面对不同极化波的控制特性.结果表明,x极化波照射时,超表面工作于透镜模式,球面波转化为平面波,天线增益大大提高;y极化波照射时,超表面类似于金属板,将入射波全部反射;x/y极化混合波照射时,天线增益大大提高,且极化隔离度高于25 dB,充分说明设计的聚焦超表面在提高x极化波增益的同时可高效滤除y极化波,达到了高增益高极化纯度的目标.