Salt-effect enhanced hollow-fiber liquid-phase microextraction of glutathione in human saliva followed by miniaturized capillary electrophoresis with amperometric detection

A hollow-fiber liquid-phase microextraction (HF-LPME) method was established for purification and enrichment of glutathione (GSH) in human saliva followed by a miniaturized capillary electrophoresis with amperometric detection system (mini-CE-AD). Based on regulating isoelectric point and increasing salt effect to modify donor phase, HF-LPME could provide high enrichment efficiency for GSH up to 471 times, and the extract was directly injected for mini-CE-AD analysis. The salt-effect enhanced HF-LPME/mini-CE-AD method has been successfully applied to saliva analysis, and acceptable LOD (0.46 ng/mL, S/N = 3) and recoveries (92.7–101.3%) could be obtained in saliva matrix. The sample pretreatment of this developed method was simple and required no derivatization, providing a potential alternative for non-invasive fluid analysis using portable instrument.     

Comparison of hollow fiber liquid phase microextraction and dispersive liquid-liquid microextraction for the determination of organosulfur pesticides in environmental and beverage samples by gas chromatography with flame photometric detection

Two methods based on hollow fiber liquid phase microextraction (HF-LPME) and dispersive liquid-liquid microextraction (DLLME), have been critically compared for the analysis of organosulfur pesticides (OSPs) in environmental and beverage samples by gas chromatography-flame photometric detection (GC-FPD). Experimental conditions including extraction solvent, solvent volume, extraction time, temperature and ionic strength have been investigated for both HF-LPME and DLLME. Under the optimal conditions, the limits of detection for the six target OSPs (malathion, chlorpyrifos, buprofezin, triazophos, carbosulfan and pyridaben) obtained by HF-LPME-GC-FPD and DLLME-GC-FPD were ranged from 1.16 microg/L to 48.48 microg/L and 0.21 microg/L to 3.05 microg/L, respectively. The relative standard deviations (RSDs, n=5) were in the range of 3.4-8.0% and 8.5-13.7%with the enrichment factors (EFs) of 27-530 and 176-946 folds for HF-LPME-GC-FPD and DLLME-GC-FPD, respectively. Both methods were found to be simple, fast, efficient, and inexpensive. Compared with HF-LPME, the advantages of DLLME technique were less extraction time, suitable for batches of samples pretreatment simultaneously, a higher extraction capacity when analyzing simple samples such as water samples. While for the analysis of complicated matrix samples such as soil and beverage samples, HF-LPME was demonstrated to be more robust and more suitable. Both methods were applied to the analysis of six OSPs in different waters, soil and beverage samples, and no target OSPs was found in these samples. For analysis of the spiked samples, the recovery of 81.7-114.4% with RSDs of 0.6-9.6% were obtained for HF-LPME, and the recovery of 78.5-117.2% with RSDs of 0.6-11.9% were obtained for DLLME.     

Analysis of PBDEs in soil,dust, spiked lake water,and human serum samples by hollow fiber-liquid phase microextraction combined with GC-ICP-MS

A novel method for the analysis of four polybrominated diphenyl ethers (PBDEs) in environmental and human serum samples based on hollow fiber-liquid phase microextraction (HF-LPME) followed by gas chromatography-inductively coupled plasma mass spectrometric (GC-ICP-MS) detection has been developed. The organic solvent in the porous hollow fiber was first dipped into the sample for extraction at a given time, and the retracted organic phase was introduced into the GC-ICP-MS for analysis. The addition of methanol has a strong effect on the HF-LPME extraction efficiency. Other significant parameters affecting the extraction efficiency of HF-LPME were also studied. HF-LPME was effective to isolate the analytes from the complex matrix. Under the optimized conditions, the detection limits of the proposed method varied from 15.2 to 40.5 ng/L. In general, the relative standard deviations (RSDs) were less than 10%. Good linearity was obtained with the correlation coefficients all better than 0.999. The proposed method is simple, quick, few microliters of organic solvent required, and is especially suitable for the analysis of the real sample with small amount available. The overall process of HF-LPME with GC-ICP-MS was applied successfully for the determination of polybrominated diphenyl ethers (PBDEs) in environmental and spiked human serum samples, and the results were satisfactory.     

Behavior and characteristics of biogenic amines, ornithine and lysine derivatized with the o-phthalaldehyde-ethanethiol-fluorenylmethyl chloroformate reagent

The stability and characteristics of the ornithine (Orn), lysine (Lys), putrescine (Put), cadaverine (Cad), 1,7-diaminoheptane (Diah), spermidine (Spd) and spermine (Spm) derivatives obtained with the o-phthalaldehyde (OPA)-ethanethiol (ET)-fluorenylmethyl chloroformate (FMOC) reagent has been investigated. The stoichiometry of the introduced, two-step derivatization process has been followed by photodiode array (DAD) and fluorescence (FL) detections, simultaneously, while the composition of derivatives was confirmed by on-line HPLC-electrospray ionization (ESI) MS measurements. Depending on the composition of the OPA reagents, in addition to the secondary amino group-containing Spd and Spm, under common aqueous conditions also Orn and Lys do react with FMOC resulting in derivatives of various compositions. Applying the OPA-ET reagent of increasing methanol (Met) content (38-80%, v/v) the formation of the FMOC group containing Orn and Lys derivatives could be considerably decreased. Optimum elution condition (18 min, including equilibration) was developed for the simultaneous quantitation of Orn, Lys, Put, Cad, Diah, Spd and Spm, in the presence of the rest of protein amino acids. The practical utility of the method was demonstrated by the analysis of mouse tissues. Average reproducibility of quantitations, characterized with the relative standard deviation percentages of fluorescence intensities and UV responses, in order of listing, proved to be 2.1% and 2.1%, respectively.     

Hollow-fiber liquid-phase microextraction for the determination of pesticides and metabolites in soils and water samples using HPLC and fluorescence detection

A new and simple method has been developed for the determination of a group of four benzimidazole pesticides (carbendazim/benomyl, thiabendazole, and fuberidazole), a carbamate (carbaryl), and an organophosphate (triazophos), together with two of their main metabolites (2-aminobenzimidazole, metabolite of carbendazim/benomyl, and 1-naphthol, metabolite of carbaryl) in soils. First, an ultrasound-assisted extraction (UAE) was performed, followed by evaporation and reconstitution in water. Then, extraction and preconcentration of the analytes was accomplished by two-phase hollow-fiber liquid-phase microextraction (HF-LPME) using 1-octanol as extraction solvent. Parameters that affect the extraction efficiency in HF-LPME technique (organic solvent, pH of the sample, extraction time, stirring speed, temperature, and ionic strength) were deeply investigated. Optimum HF-LPME conditions involved the use of a 2.0 cm polypropylene fiber filled with 1-octanol to extract 10 mL of an aqueous soil extract at pH 9.0 containing 20% (v/v) of NaCl for 30 min at 1440 rpm. Separation and quantification was achieved by HPLC with fluorescence detection (FD). The proposed optimum UAE-HF-LPME-HPLC-FD methodology provided good calibration, precision, and accuracy results for two soils of different physicochemical properties. LODs were in the range 0.001-6.94 ng/g (S/N = 3). With the aim of extending the validation, the HF-LPME method was also applied to different types of waters (Milli-Q, mineral and run-off), obtaining LODs in the range 0.0002-0.57 μg/L.     

Comparison of solid phase microextraction and hollow fiber liquid phase microextraction for the determination of pesticides in aqueous samples by gas chromatography triple quadrupole tandem mass spectrometry

This work compares two miniaturised sample preparation methods, solid phase microextraction (SPME) and hollow fiber liquid phase microextraction (HF-LPME), in combination with gas chromatography coupled to tandem mass spectrometry with a triple quadrupole analyzer for the determination of 77 pesticides in drinking water. In the case of SPME, extraction temperature and time were optimized by experimental design, although other parameters, as desorption time, pH, and ionic strength, were also evaluated. The extraction and desorption solvents [octanol/dihexyl ether (75:25, v/v) and cyclohexane, respectively], as well as the extraction and desorption time, ionic strength, and pH, were studied for the HF-LPME procedure. Under the optimal conditions, recoveries (70.2–113.5% for SPME and 70.0–119.5% for HF-LPME), intra-day precision (2.1–19.4% for SPME and 4.3–22.5% for HF-LPME), inter-day precision (5.2–21.5% for SPME and 8.4–27.3% for HF-LPME), and limits of detection, between 0.1 and 28.8 ng/L for SPME and 0.2 and 47.1 ng/L for HF-LPME and overall uncertainty (9.6–25.2% for SPME and 13.3–27.5% for HF-LPME) were established for both extraction procedures. Finally, the proposed methods were successfully applied to the analysis of 41 drinking water samples, and similar results were obtained with both extraction approaches.     

Assay of bradykinin-related peptides in human body fluids using capillary electrophoresis with laser-induced fluorescence detection

A CE with LIF detection was developed for separation and determination of bradykinin (BK)-related peptides, such as BK, kallidin (Kal), and neurokinin A (NKA). BK-related peptides were derivatized with FITC prior to CE-LIF analysis. Sodium borate 10 mmol/L at pH 9.5 was selected as derivatization media in order to get the high efficiency. Three peptides were baseline-separated within 10 min by using 110 mmol/L sodium borate-sodium hydroxide solution at pH 10.0 as the running buffer. Concentration detection limits (S/N = 3) for BK, Kal, and NKA were 0.08, 0.5, and 0.2 nmol/L, respectively. Meanwhile we have also developed a simple, quick, and sensitive large-volume sample stacking (LVSS) technique for CE-LIF detection of BK, Kal, and NKA. By using this stacking technique, the detection limits (S/N = 3) for BK, Kal, and NKA were 0.02, 0.05, and 0.04 nmol/L, respectively. This method has been applied to the assay of human saliva and cerebrospinal fluid with satisfactory results.     

Determination of amino acid neurotransmitters in human cerebrospinal fluid and saliva by capillary electrophoresis with laser-induced fluorescence detection

A CE-LIF detection method has been developed to identify and quantitate six amino acid neurotransmitters including glutamic acid, aspartic acid, gamma-aminobutyric acid, glycine, taurine, and glutamine. N-hydroxysuccinimidyl fluorescein-O-acetate, a fluorescein-based dye, was employed for the derivatization of these neurotransmitters prior to CE-LIF analysis. Different parameters which influenced separation and derivatization were optimized in detail. Under optimum conditions, linearity was achieved within concentration ranges of up to three orders of magnitudes for those analytes with correlation coefficients from 0.9989 to 0.9998. The LODs ranged from 0.06 nM to 0.1 nM, and are thus superior or equivalent to those previously reported in the literature using CE-LIF detection. The proposed method has been successfully applied to the determination of amino acid neurotransmitters in biological samples such as human cerebrospinal fluid and saliva with satisfactory recoveries.     

Application of hollow fiber liquid phase microextraction for the determination of insecticides in water

In the present work, a novel sample pre-treatment technique for the determination of trace concentrations of some insecticide compounds in aqueous samples has been developed and applied to the determination of the selected analytes in environmental water samples. The extraction procedure is based on coupling polypropylene hollow fiber liquid phase microextraction (HF-LPME) with gas chromatography by flame thermionic detection (GC-FTD). For the development of the method, seven organophosphorous insecticides (dichlorvos, mevinphos-cis, ethoprophos, chlorpyrifos methyl, phenthoate, methidathion and carbofenothion) and one carbamate (carbofuran) were considered as target analytes. Several factors that influence the efficiency of HF-LPME were investigated and optimized including agitation, organic solvent, sample volume, exposure time, salt additives and pH. The optimized methodology exhibited good linearity with correlation coefficient = 0.990. The analytical precision for the target analytes ranged from 4.3 to 11.1 for within-day variation and 4.6 to 12.0% for between-day variation. The detection limits for all analytes were found in the range from 0.001 to 0.072 microg/L, well below the limits established by the EC Drinking Water Directive (EEC 80/778). Relative recoveries obtained by the proposed method from drinking and river water samples ranged from 80 to 104% with coefficient of variations ranging from 4.5 to 10.7%. The present methodology is easy, rapid, sensitive and requires small sample volumes to screen environmental water samples for insecticide residues.     

Comparison of dual solvent-stir bars microextraction and U-shaped hollow fiber-liquid phase microextraction for the analysis of Sudan dyes in food samples by high-performance liquid chromatography-ultraviolet/mass spectrometry

Two sample preparation methods, dual solvent-stir bars microextraction (DSSBME) and U-shaped hollow fiber-liquid phase microextraction (U-shaped HF-LPME), are proposed and critically compared for high-performance liquid chromatography (HPLC)-ultraviolet (UV)/mass spectrometry (MS) analysis of Sudan dyes in this paper. In DSSBME, the organic solvent was confined to a pair of hollow fiber membrane fixed on a stir bar, which can stir by itself, while the hollow fiber in U-shaped HF-LPME was fixed by two microsyringes. The significant factors affecting the microextraction of Sudan dyes in both microextraction techniques have been examined and no obvious difference in the effect of extraction solvent, pH and salt concentration on the extraction efficiency of Sudan dyes was observed except extraction time and stirring speed. Both microextraction techniques were similar in terms of analytical performance from aqueous solutions (LODs ranged from 0.09 to 0.95 microgL(-1) by HPLC-UV and 2.5-6.2 microgL(-1) by HPLC-MS; the absolute LODs ranged from 0.9 to 11.25 pg by HPLC-UV and 5-21.2 pg by HPLC-MS), however, DSSBME was more stable (lower stirring speed required), less sample consuming and much shorter time required to reach extraction equilibrium; while U-shaped HF-LPME was easier to operate and no more special device required. The two microextraction techniques combined with HPLC-UV/MS were successfully applied to the analysis of real samples including strawberry sauce, capsicum oil, salted egg, and two kinds of chilli sauce. Although the LODs of HPLC-UV are lower than that of HPLC-MS by a factor of 10 in this work, the absolute LODs for both HPLC-UV and HPLC-MS are comparable. HPLC-UV cannot identify the suspicious peaks at the same retention time as that of Sudan II and III in salted egg, while HPLC-MS can give exact information of Sudan I-IV in real sample analysis and is more reliable. The sensitivity of HPLC-MS is enough for real sample analysis.     

Determination of aromatic amines in environmental water sample by hollow fiber-liquid phase microextraction and microemulsion electrokinetic chromatography

A novel method of microemulsion electrokinetic chromatography (MEEKC) coupled with hollow fiber-liquid phase microextraction (HF-LPME) was developed for determination of six aromatic amines including 4-methylaniline, 3-nitroaniline, 2,4-dimethylaniline, 4-chloroaniline, 3,4-dichloraniline and 4-aminobiphenyl. Baseline separation of six aromatic amines was achieved within 8 min by using the microemulsion buffer containing a 10 mM borate buffer at pH 9.0, 0.8% (v/v) ethyl acetate as oil droplets, 60 mM sodium cholate as surfactant, 5.0% (v/v) 1-butanol as co-surfactant. The influence factors relevant to the HF-LPME process were systemically investigated. The obtained enrichment factors were ranged between 70 and 157 in a 30 min extraction time, and the limits of detection ranged between 0.0021 and 0.0048 μg/mL. This purposed method was successfully applied for the analysis of aromatic amines in water sample and the recoveries were ranged from 87.2% to 99.8%.     

Orthogonal array design for optimization of hollow-fiber-based liquid-phase microextraction combined with high-performance liquid chromatography for study of the pharmacokinetics of magnoflorine in rat plasma

In this work, a new sample-preparation method based on hollow-fiber liquid-phase microextraction (HF-LPME) was developed for analysis of magnoflorine in rat plasma. Analysis was accomplished by reversed-phase high-performance liquid chromatography (HPLC), with ultraviolet detection by use of a photodiode-array detector. An orthogonal array design (OAD) was found to be effective for optimization of major conditions which may affect the efficiency of HF-LPME. Under the optimized conditions (pH of donor and acceptor phases 12 and 2.0, respectively; extraction time 20 min; stirring speed 800 rpm; and addition of 10 % (w/v) salt), the preconcentration factor for magnoflorine was 355. Calibration curves with reasonable linearity (r(2)≥0.9994) were obtained in the range 10-1000 ng mL(-1). Intra-day and inter-day precision (RSD) were <5.5 % and the limit of detection (LOD) for the analyte was 3.0 ng mL(-1) (S/N=3). The validated method was successfully used for pharmacokinetic studies of magnoflorine in rat plasma after intravenous administration.     

Hollow fiber liquid phase microextraction combined with graphite furnace atomic absorption spectrometry for the determination of methylmercury in human hair and sludge samples

Two methods, based on hollow fiber liquid–liquid–liquid (three phase) microextraction (HF-LLLME) and hollow fiber liquid phase (two phase) microextraction (HF-LPME), have been developed and critically compared for the determination of methylmercury content in human hair and sludge by graphite furnace atomic absorption spectrometry (GFAAS). In HF-LPME, methylmercury was extracted into the organic phase (toluene) prior to its determination by GFAAS, while inorganic mercury remained as a free species in the sample solution. In HF-LLLME, methylmercury was first extracted into the organic phase (toluene) and then into the acceptor phase (4% thiourea in 1 mol L^− 1 HCl) prior to its determination by GFAAS, while inorganic mercury remained in the sample solution. The total mercury was determined by inductively coupled plasma-mass spectrometry (ICP-MS), and the levels of inorganic mercury in both HF-LLLME and HF-LPME were obtained by subtracting methylmercury from total mercury. The factors affecting the microextraction of methylmercury, including organic solvent, extraction time, stirring rate and ionic strength, were investigated and the optimal extraction conditions were established for both HF-LLLPME and HF-LPME. With a consumption of 3.0 mL of the sample solution, the enrichment factors were 204 and 55 for HF-LLLPME and HF-LPME, respectively. The limits of detection (LODs) for methylmercury were 0.1 μg L^− 1 and 0.4 μg L^− 1 (as Hg) with precisions (RSDs (%), c = 5 μg L^− 1 (as Hg), n = 5) of 13% and 11% for HF-LLLPME–GFAAS and HF-LPME–GFAAS, respectively. For ICP-MS determination of total mercury, a limit of detection of 39 ng L^− 1 was obtained. Finally, HF-LLLME–GFAAS was applied to the determination of methylmercury content in human hair and sludge, and the recoveries for the spiked samples were in the range of 99–113%. In order to validate the method, HF-LLLME–GFAAS was also applied to the analysis of a certified reference material of NRCC DORM-2 dogfish muscle, and the determined values were in good agreement with the certified values.     

Comparison of conventional hollow fiber based liquid phase microextraction and electromembrane extraction efficiencies for the extraction of ephedrine from biological fluids

In the present study, hollow fiber liquid phase microextraction (HF-LPME) based on pH gradient and electromembrane extraction (EME) coupled with high-performance liquid chromatography (HPLC) was compared for the extraction of ephedrine from biological samples. The influences of fundamental parameters affecting the extraction efficiency of ephedrine were studied and optimized for both methods. Under the optimized conditions, preconcentration factors of 120 and 35 for urine and 51 and 8 for human plasma were obtained using EME and HF-LPME, respectively. The calibration curves showed good linearity for urine and plasma samples by both methods with the coefficient of estimations higher than 0.98. The limits of detection were obtained 5 and 10 ng mL(-1) using EME and 60 and 200 ng mL(-1) by HF-LPME for urine and plasma samples respectively. The relative standard deviations of the analysis were found in the range of 5.2-8.6% (n=3). The results showed that in comparison with HF-LPME based on pH gradient, EME is a much more effective transport process, providing high extraction efficiencies in very short time.     

Simultaneous determination of multi-class antibiotic residues in water using carrier-mediated hollow-fiber liquid-phase microextraction coupled with ultra-high performance liquid chromatography tandem mass spectrometry

A method has been developed for carrier-mediated hollow-fiber liquid-phase microextraction (HF-LPME) and enrichment of multiple classes of antibiotics in water samples. Eleven compounds (erythromycin, spiramycin, tilmicosin, sulfathiazole, sulfamethazine, sulfamerazine, oxytetracycline, tetracycline, ciprofloxacin, danofloxacin and enrofloxacin) from four important classes of antibiotics (of the macrolide, sulfonamide, tetracycline and quinolone type) have been simultaneously preconcentrated with one set of HF-LPME conditions, followed by determination by ultra-HPLC combined with electrospray ionization tandem mass spectrometry (UHPLC-MS/MS). Antibiotics can be determined at ng L^?1 levels using this highly sensitive and selective method. Parameters including immersion time, liquid membrane composition, sample pH, acceptor composition and extraction time were optimized to finally give detection limits in the 10?C250?ng?L^?1 range. Good linearity was achieved, with up to 156 times enrichment over the four classes of antibiotics. This multi-residue method enabled the simultaneous enrichment of all 11 multi-class antibiotics from spiked river water samples, with relative recovery between 79 and 118%.

Comparison of two extraction methods for the determination of selective serotonin reuptake inhibitors in sewage sludge by hollow fiber liquid-phase microextraction

This paper presents two procedures for the determination of four selective serotonin reuptake inhibitors (citalopram, paroxetine, fluoxetine, and sertraline) and one metabolite (norfluoxetine) in sewage sludge utilizing three-phase hollow fiber liquid-phase microextraction (HF-LPME). First, direct HF-LPME was used for extraction, clean-up, and preconcentration. The pharmaceuticals were extracted from slurry samples into an organic phase and then back-extracted into an aqueous phase in the lumen of the hollow fiber. Second, a procedure combining pressurized hot water extraction and HF-LPME for clean-up and preconcentration was developed for the same analytes and matrix. The extracts were subsequently analyzed by liquid chromatography-mass spectrometry. For direct HF-LPME, limits of detection were between 1 and 12 ng g(-1) (dry weight) and the relative standard deviation (RSD) values were 3-12%. For the second method, limits of detection were approximately 6 ng g(-1) for all the compounds and RSD values were 8-12%. The methods were validated by comparison of results for the same samples. Sewage sludge from a Swedish wastewater treatment plant was analyzed by both methods; average concentrations were similar for citalopram, paroxetine, and fluoxetine with values of approximately 530, 40, and 200 ng g(-1) , respectively.     

Liquid–liquid–solid microextraction based on membrane-protected molecularly imprinted polymer fiber for trace analysis of triazines in complex aqueous samples

A novel liquid–liquid–solid microextraction (LLSME) technique based on porous membrane-protected molecularly imprinted polymer (MIP)-coated silica fiber has been developed. In this technique, a MIP-coated silica fiber was protected with a length of porous polypropylene hollow fiber membrane which was filled with water-immiscible organic phase. Subsequently the whole device was immersed into aqueous sample for extraction. The LLSME technique was a three-phase microextraction approach. The target analytes were firstly extracted from the aqueous sample through a few microliters of organic phase residing in the pores and lumen of the membrane, and were then finally extracted onto the MIP fiber. A terbutylazine MIP-coated silica fiber was adopted as an example to demonstrate the feasibility of the novel LLSME method. The extraction parameters such as the organic solvent, extraction and desorption time were investigated. Comparison of the LLSME technique was made with molecularly imprinted polymer based solid-phase microextraction (MIP-SPME) and hollow fiber membrane-based liquid-phase microextraction (HF-LPME), respectively. The LLSME, integrating the advantages of high selectivity of MIP-SPME and enrichment and sample cleanup capability of the HF-LPME into a single device, is a promising sample preparation method for complex samples. Moreover, the new technique overcomes the problem of disturbance from water when the MIP-SPME fiber was exposed directly to aqueous samples. Applications to analysis of triazine herbicides in sludge water, watermelon, milk and urine samples were evaluated to access the real sample application of the LLSME method by coupling with high-performance liquid chromatography (HPLC). Low limits of detection (0.006–0.02 μg L⁻¹), satisfactory recoveries and good repeatability for real sample (RSD 1.2–9.6%, n = 5) were obtained. The method was demonstrated to be a fast, selective and sensitive pretreatment method for trace analysis of triazines in complex aqueous samples.     

A rapid, sensitive and effective quantitative method for simultaneous determination of cationic surfactant mixtures from river and municipal wastewater by direct combination of single-drop microextraction with AP-MALDI mass spectrometry

A rapid, simple, sensitive, and effective quantitative method for simultaneous determination of cationic surfactants (CS(+)) from river and municipal wastewater by direct combination of single-drop microextraction (SDME) with atmospheric pressure (AP)-MALDI mass spectrometry has been successfully demonstrated without the requirements of tedious sample pre- or post-treatment or separation by high-performance liquid chromatography (HPLC), gas chromatography (GC), and capillary electrophoresis (CE). This quantitative method can greatly enhance the signal-to-noise ratio for analysis of small molecules of CS(+) owing to the strong suppression of matrix ions by the analytes. In addition, SDME assisted in the isolation and preconcentration of CS(+) from water samples, which could effectively reduce the background interferences from the matrices present in waste and river water. The SDME conditions were optimized for achieving high extraction efficiency of CS(+) from aqueous samples, in terms of solvent selection, stirring speed, extraction time, exposure volume of acceptor phase, and salt addition. The enrichment factors for CS(+) were found to be 40-64-folds for 7 min of extraction time with no salt addition and at room temperature. This method was found to yield a linear calibration curve in the concentration range from 50 to 1500 microg/l CS(+) with a limit of detection (LOD) of 10 microg/l. The relative recoveries in river and municipal wastewater were found to be 93.8-103.6% and 91.0-98.7%, respectively. These results indicate that the combination of SDME with AP-MALDI/MS is effective for the simultaneous determination of CS(+) from river and municipal wastewater. In addition, a comparison of enrichments and LOD values for this method with hollow-fiber liquid phase microextraction (HF-LPME) was also demonstrated. The present approach is easy to operate, rapid, sensitive, and suitable for high-throughput of analysis.     

Application of new approaches to liquid-phase microextraction for the determination of emerging pollutants

Liquid-liquid extraction (LLE) has been widely used as a pre-treatment technique for separation and preconcentration of organic analytes from aqueous samples. Nevertheless, this technique has several drawbacks, mainly in the use of large volumes of solvents, making LLE an expensive, environmentally-unfriendly technique.Miniaturized methodologies [e.g., liquid-phase microextraction (LPME)] have arisen in the search for alternatives to conventional LLE, using negligible volumes of extracting solvents and reducing the number of steps in the procedure. Developments have led to different approaches to LPME, namely single-drop microextraction (SDME), hollow-fiber LPME (HF-LPME), dispersive liquid-liquid microextraction (DLLME) and solidified floating organic drop microextraction (SFODME).This overview focuses on the application of these microextraction techniques to the analysis of emerging pollutants.     

Drop-to-drop solvent microextraction coupled with gas chromatography/mass spectrometry for rapid determination of trimeprazine in urine and blood of rats: application to pharmacokinetic studies

A simple and rapid method based on drop-to-drop solvent microextraction (DDSME) coupled with gas chromatography/mass spectrometry (GC/MS) has been successfully applied for the pharmacokinetic studies of trimeprazine in 8 microL of urine and blood samples of rats. Several factors that influenced the extraction efficiency of DDSME, such as selection of organic solvent, extraction time, exposure volume of organic phase, addition of salt and pH, were optimized. Linearity was obtained over the concentration ranges of 0.2-10, 0.25-7.0 and 0.5-6.0 microg/mL with correlation coefficients of 0.998, 0.996 and 0.993 in deionized water, urine and blood samples of rats, respectively. The limits of detection (LODs) of trimeprazine were 0.05, 0.06 and 0.1 microg/mL in deionized water, urine and blood samples. The concentrations of trimeprazine obtained in urine and blood samples of rats were 0.21-1.25 and 2.72-0.22 microg/mL, respectively, after a single intravenous administration of this drug. The enrichment factors and LOD values obtained by DDSME coupled to GC/MS were compared with those of hollow fiber liquid-phase microextraction (HF-LPME) combined with GC/MS. We believe that this novel approach can be very useful in clinical application since only one microdrop of biological samples was required to perform the pharmacokinetic studies from rats, so the sample pretreatments for animal experiments can be very easy too.