REACTION MECHANISM OF BENZOPHENONE-PHOTOINITIATED CROSSLINKING OF POLYETHYLENE

The radical intermediates, the crosslink microstructures, and the reaction mechanism of benzophenone (BP)-photoinitiated crosslinking of low-density polyethylene (LDPE) and model compounds (MD) have been reviewed in detail.The spin-trapping electron spin resonance (ESR) spectra obtained from the LDPE/BP systems with spin-trap agents showthat two kinds of polymer radical intermediates are mainly formed: tertiary carbon and secondary carbon radicals. The spin-trapping ESR studies of MD/BP systems give further evidence that photocrosslinking reactions of PE predominantly takeplace at sites of tertiary carbon, secondary carbon, and especially allylic carbon when available. The high resolution ~(13)C-NMR spectra obtained from LDPE and MD systems show that the crosslink microstructures have H- and Y-type links andthat their concentrations are of the same order. The fluorescence, ESR ~(13)C and ~1H-NMR spectra from the PE and MDsystems demonstrate that the main photoreduction product of BP(PPB) is benzpinacol formed by the recombination of twodiphenylhydroxymethyl (K·) radical intermediates. Two new PPB products: an isomer of benzpinacol with quinoid structure,1-phenylhydroxymethylene-4-diphenylhydroxymethyl-2, 5-cyclohexadiene and three kinds of α-alkyl-benzhydrols have beendetected and identified. These results provide new experimental evidence for elucidating the reaction mechanism in the BP-photoinitiated crosslinking of polyethylene.     

ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent. IV. Effect of sulfur‐ and phosphorous‐type antioxidants

The effect of an antioxidant on the reaction mechanisms of chemical crosslinking of polyethylene (PE) with dicumyl peroxide (DCP) at high temperatures was investigated using electron spin resonance (ESR). For sulfur‐ and phosphorous‐type antioxidants, changes of radical species and their contents during the PE crosslinking reaction were observed. It was confirmed that these antioxidants reacted preferentially with radicals yielded by decomposed DCP, restraining the crosslinking of PE by the increased antioxidant content. The compound of DCP and antioxidant decomposed to form 2‐phenyl isopropyl radicals. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3092–3099, 2000     

Well‐defined PE‐b‐PDMS diblock copolymers via the combination of thiol‐ene click and esterification reactions: Facile synthesis and compatibilization for HDPE/silicone oil blends

Well‐defined diblock copolymers of linear polyethylene (PE) and poly(dimethylsiloxane) (PDMS) have been synthesized through a facile route combining the thiol‐ene click chemistry of vinyl‐terminated polyethylene (PE‐ene) and the sequential esterification reaction. The resulting diblock copolymers are characterized by ¹H NMR, FT‐IR, DSC, TGA, and TEM. In addition, the PE‐b‐PDMS diblock copolymers have been evaluated as compatibilizers in the blends of high‐density polyethylene (HDPE) and silicone oil. The morphological analysis and mechanical properties demonstrate that the compatibilized blends with low loading concentration of PE‐b‐PDMS display significant improvements in modulus of elasticity and elongation at break as compared to the uncompatibilized binary blends. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3205–3212     

ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent—II. The effect of phenolic antioxidants

The effect of antioxidant on the reaction mechanism of chemical crosslinking of polyethylene (PE) with dicumyl peroxide (DCP) at high temperatures was investigated by electron spin resonance (ESR). The antioxidant reacts with the alkyl radicals in PE formed by the thermal decomposition of DCP above 120°C, and disturbs the crosslinking. A phenolic type antioxidant produced the phenoxy radical by the reaction with alkyl radicals formed in PE. It is suggested that the selection of a suitable antioxidant for PE crosslinking can be made by ESR analysis. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2431–2439, 1997     

Emulsion polymerization of ethylene from mesoporous silica nanoparticles with vinyl functionalized monolayers

Emulsion polymerization of ethylene from vinyl functionalized mesoporous silica nanoparticles (V‐MSNs) was reported. V‐MSNs were synthesized via deposition of vinyl monolayers on the pore walls, and the relative surface coverage of the vinyl monolayers was 74%. A fluorinated P‐O‐chelated nickel catalyst coordinated to the vinyl groups. These V‐MSNs hosting catalysts were full dispersed in water assisted by ultrasonic processor in the presence of surfactants. After addition of ethylene, polyethylene (PE) chains grew from the pores of V‐MSNs, formation of stable nanocomposite latices with solid content up to 17.3%. Our method made V‐MSNs well‐dispersed in the PE matrix. Especially, because of a strong interaction between PE and nanoparticles, a stable V‐MSNs core/PE shell structure was formed upon thermal treatment above melting temperature of the PE. Samples were analyzed by a number of techniques including TEM, N₂ adsorption‐desorption, FTIR, and solid state ²⁹Si NMR, DLS, ¹H NMR, GPC, and DSC. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1393–1402, 2009     

ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent. III. Effect of amine type antioxidants

The effect of antioxidant on the reaction mechanism of chemical crosslinking of polyethylene with dicumyl peroxide (DCP) at high temperatures was investigated by electron spin resonance (ESR). The crosslinking reactions were induced by the alkyl radicals in polyethylene (PE) formed by the thermal decomposition of DCP above 120°C. The type and the content of radicals were much changed for amine type antioxidants on PE crosslinking. It was confirmed that the radicals originated from DCP decomposition reacted preferentially with the amine type antioxidants to produce the nitroxyl radical and that the antioxidants retarded the initiation reaction of the PE crosslinking reaction. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 349–356, 1999     

Well‐defined non‐linear polyethylene‐based macromolecular architectures

Polyethylene (PE)‐based 3‐ and 4‐miktoarm star [PE(PCL)₂, PE(PCL)₃] and H‐type [(PCL)₂PE(PCL)₂] block copolymers [polycaprolactone (PCL)] were synthesized by a combination of polyhomologation, chlorosilane chemistry, and ring opening polymerization (ROP). The following steps were used for the synthesis of the miktoarm stars: (a) reaction of a hydroxy‐terminated polyethylene (PE‐OH), prepared by polyhomologation of dimethylsulfoxonium methylide with a monofunctional boron initiator followed by oxidation/hydrolysis, with chloromethyl(methyl)dimethoxysilane or chloromethyltrimethoxysilane; (b) hydrolysis of the produced ω‐di(tri)methoxysilyl‐polyethylenes to afford ω‐dihydroxy‐polyethylene (difunctional initiator) and ω‐trihydroxy‐polyethylene (trifunctional initiator); and (c) ROP of ɛ‐caprolactone with the difunctional (3‐miktoarm star) or trifunctional macroinitiator (4‐miktoarm star), in the presence of 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2λ⁵,4λ⁵‐catenadi(phosphazene) (t‐BuP₂). The H‐type block copolymers were synthesized using the same strategy, but with a difunctional polyhomologation initiator. All intermediates and final products were characterized by HT‐GPC, ¹H NMR and FTIR analyses. Thermal properties of the PE precursors and all final products were investigated by DSC and TGA. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2129–2136     

One‐step synthesis of hyperbranched polyethylene macroinitiator and its block copolymers with methyl methacrylate or styrene via ATRP

Block copolymers of hyperbranched polyethylene (PE) and linear polystyrene (PS) or poly(methyl methacrylate) (PMMA) were synthesized via atom transfer radical polymerization (ATRP) with hyperbranched PE macroinitiators. The PE macroinitiators were synthesized through a “living” polymerization of ethylene catalyzed with a Pd‐diimine catalyst and end‐capped with 4‐chloromethyl styrene as a chain quenching agent in one step. The macroinitiator and block copolymer samples were characterized by gel permeation chromatography, ¹H and ¹³C NMR, and differential scanning calorimetry. The hyperbranched PE chains had narrow molecular weight distribution and contained a single terminal benzyl chloride per chain. Both hyperbranched PE and linear PS or PMMA blocks had well‐controlled molecular weights. Slow initiation was observed in ATRP because of steric effect of hyperbranched structures, resulting in slightly broad polydispersity index in the block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3024–3032, 2010     

Catalyzed chain growth of polyethylene on magnesium for the synthesis of macroalkoxyamines: Application to the production of block copolymers using controlled radical polymerization

A synthetic method for the production of polyethylene (PE) chains carrying alkoxyamine end‐group has been proposed first by successfully reacting the well‐known 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) and N‐(2‐methyl‐2‐propyl)‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl)‐N‐oxyl (commonly called SG1) stable radicals with dipolyethylenylmagnesium compounds to give PE‐TEMPO and PE‐SG1. Since the homolytic cleavage of these two macroalkoxyamines for the production of block copolymers using controlled radical polymerization would require temperatures higher than 160 °C, two original new nitroxides (4‐[(2,2‐dimethyl‐4‐(N‐tert‐Butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxy)‐4‐n‐butoxycarbonyl)butanoyloxyl]‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy, DD1) and 4‐[(2,2‐dimethyl‐4‐(N‐tert‐Butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxy)‐4‐phenyl) butanoyloxyl]‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy, DD2) containing a TEMPO moiety and incorporating an SG1‐based alkoxyamine (cleavage temperature: 60 °C) were then synthesized. NMR analyses showed that the resulting PE‐DD1 and PE‐DD2 were obtained using this functionalization strategy though with low to moderate yields (from 17% to 40%). PE‐DD2 (40% functionalization) was used under controlled radical polymerization conditions of n‐butyl acrylate. SEC analyses together with ¹H NMR analysis showed that a poly(ethylene‐b‐n‐butyl acrylate) block copolymer was produced and that the polymerization proceeded under control. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2705–2718, 2007     

13C NMR and electron spin resonance analyses of the radical polymerization of diisopropyl itaconate

Radical polymerizations of dialkyl itaconates were performed in benzene at 50 °C. The ¹³C NMR spectra of the obtained polymers indicated that intramolecular chain‐transfer reaction had taken place more frequently in the polymerizations of itaconates with bulkier ester groups as follows: isopropyl (i‐Pr) > n‐butyl (n‐Bu) ≈ ethyl (Et) > methyl (Me). In addition to the ¹³C NMR analysis, an electron spin resonance (ESR) analysis was conducted for polymerizations of diisopropyl itaconate, the ESR spectra of which consisted of two kinds of resonances due to the radicals with different conformations. It was assumed that the difference in conformation was attributable to the stereosequences near the propagating chain end because the relative intensity ratios of the resonances varied with the magnitude of the intramolecular chain‐transfer reaction, which was accompanied by a decrease in the syndiotacticity of the obtained poly(diisopropyl itaconate)s. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4513–4522, 2002     

An NMR investigation on the phase structure and molecular mobility of the novel exfoliated polyethylene/palygorskite nanocomposites

Novel exfoliated polyethylene (PE)/palygorskite nanocomposites prepared by in situ polymerization are characterized by solid‐state nuclear magnetic resonance (NMR). The phase structure and molecular mobility are investigated by a combination of proton and carbon NMR. The results showed that incorporation of small amounts of palygorskite had great influence on the phase structure and molecular mobility. The incorporated palygorskite hindered the crystallization process and introduced motion‐hindered chains in the NMR crystalline and amorphous phase. ¹³C cross‐polarization and magic‐angle spinning NMR revealed two orthorhombic crystalline phase with different line‐width. The chain mobility of orthorhombic crystalline phase with broad resonance line is obviously hindered compared with the phase with narrow resonance line when the filler is introduced. Additionally, the results of pulsed field gradient NMR technique show those the tortuosities in the nanocomposites are much higher than that in the bulk PE. The self‐diffusion process of probe molecules is also influenced by the palygorksite load. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1363–1371, 2010     

Highly branched and high‐molecular‐weight polyethylenes produced by 1‐[2,6‐bis(bis(4‐fluorophenyl)methyl)‐4‐MeOC6H2N]‐2‐aryliminoacenaphthylnickel(II) halides

A series of unsymmetrical 1‐[2,6‐bis(bis(4‐fluorophenyl)methyl)‐4‐MeOC₆H₂N]‐2‐aryliminoacenaphthene‐nickel(II) halides has been synthesized and fully characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance (¹H NMR), ¹³C NMR, and ¹⁹F NMR spectroscopy as well as elemental analysis. The structures of Ni1 and Ni6 have been confirmed by the single‐crystal X‐ray diffraction. On activation with cocatalysts either ethylaluminum sesquichloride or methylaluminoxane, all the title nickel complexes display high activities toward ethylene polymerization up to 16.14 × 10⁶ g polyethylene (PE) mol^?1(Ni) h^?1 at 30 °C, affording PEs with both high branches (up to 103 branches/1000 carbons) and molecular weight (1.12 × 10⁶ g mol^?1) as well as narrow molecular weight distribution. High branching content of PE can be confirmed by high temperature ¹³C NMR spectroscopy and differential scanning calorimetry. In addition, the PE exhibited remarkable property of thermoplastic elastomers (TPEs) with high tensile strength (σ_b = 21.7 MPa) and elongation at break (ε_b = 937%) as well as elastic recovery (up to 85%), indicating a better alternative to commercial TPEs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 130–145     

Synthesis and solution properties of a pH‐responsive cyclopolymer of zwitterionic ethyl 3‐(N,N‐diallylammonio)propanephosphonate

The zwitterionic monomer, ethyl 3‐(N,N‐diallylammonio)propanephosphonate, was cyclopolymerized in aqueous solutions using t‐butylhydroperoxide or ammonium persulfate as initiators to afford a polyphosphonobetaine (PPB). The protonation of P(?O)OEtO^– and deprotonation of ? NH⁺ groups in PPB by HCl and NaOH, gave the corresponding cationic polyphosphononic acid (CPP) and anionic polyphosphonate (APP). The presence of two pH‐responsive functionalities in APP has led to establish the equilibria: APP ? PPB ? CPP, the position of which very much dictates the viscosity behavior of its aqueous solution. The PPB demonstrated “antipolyelectrolyte” viscosity behavior; however, in contrast to many polycarbo‐ and polysulfo‐betaines, it was found to be soluble in salt‐free water as well as in salt‐added solutions. Basicity constant (K₁) of the amine group in APP, as determined by potentiometric technique, were found to be “apparent,” and as such followed the modified Henderson‐Hasselbalch equation. The study demonstrated a correlation between the basicity constants and viscosity values. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A new tricrystalline triblock terpolymer by combining polyhomologation and ring‐opening polymerization. synthesis and thermal properties

New tricrystalline triblock terpolymers, polyethylene‐block‐poly(ε‐caprolactone)‐block‐poly(L‐lactide) (PE‐b‐PCL‐b‐PLLA), were synthesized by ROP of ε‐caprolactone (CL) and L‐lactide (LLA) from linear ω‐hydroxyl polyethylene (PE‐OH) macroinitiators. The linear PE‐OH macroinitiators were prepared by C1 polymerization of methylsulfoxonium methylide (polyhomologation). Tin(II) 2‐ethylhexanoate was used as the catalyst for the sequential ROP of CL and LLA in one‐pot polymerization at 85 °C in toluene (PE‐OH macroinitiators are soluble in toluene at 80 °C). ¹H NMR spectra confirmed the formation of PE‐b‐PCL‐b‐PLLA triblock terpolymers through the appearance of the characteristic proton peaks of each block. GPC traces showed the increase in the number average molecular weight from PE‐OH macroinitiator to PE‐b‐PCL, and PE‐b‐PCL‐b‐PLLA corroborating the successful synthesis. The existence of three crystalline blocks was proved by DSC and XRD spectroscopy. © 2019 The Authors. Journal of Polymer Science Part A: Polymer Chemistry published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2450–2456     

Styrene polymerization catalyzed by metal porphyrin complex/MAO for in situ synthesizing polystyrene containing air stable π cation radicals

A novel catalyst system based on nickel(II) tetraphenylporphyrin (Ni(II)TPP) and methylaluminoxane for styrene polymerization was developed. This catalyst system has a high thermal stability and show fairly good activity. The obtained polystyrene (PS) was isotactic‐rich atactic polymer by ¹³C NMR analysis, and its molecular weight distribution was rather narrow (M_w/M_n ≈ 1.6, by GPC analysis). ESR revealed that Ni(II)TPP π cation radicals were formed in the polymerization and could remain in the resulting PS stably. The mechanism of the polymerization was discussed and a special coordination mechanism was proposed. The PS product containing Ni(II)TPP π cation radicals can be used as a potential functional material. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1240–1248, 2008     

Free radical initiated low temperature crosslinking of phenylethynyl (PE) end‐capped oligomides

A relatively low‐temperature crosslinking method for phenylethynyl (PE) end‐capped oligomides was developed. PE end‐capped oligomides are typically cured into crosslinked polyimides at 370 °C for about 1 h. The addition of a low viscosity mixed‐solvent of N‐methylpyrrolidinone (NMP)/dimethyl ether of polyethylene glycol (M = 250 g/mol), NMP/DM‐PEG‐250, or NMP/polyethylene glycol (M = 400 g/mol), NMP/PEG‐400, as film forming medium for PE‐end‐capped oligomides was investigated. Fourier transform infrared spectroscopy and ¹³C NMR showed that the mixed solvent addition was effective for achieving low‐temperature crosslinking of the ethynyl end‐caps over the temperature range 200–250 °C. The low temperature crosslinking process was explained by thermolysis of the PEG molecules over this temperature range forming free radical species such as ～CH₂CH₂O· or ～CH₂CH₂^· which initiate cure of the ethynyl groups resulting in a cross linked polyimide membrane. The PEG solvents also provide a radical source for the degradation polymerization of the solvents to a water and NMP insoluble polymer, which formed a miscible blend with the crosslinked membrane. Glass transition temperature (differential scanning calorimetry) data and thermo gravimetric analysis data provide evidence for the miscible blend. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3950–3963, 2010.     

Synthesis of poly(ω‐pentadecalactone)‐b‐poly(acrylate) diblock copolymers via a combination of enzymatic ring‐opening and RAFT polymerization techniques

Herein the first reported preparation of diblock copolymers of the polyethylene‐like polyester poly(ω‐pentadecalactone) (PPDL) via a combination of enzymatic ring‐opening polymerization (eROP) and reversible addition‐fragmentation chain‐transfer (RAFT) polymerization techniques is described. PPDL was synthesized via eROP using Novozyme 435 as a catalyst and a bifunctional initiator/chain transfer agent (CTA) appropriate for the eROP of ω‐pentadecalactone (PDL) and RAFT polymerization of acrylic and styrenic monomers. Chain growth of the PPDL macro‐CTA was performed to prepare acrylic and styrenic diblock copolymers of PPDL, and demonstrates a facile, metal‐free, and “greener” alternative to preparing acrylic diblock copolymers of polyethylene (PE). Diblock copolymer architecture was substantiated via analysis of ¹H NMR spectroscopic, UV‐GPC chromatographic, DSC onset crystallization (T_c), and MALDI‐ToF mass spectrometric data. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3326–3335     

Polymersome‐forming amphiphilic glycosylated polymers: Synthesis and characterization

Copper‐catalyzed azide‐alkyne cycloaddition (CuAAC) was used to prepare glycosylated polyethylene (PE)–poly(ethylene glycol) (PEG) amphiphilic block copolymers. The synthetic approach involves preparation of alkyne‐terminated PE‐b‐PEG followed by CuAAC reaction with different azide functionalized sugars. The alkyne‐terminated PE‐b‐PEG was prepared by etherification reaction between hydroxyl‐terminated PE‐b‐PEG (M_n ～ 875 g mol^?1) and propargyl bromide and azidoethyl glycosides were prepared by glycosylation of 2‐azidoethanol. Atmospheric pressure solids analysis probe‐mass spectrometry was used as a novel solid state characterization tool to determine the outcome of the CuAAC click reaction and end‐capping of PE‐b‐PEG by the azidoethyl glycoside group. The aqueous solution self‐assembly behavior of these amphiphilic glycosylated polymers was explored by TEM and dye solubilization studies. Carbohydrate‐bearing spherical aggregates with the ability to solubilize a hydrophobic dye were observed. The potential of these amphiphilic glycosylated polymers to self‐assemble via electro‐formation into giant carbohydrate‐bearing polymersomes was also investigated using confocal fluorescence microscopy. An initial bioactivity study of the carbohydrate‐bearing aggregates is furthermore presented. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5184–5193     

Grafting of functional nitroxyl free radicals to polyolefins as a tool to postreactor modification of polyethylene‐based materials with control of macromolecular architecture

Nitroxyl radicals were used as functionalizing agents during the free radical postreactor modification process of polyolefins carried out in the melt. The 4‐hydroxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (HO‐TEMPO) and the 4‐benzoyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (BzO‐TEMPO) free radicals were successfully grafted onto a polyethylene‐based material (ethylene‐co‐1‐octene copolymer) by coupling reaction with polymer macroradicals; these last were formed by H‐abstraction through peroxide addition. The macromolecular structure of the functionalized polyolefins was assessed by ¹H‐NMR, FTIR spectroscopy, and SEC measurements which were used to evidence the grafting site, to evaluate the grafting level and to highlight the occurrence of chain extension through crosslinking side reactions. Indeed the use of proper model compounds allowed the preparation of accurate FTIR calibration curves for the quantitative determination of the functionalization degree. Besides the high temperature SEC analysis highlighted that this fast and simple coupling reaction between macroradicals and nitroxyl free radicals grants the grafting of functionalities onto the polyolefin backbone by contemporarily preventing the side reactions liable of the structure and MW modification of the pristine polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Complementarity of universal calibration SEC and 13C NMR in determining the branching state of polyethylene

The quantitation of long‐chain branching (LCB) and short‐chain branching (SCB) in polyethylene (PE) was accomplished with a combination of carbon nuclear magnetic resonance (¹³C NMR) spectroscopy and size exclusion chromatography (SEC) with universal calibration. We demonstrate how the spectroscopic and chromatographic techniques can supplement each other, as neither is capable individually of completely describing the molecular architecture imparted by the various types of branching. The essential lack of impact of SCB on the hydrodynamic volume imposes a limit on SEC for determining this type of branching, whereas highly effective LCB in the PE molecule may not offer a statistically large enough amount of long chains for accurate determination by NMR. A variety of examples are given for PE, showcasing the advantages and shortcomings of each analytical method and their complementarity. Additionally, the importance of choosing an appropriate linear standard and viscosity shielding ratio (ϵ) for the Zimm–Stockmayer branching calculations employed for analyzing SEC data is emphasized with an examination of the effect on the results of using a branched standard and various ϵ values. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3120–3135, 2000