Synthesis and characterization of single crystals of the layered copper hydroxide acetate Cu2(OH)3(CH3COO)·H2O

Single‐crystals of the layered copper hydroxide acetate Cu₂(OH)₃(CH₃COO)·H₂O were synthesized by heating copper acetate solution at 60 °C. The standard synthesis of the title compound based on slow titration of copper acetate solution with NaOH yielded materials with worse morphology and an additional phase present. The obtained products were characterized with powder X‐ray diffraction, high temperature powder X‐ray diffraction, scanning electron microscopy and infrared spectroscopy. The crystal structure was determined from single‐crystal X‐ray diffraction data, collected both at 120 K and at 293 K. The title compound crystallizes in the monoclinic botallackite‐type layered structure, space group P 2₁, with the lattice parameters a = 5.5776(3) Å, b = 6.0733(2) Å, c = 18.5134(8) Å, β = 91.802(4)° and a = 5.5875(4)Å, b = 6.0987(4) Å, c = 18.6801(10)Å, β = 91.934(5)° for 120 K and for 293 K, respectively. Acetate groups and water molecules are interlayered between corrugated sheets of edge‐sharing CuO6 octahedra exhibiting strong distortion resulted from the Jahn‐Teller effect. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of (NH4)2CuBr2Cl2·2H2O crystals

Single crystals of a new compound, (NH₄)₂CuBr₂Cl₂.2H₂O, were grown from saturated aqueous solution at room temperature by slow evaporation method. The grown crystals were characterized through elemental, powder XRD, thermal and DSC analyses and FTIR and far IR spectra. The elemental analysis and the decomposition pattern formulated using the TG‐DTG studies confirm the stoichiometry of the compound. The crystallinity of the compound is confirmed from the powder XRD pattern. A preliminary single crystal X‐ray diffraction structural analysis reveals that the title compound belongs to the orthorhombic system with a = 7.7466 Å, b = 7.783 Å and c = 8.1211 Å. The low temperature DSC shows thermal anomalies at –161.1, –156.5, –152.4, –145.2, –134, –18.5, and 1.4°C during the heating run and at –4.3, –54.8, –66.1, –90.6, –109.7 and –147.2 °C during the cooling run. The thermal hysterses indicate first order phase transitions in the title compound at these temperatures. The FTIR spectra were used to assign the characteristic vibrational frequencies due to NH₄⁺, CuX₄^2– ions and other chemical bonds. The effect of substitution of two bromine atoms on the phase transitions of a closely related crystal, diammonium tetrachloro cuprate dihydrate is also discussed. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis,structural and thermal studies of tetrathioureacopper(I) chloride crystals

Tetrathioureacopper(I) chloride, hereafter abbreviated as TCC, was synthesised and single crystals were obtained from saturated aqueous solution by slow evaporation (solution growth) method at room temperature. The crystals obtained are bright, colourless and transparent having well defined external faces. The grown crystals were characterized through elemental analysis, single crystal X‐ray diffraction study, thermal analysis, electron spin resonance spectroscopy and Fourier Transform infrared spectroscopy. The elemental analysis confirms the stoichiometry of the compound. The single crystal diffraction studies indicate that TCC crystallises in the tetragonal lattice and the unit cell parameters are a = b = 13.4082 Å, c = 13.8074 Å, V = 2482.29 ų, α = β = γ = 90°. Space group and the number of molecules per unit cell (Z) are found to be P4₁2₁2 and 8 respectively. The TG curve of the sample shows a prolonged decomposition from 210 to 628.3 °C, from which the decomposition pattern has been formulated. The endothermic peaks in the DTA curve indicate melting and decomposition of the compound at 165.2 and 633.8 °C respectively. An exothermic peak in high temperature DSC indicates a phase transition in the compound at 274.8 °C. Thermal anomalies observed in the low temperature DSC at –163.3, –152.0, –141.5, –108.3, 1.0 and 12.1 °C in the heating run and –157.1 and –153.9 °C in the cooling run reveal first order phase transitions in the crystal. The peaks observed at –146.2 °C in both the heating and cooling runs suggest occurrence of a second order phase transition in this compound. The IR spectroscopic data were used to assign the characteristic vibrational frequencies of various groups present in the compound. The ESR study confirms that the copper is in the +1 oxidation state in the complex. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal Structure of Diethyl 2‐[2,2,2‐ trifluoro‐1‐(indole‐3‐yl)‐ethyl]‐2‐acetamidomalonate

The title compound (C₁₉H₂₁F₃N₂O₅) has been determined from three dimensional X‐ray diffraction data. The crystals are monoclinic, a = 7.626(4)Å, b = 17.515(4)Å, c = 15.066(3)Å, β = 101.02(3)°, V = 1975(1)ų, Z = 4, D_calc = 1.393g cm^‐3, space group P2₁/c. The structure was solved by direct methods and refined by full‐matrix least‐squares method (R = 0.039).     

Characterization and solventless growth of salicylic acid macro‐crystals involving a nitrogen gas flow

We report an original solventless thermal crystallisation method to grow large needle‐like salicylic acid (SA) crystals of 10‐12 mm in length. The method is based on the utilization of nitrogen gaz flow on salicylic acid powder during heating just below melting point temperature for 24 h. Salicylic acid provides one of the best examples of a pharmaceutical substance used for cosmetics whose physical and chemical properties indicate hydrogen‐bond formation between the hydroxyl group and an adjacent oxygen atom of the same molecule. The structure of the crystals is confirmed by single crystal X‐ray diffraction; it is monoclinic, a = 4.93(2) Å, b = 11.23(5) Å, c = 11.56(6) Å, β = 90.77(4)° with the space group P 2₁/c. The macrocrystals formation using this method is new and represents an interesting finding for a wide range of applications to be developed in the fields of biotechnology and photonics (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and characterization of a new langasite‐type single crystal Sr3NbAl1.5Ga1.5Si2O14

Single crystals of Sr₃NbAl_1.5Ga_1.5Si₂O₁₄ (SNAGS) with langasite structure have been successfully grown by Czochralski method. The X‐ray diffraction (XRD) verified that the as‐grown crystal was isostructural with A₃BC₃D₂O₁₄ structure and the lattice parameters were calculated as follows: a = 8.242 Å, c = 5.041 Å, V = 296.6 ų. The piezoelectric coefficient d₁₁ was 5.7pC/N, which was 2.47 times of α‐quartz (d₁₁=2.31pC/N). The electric resistivity was up to 3.04×10⁶ Ωcm at 700 °C for X‐cut sample. In addition, the transmission spectrum of the SNAGS crystal showed that it had a high transmittance (>80%) in the range of 350‐800 nm and exceeded 90% above 520 nm. These results suggest that the SNAGS crystals have potential applications in high‐temperature piezoelectric sensors and optical techniques. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structural,thermal, mechanical and z‐scan studies on 4‐nitrophenol single crystals

4‐nitrophenol (4‐NP) single crystals have been grown by using slow evaporation and slow cooling techniques. A single crystal with size in the range of 7x3.4x1.8cm³ has been obtained by slow cooling method. The grown crystals have been subjected to various characterization studies. The powder XRD spectrum of 4‐NP reveals the good crystalline nature of the grown crystal. Single crystal XRD studies show that the crystal belongs to monoclinic system with cell parameters of a=6.09 Å, b=8.79 Å, c=11.61 Å, α=γ=90°, β=103.15°. The resultant FTIR spectrum confirms the various functional groups present in 4‐NP. Thermal analysis has been performed on the material to study the thermal stability of 4‐NP. The grown crystals belong to the category of soft materials as confirmed by Vickers Hardness tests. The optical transmiitance of 4‐NP single crystals has been measured from Vis‐IR spectroscopy study. The nonlinear optical properties have been analyzed by z‐scan technique and 4‐NP is found to be self defocusing because of its negative nonlinear refractive index. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and crystallographic characterization of crystalline modifications of 3,4:9,10‐perylenetetracarboxylic dianhydride at room temperature

3,4:9,10‐Perylenetetracarboxylic dianhydride (PTCDA) powder obtained from Sigma‐Aldrich was purified by three cycles of temperature gradient sublimation in an evacuated quartz glass tube providing variable conditions. By means of X‐ray diffraction (XRD) analysis, a crystallographic characterization of the powders obtained during the sublimation process and selected single crystals was carried out evidencing the presence of a major α‐ and a minor β‐PTCDA component in all samples. Lattice parameters of high precision were obtained for α‐PTCDA (a = 3.73283(4) Å, b = 12.0328(6) Å, c = 17.3998(4) Å, β = 98.689(2)°, V = 772.57(4) ų and d₁₀₂ = 3.219(3) Å) by whole‐X‐ray‐powder‐pattern‐fitting of the experimental XRD pattern using the Le Bail approach. Employing a (001) KCl wafer as substrate for the material purification results in formation of single phase α‐PTCDA accompanied by a decrease in the size of the crystallites which is attributed to the presumed lower temperature of the KCl wafers. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth of barium oxalate crystals in agar–agar gel and their characterization

Single crystals of barium oxalate have been grown by gel method using agar‐agar gel as media of growth at ambient temperature. The optimum conditions were established by varying various parameters such as concentration of gel, concentration of reactant, gel setting time etc. Prismatic platy shaped transparent crystals were obtained. The grown crystals were characterized through powder X‐ray diffraction (XRD), Fourier transform infrared (FT‐IR) studies, Thermogravimetric (TGA) and Differential thermal analysis (DTA). The compound crystallizes under monoclinic structure with lattice parameters a = 6.6562 Å, b = 8.0464 Å, c = 2.8090 Å, β= 96.832°, and V = 149.38 ų. The FT‐IR spectrum indicates OH and carbonyl group along with the presence of metal‐oxygen bond. The TGA indicates 17.75% weight loss at 550°C from which the decomposition pattern is formulated. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal structure and molecular stereochemistry of polymeric Cu2(DMP)4(DMSO) as a platform for phosphate diester binding

Treatment of a solution of CuCl₂ in dimethyl phosphate (DMP) in an inert solvent under nitrogen atmosphere resulted in a light blue fluorescence powder. Slow evaporation of H₂O‐DMSO solution of this powder led to the formation of blue‐sky crystals of a new polymeric Cu(II) complex, with a unit cell composed of Cu₂(DMP)₄(DMSO), (1). The crystal and molecular structure of the complex was established crystallographically. Compound (1) crystallizes in the monoclinic space group P2₁/n with a = 12.8920(11)Å, b = 13.1966(11)Å, c = 14.7926(13)Å, α = 90°, β = 98.943(2)°, γ = 90° and Z = 4. A square pyramidal environment for the metal center is established by coordination of oxygen atoms of four bridging DMP ligands in the basal positions and a tri‐centered oxygen atom of DMSO in the apical disposition. The sixth position is also affected by a weak interaction with the sulfur atom of DMSO. The phosphorous atom in the bridging DMP is arranged in a deformed tetrahedron with gg conformation for methyl esters with C_2v symmetry. Accordingly, the angles of methoxy substituents are unexpectedly smaller than the bridging oxygens, and synchronous z‐in and z‐out distortions are suggested for DMP anion. The oxygen atom of SOCuCu’ fragment derived from DMSO, functions as a tri‐centered nuclei lie almost in a trigonal triangle environment. This study helps provide further insights into the binding nature of phosphate esters to the active sites of enzymes, which catalyze phosphoryl transfer reactions. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Transport Properties of (NH4)2 CuCl4.2H2O Low Dimensional Single Crystals

The X‐ray diffraction and Infrared (IR) spectral studies of (NH₄)₂ CuCl₄.2H₂O single crystals reveals that these crystals contains tetragonal crystal structure with the unit cell dimensions of a = 7.58Å, c = 7.95Å, z= 2, β =90° and two water molecules in the unit cell. The temperature dependence of thermally stimulated depolarization current (TSDC) and dc electrical conductivity (σ) studies of this two‐dimensional (NH₄)₂ CuCl₄.2H₂O single crystal have been carried out in 77K–300K temperature region. The TSDC thermograph shows only one sharp peak at 248K with a peak current of 130nA, which is attributed to the Maxwell‐Wagner peak. The activation energy (U), relaxation time (τ) are calculated as 0.78eV and 3.44×10^‐15 s respectively. Dc electrical conductivity studies of these crystals show a first order phase transition at about 248K.     

The Crystal and Molecular Structure of 11,12‐dibromo‐ 7,8—benzo‐1,5‐di(p—tolylsulphonyl)‐1,5‐diazacyclononan

The crystal structure of the title compound, C₂₅H₂₆Br₂N₂O₄S₂ was determined by single crystal X‐ray diffraction technique. The crystals are monoclinic, space group C 2/c, with a=20.7142(2) Å b=11.7910(2) Å, c= 10.6735(3) Å, β=98.549(2)°, V=2577.94(9) ų, Z=4. The structure was solved by direct methods and refined by least‐squares methods to a final R=0.046 for 1866 observed reflections with I>2sigma(I). The title compound, displays disordered geometry around the C1 atom located almost on twofold axis. The nine‐membered heterocylic ring is close to the half‐chair conformation. The dihedral angle between phenyl rings is 34.2(1)°.     

The crystal structure of hexaammonium diacetyl‐octa‐molybdate tetrahydrate

The crystal structure of hexaammonium diacetyl‐octa‐molybdate tetrahydrate, (NH₄)₄₂[Mo₁₃₂O₃₇₂ (CH₃COO)₃₀(H₂O)₇₂] is documented. The crystals are triclinic, space group P‐1, with a=8.1018(16) Å, b=10.334(2) Å, c=12.238(2) Å, α=68.20(3)°, β=74.98(3)°, γ=67.25(3)°, V=869.3(3) ų, Z=1. The structure was solved by direct methods and refined by least squares methods to a Final R1 = 0.0374 and wR2 = 0.1074 for 3805 observed reflections with I > 2σ(I). The structure contains ammonium cations and isolated acetyl octamolybdate(6‐) anions, [Mo₈O₂₈(CH₃CO)₂]^6‐. The crystallographic data of the structure was deposited with the Cambridge Data Center as No. CCDC 249565. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

X-ray crystal structural analysis of 1,2-dihydro-3-methylpyrazole-5-one

The title compound 1,2-dihydro-3-methylpyrazole-5-one was determined by X-ray crystal structural analysis. The crystals are monoclinic, with space group P2(1)/n with a = 7.968(7), b = 6.502(6), c = 9.986(10) Å, α = 90°, β = 109.995(15)°, γ = 90°, V = 486.1(8) ų, Z = 4, F(000) = 208, D_c = 1.340 g cm^–3, μ = 0.100 mm^?1, and the final R = 0.0373 and wR = 0.0961. A total of 4776 reflections were collected, of which 1148 were independent (R_int = 0.0589). In the crystal packing diagram, intermolecular N?H···O hydrogen bonds and π?π stacking interactions stabilize the solid state of the title compound.     

Crystal Structure Analysis of {[μ‐N,N′‐Bis(salicylidene)‐2,2′‐dimethyl‐1,3‐propanediaminato](dimethylformamide) zinc(II)}diiodomercury(II)

The title compound, a hetero‐dinuclear complex with Zn^II and Hg^II ions, forms crystals which belong to the monoclinic system, space group P2₁/n, with unit cell dimensions a = 11.2217(12), b = 17.7493(11), c = 13.9293(13) Å, β = 94.830(3)°, V = 2764.5(4) ų. The cell contains four molecules. The Zn…Hg distance is 3.5362(15) Å.     

Powder study of propanthioamide dervative C8H6N2S2

The crystal structure of 2‐cyano‐3‐(2‐thienyl)prop‐2‐enethioamide (C₈H₆N₂S₂), a propanethioamide derivative was solved from high resolution laboratory X‐ray powder diffraction data collected at ambient conditions. Structure determination was performed by means of the global optimization method of simulated annealing at a resolution of 1.5 Å. Rietveld refinement yielded an R_WP value of 4.02% (P2₁/a, a = 15.8174(2) Å, b = 5.6502(1) Å, c = 11.0952(1) Å, β = 116.9923(7)°, V = 883.6(5) ų, Z = 4). The molecules are stacked in parallel layers and are stabilized by hydrogen bonds. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal structure and optical properties of 4‐nitrophenyl 4‐butoxybenzoate

The title compound, C₁₇H₁₇N₁O₅, has been synthesized and characterized by single crystal X‐ray analysis and UV‐Vis spectra. The crystals are monoclinic, P 2₁/c, a = 17.994 (5) Å, b = 4.0592 (9) Å, c = 21.625 (5) Å, β = 99.634 (5)°, V = 1557.2 (6) ų and Z = 4. The molecule has an almost stretched form with a molecular length of 17.505 Å and an imbricated structure known for liquid crystals. The structure contains no direction‐specific intermolecular interactions like aromatic π‐π stacking and C‐H… π(arene) other than two weak C‐H…O hydrogen bonds. Good optical transmittance in the entire visible region of the UV‐Vis spectrum suggests that it is a potential candidate for optoelectronic applications. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Powder second harmonic generation measurement and thermal decomposition mechanisms of a new organometallic compound [(18C6)Li][Cd(SCN)3]

Single crystals of a novel nonlinear optical organometallic compound CLTC, ([(18C6)Li][Cd(SCN)₃]), were grown from aqueous solutions via evaporation technique and characterized by IR spectroscopy, thermal gravimetric analysis and X‐ray single‐crystal diffraction. By X‐ray single‐crystal structural analysis it is revealed that the compound crystallized in a noncentrosymmetric space group Cmc2₁ of orthorhombic system with cell parameter a = 14.767(3) Å, b = 15.454(3) Å, c = 10.644(2) Å, V = 2429.0(8) ų and Z = 4. The thermal stability and thermal decomposition of CLTC crystal were investigated by means of thermogravimetry and differential thermal analysis. The second harmonic generation (SHG) efficiency was measured using the Kurtz and Perry powder technique. It was shown that the value of the SHG efficiency of CLCT powder was about 2 times higher than that of potassium dihydrogen phosphate (KDP). (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal structure of 2‐(2'‐hydroxyphenyl)‐6‐tributylstannyl‐4‐(3H )‐quinazolinone and 2‐(2'‐hydroxyphenyl)‐6‐iodo‐4‐(3H)‐quinazolinone

The structures of the title compounds C₂₆H₃₇N₂O₂Sn ( I ) and C₁₄H₉IN₂O₂ ( II ) were determined by single‐crystal X‐ray diffraction technique. Compound I crystallizes in the triclinic space group P1 with a = 9.560(3) Å, b = 16.899(6) Å, c = 17.872(5) Å, α = 65.957(7)°, β = 83.603(5)°, γ ( = 75.242(5)°, V = 2549.8(13) ų, Z = 4, and D =1.374 g/cm³. The compound consists of a quinazolinone ring with phenol and tributylstannyl moieties. Compound II crystallizes in the monoclinic space group P2₁/c with a = 7.6454(12) Å, b = 5.9270(9) Å, c = 27.975(4) Å; α = 90°, β = 95.081(3)°, γ = 90°, V = 1262.7(3) ų, Z = 4, and D = 1.915 g/cm³. The compound consists of a quinazolinone ring with phenol and iodine substituents. For both I and II , the short intramolecular O–H…N and two long intermolecular N–H…O hydrogen bonds are highly effective in holding the molecular system in a stable state. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

X‐ray diffraction refinement of the crystal structure of anosovite prepared from leucoxene

The crystal structure of anosovite, (Ti_1.69Al_0.26Fe_0.05)³⁺(Ti_0.97Zr_0.03)⁴⁺O₅, prepared by carbothermal reduction of leucoxene under vacuum at 1450°C has been refined by Rietveld method using powder X‐ray diffraction data. It was found that it represents slightly monoclinically deformed pseudobrookite type structure with lattice parameters a = 9.8111 Å, b = 3.7509 Å, c = 9.9468 Å, β = 90.628°. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)