Assignment of Absolute Configuration of Bromoallenes by Vacuum-Ultraviolet Circular Dichroism (VUVCD)

A new application of vacuum-ultraviolet circular dichroism (VUVCD), which enables the measurement of CD spectra in the vacuum-ultraviolet region (140–200 nm), for the assignment of the absolute configurations of bromoallenes is described. Bromoallene moieties are found in natural products obtained from many marine organisms. To date, the absolute configuration of bromoallenes has been assigned almost exclusively with Lowe’s rule, which is based on specific rotation. However, exceptions to Lowe’s rule have been reported arising from the presence of other substituents with large specific rotations. For the unambiguous assignment of the absolute configuration of the bromoallene moiety with its characteristic absorption wavelength at 180–190 nm due to the π–π* transition, VUVCD was applied to four pairs of bromoallene diastereomers prepared by modifying the synthetic scheme of omaezallene. The VUVCD spectra clearly showed positive or negative Cotton effects around 180–190 nm according to the configuration of the bromoallene employed, revealing the potential of VUVCD for determining absolute stereochemistry.     

Electrolytic conductivity: a reference system for aqueous solutions

To establish a system for the measurement of electrolytic conductivity in aqueous solutions with traceability to the SI, a cell has been developed with a removable central section providing an accurate determination of the geometrical constant. As the concentration unit mass/mass, based and referred to the amount of substance in the SI, is recommended by international organisations, 0.1 molal KCl samples have been prepared and analysed. Results over a temperature range from 20 degrees C to 35 degrees C are presented. The main sources of error have been estimated and relative uncertainty has been assessed to remain at the level of 0.6%. Satisfactory agreement is observed when the results are compared with the reference values available from literature.     

ETAAS determination of nickel in serum and urine

Methods for the direct determination of Ni in human blood serum and urine by electrothermal atomic absorption spectrometry (ETAAS) are described. Hydrogen peroxide was proposed as matrix modifier, assisting thermal decomposition of proteins during the ashing step. A pyrolysis temperature of 1,200 degrees C was found to be optimal while 2,100 degrees C and 2,200 degrees C were found to be optimal atomizing temperatures for Ni in serum and urine respectively. Calibration was performed by using a calibration curve prepared with aqueous standard solutions of Ni (glycine must be used as modifier for Ni in aqueous solutions). The limits of detection, defined as the blank values plus 3 times the standard deviation of the blank values, were 0.2 microg/L for both serum and urine samples. Relative standard deviations for serum samples with concentrations of Ni in the range 0.5-2 microg/L were 10-15% and for urine samples with Ni concentrations in the range 0.5-2.5 microg/L were 8-10%.     

Rheological behavior of aqueous micellar solutions of a triblock copolymer of ethylene oxide and 1,2-butylene oxide: B10E410B10

A triblock copolymer of ethylene oxide and 1,2-butylene oxide, denoted B10E410B10, was prepared by sequential oxyanionic polymerization and characterized by 13C NMR spectroscopy and gel permeation chromatography. Micellization and the formation of micelle clusters in dilute aqueous solution, the latter a consequence of micelle bridging, was confirmed by dynamic light scattering, and average association numbers of the micelles were determined by static light scattering for T = 20-40 degrees C. The frequency dependence of the dynamic storage and loss moduli was investigated for solutions in the range of 5-20 wt %. Comparison with results for poly(oxyethylene) dialkyl ethers (10 wt %, T = 25 degrees C) indicated that the viscoelasticity of a copolymer with terminal B10 hydrophobic blocks was roughly equivalent to one with terminal C14 alkyl chains. The temperature dependence of the modulus was investigated for 15 wt % solutions at T = 5-40 degrees C. Superposition of the data led, via an Arrhenius plot, to an activation energy for the relaxation process of -40 kJ mol(-1). The negative value contrasts with the positive values found for poly(oxyethylene) dialkyl ethers and related HEUR copolymers with urethane-linked terminal alkyl chains. This difference is attributed to the block-length distribution in copolymer B10E410B10, whereby the activation energy of the relaxation process has a positive contribution from the disengagement of B blocks from micelles but a negative contribution from micellization. The negative value of the activation energy for solutions of B10E410B10 was confirmed by determining the temperature dependence of the zero-shear viscosity of its 15 wt % solution.     

Biosynthesis of silver nanoparticles by filamentous cyanobacteria from a silver(I) nitrate complex

The biosynthesis of silver nanoparticles has been successfully conducted using Plectonema boryanum UTEX 485, a filamentous cyanobacterium, reacted with aqueous AgNO3 solutions (approximately 560 mg/L Ag) at 25-100 degrees C for up to 28 days. The interaction of cyanobacteria with aqueous AgNO3 promoted the precipitation of spherical silver nanoparticles and octahedral (111) silver platelets (of up to 200 nm) in solutions. The mechanisms of silver nanoparticles via cyanobacteria could involve metabolic processes from the utilization of nitrate at 25 degrees C and also organics released from the dead cyanobacteria at 25-100 degrees C.     

A conductance sensor for dissolved sulphur dioxide using a series piezoelectric crystal device

A new piezoelectric crystal impedance sensor for the determination of sulphur dioxide in aqueous solution is presented. It is realized using a series piezoelectric crystal device which is constructed by connecting an AT-cut piezoelectric crystal to a probe in series. The probe is filled with an internal electrolyte solution that is separated from sample solutions by a gas-permeable membrane. The present sensor exhibits a favourable frequency response to 1 x 10(-7)-1 x 10(-3) M sulphur dioxide. The detection limit is 1 x 10(-8) M. The effects of the sensor preparation are considered. Dynamic range, reproducibility, response time and selectivity of the sensor are also discussed. The proposed sensor has been used successfully for lamp sulphur determinations in petroleum samples.     

A PVC plasticized sensor for Ni(II) ion based on a simple ethylenediamine derivative.

A new PVC membrane ion selective electrode which is highly selective towards Ni(II) ions was constructed using a Schiff base containing a binaphthyl moiety as the ionophore. The sensor exhibited a good Nernstian response for nickel ions over the concentration range 1.0x10(-1)-5.0x10(-6) M with a lower limit of detection of 1.3x10(-6) M. It has a fast response time and can be used for a period of 4 months with a good reproducibility. The sensor is suitable for use in aqueous solutions in a wide pH range of 3.6-7.4 and works satisfactorily in the presence of 25% (v/v) methanol or ethanol. The sensor shows high selectivity to nickel ions over a wide variety of cations. It has been successfully used as an indicator electrode in the potentiometric titration of nickel ions against EDTA and also for the direct determination of nickel content in real samples: effluent samples, chocolates and hydrogenated oils.     

Hydrogen ion-selective poly(vinyl chloride) membrane electrode based on a calix[4]arene.

A hydrogen ion-selective poly(vinyl chloride) membrane electrode was constructed using 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetracyanomethoxycalix[4]arene as a neutral carrier. The electrode showed an apparent Nernstian response in the 2-11.5 pH range with a slope of 54.0 +/- 0.2 mV/pH at 20 +/- degrees C. This electrode showed a rapid response of the emf to changes in the pH, high ion selectivity with respect to lithium, sodium and potassium, and characteristics similar to those reported for the conventional pH glass membrane electrode. It can be used as a potentiometric indicator electrode in hydrofluoric acid solutions. The effects of iodide, thiocyanate, perchlorate and bromide on the characteristics of the electrode were also considered.     

Dynamics of low temperature induced water shedding from AOT reverse micelles

The effects of low temperature and ionic strength on water encapsulated within reverse micelles were investigated by solution NMR. Reverse micelles composed of AOT and pentane and solutions with varying concentrations of NaCl were studied at temperatures ranging from 20 degrees C to -30 degrees C. One-dimensional (1)H solution NMR spectroscopy was used to monitor the quantity and structure of encapsulated water. At low temperatures, e.g., -30 degrees C, reverse micelles lose water at rates that are dependent on the ionic strength of the aqueous nanopool. The final water loading (w0 = [water]/[surfactant]) of the reverse micelles is likewise dependent on the ionic strength of the aqueous phase. Remarkably, water resonance(s) at temperatures between -20 degrees C and -30 degrees C displayed fine structure indicating the presence of multiple transient water populations. Results of this study demonstrate that reverse micelles are an excellent vehicle for studies of confined water across a broad range of conditions, including the temperature range that provides access to the supercooled state.     

Thermal diffusion forced Rayleigh scattering setup optimized for aqueous mixtures

We developed a thermal diffusion forced Rayleigh scattering (TDFRS) setup operating at a writing wavelength of 980 nm, which corresponds to an absorption band of water with an absorption coefficient of approximately 0.5 cm(-1). Therefore, aqueous mixtures require no dye to convert the light into heat energy. Especially for aqueous system with a complex phase behavior such as surfactant systems, the addition of a water soluble dye can cause artifacts. The infrared-TDFRS (IR-TDFRS) setup has been validated for water/ethanol mixtures with water weight fractions c = 0.5-0.95 and in a temperature range between T = 15 degrees C to T = 35 degrees C. Comparison with literature data shows an excellent agreement. The addition of a small amount (c(dye) approximately 10(-6) wt) of adsorbing dye at the writing wavelength allows also the investigation of organic mixtures. We investigated the three binary mixtures of dodecane, isobutylbenzene, and 1,2,3,4-tetrahydronaphthalene at a weight fraction of c = 0.5 at a temperature of 25 degrees C and found good agreement with the Soret coefficients, which had been obtained in a benchmark test under the same conditions. Therefore, the presented setup is suitable for the investigation of the thermal diffusion behavior in aqueous and organic mixtures, and in the case of aqueous systems, the addition of a dye can be avoided.     

Abrasively immobilised multiwalled carbon nanotube agglomerates: a novel electrode material approach for the analytical sensing of pH.

We demonstrate for the first time that agglomerates of multiwalled carbon nanotubes (MWCNTs) can be formed in which the binder in the agglomerate is itself a redox-active molecular solid. Two separate agglomerates were formed by dissolving 9,10-phenanthraquinone (PAQ) or 1,2-napthaquinone (NQ) in acetone together with MWCNTs and adding an excess of aqueous solution to cause precipitation of agglomerates, approximately 10 microns in dimension, which consist of bundles of nanotubes running into and throughout the amorphous molecular solid that binds the agglomerate together. The nature of this structure, when immobilised on a substrate electrode and in contact with aqueous electrolyte solutions, gives rise to many three-phase boundaries, electrolyte|agglomerate|conductor, which is advantageous to the solid-state analytical electrochemistry of such a material as it imparts a larger electroactive surface area than other modified carbon electrodes. The two agglomerates each gave a voltammetrically measurable response to changes in pH; when abrasively immobilised on a basal plane pyrolitic graphite electrode a plot of peak potential against pH produced a linear response for both MWCNT-PAQ and MWCNT-NQ agglomerates over the pH range pH 1-12 and over the temperature range 20-70 degrees C.     

Potentiometric and multinuclear NMR studies on the interaction of aluminum with ascorbic acid in acidic aqueous solution

The complex-formation equilibria between aluminum(III) ion and L-(+)-ascorbic acid (AA) in 0.1 M KCl ionic medium at 25 degrees C and 0.15 M NaCl ionic medium at 37 degrees C were studied by glass electrode pH-metric measurements. The obtained experimental results were explained by the formation of the following complexation species: a weak mononuclear 1:1 species AlL(2+) together with two trinuclear mixed-hydroxo species Al(3)H(-5)L(4) and Al(3)H(-5)L(3+) in acidic aqueous solutions. Meanwhile, the formation of the complexes and structures of Al with AA were proved by multinuclear (1H, 13C, 27Al) NMR spectra in the pH range 2.0-5.0. It is supposed that Al directly coordinates with AA at O-3 moiety; also, Al can coordinate with the O-1 and O-2 moieties of ascorbate ion through the weakly binding and the intramolecular hydrogen bonding in acidic aqueous solutions.     

Photodecarbonylation of dibenzyl ketones and trapping of radical intermediates by copper(II) chloride in frozen aqueous solutions

This paper presents a quantitative and qualitative study of the Norrish type I reaction of dibenzyl ketone (DBK) and 4-methyldibenzyl ketone (MeDBK), producing the benzyl radicals and consequently recombination products, in frozen aqueous solutions over a broad temperature range (-80 to 20 degrees C). This work extends previous research on the cage effects in various constrained media to provide information about the dynamics and reactivity of the photochemically generated intermediates at the grain boundaries of ice matrix. As the temperature of aqueous solutions decreases, the solute concentrations become high at layers covering ice crystals, causing efficient molecular segregation. The cage effect experiments have shown that diffusion of the benzyl radicals within such reaction aggregates is still remarkably efficient at temperatures below -50 degrees C, independently of the initial ketone concentration in the range of 10(-6)-10(-4) mol L(-1). In addition, the study of trapping the benzyl radicals formed in situ by CuCl2 was used as a qualitative probe of heterogeneous bimolecular reactions in the frozen aqueous matrix and on its surface. Molecules of both solutes were found to be segregated from the ice phase to the same location and underwent chemical reactions within diffusion and intermediates lifetimes limits. Understanding the fundamental physicochemical processes in ice is unquestionably important in related environmental or cosmochemical investigations.     

Structural and electronic evolution of the As(OH)3 molecule in high temperature aqueous solutions: an x-ray absorption investigation

The geometrical and electronic structure of the arsenious acid molecule As(OH)(3) in aqueous solutions has been investigated by x-ray absorption spectroscopy (XAS) within extended x-ray absorption spectroscopy (EXAFS) and x-ray absorption near edge structure (XANES), using realistic first-principle calculations in the latter case. This investigation was performed on aqueous solutions of arsenious acid from ambient to supercritical conditions (P = 250 and 600 bars, T 相似文献   

The Influence of pH and Temperature on the Equilibrium and Dynamic Surface Tension of Aqueous Solutions of Sodium Oleate

For aqueous solutions of sodium oleate, the dynamic surface tension (using the maximum bubble pressure technique) and the equilibrium surface tensions (using the du Noüy ring method) were studied. Experiments were carried out within the pH range 7 to 13 and at temperatures from 20 to 60 degrees C. From the equilibrium surface tension studies at 25 degrees C, a wide variation in surface activity was found to occur in the premicellar concentration range, depending on pH and oleate concentration, and this was explained on the basis of the formation of strongly surface-active premicellar species. It was also shown that the critical micelle concentration (cmc) of the system increased with pH within the pH range 7-12. Dynamic surface tension experiments were carried out from 20 to 60 degrees C at concentrations beyond the cmc in alkaline solutions, and the adsorption kinetics at the air/solution interface were analyzed using established theoretical diffusion models. From these data, the effective diffusion coefficients (D(eff)) for the oleate species were determined and the presence of an interfacial activation barrier in the diffusion process was confirmed. It was found that the D(eff) values obtained within the temperature range from 40 to 60 degrees C at 2-3 mM were in general agreement with previously reported values for the oleate dimer obtained by pulse-gradient FT-NMR. Furthermore, D(eff) significantly increased with temperature and also increased with concentration at higher temperatures (>40 degrees C). Copyright 2001 Academic Press.     

Ion-selective electrode for the determination of trazodone in tablets

A coated wire trazodone-selective electrode based on incorporation of trazodone-tetraphenylborate ion pair in a poly(vinylchloride) coating membrane was constructed. The influences of membrane composition, temperature, pH of the test solution, and foreign ions on the electrode performance were investigated. The electrode showed a Nernstian response over a trazodone concentration range from 1.41 x 10(-5) to 0.89 x 10(-2) M, at 25 degrees C, and was found to be very selective, precise, and usable within the pH range 2.4-9.0. The standard electrode potentials, E degree, were determined at 20, 25, 30, 35, 40 and 45 degrees C and used to calculate the isothermal temperature coefficient (dE degree/dT) of the electrode. Temperatures higher than 45 degrees C seriously affected the electrode performance. The electrode was successfully used for potentiometric determination of trazodone hydrochloride both in pure solutions and in pharmaceutical preparations.     

Tunable thermoassociation of binary guanosine gels

It is well-known that aqueous solutions of individual guanosine compounds can form gels through reversible self-assembly. Typically, gelation is favored at low temperature and acidic pH. We have discovered that binary mixtures of 5'-guanosine monophosphate (GMP) and guanosine (Guo) can form stable gels at neutral pH over a temperature range that can be tuned by varying the relative proportions of the hydrophobic Guo and the hydrophilic GMP in the mixture. Gelation was studied over the temperature range of 5-40 degrees C or 60 degrees C at pH 7.2 using visual detection, circular dichroism (CD) spectroscopy, and CD thermal melt experiments. Solutions with high GMP/Guo ratios behaved similar to solutions of GMP alone while solutions with low GMP/Guo formed firm gels across the entire temperature range. Most interesting were solutions between these two extremes, which were found to exhibit thermoassociative behavior; these solutions are liquid at refrigerator temperature and undergo sharp transitions to a gel only at higher temperatures. Increasing the GMP/Guo ratio and increasing the total concentration of guanosine compounds shifted the onset of gelation to higher temperatures (ranging from 20 to 40 degrees C), narrowed the temperature range of the gel phase, and sharpened the reversible phase transitions. The combination of self-assembly, reversibility, and tunability over biologically relevant temperature ranges and pH offers exciting possibilities for these simple and inexpensive materials in medical, biological, analytical, and nanotechnological applications.     

Ultrafast dynamics in aqueous polyacrylamide solutions.

We have investigated the ultrafast dynamics of aqueous polyacrylamide ([-CH(2)CH(CONH(2))-](n), or PAAm) solutions using femtosecond optical heterodyne-detected Raman-induced Kerr effect spectroscopy (OHD-RIKES). The observed aqueous PAAm dynamics are nearly identical for both M(w) = 1500 and 10 000. Aqueous propionamide (CH(3)CH(2)CONH(2), or PrAm) solutions were also studied, because PrAm is an exact model for the PAAm constitutional repeat unit (CRU). The longest time scale dynamics observed for both aqueous PAAm and PrAm solutions occur in the 4-10 ps range. Over the range of concentrations from 0 to 40 wt %, the picosecond reorientation time constants for the aqueous PAAm and PrAm solutions scale linearly with the solution concentration, despite the fact that the solution shear viscosities vary exponentially from 1 to 264 cP. For a given value of solution concentration in weight percent, constant ratios of measured reorientation time constants for PAAm to PrAm are obtained. This ratio of PAAm to PrAm reorientation time constants is equal to the ratio of the volume for the PAAm constitutional repeat unit (-CH(2)CHCONH(2)-) to the molecular volume of PrAm. For these reasons, we assign the polymer reorientation dynamics to motions of the entire constitutional repeat unit, not only side group motions. Simple molecular dynamics simulations of H[-CH(2)CH(CONH(2))-](7)H in a periodic box with 180 water molecules support this assignment. Amide-amide and amide-water hydrogen-bonding interactions lead to strongly oscillatory femtosecond dynamics in the Kerr transients, peaking at 80, 410, and 750 fs.     

Phospholipid bicelles that align with their normals parallel to the magnetic field

We have recently reported phospholipid bicelles (bilayered micelles) that have positive anisotropy of the magnetic susceptibility and align with their normals parallel to an external magnetic field [J. Am. Chem. Soc. 2001, 123, 1537]. Improvements have been made via the synthesis of a new phospholipid, 1-dodecanoyl-2-(4-(4-biphenyl)butanoyl)-sn-glycero-3-phosphocholine (DBBPC). Bicelles can be formed by mixing DBBPC with a short-chain phospholipid, 1,2-dihexanoyl-sn-glycero-3-phosphocholine (DHPC) in a ratio between 5.1:1 and 6.5:1 in an aqueous medium. The (31)P NMR spectra clearly show that these bicelles align with their principal axes parallel to the magnetic field within a wide temperature range. The (31)P chemical shifts indicate that the conformation of the polar headgroup in these bicelles may be different from that in common bicelles. The phase behavior of a mixture of DBBPC/DHPC with 6:1 mole ratio was investigated in the temperature range of 10-75 degrees C using (31)P, (2)H, and (23)Na NMR. At lower temperatures (10-54 degrees C), the system is dominated by the bicellar phase. At higher temperatures (54-75 degrees C), isotropic micelles are formed and coexist with the bicelles. The partial alignment of maltotriose in the DBBPC/DHPC system was studied at three temperatures, and the (1)H-(13)C dipolar coupling constants are compared with those obtained for two other bicelle solutions.     

Photo-stability of the new antiplatelet agent, KBT-3022 (ethyl 2-[4,5-bis(4-methoxyphenyl)thiazole-2-yl]pyrrol-1-ylacetate) in aqueous solutions containing acetonitrile.

The photo-stability of ethyl 2-[4,5-bis(4-methoxyphenyl)thiazole-2-yl]pyrrol-1-ylacetate, KBT-3022 in aqueous solutions containing acetonitrile was investigated under the light of a high pressure mercury lamp. Its main photo-degradation product was assumed to be ethyl 5-hydroxy-5-[4,5-bis(4-methoxyphenyl)thiazole-2-yl]-2-oxo-3-pyrrolin+ ++-1-ylacetate. KBT-3022 was also found to undergo ester hydrolysis by heat in both acidic and basic aqueous solutions, but its hydrolysis was confirmed to be negligible in the range of pH 3-9 at room temperature (25 degrees C). Further, its photo-stability with exposure to the high pressure mercury lamp was comparable to that with exposure to a fluorescent lamp. Therefore, it is considered feasible to simulate the photo-stability of KBT-3022 in aqueous solutions containing acetonitrile by exposure to all other light sources including diffuse daylight, if the cumulative number of photons of the light can be determined by actinometry.