Synthesis and characterization of well‐defined ABC 3‐Miktoarm star‐shaped terpolymers based on poly(styrene), poly(ethylene oxide), and poly(ϵ‐caprolactone) by combination of the “living” anionic polymerization with the ring‐opening polymerization

A series of well‐defined ABC 3‐Miktoarm star‐shaped terpolymers [Poly(styrene)‐Poly(ethylene oxide)‐Poly(ε‐caprolactone)](PS‐PEO‐PCL) with different molecular weight was synthesized by combination of the “living” anionic polymerization with the ring‐opening polymerization (ROP) using macro‐initiator strategy. Firstly, the “living” poly(styryl)lithium (PS^?Li⁺) species were capped by 1‐ethoxyethyl glycidyl ether(EEGE) quantitatively and the PS‐EEGE with an active and an ethoxyethyl‐protected hydroxyl group at the same end was obtained. Then, using PS‐EEGE and diphenylmethylpotassium (DPMK) as coinitiator, the diblock copolymers of (PS‐b‐PEO)_p with the ethoxyethyl‐protected hydroxyl group at the junction point were achieved by the ROP of EO and the subsequent termination with bromoethane. The diblock copolymers of (PS‐b‐PEO)_d with the active hydroxyl group at the junction point were recovered via the cleavage of ethoxyethyl group on (PS‐b‐PEO)_p by acidolysis and saponification successively. Finally, the copolymers (PS‐b‐PEO)_d served as the macro‐initiator for ROP of ε‐CL in the presence of tin(II)‐bis(2‐ethylhexanoate)(Sn(Oct)₂) and the star(PS‐PEO‐PCL) terpolymers were obtained. The target terpolymers and the intermediates were well characterized by ¹H‐NMR, MALDI‐TOF MS, FTIR, and SEC. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1136–1150, 2008     

Block and star block copolymers by mechanism transformation 9: Preparation and characterization of poly(methyl methacrylate)/poly(1,3‐dioxepane)/polystyrene ABC miktoarm star copolymers by combination of reversible addition–fragmentation chain‐transfer polymerization and cationic ring‐opening polymerization

The miktoarm ABC star copolymer with three different branches, polystyrene (PS), poly(1,3‐dioxepane) (PDOP), and poly(methyl methacrylate) (PMMA), was successfully prepared. PS with two transfer groups, hydroxyl and dithiobenzoate groups [PS‐HECA‐SC(S)Ph], was synthesized by the reaction of a dithiobenzoate group at the end of PS with hydroxyethylene cinnamate (HECA) in tetrahydrofuran solution. Then, the cationic ring‐opening polymerization of 1,3‐dioxepane was initiated by triflic acid in the presence of PS‐HECA‐SC(S)Ph and diblock copolymer, PS‐PDOP, was formed. Finally, the diblock copolymer with the dithiobenzoate group situated between the two blocks was used in the reversible addition–fragmentation transfer (RAFT) process of methyl methacrylate (MMA). The miktoarm ABC star copolymer S(PS)(PDOP)(PMMA) was characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1243–1250, 2003     

One‐pot preparation of ABA‐type block‐graft copolymers via a combination of “click” chemistry with atom transfer nitroxide radical coupling reaction

A new strategy for the one‐pot preparation of ABA‐type block‐graft copolymers via a combination of Cu‐catalyzed azide‐alkyne cycloaddition (CuAAC) “click” chemistry with atom transfer nitroxide radical coupling (ATNRC) reaction was reported. First, sequential ring‐opening polymerization of 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (GTEMPO) and 1‐ethoxyethyl glycidyl ether provided a backbone with pendant TEMPO and ethoxyethyl‐protected hydroxyl groups, the hydroxyl groups could be recovered by hydrolysis and then esterified with 2‐bromoisobutyryl bromide, the bromide groups were converted into azide groups via treatment with NaN₃. Subsequently, bromine‐containing poly(tert‐butyl acrylate) (PtBA‐Br) was synthesized by atom transfer radical polymerization. Alkyne‐containing polystyrene (PS‐alkyne) was prepared by capping polystyryl‐lithium with ethylene oxide and subsequent modification by propargyl bromide. Finally, the CuAAC and ATNRC reaction proceeded simultaneously between backbone and PtBA‐Br, PS‐alkyne. The effects of catalyst systems on one‐pot reaction were discussed. The block‐graft copolymers and intermediates were characterized by size‐exclusion chromatography, ¹H NMR, and FT‐IR in detail. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Facile synthesis of polyester dendrimer via combining thio‐bromo “Click” chemistry and ATNRC

This article reports on developing an efficient synthesis approach to aliphatic polyester dendrimer, poly(thioglycerol‐2‐propionate) (PTP), by combination of thio‐bromo “Click” chemistry with atom transfer nitroxide radical coupling (ATNRC). Through the one‐pot two‐step method, linear polystyrene with hydroxyl end groups (l‐PS‐2OH) was obtained by first atom transfer radical polymerization of styrene and following termination using 4‐(2,3‐dihydroxypropoxy)‐TEMPO (DHP‐TEMPO) to capture the PS macroradicals via ATNRC method. Using l‐PS‐2OH as support, the dendritic repeating units divergently were grown from the hydroxyl end groups via esterification and thio‐bromo “Click” reaction two‐step process. In every generation, the resulting intermediates l‐PS‐d‐PTP (G1‐G4) can be easily isolated from the excessive unreacted monomers by simple precipitation in ethanol without help of time, labor and solvent consuming column chromatographic purification. At last, cleavage of the alkoxyamine group between the PS support and dendrimer at elevated temperature (125 °C) provided the targeted polyester dendrimer PTP up to the fourth generation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1762–1768     

Synthesis of inverse star block copolymer by combination of ATRP,ring opening polymerization,and “click chemistry”

The inverse star block copolymer, (poly(ε‐caprolactone)‐b‐polystyrene)₂‐core‐(poly(ε‐caprolactone)‐b‐polystyrene)₂, [(PCL‐PS)₂‐core‐(PCL‐PS)₂] has been successfully prepared by combination of atom transfer radical polymerization (ATRP), ring opening polymerization (ROP), and “Click Chemistry.” The synthesis includes the following five steps: (1) synthesis of a heterofunctional initiator with two ATRP initiating groups and two hydroxyl groups; (2) formation of (Br‐PS)₂‐core‐(OH)₂ via ATRP of styrene; (3) preparation of the (PCL‐PS)₂‐core‐(OH)₂ through “click” reaction of the α‐propargyl, ω‐acetyl terminated PCL with (N₃‐PS)₂‐core‐(OH)₂ which was prepared by transformation of the terminal bromine groups in (Br‐PS)₂‐core‐(OH)₂ into azide groups; (4) the ROP of CL using (PCL‐PS)₂‐core‐(OH)₂ as macroinitiator to form (PCL‐PS)₂‐core‐(PCL‐OH)₂; and (5) preparation of the (PCL‐PS)₂‐core‐(PCL‐PS)₂ through the ATRP of styrene using (PCL‐PS)₂‐core‐(PCL‐Br)₂ as macroinitiator which was prepared by reaction of the terminal hydroxyl groups at the end of the PCL chains with 2‐bromoisobutyryl bromide. The characterization data support structures of the inverse star block copolymer and the intermediates. The differential scanning calorimeter results and polarized optical microscope observation showed that the intricate structure of the inverse star block copolymer greatly restricted the movement of the PS segments and PCL segments, resulted in the increase of the glass transition temperature of PS segments and the decrease of crystallization ability of PCL segments. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7757–7772, 2008     

Synthesis of tadpole polymers via triple click reactions: Copper‐catalyzed azide–alkyne cycloaddition,diels–alder,and nitroxide radical coupling reactions

We designed a trifunctional initiator ( 3 ) containing anthracene, bromide, and OH functionalities and subsequently used as an initiator in atom transfer radical Polymerization (ATRP) of styrene to yield linear polystyrene (PS) with α‐anthracene, OH, and ω‐bromide terminal groups, of which bromide is later transformed into azide to result in the linear anthracene‐, OH‐, and azide‐terminated PS (l‐α‐anthracene‐OH‐ω‐azide‐PS). The copper‐catalyzed azide–alkyne cycloaddition reaction between l‐α‐anthracene‐OH‐ω‐azide‐PS and α‐furan‐protected‐maleimide‐ω‐alkyne linkage, 4 afforded the linear anthracene‐, OH‐, and maleimide‐terminated PS. The cyclization via intramolecular Diels–Alder click reaction of this linear PS and the subsequent conversion of the hydroxyl into bromide resulted in the cyclic PS with one bromide located on the ring, (c‐PS)‐Br. Finally, the c‐PS‐Br was clicked with either well‐defined tetramethylpiperidine‐1‐oxyl‐terminated poly(ethylene glycol) (PEG) or poly(ε‐caprolactone) (PCL) yielding the tadpole polymer, (c‐PS)‐b‐PEG or (c‐PS)‐b‐PCL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of hyperbranched polystyrene via click reaction of AB2 macromonomer

Well‐defined hyperbranched polystyrenes have been successfully prepared by polymerization of AB₂ macromonomer, polystyrene containing an azide group at its one end and two terminal propargyl groups at the other end via click reaction. For preparation of AB₂ macromonomers, an ATRP initiator, bispropargyl 2‐bromosuccinate (BPBS) with two propargyl groups and one bromine group was synthesized by the successive bromination and esterification reaction of L ‐aspartic acid. The resulting BPBS initiated the ATRP of St, and subsequently, the terminal bromine groups of (CH≡C)₂‐PS‐Brs were substituted by N₃ via the reaction with sodium azide resulting the AB₂ macromonomer, (CH≡C)₂‐PS‐N₃ with various molecular weights. All intermediates and the resultant polymers were characterized by GPC, ¹H NMR, FTIR, and MALLS methods. The polymerization kinetics study showed fast increase of DP at the initial stage of polymerization and then slow increase of their DP. The final “HyperMacs” have high‐molecular weight up to M_w,MALLS = 340,000 g/mol, their molecular weight distributions were moderately narrow (M_w/M_n = 1.47–1.65). The ratios of [η]_H/[η]_L of the HyperMacs formed in the polymerization system increased with evolution of polymerization. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 454–462, 2010     

Preparation of α,ω‐telechelic hexyl acrylate polymers with ?OH, ?COOH,and ?NH2 functional groups by RAFT

The design, synthesis, and use of two new, stable, functionalized chain transfer agents (CTA's) containing OH and amine end groups for the RAFT polymerization is reported: 2‐hydroxyethoxy‐carbonylphenylmethyl dithiobenzoate and 2‐(2‐(tert‐butoxycarbonyl)ethylamino)‐2‐oxo‐1‐phenylethyl benzodithioate, respectively. The RAFT polymerization of n‐hexyl acrylate (HA) using those CTA's, were compared to several other functionalized dithiobenzoate esters reported in the literature containing COOH and Ester groups. The performances of the dithiobenzoates were compared in terms of kinetics and molecular weight distribution control. Good control in polymerization of n‐hexyl acrylate with a linear increase of M_n with conversion mantaining polydispersity indices (PDI) below 1.1 was obtained by use of the new functionalized CTA's developed and also by use of some other CTA's tested, to produce well‐defined linear polymers with one specific chain‐end functionality: ? OH, ? COOH or Amine. Using a postpolymerization reaction with functionalized azocompounds in a 5 to 1 ratio, α,ω‐telechelic polymers, with ? OH or ? COOH as functional group at the second end were obtained. By using this synthetic strategy α,ω‐homotelechelic and heterotelechelic polymers were readily prepared. The chemical availability of functional end‐groups in the telechelics was demonstrated by reaction with methacrylic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3033–3051, 2010     

Synthesis of ABCD 4‐Miktoarm star‐shaped quarterpolymers by combination of the “click” chemistry with multiple polymerization mechanism

Well‐defined ABCD 4‐Miktoarm star‐shaped quarterpolymers of [poly(styrene)‐poly(tert‐butyl acrylate)‐poly(ethylene oxide)‐poly(isoprene)] [star(PS‐PtBA‐PEO‐PI)] were successfully synthesized by the combination of the “click” chemistry and multiple polymerization mechanism. First, the poly(styryl)lithium (PS^?Li⁺) and the poly(isoprene)lithium (PI^?Li⁺) were capped by ethoxyethyl glycidyl ether (EEGE) to form the PS and PI with both an active ω‐hydroxyl group and an ω′‐ethoxyethyl‐protected hydroxyl group, respectively. After these two hydroxyl groups were selectively modified to propargyl and 2‐bromoisobutyryl group for PS, the resulted PS was used as macroinitiator for ATRP of tBA monomer and the diblock copolymer PS‐b‐PtBA with a propargyl group at the junction point was achieved. Then, using the functionalized PI as macroinitiator for ROP of EO monomer and bromoethane as blocking agent, the diblock copolymer PI‐b‐PEO with a protected hydroxyl group at the conjunction point was synthesized. After the hydrolysis, the recovered hydroxyl group of PI‐b‐PEO was modified to bromoacetyl and then azide group successively. Finally, the “click” chemistry between them was proceeded smoothly. The obtained star‐shaped quarterpolymers and intermediates were characterized by ¹H NMR, FT‐IR, and SEC in detail. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2154–2166, 2008     

Synthesis of AB3‐type miktoarm star polymers with steroid core via a combination of “Click” chemistry and ring opening polymerization techniques

Well‐defined AB₃‐type miktoarm star‐shaped polymers with cholic acid (CA) core were fabricated with a combination of “click” chemistry and ring opening polymerization (ROP) methods. Firstly, azide end‐functional poly(ethylene glycol) (mPEG), poly(methyl methacrylate) (PMMA), polystyrene (PS), and poly(ε‐caprolactone) (PCL) polymers were prepared via controlled polymerization and chemical modification methods. Then, CA moieties containing three OH groups were introduced to these polymers as the end groups via Cu(I)‐catalyzed click reaction between azide end‐functional groups of the polymers ( mPEG‐N₃ , PMMA‐N₃ , PS‐N₃ , and PCL‐N₃ ) and ethynyl‐functional CA under ambient conditions, yielding CA end‐functional polymers ( mPEG‐Cholic , PMMA‐Cholic , PS‐Cholic , and PCL‐Cholic ). Finally, the obtained CA end‐capped polymers were employed as the macroinitiators in the ROP of ε‐caprolactone (ε‐CL) yielding AB₃‐type miktoarm star polymers ( mPEG‐Cholic‐PCL₃ , PMMA‐Cholic‐PCL₃ , and PS‐Cholic‐PCL₃ ) and asymmetric star polymer [ Cholic‐(PCL)₄ ]. The chemical structures of the obtained intermediates and polymers were confirmed via Fourier transform infrared and ¹H nuclear magnetic resonance spectroscopic techniques. Thermal decomposition behaviors and phase transitions were studied in detail using thermogravimetric analysis and differential scanning calorimetry experiments. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3390–3399     

An efficient synthetic route to well‐defined theta‐shaped copolymers

A series of well‐defined θ‐shaped copolymers composed of polystyrene (PS) and poly(ε‐caprolactone) (PCL) with controlled molecular weight and narrow molecular weight distribution have been successfully synthesized without any purification procedure by the combination of atom transfer radical polymerization (ATRP), ring‐opening polymerization (ROP), and the “click” chemistry. The synthetic process involves two steps: (1) synthesis of AB₂ miktoarm star copolymers, which contain one PCL chain terminated with two acetylene groups and two PS chains with two azido groups at their one end, (α,α′‐diacetylene‐PCL) (ω‐azido‐PS)₂, by ROP, ATRP, and the terminal group transformation; (2) intramolecular cyclization of AB₂ miktoarm star copolymers to produce well‐defined pure θ‐shaped copolymers using “click” chemistry under high dilution. The ¹H NMR, FTIR, and gel permeation chromatography techniques were applied to characterize the chemical structures of the resultant intermediates and the target polymers. Their thermal behavior was investigated by DSC. The mobility decrease of PCL chain across PS ring in the theta‐shaped copolymers restricts the crystallization ability of PCL segment. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2620–2630, 2009     

Synthesis of ω‐sulfonated polystyrene via reversible addition fragmentation chain transfer polymerization and postpolymerization modification

The synthesis of chain‐end sulfonated polystyrene [PS (ω‐sulfonated PS)] by reversible addition fragmentation chain transfer (RAFT) polymerization followed by postpolymerization modification was investigated by two methods. In the first method, the polymer was converted to a thiol‐terminated polymer by aminolysis. This polymer was then sulfonated by oxidation of the thiol end‐group with m‐chloroperoxybenzoic acid (m‐CPBA) to produce a sulfonic acid end‐group. In the second method, the RAFT‐polymerized polymer was directly sulfonated by oxidation with m‐CPBA. After purification by column chromatography, ω‐sulfonated PS was obtained by both methods with greater than 95% end‐group functionality as measured by titration. The sulfonic acid end‐group could be neutralized with various ammonium or imidazolium counter ions through acid–base or ionic metathesis reactions. The effect of the ionic end‐groups on the glass transition temperature of the PS was found to be consistent with what is known for PS ionomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

ABC type miktoarm star copolymers through combination of controlled polymerization techniques with thiol‐ene and azide‐alkyne click reactions

ABC type miktoarm star copolymer with polystyrene (PS), poly(ε‐caprolactone) (PCL) and poly(ethylene glycol) (PEG) arms was synthesized using controlled polymerization techniques in combination with thiol‐ene and copper catalyzed azide‐alyne “click” reactions (CuAAC) and characterized. For this purpose, 1‐(allyloxy)‐3‐azidopropan‐2‐ol was synthesized as the core component in a one‐step reaction with high yields (96%). Independently, ω‐thiol functionalized polystyrene (PS‐SH) was synthesized in a two‐step protocol with a very narrow molecular weight distribution. The bromo end function of PS obtained by atom transfer radical polymerization was first converted to xanthate function and then reacted with 1, 2‐ethandithiol to yield desired thiol functional polymer (PS‐SH). The obtained polymer was grafted onto the core by thiol‐ene click chemistry. In the following stage, ε‐caprolactone monomer was polymerized from the core by ring opening polymerization (ROP) using tin octoate as catalyst through hydroxyl groups to form the second arm. Finally, PEG‐acetylene, which was simply synthesized by the esterification of Me‐PEG and 5‐pentynoic acid, was clicked onto the core through azide groups present in the structure. The intermediates at various stages and the final miktoarm star copolymer were characterized by ¹H NMR, FTIR, and GPC measurements. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Sequential double polymer click reactions for the preparation of regular graft copolymers

In this study, graft copolymers with regular graft points containing polystyrene (PS) backbone and poly(methyl methacrylate) (PMMA), poly(tert‐butyl acrylate) (PtBA), or poly (ethylene glycol) (PEG) side chains were simply achieved by a sequential double polymer click reactions. The linear α‐alkyne‐ω‐azide PS with an anthracene pendant unit per chain was produced via atom transfer radical polymerization of styrene initiated by anthracen‐9‐ylmethyl 2‐((2‐bromo‐2‐methylpropanoyloxy)methyl)‐2‐methyl‐3‐oxo‐3‐(prop‐2‐ynyloxy) propyl succinate. Subsequently, the azide–alkyne click coupling of this PS to create the linear multiblock PS chain with pendant anthracene sites per PS block, followed by Diels–Alder click reaction with maleimide end‐functionalized PMMA, PtBA, or PEG yielded final PS‐g‐PMMA, PS‐g‐PtBA or PS‐g‐PEG copolymers with regular grafts, respectively. Well‐defined polymers were characterized by ¹H NMR, gel permeation chromatography (GPC) and triple detection GPC. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A versatile approach for the preparation of end‐functional polymers and block copolymers by stable radical exchange reactions

A versatile strategy for the preparation of end‐functional polymers and block copolymers by radical exchange reactions is described. For this purpose, first polystyrene with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group (PS‐TEMPO) is prepared by nitroxide‐mediated radical polymerization (NMRP). In the subsequent step, these polymers are heated to 130 °C in the presence of independently prepared TEMPO derivatives bearing hydroxyl, azide and carboxylic acid functionalities, and polymers such as poly(ethylene glycol) (TEMPO‐PEG) and poly(ε‐caprolactone) (TEMPO‐PCL). Due to the simultaneous radical generation and reversible termination of the polymer radical, TEMPO moiety on polystyrene is replaced to form the corresponding end‐functional polymers and block copolymers. The intermediates and final polymers are characterized by ¹H NMR, UV, IR, and GPC measurements. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2387–2395     

Synthesis of dendrimer‐like copolymers based on the star[Polystyrene‐Poly(ethylene oxide)‐Poly(ethoxyethyl glycidyl ether)] terpolymers by click chemistry

The dendrimer‐like copolymers [PEEGE‐(PS/PEO)]_n (n ≥ 2) based on the star[Polystyrene‐Poly(ethylene oxide)‐Poly(ethoxyethyl glycidyl ether)] [star(PS‐PEO‐(PEEGE‐OH))] terpolymers were synthesized by click chemistry. First, the star‐shaped copolymers star[PS‐PEO‐(PEEGE‐Alkyne)] (also termed as [PEEGE‐(PS/PEO)]₁) were synthesized by the reaction of hydroxyl end group at PEEGE arm (on star[PS‐PEO‐(PEEGE‐OH)]) with propargyl bromide. Then, the small molecule 1,4‐diazidobutane (DAB) with two azide groups and pentaerythritol tetrakis (2‐azidoisobutyrate) (PTAB) with four azide groups were synthesized and reacted with [PEEGE‐(PS/PEO)]₁ by the click chemistry for dendrimer‐like [PEEGE‐(PS/PEO)]₂ and [PEEGE‐(PS/PEO)]₄, respectively. However, in the latter case, only the [PEEGE‐(PS/PEO)]₃ was formed as the main product because of the steric effect. The final dendrimer‐like [PEEGE‐(PS/PEO)]_n copolymers were characterized by SEC and ¹H‐NMR in detail. Comparing with the SEC of their precursor [PEEGE‐(PS/PEO)]₁, the curves of [PEEGE‐(PS/PEO)]₂ was shifted to the shorter elution time, while that of [PEEGE‐(PS/PEO)]_n (n ≥ 3) was shifted to the longer elution time, which was attributed to the different hydrodynamic volume derived from their separate structures and compositions in THF solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4800–4810, 2009     

Synthesis of a model cyclic triblock terpolymer of styrene,isoprene, and methyl methacrylate

The synthesis of a model cyclic triblock terpolymer [cyclic(S‐b‐I‐b‐MMA] of styrene (S), isoprene (I), and methyl methacrylate (MMA) was achieved by the end‐to‐end intramolecular amidation reaction of the corresponding linear α,ω‐amino acid precursor [S‐b‐I‐b‐MMA] under high‐dilution conditions. The linear precursor was synthesized by the sequential anionic polymerization of S, I, and MMA with 2,2,5,5‐tetramethyl‐1‐(3‐lithiopropyl)‐1‐aza‐2,5‐disilacyclopentane as an initiator and amine generator and 4‐bromo‐1,1,1‐trimethoxybutane as a terminator and carboxylic acid generator. The separation of the unreacted linear polymer from the cyclic terpolymer was facilitated by the transformation of the unreacted species into high molecular weight polymers by the evaporation of the reaction solvent and the continuation of the reaction under high‐concentration conditions. The intermediate materials and the final cyclic terpolymer, characterized by size exclusion chromatography, vapor pressure osmometry, thin‐layer chromatography, IR and NMR spectroscopy, exhibited high molecular weight and compositional homogeneity. Dilute‐solution viscosity measurements were used as an additional proof of the cyclic structure. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1476–1483, 2002     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Macrocyclization of polymers via ring‐closing metathesis and azide/alkyne‐“click”‐reactions: An approach to cyclic polyisobutylenes

The end‐to‐end cyclization of telechelic polyisobutylenes (PIB's) toward cyclic polyisobutylenes is reported, using either ring‐closing metathesis (RCM) or the azide/alkyne‐“click”‐reaction. The first approach uses bisallyl‐telchelic PIB's (M_n = 1650, 3680, 9770 g mol^?1) and Grubbs 1st‐, 2nd‐, and 3rd‐generation catalyst leading to cyclic PIB's in 60–80% yield, with narrow polydispersities (M_w/M_n = 1.25). Azide/alkyne‐“click”‐reactions of bisalkyne‐telechelic PIB's (M_n = 3840 and 9820 g mol^?1) with excess of 1,11‐diazido‐undecane leads to the formation of mixtures of linear/cyclic PIB's under formation of oligomeric cycles. Subsequent reaction of the residual azide‐moieties in the linear PIB's with excess of alkyne‐telechelic PEO enables the chromatographic removal of the resulting linear PEO‐PIB‐block copolymers by column chromatography. Thus pure cyclic PIB's can be obtained using this double‐“click”‐method, devoid of linear contaminants. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 671–680, 2010     

Synthesis of twin‐tail tadpole‐shaped (cyclic polystyrene)‐ block‐[linear poly (tert‐butyl acrylate)]2 by combination of glaser coupling reaction with living anionic polymerization and atom transfer radical polymerization

The twin‐tail tadpole‐shaped (cyclic polystyrene)‐block‐[linear poly (tert‐butyl acrylate)]₂ [(c‐PS)‐b‐(l‐PtBA)₂] was synthesized by combination of Glaser coupling reaction with atom transfer radical polymerization (ATRP) and living anionic polymerization (LAP). First, the telechelic PS with an active and an ethoxyethyl‐protected hydroxyl groups at both ends was prepared by LAP of St monomers using lithium naphthalenide as initiator and terminated by 1‐ethoxyethyl glycidyl ether. And the alkyne groups were introduced onto each PS end by selectively reaction of active hydroxy group with propargyl bromide in NaH/tetrahydrofuran (THF) system. Then, the intramolecular cyclization was carried out by Glaser coupling reaction in pyridine/Cu(I)Br system in air atmosphere. Finally, the macroinitiator of c‐PS with two bromine groups at the junction point was synthesized via the cleavage of ethoxyethyl group and the subsequent esterification of the deprotected hydroxyl groups with 2‐bromoisobutyryl bromide. The copolymer of (c‐PS)‐b‐(l‐PtBA)₂ was obtained by ATRP of tBA monomers, and the PtBA segment was also hydrolyzed for (cyclic polystyrene)‐block‐(linear polyacrylic acid)₂ [(c‐PS)‐b‐(l‐PAA)₂]. The target copolymers and all intermediates were well characterized by GPC, MALDI‐TOF MS, and ¹H NMR in detail. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012