Feasibility study of an analytical method for detecting <Superscript>90</Superscript>Sr in soil using DGA resin and Sr resin

This study investigated an analytical method for detecting ⁹⁰Sr in soil samples for the routine monitoring of environmental radioactivity. Mineral acid leaching and fusion methods were first used to digest the soil sample, and the analytical results were compared. DGA resin was employed to separate ⁹⁰Y, being a daughter of ⁹⁰Sr. Then, ⁹⁰Y was analyzed by liquid scintillation counter (LSC). These analytical results were compared with those obtained using Sr resin, which is a well-known, simple and reliable separation method. With the DGA resin approach a minimum detectable activity of ~0.28 Bq kg^?1 was detected in a 50 g sample, with 180 min of counting time, 70% recovery and ~97% counting efficiency using a LSC.     

Rapid determination of 90Sr/90Y in water samples by liquid scintillation and Cherenkov counting

Strontium-90 (⁹⁰Sr) is a ubiquitous contaminant at nuclear facilities, found at high concentrations in spent nuclear fuel and radioactive waste. Due to its long half-life and ability to be transported in groundwater, an accurate method for measuring ⁹⁰Sr in water samples is critical to the monitoring program of any nuclear facility. To address this need, a rapid procedure for sequential separation of Sr/Y was developed and tested in groundwater samples collected from an area of riverbed affected by a ⁹⁰Sr groundwater plume. Sixteen samples, plus spike and water blanks, were analyzed. Five different measurements were performed to determine the ⁹⁰Sr and yttrium-90 (⁹⁰Y) activities in the samples: direct triple-to-double-coincidence ratio (TDCR) Cherenkov counting of ⁹⁰Y, liquid scintillation (LS) counting for ⁹⁰Sr following radiochemical separation, LS counting for ⁹⁰Y following radiochemical separation, Cherenkov counting for ⁹⁰Y following radiochemical separation and LS counting of the Sr samples for ⁹⁰Y in-growth. The counting was done using a low-level Hidex 300SL TDCR counter. Each measurement method was compared for accuracy, sensitivity and efficiency. The results following Cherenkov counting and radiochemical separation were in very good agreement with one another.     

The simple radiochemical determination of 90Sr in environmental solid samples by solvent extraction

Determination of ⁹⁰Sr in environmental solid samples is a challenging task because of the presence of so many other radionuclides in samples of interest. This problem was dealt with by radiochemical separation of strontium followed by yttrium separation and Cerenkov counting of the high-energy ??-particle emissions of ⁹⁰Y in order to quantitate ⁹⁰Sr. In this work, an improved method is described for the determination of ⁹⁰Sr in soil samples, through the separation of the daughter ⁹⁰Y at equilibrium. The procedure is based on the HDEHP solvent extraction in combination with liquid scintillation spectrometry (LSS). A low background Quantulus has been optimized for low level counting of Cerenkov radiation emitted by the hard ??-emitter ⁹⁰Y. The analytical quality of the method has been checked by analyzing IAEA Soil-375 reference materials. The analytical method has also been successfully applied to the determination of ⁹⁰Sr for moss-soil samples in inter-laboratory exercises through IAEA??s ALMERA network. The chemical recovery for ⁹⁰Y extraction ranged from 80 to 85% and the counting efficiency was 73% in the window 25?C400 keV.     

Determination of 90Sr in Portuguese foodstuffs

The Nuclear and Technological Institute (ITN) has the legal responsibility to carry out the environmental radiological monitoring at a national level. This survey was planned to provide relevant information on radioactivity levels in different components of the ecosystem. In what concerns the terrestrial environment the evaluation of the ⁹⁰Sr activity concentrations in foodstuffs has been performed using a method based on the separation of ⁹⁰Sr by extraction chromatography and beta determination by liquid scintillation counting (LSC) technique. The trials were carried out using 7 g of ash samples and 3 g of commercial Sr-resin (Eichrom). Validation trials were also performed using ⁹⁰Sr spiked samples. The chemical yields were determined by gravimetric method, after the addition of stable strontium to the foodstuffs. The ⁹⁰Sr activity concentrations in complete meals, meat and vegetables were determined after ⁹⁰Y ingrowths in the region 12–862 keV, using the Tri-Carb 3170 TR/SL scintillation counter in normal mode and a counting time of 120 min. The results obtained were low and of the same order of magnitude of those reported by other European countries.     

Seasonal variations of atmospheric210Pb and7Be concentrations at Kumamoto, Japan and their removal from the atmosphere as wet and dry depositions</p> </p>

Summary A relatively simple chemical separation procedure has been developed for the simultaneous determination of⁸⁹Sr and ⁹ 0Sractivities in water samples and on aerosol-filters of the Nuclear Power Plant (NPP) Paks origin. The procedure combines the cation-exchange chromatographic (Dowex 50 WX 8 resin) and solid phase extraction (EIChroM Sr.Spec?, DC18C6 crown ether) steps. The beta-radiation of radionuclides can be measured directly after the chemical separation by LSC. The activities of⁸⁹Sr,⁹⁰Sr and⁹⁰Y are calculated from an over determined set of equations using a method of constrained optimization technique. The equations are based on LSC measurements performed in three counting windows plus the⁹⁰Sr-⁹⁰Y decay law. The chemical yield of strontium is determined by ICP-AES. The lowest limits of detectable activity, for the measurement time of 600 minutes, are 30 mBq/sample and 18 mBq/sample for⁸⁹Sr and⁹⁰Sr, respectively.     

The use of liquid scintillation spectrometry for the determination of radionuclidic purity of 90Y from a radiochemical 90Y/90Srgenerator

Summary An extraction technique for the separation of ⁹⁰Sr from a high excess of⁹⁰Y has been developed. This procedure can be used for the determination of trace amounts of⁹⁰Sr in⁹⁰Y prepared by a radiochemical⁹⁰Y/⁹⁰Sr generator by liquid scintillation.     

A sensitive method based on HDEHP extraction and LSS for the determination of 90Sr in solid samples

An improved and rapid method is described for the determination of ⁹⁰Sr in environmental samples, through the separation of the daughter ⁹⁰Y at equilibrium. The procedure is based on the HDEHP solvent extraction in combination with liquid scintillation spectrometry (LSS). A low background QuantulusÔ has been optimized for low level counting of Cerenkov radiation emitted by the hard b-emitter ⁹⁰Y. The counting efficiency was 60% and the background 0.53 cpm. The reliability and reproducibility of the method have been checked using IAEA reference materials. The chemical recovery for ⁹⁰Y extraction ranges from 83 to 90%.     

Adaptation of a radioanalytical method for strontium-90 to different kinds of environmental samples and its application for the investigation of some samples in the Riyadh region

A relatively simple and rapid radioanalytical method, limited to milk, is adapted for investigating soil, biological and water samples for⁹⁰Sr. The method is based on a selective separation and successive counting of equilibrium quantities of its daughter 90Y, which can be extracted by tributyl phosphate from nitrate medium and stripped by conc. ammonia solution. 90Y is separated from possible iron and measured by Cerenkov counting. The procedure is thoroughly tested with certified reference materials and used lately for determining⁹⁰Sr in some environmental samples in the Riyadh region. The results obtained are given and discussed.     

A rapid method for the determination of strontium-90 in powdered milk

A method in which⁹⁰Y the daughter product of⁹⁰Sr decay is extracted by tributyl phosphate (TBP) from ashed powdered milk is described. The⁹⁰Y which is in equilibrium with⁹⁰Sr is back-extracted into the aqueous phase and coprecipitated with milligram amounts of ferric hydroxide. The proposed procedure makes it possible to obtain thin planar sources convenient for low level gas counters. The overall detection efficiency of 45.5% for⁹⁰Y (including chemical recovery of yttrium) was achieved. The detection limit for 200 g powdered milk samples and 10 000 s counting time was 0.065 Bq·kg^–1. The concentration of⁹⁰Sr in three-year old samples (after Chernobyl accident) ranged from 0.81 to 1.31 Bq·kg^–1.     

On a Pure Instrumental Method of 90Sr Determination in Bone Samples

An attempt is presented for the measurement of ⁹⁰Sr in real animal bone samples using gamma-ray spectrometry only with germanium detector. Gamma-ray spectra of bone samples are de-convoluted and the residue bremsstrahlung effect from ⁹⁰Sr-⁹⁰Y beta-radiation is observed. The validation of the proposed method was done by standard ⁹⁰Sr determination including radiochemical separation and liquid scintillation spectrometry (LSS). The Pearson correlation factor obtained between the activity determined by LSS and the proposed instrumental method was 0.57, with the achieved efficiency of 0.12%. Possible improvements of the method are suggested.     

The solvent extraction of carrier-free90Y from90Sr with crown ethers

A simple solvent extraction method has been developed for the separation of⁹⁰Y from⁹⁰Sr. Crown ether dissolved in chloroform was used as a selective reagent and organic picrate anion was chosen as a counter ion. The effect of various factors on the extraction separation of strontium and yttrium in the system have been studied. The extraction equilibrium constant of strontium logK _ex=9.15 was obtained from the study of the distribution coefficient versus the crown ether concentration. The separation method was simple, resulted high purity (>99.9%) and quantitative yield, and took less than half an hour.     

A new method for the carrier-free production of 90y from 90sr-90y mixture and 89sr from neutron-irradiated y2o3

The extraction of strontium(II) and yttrium(III) ions from aqueous solutions at various pH values into methyl isobutyl ketone containing I-phenyl-3-methyl-4-caprylpyrazolone-5 is described. Quantitative extraction of Sr and Y at pH 8.6–10 and pH 2.8–5.4 respectively is utilized for the carrier-free production of ⁹⁰Y from ⁹⁰Sr–⁹⁰Y mixtures and ⁸⁹Sr from neutron-irradiated yttrium oxide. A clean separation of these elements from each other and more than 95% calculated activities were recovered     

Separation and determination of <Superscript>90</Superscript>Sr in low- and intermediate-level radioactive wastes using extraction chromatography and LSC

A methodology for the determination of ⁹⁰Sr in low- and intermediate-level radioactive wastes from nuclear power plants is presented in this work. It is a part of a methodology developed for the sequential radiochemical separation of radionuclides difficult-to-measure directly by gamma spectrometry in these radioactive wastes. The separation procedure was carried out using precipitation and extraction chromatography with Sr Resin, from Eichrom and the ⁹⁰Sr was measured by liquid scintillation counting (LSC). Optimum conditions for the pretreatment, separation and LSC measurements were determined using simulated samples, which were prepared using standard solutions and carriers. The procedure showed to be rapid and achieved a good chemical yield, in the range 60–90%, and a detection limit of 6.0 × 10⁻⁴ Bq g⁻¹. The method was also tested by participation in a national intercomparison program, with aqueous samples, with good agreement of results.     

Time optimization of 90Sr determinations: sequential measurement of multiple samples during decay of 90Y

This work presents an optimized method for the determination of multiple samples containing ⁹⁰Sr when its daughter ⁹⁰Y is measured after chemical separation and in sequence, i.e. during its decay. Consequently the measurement times will increase for each subsequent sample, since there has been a longer time for decay before measurement. Compared to a previously published approach, when ⁹⁰Y is measured during its ingrowth, the gain in total analysis time (time for ingrowth+ summation of measurement times) is not that large, particularly not for low background instruments. However, results for a large part of the samples can be delivered earlier.

     

Possible overestimation of the external standard quench parameter on Wallac 1220 Quantulus™ with high energetic beta-emitters

The 1220 Quantulus is equipped with an ¹⁵²Eu external source used to determine an external standard quench parameter SQP(E). The relationship between ⁹⁰Sr/⁹⁰Y counting efficiency and SQP(E) was found linear in a defined range of SQP(E) values. This function was fixed after many counting experiences made with ⁹⁰Sr/⁹⁰Y standards. The sasme equation is used for the measurement of ⁹⁰Sr in environmental samples. The first goal of this paper is to objectify an overestimation of the SQP(E) when high energetic beta-emitters like ⁹⁰Y are present (1 to 4% in routine conditions). The second one is to show how this artefact could induce a bias in the calculation of ⁹⁰Sr activity in environmental samples. The median of this overestimation is estimated around 6%. Another approach using ⁸⁵Sr standard is suggested to avoid this overestimation. Provided the chemical composition — and thus the quenching — is similar for the two standards, the counting efficiency measured with the ⁹⁰Sr/⁹⁰Y standard could be related to the SQP(E) value of the ⁸⁵Sr standard. Indeed this one appears to be more robust regarding to the range of activity and to the counting time of the external source.     

Quinolinephosphomolybdate as ion exchanger: synthesis,characterization, and application in separation of <Superscript>90</Superscript>Y from <Superscript>90</Superscript>Sr

An inorganic ion exchanger, quinolinephosphomolybdate has been synthesized and characterized by elemental analysis, infrared (IR) and X-ray diffraction (XRD) spectroscopy. This compound is highly stable toward thermal, chemical and radiation dose. This has been employed in the separation of carrier-free ⁹⁰Y from its parent ⁹⁰Sr from an equilibrium mixture. The absorbed daughter was recovered by using 0.0284 mol L⁻¹ ascorbic acid solutions at pH 5.0 as eluting agent.     

Standardization of calibration procedures for quantification of gross alpha and gross beta activities using liquid scintillation counter

Simultaneous measurement of gross alpha and gross beta activities by liquid scintillation counting technique using LKB Wallac Quantulus 1220 liquid scintillation counter (LSC) equipped with Pulse Shape Analyzer (PSA) is described. Three sets of pure alpha and pure beta standards simulating the activity concentration values of real samples in terms of α/β activity ratios were used to calibrate the LSC. Calibration methodology for the Quantulus 1220 with respect to the above measurements using ²⁴¹Am and ⁹⁰Sr/⁹⁰Y standards of respective activity concentrations of ~25 dpm and ~10⁴ dpm is described in detail. Also highlighted the need to calibrate the LSC using another set of ²⁴¹Am and ⁹⁰Sr/⁹⁰Y standards of low and high activity concentrations respectively. The practicability and working performance of these calibration plots was checked by the validation trials with test samples spiked with ²⁴¹Am and ⁹⁰Sr/⁹⁰Y covering range of α/β activity ratios from 1:1 to 1:50.     

The separation of daughter nuclides from90Sr−90Y and140La−140Ba systems by thin-layer chromatographic methods

The separation of daughter nuclides in the carrier-free state from⁹⁰Sr?⁹⁰Y and¹⁴⁰Ba?¹⁴⁰La aqueous solution systems was performed by thin-layer chromatographic methods. (1) When a silica gel adsorbent and a developer of 1N NaCl, KCl, NH₄Cl, CaCl₂, SrCl₂ or BaCl₂ solutions was employed,⁹⁰Y and¹⁴⁰La were retained at the origin, while⁹⁰Sr and¹⁴⁰Ba advanced with the developer front. Addition of gypsum as binder to the silica gel prevented the separation of the¹⁴⁰Ba?¹⁴⁰La system, retaining both components at the origin. (2) When the¹⁴⁰Ba?¹⁴⁰La system was developed with water on a silica gel adsorbent containing 5% of gypsum, which was treated with various concentrations of nitric acid, the Rf value of¹⁴⁰La increased with the concentration of nitric acid used, reaching a maximum of 0.98 at 0.1 N. The Rf value then decreased on the further increase of the concentration of nitric acid. When the same process was applied to the⁹⁰Sr?⁹⁰Y system, there was no separation. The radiochemical purities of⁹⁰Y and¹⁴⁰La obtained in the above two ways were more than 99%.     

Validation of an extraction paper chromatography (EPC) technique for estimation of trace levels of 90Sr in 90Y solutions obtained from 90Sr/90Y generator systems

While the extraction paper chromatography (EPC) technique constitutes a novel paradigm for the determination of few Becquerels of ⁹⁰Sr in MBq quantities of ⁹⁰Y obtained from ⁹⁰Sr/⁹⁰Y generator, validation of the technique is essential to ensure its usefulness as a real time analytical tool. With a view to explore the relevance and applicability of EPC technique as a real time quality control (QC) technique for the routine estimation of ⁹⁰Sr content in generator produced ⁹⁰Y, a systematic validation study was carried out diligently not only to establish its worthiness but also to broaden its horizon. The ability of the EPC technique to separate trace amounts of Sr²⁺ in the presence of large amounts of Y³⁺ was verified. The specificity of the technique for Y³⁺ was demonstrated with ⁹⁰Y obtained by neutron irradiation. The method was validated under real experimental conditions and compared with a QC method described in US Pharmacopeia for detection of ⁹⁰Sr levels in ⁹⁰Y radiopharmaceuticals.     

Preparation of 90Y by the 90Sr-90Y Generator for Medical Purpose

The production of ⁹⁰Y by ⁹⁰Sr-⁹⁰Y generator was studied. ⁹⁰Sr was adsorbed on a column with Aminex A-5 resin. The daughter radionuclide ⁹⁰Y was eluted with 0.7M -hydroxyisobutyrate (-HIB, pH 5.4). Radionuclidic, radiochemical and chemical purities were >98% and yield >85%. After converting into chloride form ⁹⁰YCl₃-solution (pH:1) was used for preparing injectable yttrium citrate and labeling some other radiopharmaceuticals. Furthermore, a fast ITLC-method for the determination of ⁹⁰Sr in ⁹⁰Y-eluate was developed.