含咔唑生色基团的甲基丙烯酸酯类单体及其聚合物的荧光行为

对于含有给电子荧光生色团的丙烯酸类单体或含有受电子荧光生色团的乙烯氧基类单体的荧光行为的研究发现,这类单体都表现出一个共同的特点,即在相同生色团浓度下单体的荧光强度皆明显低于其相应的聚合物．我们将这种现象称为荧光“结构自猝灭效应”（ＳＳＱＥ）．这种现...     

New carbazole-containing monomers and polymers

Five novel vinyl monomers, all of which contain 3-substituted carbazolyl groups [i.e., N-(9-ethyl-3-carbazolyl)-maleimide, 9-ethyl-3-carbazolyl acrylamide, 9-ethyl-3-carbazolyl methacrylamide, 9-ethyl-3-hydroxymethylcarbazolyl acrylate, and 9-ethyl-3-hydroxymethylcarbazolyl methacrylate], and their corresponding polymers were synthesized. Two methods were used for the synthesis of the last two monomers.     

Synthesis and characterization of alkylated N‐vinylformamide monomers and their polymers

N‐alkyl‐N‐vinylformamide monomers (alkyl: n‐butyl, hexyl, decyl, and dodecyl) are synthesized in two steps: first, preparation of N‐vinylformamide potassium salt by the reaction of N‐vinylformamide (NVF) with potassium t‐butoxide, then reaction with alkyl bromide. All four monomers are liquid and are characterized by IR, ¹H NMR, ¹³C NMR, and mass spectra. They exist as rotomers in solution and a 2D NOE experiment on the N‐hexyl containing polymer shows the E isomer to be favored. The polymerizability of the four monomers is from good to fair, depending upon the length of alkyl chain on the N‐atom‐‐the longer the chain length, the lower lower the polymerizability of monomer. The hydrolysis of poly(N‐hexyl‐N‐vinylformamide) and poly(N‐dodecyl‐N‐vinylformamide) under acidic and basic conditions was examined. Studies show that hydrolytic cleavage of formyl groups of poly (N‐alkylated‐N‐vinylformamide) depends on the hydrophobicity of the alkyl substituent on the N‐atom under acidic conditions; both polymers were hydrolyzed to only a minor extent under alkaline conditions. The N‐alkylated monomers can copolymerize with NVF and demonstrate amphiphilic properties. The copolymers demonstrate a critical aggregation concentration above which they can solubilize a water insoluble dye; the N‐hexyl containing copolymer stabilizes a castor oil‐in‐water emulsion. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4994–5004, 2004     

Vinyl monomers bearing chromophore moieties and their polymers. I. Initiation and photochemical behavior of N-acryloyl-N′-phenylpiperazines and their polymers

Two novel acrylic monomers bearing aromatic tertiary amino groups, i.e., N-acryloyl-N′-phenylpiperazine (APP) and N-methacryloyl-N′-phenylpiperazine (MPP) are synthesized by the reaction of N-phenylpiperazine and the corresponding acryloyl chlorides in the presence of triethylamine. They can be polymerized easily by using AIBN as an initiator or photopolymerized without any sensitizer. The photochemical behavior of APP, MPP, and their polymers are explored by recording the fluorescence spectra in solution. It has been found that the fluorescence intensities of these monomers are dramatically lower than those of their polymers in the same chromophore concentration, and such phenomenon is termed as “structural self-quenching effect” (SSQE). The strong fluorescence of these polymers can be quenched by adding electron-deficient monomers which have no chromophore moieties such as MMA, AN, etc., and their Stern–Volmer constants are determined. It is observed that the higher the electron-deficiencies of the quenchers, the higher the Stern–Volmer constants, which means stronger quenching effect. The SSQE displayed by APP and MPP make them useful as probes to pursue their photopolymerization process. As polymerizable aromatic tertiary amines, APP and MPP themselves or combining with organic peroxides such as BPO can initiate the photopolymerization or thermal polymerization of vinyl monomers such as MMA, AN by free radical nature, and at the same time enter the polymer chain. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1881–1888, 1996     

Vinyl monomers bearing chromophore moieties and their polymers. III. Synthesis and photochemical behavior of acrylic monomers having phenothiazine moieties and their polymers

Four acrylic monomers bearing phenothiazine moieties, i.e., N-acrylyl-phenothiazine (APT), N-acrylyl-2-chlorophenothiazine (ACPT), N-acrylyl-2-acetylphenothiazine (AAPT), and 10-acrylyl-1-azaphenothiazine (AAzPT) were synthesized by dehydrohalogenation of the corresponding N-(β-chloropropionyl)-substituted phenothiazine derivatives with 1,8-diazabicyclo[5.4.0]undec-5-ene (DBU). These monomers could easily be polymerized by initiation with AIBN. The emission fluorescence spectra of the monomers and their polymers were recorded, which showed that the polymers displayed much stronger fluorescence than their corresponding monomers at the same chromophore concentrations. This phenomenon, as termed as “structural self-quenching effect,” was commonly observed for acrylic monomers bearing chromophore moieties and ascribed to the coexistence of the electron-donating chromophore and the electron-accepting double bond in the same molecule. Because of the formation of exciplex, the monomer APT, as well as ACPT, AAPT, AAzPT, and their polymers, could initiate the photopolymerization of AN. The charge transfer phenomenon between P(APT), P(ACPT), and C₆₀ was also explored. © 1996 John Wiley & Sons, Inc.     

Synthesis of n‐alkyl methacrylate polymers with pendant carbazole moieties and their derivatives

New methacrylate monomers with carbazole moieties as pendant groups were synthesized by multistep syntheses starting from carbazoles with biphenyl substituents in the aromatic ring. The corresponding polymers were prepared using a free‐radical polymerization. The novel polymers contain N‐alkylated carbazoles mono‐ or bi‐substituted with biphenyl groups in the aromatic ring. N‐alkyl chains in polymers vary by length and structure. All new polymers were synthesized to evaluate the structural changes in terms of their effect on the energy profile, thermal, dielectric, and photophysical properties when compared to the parent polymer poly(2‐(9H‐carbazol‐9‐yl)ethyl methacrylate). According to the obtained results, these compounds may be well suited for memory resistor devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 70–76     

Synthesis and characterization of two new cyclobutyl and aryl hydroxyethyl methacrylate monomers and their polymers

Two new hydroxyethyl methacrylates having aryl and cyclobutane rings were synthesized by addition to 1-(epoxyethyl)-3-aryl-3-methylcyclobutane to methacrylic acid. The monomers prepared are 2-(3-methyl-3-phenylcyclobutyl)-2-hydroxyethyl methacrylate (PCHEMA) and 2-(3-methyl-3-mesitylcyclobutyl)-2-hydroxyethyl methacrylate (MCHEMA). Both monomers were polymerized at 60°C in 1,4-dioxane solution using benzoyl peroxide as initiator. Poly(PCHEMA) and poly(MCHEMA) and their monomers were characterized by FT-IR and ¹H- and ¹³C-NMR techniques. Weight average molecular weights of the polymers were determined for poly(PCHEMA) poly(MCHEMA) by gel permation chromatography. Thermal stabilities of the polymers were essentially the same. Glass transition temperatures for poly(PCHEMA) and poly(MCHEMA) were determined as 105 and 137°C, respectively. No changes of the polymers by irradiation with UV light at 254 nm were observed. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2123–2128, 1997     

Reversible addition‐fragmentation chain transfer polymerization of methacrylates containing hole‐ or electron‐transporting groups

The controlled/living radical polymerization of 2‐(N‐carbazolyl)ethyl methacrylate (CzEMA) and 4‐(5‐(4‐tert‐butylphenyl‐1,3,4‐oxadiazol‐2‐yl)phenyl) methacrylate (t‐Bu‐OxaMA) via reversible addition‐fragmentation chain transfer polymerization has been studied. Functional polymers with hole‐ or electron‐transfer ability were synthesized with cumyl dithiobenzoate as a chain transfer agent (CTA) and AIBN as an initiator in a benzene solution. Good control of the polymerization was confirmed by the linear increase in the molecular weight (MW) with the conversion. The dependence of MW and polydispersity index (PDI) of the resulting polymers on the molar ratio of monomer to CTA, monomer concentration, and molar ratio of CTA to initiator has also been investigated. The MW and PDI of the resulting polymers were well controlled as being revealed by GPC measurements. The resulting polymers were further characterized by NMR, UV‐vis spectroscopy, and cyclic voltammetry. The polymers functionalized with carbazole group or 1,3,4‐oxadiazole group exhibited good thermal stability, with an onset decomposition temperature of about 305 and 323 °C, respectively, as determined by thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 242–252, 2007     

Synthesis and polarized light‐induced birefringence of new polymethacrylates containing carbazolyl and azobenzene pendant groups

Low T_g copolymers of [11(N‐carbazolyl)undecylmethacrylate] and [2,5‐dimethylphenyl‐[(4‐nitrophenyl)azo]‐phenoxyalkylmethacrylate] have been synthesized and the polarized light‐induced birefringence of thick films (70 μm) has been investigated at a constant deducted temperature relative to T_g (T − T_g = 10 °C). The optical properties of these copolymers have been studied in relation to the azo‐dye content and the length of the alkyl spacer between the azo‐dye and the methacrylic backbone. They have been compared with the dispersion of (4‐methoxy‐2,5‐dimethylphenyl)‐(4‐nitrophenyl)diazene (DMNPAA) within a poly[11(N‐carbazolyl)undecyl‐methacrylate] and a poly[N‐vinylcarbazole] (PVK) matrix. The experimental curves have been fitted by biexponentials, so emphasizing the effects of the copolymer structure on the kinetics of the writing process. The photoinduced orientation is more than three orders of magnitude higher in a grafted material compared to the dispersion version. The azo‐dye concentration also has an important role in both the amplitude and the dynamics of the photo‐orientation. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 205–213, 2000     

Long-lived polymer radicals. IV. Reactions of poly(N-methylacrylamide) and poly(N-methylmethacrylamide) radicals with binary mixtures of vinyl monomers

N-methylacrylamide (NMAAm) and N-methylmethacrylamide (NMMAm) were polymerized to give polymer microspheres containing living propagating radicals. The microsphere polymer radicals were allowed to react with some binary mixtures of vinyl monomers including alternating copolymerization combinations. The reaction processes were investigated by ESR spectroscopy. In the poly(NMMAm) radical/methyl methacrylate (MMA)/styrene (St) system, the propagating radical from MMA was mainly observed at the higher MMA concentration, while polySt radical prevailed at the lower MMA concentration. In the poly(NMMAm) radical/α-methylstyrene (α-MeSt)/diethyl fumarate system, the α-MeSt radical was exclusively observed, while the maleic anhydride (MAn) radical was predominantly observed in the α-MeSt/MAn system. In the MAn/diphenylethylene system, the propagating radicals from both monomers were observed at comparable concentrations. The poly(NMAAm) microsphere radical behaved differently in the reaction with the MMA/St mixture. The poly(NMAAm) microsphere was found to incorporate preferentially St, leading to formation of the St radical. The St preference was enhanced in the St/cyclohexyl methacrylate (CHMA) system. These results were in agreement with those of block copolymerization via the reaction of poly(NMAAm) radical with the MMA/St or CHMA/St mixture, where the compositions of the resulting polymers were analyzed by pyrolysis gas chromatography.     

Polymerization of surface-active monomers. VIII. Tacticity of polymers prepared by radical polymerization of quaternary salts of dimethylaminoethyl methacrylate in micellar and isotropic media

The effect of monomer micellization on the polymerization was studied from the standpoint of stereochemistry in the polymerization. Quaternary salts (C_nBr) of dimethylaminoethyl methacrylate with n-alkyl bromide having N (=4, 8 and 12) carbon atoms were polymerized with radical initiators in isotropic and anisotropic media and the resulting polymers were converted to poly (methyl methacrylate) (PMMA) to determine their tacticity. Tacticities of poly (C₁₂Br)s were little affected by initiators and solvents used for their preparations. There was little dependence of the tacticities on alkyl chain length (N) for poly (C_nBr)s prepared in water and dimethylformamide (DMF). Most of polymers produced here conformed to Bernoullian propagation statistics and a definite difference was not found in the tacticities between the polymers prepared in isotropic and anisotropic media. From the results obtained here it was deduced that the micellar aggregation has little influence upon the stereochemistry in the polymerization of the quaternary monomers. © 1994 John Wiley & Sons, Inc.     

Polymerizations of some diene monomers. Preparations and polymerizations of vinyl methacrylate,allyl methacrylate,N-allylacrylamide,and N-allylmethacrylamide

Vinyl methacrylate, allyl methacrylate, N-allylacrylamide, and N-allylmethacrylamide were prepared, and these monomers were polymerized in toluene by α,α-azobisisobutyronitrile catalyst. Cyclization content of poly(vinyl methacrylate) was estimated by infrared spectroscopy to be 50–60% at low conversions, but at the high conversions, due to gelation the polymers were insoluble in the usual organic solvents. Allyl methacrylate did not produce any soluble polymer, even at a low conversion, in contrast with poly-(vinyl methacrylate). Poly-N-allylacrylamide and poly-N-allylmethacrylamide were also insoluble in common solvents. It was assumed that the polymers from monomers containing the allyl group might form crosslinks as a result of allyl resonance stabilization.     

Polymerization of surface-active monomers. II. Polymerization of quarternary alkyl salts of dimethylaminoethyl methacrylate with a different alkyl chain length

The cationic monomers (C_NBr), obtained by quarternization of dimethylaminoethyl methacrylate with n-alkyl bromide containing varying carbon number (N = 4, 8, 12, 14, and 16) were polymerized with radical initiators in water and various organic solvents. The degree of polymerization of the resulting polymers was determined by GPC measurements on poly(methyl methacrylate) samples derived from them. The rate of polymerization of the micelle-forming monomers (N = 8, 12, 14, and 16) in water increases with increasing a chain length of alkyl group, whereas it is little dependent on N in isotropic solution in dimethylformamide. The data on the degree of polymerization for the polymers of C₄Br, C₈Br, and C₁₂Br show that the polymerization of C₁₂Br with azo initiators in water and benzene gives polymers with a very high degree of polymerization. The results obtained here suggest that highly developed or relatively rigid, aggregated structures of monomers in solution are responsible for the formation of the polymers with a very high degree of polymerization, in addition to an enhanced rate of polymerization. Also considered are the relation of the molecular weight of poly(C₁₂Br) to the viscosity data in chloroform and methanol.     

Anionic graft copolymerization of diene polymers with vinyl monomers

A mixture of homopolymer and graft copolymer was obtained by adding the monomer at 0°C to the polylithiodiene solution. Styrene, methyl methacrylate, and acrylonitrile were used as the monomers. Polylithiodienes were prepared by the metalation of diene polymers, i.e., polybutadiene or polyisoprene, with the use of n-butyllithium in the presence of a tertiary amine (N,N,N′,N′-tetramethylethylenediamine) in n-heptane. The graft copolymers were separated by solvent extraction and were confirmed by turbidimetric titration and elementary analysis. Oxidation of the polybutadiene–styrene grafts revealed that the molecular weight of the side chains was the same as the molecular weight of the free polystyrene formed. The grafting efficiency and grafting percentage were studied for polybutadiene–styrene graft copolymers prepared under various conditions.     

Thermoresponsive hyperbranched polymers via In Situ RAFT copolymerization of peg‐based monomethacrylate and dimethacrylate monomers

Here we report the preparation of PEG‐based thermoresponsive hyperbranched polymers via a facile in situ reversible addition‐fragmentation chain transfer (RAFT) copolymerization using bis(thiobenzoyl) disulphide to form 2‐cyanoprop‐2‐yl dithiobenzoate in situ. This novel one‐pot in situ RAFT approach was studied firstly using methyl methacrylate (MMA) monomer, then was used to prepare thermoresponsive hyperbranched polymers by copolymerization of poly(ethylene glycol) methyl ether methacrylate (PEGMEMA, M_n = 475), poly(propylene glycol) methacrylate (PPGMA, M_n = 375) and up to 30 % of ethylene glycol dimethacrylate (EGDMA) as the branching agent. The resultant PEGMEMA‐PPGMA‐EGDMA copolymers from in situ RAFT were characterized by Gel Permeation Chromatography (GPC) and ¹H‐NMR analysis. The results confirmed the copolymers with multiple methacrylate groups and hyperbranched structure as well as RAFT functional residues. These water‐soluble copolymers with tailored compositions demonstrated tuneable lower critical solution temperature (LCST) from 22 °C to 32 °C. The phase transition temperature can be further altered by post functionalization via aminolysis of RAFT agent residues in polymer chains. Moreover, it was demonstrated by rheological studies and particle size measurements that these copolymers can form either micro‐ or macro photocrosslinked gels at suitable concentrations due to the presence of multiple methacrylate groups. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3751–3761     

Linear polymers of vinyl aryl monomers containing another unsaturated group

The synthesis and the anionic polymerization of representative substituted styrenes, CH₂?CH? C₆H₄R′, where R′ is an ethylenic or acetylenic group attached directly or indirectly to the benzene ring, to linear polymers is described. In contrast, crosslinked polymers were obtained when radical and cationic initiators were used. The unpolymerized, unsaturated bonds in R′ in the resulting linear polymers were shown to be present by infrared spectroscopic methods and by the following post-reactions of these bonds: (1) the thermal- and radical-initiated crosslinking of the linear polymers through the unsaturated bonds in R′; (2) the post-bromination of these unsaturated bonds; (3) the post-copolymerization of these unsaturated bonds with vinyl monomers; and (4) the reaction of decaborane with the acetylenic bonds. The anionic copolymerizations of methyl methacrylate, acrylonitrile, and styrene with these monomers were performed and confirmed their behavior as substituted styrenes. Block copolymerizations with styrene and methyl methacrylate were also performed and the expected results obtained. Post-bromination of the linear polymers afforded self-extinguishing polymers. The linear polymers and copolymers may be classified as “self-reactive” polymers which yield thermosetting polystyrenes.     

Synthesis of homologous monomers and polymers of carbazole,phenothiazine and dibenzazepine

Monomers and polymers of 3-vinyl-N-ethylcarbazole, 3-vinyl-N-methylphenothiazine, 3,7-divinyl-N-methylphenothiazine, N-acrylylcarbazole, N-acrylylphenothiazine, and N-acrylyl- and N-methacrylyldibenzazepine have been synthesized. The synthetic procedures for preparing the monomers and polymers are described.     

Synthesis and characterization of two new aryl cyclobutyl ketoethyl methacrylate monomers and their polymers

Two new methacrylate monomers, 2‐[3‐(6‐tetralino)‐3‐methylcyclobutyl]‐2‐ketoethyl methacrylate (TKEMA) and 2‐(3‐mesityl‐3‐methylcyclobutyl)‐2‐ketoethyl methacrylate (MKEMA), were obtained from the reaction of 1‐chloroacetyl‐3‐methyl‐3‐arylcyclobutane with sodium methacrylate. The oxime and hydrazone derivatives of poly(TKEMA) and poly(MKEMA) were prepared with hydroxylamine and 2,4‐dinitrophenyl hydrazine. Poly(TKEMA) and poly(MKEMA), their oxime and hydrazone derivatives, and the monomers were characterized with Fourier transform infrared and NMR techniques. The glass‐transition temperatures and thermal stability of the polymers and their oxime and hydrazone derivatives were compared. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4167–4173, 2001     

Synthesis of well‐defined macromonomers and comb copolymers from polymers made by atom transfer radical polymerization

Poly(n‐butyl acrylate) macromonomers with predetermined molecular weights (1300 < number‐average molecular weight < 23,000) and low polydispersity indices (<1.2) were synthesized from bromine‐terminated atom transfer radical polymerization polymers via end‐group substitution with acrylic acid and methacrylic acid. These macromonomers, having a high degree of end‐group functionalization (>90%), were radically homopolymerized to obtain comb polymers. A high macromonomer concentration, combined with a low radical flux, was needed to obtain a high conversion of the macromonomers and a reasonable degree of polymerization. By the traditional radical copolymerization of the hydrophobic macromonomers with the hydrophilic monomer N,N‐dimethylaminoethyl methacrylate (DMAEMA), amphiphilic comb copolymers were obtained. The conversions of the macromonomers and comonomer were almost quantitative under optimized reaction conditions. The molecular weights were high (number‐average molecular weight ≈70,000), and the molecular weight distribution was broad (polydispersity index ≈ 3.5). Kinetic measurements showed simultaneous decreases in the macromonomer and DMAEMA concentrations, indicating a relatively homogeneous composition of the comb copolymers over the whole molecular weight range. This was supported by preparative size exclusion chromatography. The copolymerization of poly(n‐butyl acrylate) macromonomers with other hydrophilic monomers such as acrylic acid or N,N‐dimethylacrylamide gave comb copolymers with multimodal molecular weight distributions in size exclusion chromatography and extremely high apparent molecular weights. Dynamic light scattering showed a heterogeneous composition consisting of small (6–9 nm) and large (23–143 nm) particles, probably micelles or other type of aggregates. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3425–3439, 2003     

Cyclodextrins in polymer synthesis: free radical polymerization of cyclodextrin host‐guest complexes of methyl methacrylate or styrene from homogenous aqueous solution

The polymerization of methylated β‐cyclodextrin (m‐β‐CD) 1 : 1 host‐guest compounds of methyl methacrylate (MMA) ( 1 ) or styrene ( 2 ) is described. The polymerization of complexes 1 a and 2 a was carried out in water with potassium peroxodisulfate (K₂S₂O₈)/sodium hydrogensulfite (NaHSO₃) as radical redox initiator at 60°C. Unthreading of m‐β‐CD during the polymerization led to water‐insoluble poly(methyl methacrylate) (PMMA) ( 3 ) and polystyrene ( 4 ). By comparison, analogously prepared polymers from uncomplexed monomers 1 and 2 in ethanol as organic solvent with 2,2′‐azoisobutyronitrile (AIBN) as radical initiator showed significantly lower molecular weights and were obtained in lower yields in all cases. Polymerization of m‐β‐CD complexed MMA in water, initiated with 2,2′‐azobis(N,N ′‐dimethyleneisobutyroamidine) dihydrochloride, occurred much faster than the polymerization of uncomplexed MMA in methanol under similar conditions. Furthermore, it was shown, that the precipitation polymerization of complexed MMA from homogeneous aqueous solution can be described by equations (P_n^–1 ∝ lsqb;Irsqb;^0.5) similar to those for classical polymerization in solution.