Intense green/yellow emission in Ca8Zn(SiO4)4Cl2:Eu, Mn through energy transfer for blue-LED lighting

Eu²⁺ and Mn²⁺ co-doped Ca₈Zn(SiO₄)₄Cl₂ phosphors have been synthesized by a high temperature solid state reaction. Energy transfer from Eu²⁺ to Mn²⁺ is observed. The emission spectra of the phosphors show a green band at 505 nm of Eu²⁺ and a yellow band at 550 nm of Mn²⁺. The excitation spectra corresponding to 4f⁷-4f⁶5d transition of Eu²⁺ cover the spectral range of 370-470 nm, well matching UV and/or blue LEDs. The shortening of fluorescent lifetimes of Eu²⁺ followed by simultaneous increase of fluorescent intensity of Mn²⁺ with increasing Mn²⁺ concentrations is studied based on energy transfer. Upon blue light excitation the present phosphor can emit intense green/yellow in comparison with other chlorosilicate phosphors such as Eu²⁺ and Mn²⁺ co-doped Ca₈Mg(SiO₄)₄Cl₂ and Ca₃SiO₄Cl₂, demonstrating a potential application in phosphor converted white LEDs.     

Combustion synthesis and luminescent properties of a new material Li2(Ba0.99,Eu0.01)SiO4:B for ultraviolet light emitting diodes

Using urea as fuel and boric as flux, a novel bluish green emitting phosphor Li₂(Ba_0.99,Eu_0.01)SiO₄:B³⁺ has been successfully synthesized using a combustion method. The material has potential application as the fluorescent material for ultraviolet light-emitting diodes (UV-LEDs). The dependence of the properties of Li₂(Ba_0.99,Eu_0.01)SiO₄:B³⁺ phosphors upon urea concentration, boric acid doping and initiating combustion temperature were investigated. The crystallization and particle sizes of Li₂(Ba_0.99,Eu_0.01)SiO₄:B³⁺ have been investigated by using powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). Luminescence measurements showed that the phosphors can be efficiently excited by ultraviolet (UV) to visible region, emitting a bluish green light with peak wavelength of 490 nm. The results showed that the boric acid was effective in improving the luminescence intensity of Li₂(Ba_0.99,Eu_0.01)SiO₄ and the optimum molar ratio of boric acid to barium nitrate was about 0.06. The optimized phosphors Li₂(Ba_0.99,Eu_0.01)SiO₄:B_0.06³⁺ showed 160% improved emission intensity compared with that of the Li₂(Ba_0.99,Eu_0.01)SiO₄ phosphors under UV (λ_ex=350 nm) excitation.     

Luminescence characteristics of Eu2+ activated Ca2SiO4 Sr2SiO4 and Ba2SiO4 phosphorsfor white LEDs

<正>This paper investigates the luminescence characteristics of Eu²⁺ activated Ca₂SiO₄,Sr₂SiO₄ and Ba₂SiO₄ phosphors. Two emission bands are assigned to the f-d transitions of Eu²⁺ ions doped into two different cation sites in host lattices,and show different emission colour variation caused by substituting M²⁺ cations for smaller cations.This behaviour is discussed in terms of two competing factors of the crystal field strength and covalence.These phosphors with maximum excitation of around 370 nm can be applied as a colour-tunable phosphor for light-emitting diodes（LEDs） based on ultraviolet chip/phosphor technology.     

White light-emitting Mg0.1Sr1.9SiO4:Eu phosphors

Divalent europium-activated strontium orthosilicate Sr₂SiO₄:Eu²⁺ and Mg_0.1Sr_1.9SiO₄:Eu²⁺ phosphors were synthesized through the solid-state reaction technique. Their luminescent properties under ultraviolet excitation were investigated. The X-ray diffraction (XRD) results show that these phosphors are of α′-Sr₂SiO₄ phase with a trace of β-Sr₂SiO₄. Doping of Eu²⁺ ion into the crystal lattice results in the lattice constant being expended, while Mg²⁺ makes the lattice constant shrinking. A solid solution with the same crystal structure is formed when Eu²⁺ or Mg²⁺ substitutes part of Sr²⁺ ions and occupies the same lattice sites. The Sr₂SiO₄:Eu²⁺ phosphors show two emission spectra peaked at 535 and 473 nm originated from the 5d-4f transition of Eu²⁺ ion doped in two different Sr²⁺ sites in the host lattice. By substitution of 0.1 mol of Sr²⁺ with Mg²⁺, these two emission bands are tuned to be in the blue and yellow region (459 and 564 nm for Mg_0.1Sr_1.88SiO₄:Eu_0.02), respectively. The tuning effect is discussed. With a combination of the blue and yellow emission bands the phosphors show white color, indicating that these phosphors may become promising phosphor candidates for white light-emitting diodes (LEDs).     

A potential red-emitting phosphor CaSrAl2SiO7:Eu for near-ultraviolet light-emitting diodes

A novel red-emitting phosphor CaSrAl₂SiO₇:Eu³⁺ was firstly synthesized through the high temperature solid state reaction at 1300 °C. The structure, diffuse reflection spectra, photoluminescence spectra, color-coordinate parameters and quantum efficiencies (QE) of phosphors were investigated. The obtained CaSrAl₂SiO₇:Eu³⁺ phosphors have the same structure with that of the Ca₂Al₂SiO₇ and Sr₂Al₂SiO₇ phosphor, which have the melilite structure. Optical properties were studied as a function of Eu³⁺ concentration x, when x>0.14, the intensity of absorption of the f–f transitions of Eu³⁺ at 393 nm is stronger than that of the broad charge transfer transition band (CTB) around 254 nm, and which matches well with the output lights of NUV–LEDs, whereas, the concentration of Eu³⁺x≤0.14, the absorption of 393 nm is weaker than that of CTB. The underlying reason of Eu³⁺ concentration on their luminescent properties was investigated and discussed in detail. As a result, comparing with the commercial red phosphor Y₂O₂S:Eu³⁺, the CaSrAl₂SiO₇:xEu³⁺ (x>0.14) phosphor exhibited excellent color purity and much higher brightness and could be considered as promising red phosphors for NUV–LEDs.     

Improved luminescent properties of red-emitting Ca0.54Sr0.16Eu0.08Gd0.12(MoO4)0.2(WO4)0.8 phosphor for LED application by charge compensation

The red-emitting Ca_0.54Sr_0.16Eu_0.08Gd_0.12(MoO₄)_0.2(WO₄)_0.8 phosphor is improved in the emission charateristics by charge compensation, of which chromaticity coordinates (CIE) are x=0.66 and y=0.33. Three approaches to charge compensation are investigated, namely (a) 3Ca²⁺/Sr²⁺→2Eu³⁺/Gd³⁺+vacancy, (b) 2Ca²⁺/Sr²⁺→Eu³⁺/Gd³⁺+M⁺(M⁺ is a monovalent cation like Li⁺, Na⁺ and K⁺ employed as a charge compensator) and (c) Ca²⁺/Sr²⁺→Eu³⁺/Gd³⁺+N⁻ (N⁻ is a monovalent anion like F⁻, Cl⁻, Br⁻ and I⁻ employed as charge compensation ions). Through photoluminescent spectra analyzing the radiative and non-radiative relaxation mechanisms of luminescent system are obtained. Under 20 mA forward-bias current, one red-emitting LED is made by combining 390-405 nm-emitting LED chip and the phosphor. The red-emitting phosphor has broad prospects in LED application field.     

Luminescent properties of R doped Sr2SiO4:Eu(R=Li, Na and K) red-emitting phosphors for white LEDs

Sr₂SiO₄:Eu³⁺ and Sr₂SiO₄:Eu³⁺ doped with R⁺(R⁺=Li⁺, Na⁺ and K⁺) phosphors were prepared by conventional solid-state reaction and investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and photoluminescence spectroscopy. XRD patterns and SEM reveal that the optimal firing condition for Sr₂SiO₄:Eu³⁺ was 1300 °C for 4 h. The excitation and emission spectra indicate that the phosphor can be effectively excited by ultraviolet (395 nm) and blue (466 nm) light and emits intense red light peaked at around 614 nm corresponding to the ⁵D₀→⁷F₂ transitions of Eu³⁺. In the research work, the effect of R⁺ contents on luminescence property and the Eu³⁺ concentration quenching process have also been investigated. The Eu³⁺ concentration quenching mechanism was verified to be a multipole-multipole interaction and the critical energy-transfer distance was calculated to be around 14.6 Å. The dopant R⁺(R⁺=Li⁺, Na⁺ and K⁺) as charge compensator in Sr₂SiO₄:Eu³⁺ can further enhance luminescence intensity, and the emission intensity of Sr₂SiO₄:Eu³⁺ doping Li⁺ is higher than that of Na⁺ or K⁺.     

Enhanced photoluminescence properties of Zn2SiO4:Mn co-activated with Y/Li under VUV excitation

A series of green phosphors Zn_1.92−2xY_xLi_xSiO₄:0.08Mn²⁺ (0≤x≤0.03) were prepared by solid-state synthesis method. Phase and lattice parameters of the synthesized phosphors were characterized by powder X-ray diffractometer (XRD) and the co-doped effects of Y³⁺/Li⁺ upon emission intensity and decay time were investigated under 147 nm excitation. The results indicate that the co-doping of Y³⁺/Li⁺ has favorable influence on the photoluminescence properties of Zn₂SiO₄:Mn²⁺, and the optimal photoluminescence intensity of Zn_1.90Y_0.01Li_0.01SiO₄:0.08Mn²⁺ is 103% of that of commercial phosphor when the doping concentration of Y³⁺/Li⁺ is 0.01 mol. Additionally, the decay time of phosphor is much shortened and the decay time of Zn_1.90Y_0.01Li_0.01SiO₄:0.08Mn²⁺ is 3.39 ms, shorter by 1.83 ms than that of commercial product after Y³⁺/Li⁺ co-doping.     

Photoluminescence of double-color-emitting phosphor Ca5(PO4)3Cl:Eu, Mn for near-UV LED

Eu²⁺ activated Ca₅(PO₄)₃Cl blue-emitting phosphors were prepared by the conventional solid state method using CaCl₂ as the chlorine source and H₃BO₃ as flux. The structure and luminescent properties of phosphors depend on the concentrations of Eu²⁺, the amount of CaCl₂ and the usage of the H₃BO₃ flux were investigated systematically. Eu²⁺ and Mn²⁺ Co-doped Ca₅(PO₄)₃Cl with blue and orange double-band emissions were also researched based on the optimal composition and synthesis conditions. The energy transfer between Eu²⁺ and Mn²⁺ was found in the phosphor Ca₅(PO₄)₃Cl:Eu²⁺, Mn²⁺, and the Co-doped phosphor can be efficiently excited by near-UV light, indicating that the phoshor is a potentional candidate for n-UV LED used phosphor.     

White light emitting from single phased K2Ca1−x−yP2O7: xEu, yMn phosphors under UV excitation

A single phased white light emitting phosphors K₂Ca_1−x−yP₂O₇: xEu²⁺, yMn²⁺ were synthesized by solid state reaction method. The Effective energy transfer occurs in this phosphor due to the large spectral overlap between the emission of Eu²⁺ and the excitation of Mn²⁺. The emission hue of K₂Ca_1−x−yP₂O₇: xEu²⁺, yMn²⁺ from blue to white light can be obtained by tuning the Eu²⁺/Mn²⁺ content ratio. The energy transfer mechanism from Eu²⁺ to Mn²⁺ in this phosphor was carefully investigated and demonstrated to be via the dipole–quadrupole interaction.     

用于白光LED的单一基质白光荧光粉Ca2SiO3Cl2:Eu2+，Mn2+的发光性质

用高温固相法合成了Eu²⁺，Mn²⁺共激活的Ca₂SiO₃Cl₂高亮度白色发光材料，并对其发光性质进行了研究. 该荧光粉在近紫外光激发下发出强的白色荧光，Eu^{2+中心形成峰值为419 nm和498 nm的特征宽带，通过Eu2+中心向Mn2+中心的能量传递导致了峰值为578 nm的发射，三个谱带叠加从而在单一基质中得到了白光. 激发光谱均分布在250—415 nm的波长范围，红绿蓝三个发射带的激发谱峰值分别位于385 nm，412 nm，370 nm和396 nm处，可以被InGaN管芯产生的紫外辐射有效激发. Ca₂SiO₃Cl₂:Eu2+，Mn2+是一种很有前途的单一基质白光LED荧光粉.}     

White-light generation through Ce3+/Mn2+-codoped and Eu2+-doped Ba1.2Ca0.8SiO4 T-phase phosphors

Hexagonal Ba_1.20Ca_0.8?2x?ySiO₄:xCe³⁺,xLi⁺,yMn²⁺ phosphors exhibit two emission bands peaking near 400 and 600 nm from the allowed f–d transition of Ce³⁺ ions and the forbidden ⁴T₁–⁶A₁ transition of Mn²⁺ ions, respectively. The strong interaction between Ce³⁺/Mn²⁺ ions is investigated in terms of energy transfer, crystal field effect, and microstructure by varying their concentrations. They show a higher quenching temperature of 250 °C than that of a commercially used (Ba,Sr)₂SiO₄:Eu²⁺ phosphor (150 °C). Finally, mixtures of these phosphors with green-emissive Ba_1.20Ca_0.70SiO₄:0.10Eu²⁺ are tested and yielded correlated color temperatures from 3500 to 7000 K, and color rendering indices up to 95%.     

Luminescent properties of Sr5(PO4)3 Cl:Eu2+, Mn2+ as?a?potential phosphor for UV-LED-based white LEDs

Eu²⁺ and Mn²⁺ co-activated Sr₅(PO₄)₃Cl phosphors with blue and orange color double emission bands, under a broad-band excitation wavelength range of 340–400 nm, were synthesized by the solid-state reaction. It was found that the processing parameters, including the fluxes, annealing time and activators concentrations, affect the emission intensity and other luminescent properties. Energy transfer between Eu²⁺ and Mn²⁺ was discovered and the transfer efficiency was also estimated based on relative intensities of Eu²⁺ and Mn²⁺ emission. Thus the relative strength of blue and orange emission intensities could be tuned by varying the relative concentration of Eu²⁺ and Mn²⁺. Since the photoluminescence excitation spectra of the newly developed Sr₅(PO₄)₃Cl:Eu²⁺, Mn²⁺ phosphors exhibit a strong absorption in the range of 340–400 nm, they are promising for producing UV-LED-based white LEDs.     

Temperature-dependent emission spectra of M2SiO4:Eu (M=Ca, Sr, Ba) phosphors for green and greenish white LEDs

The temperature dependence of emission spectra of alkaline earth ortho-silicates M₂SiO₄ (M=Ca, Sr, Ba) doped with Eu²⁺ ions is investigated. Two emission bands of Sr₂SiO₄:Eu²⁺ show the normal redshift with broadening bandwidth and decreasing emission intensity as an increase in temperature. On the other hand, emission bands of Ca₂SiO₄:Eu²⁺ and Ba₂SiO₄:Eu²⁺ show the anomalous blueshift with increasing temperature. For Ca₂SiO₄:Eu²⁺ and Ba₂SiO₄:Eu²⁺, the temperature dependence of the emission color can be described in terms of back tunneling from the excited state of low-energy emission band to the excited state of high-energy emission band in the configuration coordinate diagram. Our phosphors have a promising potential as phosphors for green or greenish white-light-emitting diode pumped by ultraviolet chip.     

A potential green-emitting phosphor Ca8Mg(SiO4)4Cl2:Eu for white light emitting diodes prepared by sol-gel method

A potential green emitting phosphor Ca₈Mg(SiO₄)₄Cl₂:Eu²⁺ was prepared by modified sol-gel method. The factors those affect the photoluminescence intensity including heating temperature, the usage of the chlorine source CaCl₂ and the concentration of dopant Eu²⁺ were also investigated in detail. As comparison, the phosphor prepared by solid-state reaction was also prepared. The phosphors show intense absorption in the range of 375-450 nm, which makes it a potential candidate of green emitting phosphor used for near-UV or blue light excited white LEDs.     

Tunable bluish green to yellowish green Ca<Subscript>2(1-x)</Subscript>Sr<Subscript>2x</Subscript>Al<Subscript>2</Subscript>SiO<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript> phosphors for potential LED application

A series of solid solutions with a general formula of Ca_2(1-x)Sr_2xAl₂SiO₇:Eu²⁺ were synthesized by a high temperature solid state reaction. The structure, diffuse reflection spectra, photoluminescence spectra, color-coordinate parameters and lifetimes of phosphors were investigated. XRD results show that Ca₂Al₂SiO₇ is totally miscible with Sr₂Al₂SiO₇. These solid solution phosphors show a broad excitation band of 350–450 nm that matches well with the output lights of near-UV LEDs and tunable emission from bluish green to yellowish green. These optical properties originate from the 4f⁷–4f⁶5d transition of Eu²⁺ ions. The crystal field strength was considered to be tailed by controlling the host composition, which leads to the shift of absorption band and emission band, and the varying of color coordinates. PACS  78.55.-m; 42.70.-a; 61.05.C-     

Influence of Ba-doping on structural and luminescence properties of Sr2SiO4:Eu phosphors

Ba²⁺-doped Sr₂SiO₄:Eu²⁺ phosphors were synthesized with the high-temperature solid-state reaction technique. The experimental results, summarized in the successful production of a single-phase powder with fine microstructure of spherical particles with smooth surface, suggest that Ba²⁺-doping favors the stabilization of α′-Sr₂SiO₄. Rietveld refinement of X-ray diffractograms suggests that Ba²⁺ and Eu²⁺ ions occupy the sites of Sr²⁺ in the lattice of α′-Sr₂SiO₄. The produced phosphors show two intense emission bands at green and yellow regions of spectrum, originated from Eu²⁺ ions accommodated at two different sites in the host crystal, whose peaks depend on the concentrations of Ba²⁺ and Eu²⁺. Intense and broad excitation spectra extend from ultraviolet to the blue region.     

Synthesis and luminescence properties of Eu, Ce and Tb-activated Sr3La2(BO3)4 under UV excitation

The spectroscopic properties in UV-excitable range for the phosphors of Sr₃La₂(BO₃)₄:RE³⁺ (RE³⁺=Eu³⁺, Ce³⁺, Tb³⁺) were investigated. The phosphors were synthesized by conventional solid-state reactions. The photoluminescence (PL) spectra and commission international de I'Eclairage (CIE) coordinates of Sr₃La₂(BO₃)₄:RE³⁺ were investigated. The f-d transitions of Eu³⁺, Ce³⁺ and Tb³⁺ in the host lattices are assumed and corroborated. The PL and PL excitation (PLE) spectra indicate that the main emission wavelength of Sr₃La₂(BO₃)₄:Eu³⁺ is 611 nm, and Sr₃La₂(BO₃)₄:Ce³⁺ shows dominating emission peak at 425 nm, while Sr₃La₂(BO₃)₄:Tb³⁺ displays green emission at 487, 542, 582 and 620 nm. These phosphors were prepared by simple solid-state reaction at 1000 °C. There are lower reactive temperature and more convenient than commercial phosphors. The Sr₃La₂(BO₃)₄:Tb³⁺ applied to cold cathode fluorescent lamp was found to emit green light and have a major peak wavelength at around 542 nm. These phosphors may provide a new kind of luminescent materials under ultraviolet excitation.     

Sr2CeO4:Eu and Sr2CeO4:5 mol% Eu, 3 mol% Dy microphosphors: Wet chemistry synthesis from hybrid precursor and photoluminescence properties

In this article, Sr₂CeO₄:x mol% Eu³⁺ and Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors were synthesized from assembling hybrid precursors by wet chemical method. As-prepared samples present uniform grain-like morphology and the particle size is about 0.2 μm. The luminescence spectra of Sr₂CeO₄:x mol% Eu³⁺ have been measured to examine the influence of the intensity of red emission lines for Eu³⁺ on the concentration of Eu³⁺, showing that the intensity of the red emission increases with an increase of the concentration from 1 to 5 mol%. Additionally, from the emission spectra of Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors, the characteristic lines of Dy³⁺ have also been observed. This result indicates that there also exists an energy transfer process between Sr₂CeO₄ and Dy³⁺.     

Enhanced luminescence from spontaneously ordered Gd2O3:Eu based nanostructures

Nanostructured Gd₂O₃:Eu³⁺ and Li⁺ doped Gd₂O₃:Eu³⁺ thin films were prepared by pulsed laser ablation technique. The effects of annealing and Li⁺ doping on the structural, morphological, optical and luminescent properties are discussed. X-ray diffraction and Micro-Raman investigations indicate a phase transformation from amorphous to nanocrystalline phase and an early crystallization was observed in Li⁺ doped Gd₂O₃:Eu³⁺ thin films on annealing. AFM images of Li⁺ doped Gd₂O₃:Eu³⁺ films annealed at different temperatures especially at 973 K show a spontaneous ordering of the nanocrystals distributed uniformly all over the surface, with a hillocks (or tips) like self-assembly of nanoparticles driven by thermodynamic and kinetic considerations. Enhanced photoemission from locations corresponding to the tips suggest their use in high resolution display devices. An investigation on the photoluminescence of Gd_2−xEu_xO₃ (x=0.10) and Gd_2−x−yEu_xLi_yO₃ (x=0.10, y=0.08) thin films annealed at 973 K reveals that the enhancement in luminescence intensity of about 3.04 times on Li⁺ doping is solely due to the increase in oxygen vacancies and the flux effect of Li⁺ ions. The observed decrease in the values of asymmetric ratio from the luminescence spectra of Li⁺ doped Gd₂O₃:Eu³⁺ films at high temperature region is discussed in terms of increased EuO bond length as a result of Li⁺ doping.