Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

Polytriacetylenes bearing directly attached functional groups with tunable physical and electronic properties

We report the synthesis and characterization of a unique class of conjugated polymers, polytriacetyelenes (PTAs), from a set of trans‐enediyne (EDY) monomers bearing alkyl and aromatic substituents. Two different methods, i.e., Glaser‐Hay coupling and Pd‐catalyzed oxidative coupling, were employed depending on the nature of the side‐chains. Our methodology is highly versatile in that it allows direct attachment of aromatic substituents to the PTA main‐chains, allowing enhanced tunability in polymer electronic properties, which has not been achievable through previously reported methods. The newly synthesized PTAs displayed strong ability of quenching the fluorescence of poly(3‐hexylthiophene) (P3HT), a prototypical conjugated polymer in organic solar cells, indicating possible applications of these PTAs in optoelectronic devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1391‐1395     

Palladium‐catalyzed modification of poly(p‐bromostyrene) with carbazole and related heteroarenes containing an N?H bond and their properties

Palladium‐catalyzed polymer reactions of poly(p‐bromostyrene) with carbazole and related heteroarenes containing an N H bond (phenothiazine, phenoxazine, and iminostilbene) afforded polystyrene derivatives with heteroaromatic groups in the side chains with high conversions and recoveries. Characterization and chemical oxidation properties of the polymers also were examined. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 28–34, 2000     

New polymers with mesogens in the side chain and kinked aromatic structures in the main chain from the polyaddition of bis(epoxide)s and di(ester)s

Nine polymers with kinked aromatic structures in the main chain and biphenylene‐type mesogenic groups in the side chain were synthesized by the polyaddition of bis(epoxide)s and thio‐ and O‐esters. Tetrabutylphosphonium chloride and tetraphenylphosphonium chloride effectively catalyzed the polymerization. The thermal behavior of the polymers was measured by DSC and polarizing optical microscopy. The effect of annealing time on the degree of crystallization was investigated by DSC analysis. Polymers containing 100% of the kinked aromatic groups and 1,3‐propylene glycol in the main chain were amorphous. However, when half of the main‐chain aromatic moieties were composed of kinked groups and the other half of the aromatics were linear rodlike groups, the polymers were crystalline. The incorporation of kinked groups into the main chain of side‐chain liquid‐crystalline polymers suppressed the formation of liquid crystallinity. The polymer with mesogenic aromatic structures in both the main chain and the side chain was capable of forming a liquid‐crystalline phase. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 988–998, 2000     

Synthesis of methyl‐substituted azobenzene–carbazole conjugated copolymers with photoinduced structural changes

Azobenzene switches its structure instantaneously by reversible trans‐to‐cis and cis‐to‐trans photoisomerization with light irradiations. Dynamic change in polymer structure is expected via introducing an azobenzene unit into the main chain. In this study, a set of methyl‐substituted azobenzene–carbazole conjugated copolymers is synthesized by the Suzuki–Miyaura coupling method. Introduction of methyl substituents to the azobenzene unit of the monomer, and polymerization in a high‐boiling solvent improve the molecular weight of the polymer. Decrease of effective conjugation length due to the twisted structure of the main chain allows progress of photoisomerization. The microstructure of the polymer was determined with grazing incidence X‐ray diffraction (GIXD) measurements using synchrotron radiation. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1756–1764     

Naphthodithiophene‐Diketopyrrolopyrrole‐Based donor–Acceptor alternating π‐Conjugated polymers for Organic thin‐Film transistors

Novel naphtho[1,2‐b:5,6‐b′]dithiophene (NDT) and diketopyrrolopyrrole (DPP)‐containing donor‐acceptor conjugated polymers (PNDTDPPs) with different branched side chains were synthesized via Pd(0)‐catalyzed Stille coupling reaction. Octyldodecyl (OD) and dodecylhexadecyl (DH) groups were tethered to the DPP units as the side chains. The soluble fraction of PNDTDPP‐OD polymer in chloroform has much lower molecular weight than that of PNDTDPP‐DH polymer. PNDTDPP‐DH polymer bearing relatively longer DH side chains exhibited much better charge‐transport behavior than PNDTDPP‐OD polymer with shorter OD side chains. The thermally annealed PNDTDPP‐DH polymer thin films exhibited an outstanding charge carrier mobility of ～1.32 cm² V^?1 s^?1 (I_on/I_off ～ 10⁸) measured under ambient conditions, which is almost six times higher than that of thermally annealed PNDTDPP‐OD polymer thin films. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5280–5290     

Synthesis and characterization of chiral polymer complexes incorporating polybinaphthyls,bipyridine, and Eu(III)

Chiral conjugated polymers P‐1 and P‐2 were synthesized by the polymerization of (S)‐3,3′‐diiodo‐2,2′‐bisbutoxy‐1,1′‐binaphthyl and (S)‐6,6′‐dibromo‐2,2′‐bisbutoxy‐1,1′‐binaphthyl, respectively, with 5,5′‐divinyl‐2,2′‐bipyridine through a Heck cross‐coupling reaction. Chiral polymer complexes P‐C‐1 and P‐C‐2 were obtained by the bipyridine chelating coordination of P‐1 and P‐2 with Eu(TTA)₃·2H₂O (where TTA is 2‐thenoyltrifluoroacetonate). Polymers P‐1 and P‐2 and polymer complexes P‐C‐1 and P‐C‐2 exhibited intense circular dichroism signals, with negative and positive Cotton effects in their circular dichroism spectra. The chiral polymers showed strong green‐blue fluorescence because of the efficient energy migration from the extended π‐electronic structure of the conjugated polymer main to the chiral binaphthyl core. The chiral polymer complexes could have not only polymer fluorescence but also the characteristic fluorescence of Eu(III) (⁵D₀→⁷F₂) at a different excited wavelength. These kinds of chiral polymer complexes incorporating polybinaphthyls, bipyridine, and Eu(III) moieties are expected to provide an understanding of the relationship between the structure and properties of chiral polymer complexes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 650–660, 2007     

Anionic synthesis and detection of fluorescence‐labeled polymers with a terminal anhydride group

To monitor polymer–polymer coupling reactions between two different monofunctional polymers in dilute polymer blends, fluorescence‐labeled anhydride‐functional polystyrene (PS) and poly(methyl methacrylate) (PMMA) were prepared by conventional anionic polymerization. Sequential trapping of lithiopolystyrene by 1‐(2‐anthryl)‐1‐phenylethylene (APE) and then di‐t‐butyl maleate (4) provided, after pyrolysis, anhydride‐functional fluorescent PS. Fluorescent PMMA anhydride (8) was synthesized with sec‐butyllithium/APE as an initiator for the anionic polymerization of methyl methacrylate, trapping by 4, and pyrolysis. These polymers could be reacted with amine‐functional polymers by melt blending, and the reaction progress could be monitored by gel permeation chromatography coupled with fluorescence detection. This technique not only allows monitoring of the coupling reaction with high sensitivity (ca. 100 times more sensitive than refractive index detection) but also permits selective detection because unlabeled polymers are invisible to fluorescence detection. This highly sensitive and selective detection methodology was also used to monitor the coupling reaction of 8 with PS‐NH₂ at a thin‐film interface, which was otherwise difficult to detect by conventional methods. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2177–2185, 2000     

Chiral oxazoline substituted optically active poly(m‐phenylene)s: Synthesis and coupling polymerizations of (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl) oxazoline using transition metal catalysts

Optically active poly(m‐phenylene)s substituted with chiral oxazoline derivatives have been synthesized by the nickel‐catalyzed Yamamoto coupling reaction of optically active (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl)oxazoline derivatives (X = Br or I). The structures and chiroptical properties of the polymers were characterized by spectroscopic methods and thermal gravimetric analyses. The polymers showed higher absolute optical specific rotation values than their corresponding monomer, and showed a Cotton effect at transition region of conjugated main chain. The optical activities of the polymers should be attributed to the higher order structure such as helical conformations. Moreover, the helical conformation could be induced by addition of metal salts into polymer solutions. The polymers showed good thermal stabilities, which was attributable to the oxazoline side chains. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of a novel reactive ladderlike 4,4′‐phenylene ether‐bridged polyvinylsiloxane

A novel soluble, reactive ladderlike 4,4′‐phenylene ether‐bridged polyvinylsiloxane (L) was synthesized successfully for the first time by a stepwise coupling polymerization (SCP) including hydrolysis and polycondensation. The monomer, 4,4′‐bis(vinyldimethoxysilyl)phenylene ether (M), was synthesized by Grignard reaction. The structures of the monomer and the polymer were characterized by infrared spectrometry (IR), nuclear magnetic resonance (¹H NMR, ¹³C NMR, ²⁹Si NMR), mass spectrometry (MS), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), and gel permeation chromatography (GPC). It is proposed from the characterization data that the polymer possesses an ordered ladderlike structure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2702–2710, 2000     

The synthesis and photoactive properties of cyclic amphiphilic polymers with azobenzene in main chain

The cyclic amphiphilic polymers with azobenzene in main chain, cyclic azobenzene tetraethylene glycol polystyrene (cyclic‐Azo‐TEG‐PS) with different molecular weights, were successfully synthesized by combining atom transfer radical polymerization (ATRP) and Cu (I)‐catalyzed azide/alkyne cycloaddition (CuAAC). Gel permeation chromatography (GPC), proton nuclear resonance (¹H NMR), Fourier transform‐infrared (FT‐IR), and matrix‐assisted laser desorption/ionization time of flight (MALDI‐TOF) mass spectrometry were used to prove the complete conversion from linear polymers to cyclic ones. The thermal properties and photoisomerization behaviors of obtained cyclic polymers have been investigated by comparison with the linear analogues. The cyclic polymer displayed a higher glass transition temperature compared with the linear one, measured by differential scanning calorimetry (DSC). It was found that the trans‐to‐cis and cis‐to‐trans isomerization of cyclic polymers was both slower than that of their respective linear counterparts upon irradiation by UV/visible light. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1834–1841     

Substituent effect on azobenzene‐based liquid‐crystalline organophosphorus polymers

An Erratum has been published for this article in Journal of Polymer Science Part A: Polymer Chemistry (2003) 41(23) 3862 A new series of combined‐type, azobenzene‐based organophosphorus liquid‐crystalline polymers were synthesized, and their photoisomerization properties were studied. The prepared polymers contained azobenzene units as both the main‐chain and side‐chain mesogens. Various groups were substituted in the terminal of the side‐chain azobenzene mesogen, and the effects of the substituents were investigated. All the polymers were prepared at the ambient temperature by solution polycondensation with various 4‐substituted phenylazo‐4′‐phenyloxyhexylphosphorodichloridates and 4,4′‐bis(6‐hydroxyhexyloxy) azobenzene. The polymers were characterized with gel permeation chromatography, Fourier transform infrared, and ¹H, ¹³C, and ³¹P NMR spectroscopy. Thermogravimetric analysis revealed that all the polymers had high char yields. The liquid‐crystalline behavior of the polymers was examined with hot‐stage optical polarizing microscopy, and all the polymers showed liquid‐crystalline properties. The formation of a mesophase was confirmed by differential scanning calorimetry (DSC). The DSC data suggested that mesophase stability was better for electron‐withdrawing substituents than for halogens and unsubstituted ones. Ultraviolet irradiation studies indicated that the time taken for the completion of photoisomerization depended on the dipolar moment, size, and donor–acceptor characteristics of the terminal substituents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3188–3196, 2003     

A comparison of the properties of two structurally equivalent but regiochemically different mono‐alkylated polybithiophenes prepared through AABB‐type stille polycondensation

Previous routes to polymers with mono‐alkylated bithiophenes have proceeded through polymerization of monoalkyl‐2,2′‐bithiophene monomers through oxidative or AB‐type cross‐coupling polymerizations. The resulting polymer regiochemistry affects both the location and orientation of the polymer side‐chains. In contrast, AABB‐type cross‐coupling polymerizations can control the location and in some cases the orientation of the side‐chains. To study how this control can impact polymer properties, two poly(monodecyl‐2,2′‐bithiophene) polymers have been synthesized through Stille AABB‐type polycondensations of 2,5‐bis(trimethylstannyl)thiophene with different monomers. The alkyl side‐chains are located on every other thiophene, but polymer 1 consists of both head‐to‐tail and head‐to‐head dyads, whereas polymer 2 is made up of only head‐to‐head dyads. ¹H NMR, ¹³C NMR, and heteronuclear single quantum correlation spectroscopy are used to confirm and contrast the polymer regiochemistries. The physical properties of the two polymers are analyzed using UV–vis spectroscopy, differential scanning calorimetry, and grazing‐incidence X‐ray diffraction. Polymer 2 is found to display significantly more aggregation in solution than 1, and it displays different thermal properties. The film properties of polymers 1 and 2, however, are very similar, with nearly identical UV–vis profiles and d‐spacing values as determined by grazing incidence X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Facilitating polymer conjugation via combination of RAFT polymerization and activated ester chemistry

The synthesis of block copolymers via polymer conjugation of well‐defined building blocks offers excellent control over the structures obtained, but often several coupling strategies need to be explored to find an efficient one depending on the building blocks. To facilitate the synthesis of polymers with adjustable functional end‐groups for polymer conjugation, we report on the combination of activated ester chemistry with RAFT polymerization using a chain transfer agent (CTA) with a pentafluorophenyl ester (PFP‐CTA), which allows for flexible functionalization of either the CTA prior to polymerization or the obtained polymer after polymerization. Different polymethacrylates, namely PMMA, P(t‐BuMA) and PDEGMEMA, were synthesized with an alkyne‐CTA obtained from the aminolysis of the PFP‐CTA with propargylamine, and the successful incorporation of the alkyne moiety could be shown via ¹H and ¹³C NMR spectroscopy and MALDI TOF MS. Further, the reactive α‐end‐groups of polymers synthesized using the unmodified PFP‐CTA could be converted into azide and alkyne end‐groups after polymerization, and the high functionalization efficiencies could be demonstrated via successful coupling of the resulting polymers via CuAAC. Thus, the PFP‐CTA allows for high combinatory flexibility in polymer synthesis facilitating polymer conjugation as useful method for the synthesis of block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Silicon surface modification with trialkoxysilyl‐functionalized star‐shaped polymers

The synthesis of trimethoxysilane end‐capped linear polystyrene (PS) and star‐branched PS and subsequent silicon (Si) surface modification with linear and star polymers are described. Trimethoxysilane terminated PS was synthesized using sec‐butyl lithium initiated anionic polymerization of styrene and subsequent end‐capping of the living anions with p‐chloromethylphenyl trimethoxysilane (CMPTMS). ¹H and ²⁹Si NMR spectroscopy confirmed the successful end‐capping of polystyryllithium with the trimethoxysilane functional group. The effect of a molar excess of end‐capper on the efficiency of functionalization was also investigated, and the required excess increased for higher molar mass oligomers. Acid catalyzed hydrolysis and condensation of the trimethoxysilane end‐groups resulted in star‐branched PS, and NMR spectroscopy and SEC analysis were used to characterize the star polymers. This is the first report of core‐functionalized star‐shaped polymers as surface modifiers and the first comparative study showing differences in surface topography between star and linear polymer modified surfaces. Surface‐sensitive techniques such as ellipsometry, contact angle goniometry, and AFM were used to confirm the attachment of star PS, as well as to compare the characteristics of the star and linear PS modified Si surfaces. The polymer film properties were referenced to polymer dimensions in dilute solution, which revealed that linear PS chains were in the intermediate brush regime and the star‐branched PS produced a surface with covalently attached chains in the mushroom regime. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3655–3666, 2005     

Development of catalyst‐transfer condensation polymerization. Synthesis of π‐conjugated polymers with controlled molecular weight and low polydispersity

We describe the development of chain‐growth condensation polymerization for the synthesis of well‐defined π‐conjugated polymers via a new polymerization mechanism, catalyst‐transfer polymerization. We first studied the condensation polymerization of Grignard‐type hexylthiophene monomer with a Ni catalyst as a part of our research on chain‐growth condensation polymerization, and found that this polymerization also proceeded in a chain‐growth polymerization manner. However, the polymerization mechanism involving the Ni catalyst was different from that of previous chain‐growth condensation polymerizations based on substituent effects; the Ni catalyst catalyzed the coupling reaction of the monomer with the polymer, followed by the transfer of Ni(0) to the terminal C? Br bond of the elongated molecule. This catalyst‐transfer condensation polymerization is generally applicable for the synthesis of polythiophene with an etheric side chain and poly(p‐pheneylene), as well as for the synthesis of polyfluorene via the Pd‐catalyzed Suzuki–Miyaura coupling reaction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 753–765, 2008     

Synthesis and characterization of aromatic cyclolinear phosphazene polyetherketones containing bis‐Spiro‐substituted cyclotriphosphazene unit

A novel monomer, 2,2‐bis‐(4′‐fluorobenzoylphenoxy)‐4,4,6,6‐bis[spiro‐(2′,2″‐dioxy‐1′, 1′‐biphenylyl)] cyclotriphosphazene, was synthesized and polymerized with 4,4′‐difluorobenzophenone as a comonomer and 4,4′‐isopropylidenediphenol or 4,4′‐(hexafluoroisopropylidene) diphenol in N,N‐dimethylacetamide at 162 °C for 4 h to give two series of aromatic cyclolinear phosphazene polyetherketones containing bis‐spiro‐substituted cyclotriphosphazene groups. The structure of the monomer was confirmed by ¹H, ¹³C, and ³¹P NMR. The effect of the incorporation of the bis‐spiro‐substituted cyclotriphosphazene group on the thermal properties of these polymers was investigated by DSC and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2993–2997, 2001     

Microwave‐assisted polycondensation of 4‐octylaniline with dibromoarylene

The Pd‐catalyzed polycondensation of 4‐octylaniline with various dibromoarylenes was carried out under microwave heating. Microwave heating led to a decrease in the reaction time and an increase in the molecular weight of the polymers as compared to conventional heating. Microwave heating also allowed the catalyst loading to be reduced to 1 mol %, yielding polymerization results that were comparable to those under conventional heating and 5 mol % catalyst. Investigations regarding field‐effect transistors and organic photovoltaic cells using the obtained poly(arylamine) with azobenzene units revealed that increasing the molecular weight of the polymer led to improved device performance, including hole mobility and power conversion efficiency. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 536–542     

Photovoltaic polymers based on difluoroqinoxaline units with deep HOMO levels

We report the synthesis of low bandgap polymers with a difluoroquinoxaline unit by Stille polymerization for use in polymer solar cells (PSCs). A new series of copolymers with 2,3‐didodecyl‐6,7‐difluoro quinoxaline as the electron‐deficient unit and alkyloxybenzo[1,2‐b:4,5‐b′]dithiophene and thiophene as the electron‐rich unit were synthesized. The photovoltaic properties of the devices based on the synthesized polymers revealed that the fluorine atoms at the quinoxaline units aid in decreasing the highest occupied molecular orbital (HOMO) energy levels; this in turn increased the open circuit voltage of the devices. The polymers with long alkyl chains exhibited good solubility that increased their molecular weight, but the power conversion efficiency was low. Efficient polymer solar cells were fabricated by blending the synthesized copolymers with PC₇₁BM, and the PCE increased up to 5.11% under 100 mW cm⁻² AM 1.5 illumination. These results demonstrate that the importance of having a control polymer to be synthesized and characterized side by side with the fluorine analogues. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1489–1497     

Low‐temperature route to thermoplastic polyamide elastomers

Thermoplastic polyamide elastomers were obtained by polymerization of aminobenzoyl‐substituted telechelics derived from poly(tetrahydrofuran)‐diols (number‐average molecular weight: 1400 or 2000 g mol^?1) with several diacid dichlorides (terephthaloyl dichloride, 4,4′‐biphenyldicarbonyl dichloride, or 2,6‐naphthalenedicarbonyl dichloride) and chlorotrimethylsilane in N,N‐dimethylacetamide at 0–20 °C. The as‐prepared polymers had melting temperatures above 190 °C and exhibited elastic properties at room temperature, as evidenced by dynamic mechanical analysis and stress–strain measurements. The polymer with 2,6‐naphthalenedicarboxamide hard segments had the widest rubbery plateau within the series, the highest extension at break, and good recovery properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1449–1460, 2004