A new ion-selective electrode for nitrate determination

Summary A new ion-selective electrode which can be used for the nitrate determination in a concentration range of 10^–1 to 10^–4 mol/l is described. The polymer ion-exchanger membrane is formed by an epoxy resin, after Nitron nitrate having been introduced serving as an anchor group. The selectivity constants k _t-i have been determined for Cl^–, ClO ₄ ^– , HCO ₃ ^– , SO ₄ ^2– , HPO ₄ ^2– , MoO ₄ ^2– and WO ₄ ^2– .

---

Neue ionenselektive Elektrode für die Nitratbestimmung

Zusammenfassung Es wird eine neue ionenselektive Elektrode beschrieben, die für Nitratbestimmungen im Konzentrationsbereich von 10^–1 bis 10^–4 mol/l verwendet werden kann. Die Ionenaustauschermembran besteht aus Epoxidharz, in das Nitronnitrat als Ankergruppe eingeführt wurde. Die Selektivitätskonstanten K _T-I für Cl^–, ClO ₄ ^– , HCO ₃ ^– , SO ₄ ^2– , HPO ₄ ^2– , MoO ₄ ^2– und WO ₄ ^2– wurden bestimmt.

---

---

Dedicated to Prof. Dr. H. Monien on the occasion of his 60th birthday     

The solubility of CaMoO4(c) and an aqueous thermodynamic model for Ca2+-MoO 4 2 -ion-interactions

The solubility of powellite [CaMoO₄(c)] was studied in aqueous Na₂MoO₄, CaCl₂ and Ca(NO₃)₂ solutions ranging in concentrations from 1×10^–4M to 1.0M and over equilibration times extending to 36 days. Our experimental data were interpreted using the aqueous ion-interaction model of Pitzer and coworkers. The Ca²⁺–MoO ₄ ^2– ion-interactions were found to be analogous to Ca²⁺–SO ₄ ^2– . The use of Ca²⁺–MoO ₄ ^2– ion-interactions parameters (⁽⁰⁾=0.2, ⁽¹⁾ = 3.1973 and ⁽²⁾) and a logK _sp of –7.93 gave excellent predictions of all of the experimental data. Commonion ternary interaction parameters such as MoO ₄ ^2– –Cl^– or MoO ₄ ^2– –NO ₃ ^– were not required.     

Indikation der Sulfat-F?llungstitration mit adsorptionspolarisierten Elektroden

Summary The indication of the sulphate precipitation-titration using adsorption-polarized electrodes (APE) has been maximized. Large differences in quality of the two electrode surfaces produce broad signals. Suitable preparation of the electrode leads to less defective surfaces. Sharp signals result when the platinum black is electrodeposited at 1.4 V followed by oxidation under the same conditions. Addition of lead-, copper- and mercury-salts to the plating solution increases the surface of the deposits, whereas deposits containing Fe are smoother and lead to sharp peaks.Adsorption as well as coprecipitation of oxoanions cause interference. SeO ₄ ^2– and VO ₃ ^– does not interfere with the determination up to a molar ratio of sulphate to oxoanion of 7.51 and 51 resp., whereas a molar ratio up to 25:1 of CrO ₄ ^2– , MoO ₄ ^2– , WO ₄ ^2– and AsO ₃ sulphate can be tolerated. The influence of IOO ₄ ^2– is negligible. Furthermore, the determination of MoO ₄ ^2– and WO ₄ ^2– was found to be possible by titration using APE-indication.     

Monodentate substitution reactions of [MO2(CN)4]n− type complexes: The crystal structure of the sodium thiocyanate adduct of tetramethylammonium tetracyanooxothiocyanatotungstate(IV)

The crystal structure of (Me₄N)₃[WO(CN)₄(NCS)]·NaNCS was determined from three-dimensional x-ray diffraction data. The dark blue crystals are monoclinic, space group C2/m, with cell dimensions a=13.105(4), b=12.688(2), c=18.871(3) Å, =100.4(8)°, z=4 and D=1.46 g cm^–3. Anisotropic refinement of 1333 observed reflections converged to R=0.068. The [WO(CN)₄(NCS)]^3– ion is a distorted octahedron with the tungsten atom displaced by 0.35 Å out of the plane formed by the four cyano ligands, towards the oxo ligand. The coordinated thiocyanate ligand is bonded to the tungsten atomvia the nitrogen atomtrans to the oxo ligand. Bond distances found: W–CN_av=2.14(3), W–O=1.61(2) and W–NCS=2.23(2) Å. The compound crystallizes as an adduct with an additional thiocyanate anion, ionically bonded to a severely disordered sodium cation. The results correlate with available data from similar complexes.     

Kinetics of the Catalytic Oxidation Reactions of Thiol Compounds in Aqueous Solutions in the Presence of Copper Ions

The kinetics of the catalytic oxidation reactions of thiol compounds with molecular oxygen in aqueous solutions in the presence of copper ions was studied in relation to the structures of oxidized thiols and the pH of the solution. A modified procedure used for the determination of [O₂] allowed us to obtain the kinetic characteristics of more than 30 thiols over a wide pH range. We found that weakly chelating thiols exhibited a first order of reaction with respect to [Cu⁺] and [O₂] under conditions when the [(Cu⁺)(RS^–)₂] complex occurred. In the oxidation of strongly chelating thiols in an alkaline medium, the order of reaction with respect to [Cu⁺] was equal to 2, and the rate of reaction was independent of [O₂]. We found that the introduction of small amounts of strongly chelating thiols into Cu⁺ solutions containing difficult-to-oxidize mercaptans resulted in a dramatic acceleration of mercaptan oxidation. We hypothesized that O₂ was effectively bound to the [(Cu⁺)(RS^–)₂] complexes in an alkaline medium in the case of strongly chelating thiols, and this was not the case with the complexes of weakly chelating thiols.     

Anion exchangers functionalized by chelating reagents (AnChel) for preconcentration of trace elements: Capabilities and limitations

Summary Conventional anion exchangers (e.g., Adsorbex SAX, Amberlite IRA 410, Dowex 1X8, Lewatit MP 5080, TEAE cellulose) functionalized by means of sulfonated metal reagents (e.g., Arsenazo III, Eriochrome Red B, 8-hydroxyquinoline-5-sulfonic acid, Tiron and others) were investigated as collectors (AnChel) for analytical preconcentration of trace elements. In particular, the stability of AnChel strongly depending on competing anions, on the anion exchanger and on the metal reagent chosen, was characterized. Accordingly, for appropriate combinations of AnChel (e.g., Dowex 1X8/Arsenazo III) reagent distribution coefficients K_d in the range 10⁴ to 10⁵ (ml/g) could be attained on polystyrene-based anion exchangers even in concentrated salt solutions (e.g., 4 mol/l NaCl), but not on hydrophilic exchangers (e.g., SAX, TEAE cellulose). In general, the stability of AnChel against competing anions followed the order Cl^–>SO ₄ ^2– >NO ₃ ^– >ClO ₄ ^– . Reagent loadings of about 1 mmol/g (e.g., 8-hydroxyquinoline S) on the anion exchangers were obtainable. Trace metals precomplexed with the reagents cited could be separated (>90%) within 5 min and remobilized by acid (e.g. 2 mol/l HNO₃) within some 10 s (batch procedure). Using small columns filled with anion exchanger (e.g., 0.25 g Dowex 1X8) fast trace-matrix separations were carried out with 8-hydroxyquinoline S (Cu, Fe, In, Mn, Pb, Zn) in MgCl₂ solutions and with Arsenazo III (U, Th) in AlCl₃ solution, respectively. For subsequent trace determinations the flame-AAS (injection technique) was applied, except for Th and U [quantified by total reflection X-ray fluorescence (TXRF)].     

The character of interaction of organometallic derivatives of 4-nitrophenol and 4-nitrothiophenol with anions in different media

Interaction of R _n M-derivatives of 4-nitrophenol and thiophenol (R _n M= PhHG, PPh₃Au, Ph₃Sn, Ph₄Sb) with a set of inorganic and organic anions (Cl^–, Br^–, I^–, CN^–, [PhOCO]^–, [4-NO₂C₆H₄OCO]^–) was studied by IR and electronic spectroscopy in solvents with different polarities and coordinating properties (C₆H₆, CH₂Cl₂, DMSO). The dependence of the character of the interaction with the anions on the nature of the metal atom and heteroatom, the type of anions and the nature of the media was analyzed. Such interaction leads to ion-molecular complexes, and also to dissociation of the X-M bond (X = O, S, M = Au, Hg. Sb) with formation of the (4-NO₂C₆H₄X)^– anion even in weakly polar media. Only in the case of 4-NO₂C₆H₄OSnPh₃ does the reaction stop at the stage of complex formation. In other cases the role of complex formation with anions is less than with neutral coordinating reagents.Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 7, pp. 1838–1841, July, 1996.     

F?llungstitrimetrische Bestimmung von Esterchelatanionen mit Tensidkationen. Amperometrische und voltametrische Endpunktsanzeige

Zusammenfassung Die fällungstitrimetrische Bestimmung von Brenzcatechinatochelatanionen des MoO ₄ ^2– , WO ₄ ^2– und VO ₃ ^2–/s- mit R₄N⁺¹ wird untersucht. Zur Aufklärung des Indikationsmechanismus werden auch vergleichende Untersuchungen mit substituiertem Brenzcatechin und mit Zusatz aprotischer Lösungsmittel beschrieben.Die Indikation erfolgt durch Oxidation von adsorbiertem Komplex vor dem Endpunkt bzw. von überschüssigem Ligand nach dem Endpunkt. Der Endpunkt selbst wird durch ein Maximum bzw. durch einen Sprung angezeigt. Dieser einfache Mechanismus wird durch verschiedene Adsorptionsgleichgewichte beeinflußt. Alle drei untersuchten Übergangsmetalle lassen sich nach der beschriebenen Methode nachweisempfindlich und genau bestimmen. Eediglich VO ₃ ^– macht eine Ausnahme, indem es als einfach geladenes Esterchelatanion zur Dimerisierung neigt und die Anodenoberfläche blockiert: Die Eichfunktion verläuft hier schon bei kleinen Konzentrationen in Form einer Sättigungskurve. Die Standardabweichung für die fällungstitrimetrische Bestimmung der zweiwertigen Esterchelatanionen beträgt dagegen bei 0,1 mmol erst etwa 1% rel.

---

Precipitation titration of esterchelate-anions using tenside cations. Amperometric and voltametric indication

Summary The precipitation-titrimetric determination of catechol-chelate anions of MoO ₄ ^2– , WO ₄ ^2– and VO ₃ ^2–/s- by R₄N^{+ 1} is examined. The mechanism of the amperometric resp. voltametric indication is elucidated by comparative examinations using substituted catechols and adding aprotic solvents to the test solutions.Indication is achieved by oxidation of the adsorbed complex prior to reaching the endpoint and by oxidation of ligand excess after having passed the endpoint. Thus, the indication signal is a maximum (catechol) resp. a break (4-nitrocatechol). This simple mechanism is superimposed by several adsorption equilibria. All transition metals under examination may be determined very sensitively and accurately by the method presented with the exception of VO ₃ ^– which because of the monovalency of its complex tends towards dimerisation and blockage of the electrodes' surfaces. In this case, the calibration plot shows saturation already at a low concentration. In contrast, the divalent esterchelate anions have a linear calibration curve and can be determined down to a level of 5×10^–3 mmols. The standard deviation is about 1% rel. at 0.1 mmol.

     

Kinetic study of the reaction betweentrans-tetracyanodioxomolybdate(IV) and fluoride ions

Summary The kinetics of the reaction between [MoO₂(CN)₄]^4– and F^– have been studied in the pH range 8 to 11. The results indicated that the diprotonated form, [MoO(OH₂)(CN)₄]^2–, is the only reactive species and that the aqua-ligand is substituted by the F^– ion according to the following reaction. The k₁ and k_–1 values are 8.8(2) M^–1 s^–1 and 0.6(1)s^–1, respectively, at 15°C. A dissociative substitution process is proposed.     

Ion exchange studies of U(VI) from aqueous Arsenazo-III solutions using AG-2X8, Dowex-50WX8 and Chelex-100 resins

The distribution of U(VI) between the anion exchanger AG-2X8, the cation exchanger Dowex-50WX8 and the chelating resin Chelex-100 and aqueous solutions of Arsenazo-III at different pH values was studied. The concentration of Arsenazo-III was in the range of 1.53·10^–4–1.23·10^–3M. Equilibrium pH was varied from 1.0 to 8.78 while U(VI) original concentration was held constant at 3.39·10^–4M. The effect of Arsenazo-III concentration and the variation of hydrogen ion concentration on U(VI) species formed in solution as well as the sorbed species was discussed. Use was made of IR spectroscopy to investigate the sorption behavior. The sorption of some interfering ions such as Th(IV), Zr(IV) and Ce(III) on the resins used at optimum conditions for the sorption of U(VI) was also investigated.     

Extraction of tungsten and rhenium by basic or neutral extractants in xylene from mineral acidic media

Extraction of WO ₄ ^2– and ReO ₄ ^– by Adogen-381, tricaprylmethylammonium chloride, Hyamine 10-X, trioctylphosphine oxide or dibenzylsulphoxide in xylene from HNO₃, HCl or H₂SO₄ acid medium was investigated. Based on the separation factors obtained, the separation of ReO ₄ ^– from WO ₄ ^2– was elucidated. ReO ₄ ^– was separated from WO ₄ ^2– in high radiochemical purity: >99.9% by three successive extractions and strippings using Adogen-381 from HCl or HNO₃ acid medium.     

Complex compounds of tetracycline with WO 4 2− and MoO 4 2− ions. Investigation by pH-metric and conductometric methods

By using pH-metric and conductometric methods it has been found that tetracycline (H₃TC) forms with WO ₄ ^2– and MoO ₄ ^2– ions the following complex compounds: [WO₃HTC]^2–, [WO₃(H₂TC)₂]^2– and [MoO₃(H₂TC)₂]^2–. Stability constants log/gb ₁ ^k =7.86 and log ₁ ^k =7.80 for [WO₃HTC]^2– and [MoO₃HTC]^2–, respectively, have been calculated from pH-metric measurements.     

An aqueous thermodynamic model for a high valence 4∶2 electrolyte Th4+−SO 4 2− in the system Na+−K+−Li+−NH 4 + −Th4+−SO 4 2− −HSO 4 − −H2O to high concentration

An aqueous thermodynamic model that is valid from zero to high concentration is proposed for the Na⁺–K⁺–Li⁺–NH ₄ ⁺ –Th⁴⁺–SO ₄ ^2– –HSO ₄ ^– –H₂O system. The model is based on the aqueous ion-interaction model of Pitzer and coworkers. The thorium sulfate complex species Th(SO₄)₂(aq) and Th(SO₄) ₃ ^2– are also included in the model. The final thermodynamic model presented here accurately predicts all reliable thermodynamic data, including solvent extraction and solubility data, for the Na⁺–K⁺–Li⁺–NH ₄ ⁺ –Th⁴⁺–SO ₄ ^2– –HSO ₄ ^– –H₂O system to high concentration. The aqueous thermodynamics of high-valence (3:2, 4:2), electrolytes are complicated by very strong specific ion interactions or ion pairing in dilute solution and by an effective redissociation of aqueous complex species at high concentration. Methods of treating these complications, in terms of valid aqueous thermodynamic models, are discussed in detail for the high-valence Th⁴⁺–SO ₄ ^2– –H₂O system.     

Intradiffusion coefficients of all species in aqueous gallium perchlorate solutions and solution viscosities at 25°C

Intradiffusion coefficients of all species (cation, anion and solvent) and viscosities have been measured for aqueous solutions of gallium perchlorate in the concentration range 0–2.3 mol-kg^–1 at 25°C. The perchlorate ion intradiffusion measurements were made using³⁶ClO ₄ ^– as the tracer species in diaphragm cell experiments. The development of a method to synthesize³⁶ClO ₄ ^– from³⁶Cl^– by electrolysis is described. The perchlorate intradiffusion coefficients results show a concentration dependence that is very similar to that for D(Cl^–) in corresponding trivalent metal chloride solutions. A simple hydration analysis based on all the transport results estimates a total (effective) cation hydration for gallium within a 0–2 mol-kg^–1 range of 10 (±1.5).     

1, 2-Dithiolium salts

4-(p-Tolyl)-1,2-dithiolium hydrogen sulfate (I) is not a specific analytical reagent for the majority of anions, and it is not very selective, only in a few cases attaining pD=5 (MoO₄ ^2–, [Hg(CNS)₄]^2–, and [PtCl₆]^2–). All strongly colored anions give colored salts with I. Among the weakly colored anions, the [Fe(CN)₆]^4– anion is worthy of special note, since it forms a deeply colored salt with I. This anion can be detected with I in the presence of Cl^–, Br^–, I^–, CNS^–, ClO₄ ^–, IO₄ ^–, and ReO₄ ^–, which form fairly readily soluble salts with I. Compound I is also a fairly selective reagent for Pd²⁺ in acid solution (pD=5).For part II, see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, Vol. 6, No. 5, pp. 595–597, May, 1970.     

Reaction of Tetraphenylantimony Bromide with o-Tolylbismuth Bis(2,5-dimethylbenzenesulfonate). The Formation of Tetranuclear Anion [Bi4Br16]4–

The [Ph₄Sb]₄[Bi₄Br₁₆] complex was synthesized via reaction of tetraphenylantimony bromide with o-tolylbismuth bis(2,5-dimethylbenzenesulfonate) and studied using X-ray diffraction analysis. This compound has ionic structure and consists of tetraphenylstibonium cations and a four-charge tetranuclear anion [Bi₄Br₁₆]^4– formed by two pairs of edge-sharing iBr₆ octahedra. The Sb–C bond lengths are equal to 2.05(1)–2.10(1) Å, the Bi–Br distances lie within the 2.649(2)–3.246(2) Å range, and the Sb(1)···Br(7) distance is equal to 3.934(2) Å.     

Organic Ion Exchangers. Synthesis and Their Behaviour in the Retention of Some Metal Ions

Summary: Three pyridine strong base anion exchangers as beads were obtained by quaternization reactions of a 4-vinylpyridine : 8% divinylbenzene copolymer of gel type. These resins possess methyl / ethyl / butyl radicals as substituents on N⁺ atoms and have exchange capacities of 4.80 mEq/g and 2.10 mEq/mL. For pyridine strong base anion exchangers, the behaviours in the retention processes of Cr(VI) as oxyanions and Ga(III) as [GaCl₄]⁻ complex anion were evaluated with the bath method. All the resins exhibited retention properties, but the retained amounts of the metal cations are different as a function of the alkyl length as substituent on N⁺ atoms and the complex anion nature. Thus, Cr(VI) oxyanions are best retained by the resin with  CH₃ as substituent on N⁺ atoms while [GaCl₄]⁻ complex anion by the resin with  C₄H₉ as substituent on N⁺ atoms. By aminolysis reaction of an ethylacrylate : acrylonitrile : divinylbenzene copolymer as beads of macroporous type with NH₂OH · HCl in the presence of C₂H₅OH a new chelating ion exchanger was performed which contains both amidoxime and hydroxamic acid functional groups. This ion exchanger has the retention property for different metal cations but its retention capacities values are strongly dependent of the nature of metal cation and the counterion as well as pH of the solution. Thus, in the static conditions Zn(II) cation with NOequation/tex2gif-stack-1.gif anion as counterion is retained with the best result at pH = 5. As an example, for the aqueous metal cation solution of 10⁻² M concentration for Zn(NO₃)₂ the resin possess at equilibrium a retention capacity of 6.70 mmol Zn/g dry resin and for Cu(II) from Cu(NO₃)₂ solution of same concentration, the retention capacity is 0.22 mmol Cu/g dry resin and Fe(III) from Fe(NO₃)₃ solution is not retained.     

In situ Near-Infrared Spectroelectrochemical Investigation of Redox States of Polyaniline during Growth and Doping

In situ near-infrared (NIR) spectroelectrochemical studies during growth and dedoping/redoping of polyaniline (PANI) in the range between 1200 to 3000 nm are carried out in 1 M aqueous solutions of HCl, H₂SO₄, and HClO₄ acids andp-toluene sulfonic acid (PTSA). The results show three characteristic absorption bands around 1440, 1900, and 2500 nm. The band at 2500 nm is characteristic of mobile charge carriers. The PANI prepared in HClO₄ keeps memory of the size of the doping anion (ClO₄ ^–) and can be redoped only with the same or smaller anions (Cl^– and SO₄ ^2– or HSO₄ ^–) while it cannot be redoped to any significant extent by a larger anion (PTSA^–).     

Analytical methods for the speciation of selenium compounds: a review

Selenium, like sulphur, exists in the environment in several oxidation states and as a variety of inorganic and organic compounds. Dissolved inorganic selenium can be found in natural waters as selenide Se (–II), as colloidal elemental selenium Se (0), as selenite anions HSeO ₃ ^– and SeO ₃ ^2– i.e. Se (+IV) and as the selenate anion (SeO ₄ ^2– ) i.e. Se (+VI). Organic forms of selenium that may be found in organisms, air or in the aqueous environment, are volatile (methylselenides) or non volatile (trimethylselenonium ion, selenoamino acids and their derivatives). Knowledge of the different chemical forms and their environmental and biomedical distribution is important because of the dependence of bioavailability and toxicity on speciation. This paper reviews the different analytical methods used for the speciation of selenium compounds, with special attention to inorganic selenium and organoselenium species.