Screening for pharmaceutically important taxoids in Taxus baccata var. Aurea corr. with CC/SPE/HPLC-PDA procedure

Needles of 'the golden yew' Taxus baccata var. Aurea Corr. were extracted with methanol followed by pre-purification of the crude extract and column chromatographic (CC) separation on florisil in gradient mode (an increasing concentration of acetone in dichloromethane). The obtained fractions were concentrated and purified on silanized silica gel SPE cartridges and taxoids eluted with 75% methanol were analysed by HPLC-PDA procedure using Waters Symmetry C(18) column with gradient elution. The applied method enabled not only determination of four taxoids commonly occurring in yew extracts (10-deacetylbaccatin III, baccatin III, paclitaxel and cephalomannine), but also, on the basis of chromatographic behaviour and UV spectrum, 10-deacetylated taxoids (10-deacetylpaclitaxel, 10-deacetylcephalomannine, 7-xyloside-10-deacetylpaclitaxel and 10-deacetyltaxol C) could be detected together with 7-epi-10-deacetylpaclitaxel. From the needles of Taxus baccata var. Aurea Corr. the largest amounts isolated were of 10-deacetylbaccatin III, then 10-deacetylpaclitaxel and 7-xyloside-10-deacetylpaclitaxel, all compounds considered to be paclitaxel precursors in semisynthesis. The efficient mechanism of the separation of 10-acetylated taxoids from their 10-deacetylated derivatives on florisil on the basis of electron acceptor-electron donor interactions is discussed.     

Simultaneous determination of main taxoids in Taxus needles extracts by solid-phase extraction-high-performance liquid chromatography with pentafluorophenyl column

A simple and accurate RP-HPLC method with pentafluorophenyl (PFP) column was developed for the simultaneous determination of six taxoids, i.e. paclitaxel, 10-deacetylbaccatin III (10-DAB III), 7-xylosyl-10-deacetyltaxol (7-xyl-10-DAT), 10-deacetyltaxol (10-DAT), cephalomannine and 7-epi-10-deacetyltaxol (7-epi-10-DAT), in the extracts from the needles of three Taxus species. The mobile phase consisted of acetonitrile (A) and water (B), and the extracts were separated using gradient elution program: 30% A at the first 7 min, and then ramped to 42% A at 8 min, held until 38 min. The developed method was validated with satisfactory precision (RSD < 2.61%), repeatability (RSD < 2.92%) and recovery (95.19-104.47%). The above taxoids in the extracts of Taxus cuspidata, T. chinensis and T. media were analyzed with the developed RP-HPLC method, and the results showed that the contents of different taxoids in three mentioned species were distinct. Maximal amounts of 10-DAB III, 7-xyl-10-DAT and 7-epi-10-DAT appeared in T. chinensis, while T. media possessed the highest content of 10-DAT, cephalomannine and paclitaxel. The developed method is accurate and efficient. It can be reliably used in the improved determination of taxoids for the quality control of Taxus species.     

Preparative separation and enrichment of four taxoids from Taxus chinensis needles extracts by macroporous resin column chromatography

An environment‐friendly method was established for the preparative separation and enrichment of four taxoids, namely 10‐deacetylbaccatin III (10‐DAB III), 7‐xylosyl‐10‐deacetyltaxol (7‐xyl‐10‐DAT), cephalomannine and paclitaxel from Taxus chinensis needles extracts. Characteristics of seven widely used macroporous resins for four taxoids were compared, AB‐8 resin offered better adsorption and desorption capacities than others. AB‐8 resin column chromatography was used to study the desorption process for four taxoids. The optimum parameters for desorption were 30% ethanol 5 RV for removing impurities, following 15 RV for 10‐DAB III, after the desorption of impurities with 35% ethanol 10 RV, 45% ethanol 30 RV for 7‐xyl‐10‐DAT, then 65% ethanol 10 RV for cephalomannine and paclitaxel, the flow rate was 6 RV/h. After separation on AB‐8 resin column chromatography, the contents of 10‐DAB III, 7‐xyl‐10‐DAT, cephalomannine and paclitaxel in the product reached 4.58, 13.17, 1.36 and 3.08%, respectively, which were 7.63‐, 3.68‐, 6.18‐ and 6.55‐fold to those in T. chinensis needles extracts. The recovery yields were 94.96, 77.32, 88.09 and 95.25%. In general, the AB‐8 resin column chromatography has the advantages of lower cost, high efficiency and simple procedure. Therefore, it may provide scientific references for the preparative separation and enrichment of taxoids from other T. species.     

Separation of 7-xylosyl-10-deacetyl paclitaxel and 10-deacetylbaccatin III from the remainder extracts free of paclitaxel using macroporous resins

The separation and enrichment of 10-deacetylbaccatin III (10-DAB III) and 7-xylosyl-10-deacetyl paclitaxel were studied on seven macroporous resins with special structures. The performance of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III on macroporous resins including AB-8, ADS-17, ADS-21, ADS-31, ADS-8, H1020 and NKA-II was compared according to their adsorption and desorption properties. AB-8 provided a much higher adsorption capacity for 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III than other resins, and its adsorption data fitted well to the Langmuir and Freundlich isotherm. According to the adsorption and desorption capacities and the adsorption isotherms, AB-8 demonstrated a remarkable capability for the preparative separation of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III from the remainder extracts free of paclitaxel. In order to optimize parameters of separation, dynamic adsorption and desorption experiments were carried out on the columns packed with AB-8 resin. The optimal conditions were: the processing volume 15 BV; concentrations of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III in feed solution 0.0657 mg/mL and 0.1494 mg/mL; flow rate 1 mL/min; temperature 35 degrees C. The gradient elution program was as follows: 30% ethanol for 3 BV, then 80% of ethanol for 6 BV, flow rate 1 mL/min. After the AB-8 resin treatment, the contents of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III in the product had increased from 0.053% and 0.2% to 3.34% and 1.69%, which were 62.43-fold and 8.54-fold of those in the untreated extracts, respectively, and the recoveries of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III were 85.85% and 52.78%. The performance achieved good separation and higher recovery of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III from remainder extracts free of paclitaxel by using AB-8 resin. It is a fast and effective method for the separation and enrichment of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III.     

新乡红豆杉中多种紫杉烷类化合物的反相高效液相色谱分析

采用反相高效液相色谱法(RP-HPLC)研究了新乡种植红豆杉树皮中的多种紫杉烷类化合物.结果表明,新乡种植红豆杉树皮中的10-去乙酰巴卡丁Ⅲ、巴卡丁Ⅲ、7-木糖-10-去乙酰基三尖杉宁碱、7-木糖-10-去乙酰基紫杉醇、7-木糖-10-去乙酰基紫杉醇C、10-去乙酰基紫杉醇、三尖杉宁碱和紫杉醇的平均含量(质量分数,n=...     

Conversion of taxane glycosides to 10-deacetylbaccatin III

10-Deacetylbaccatin III (10-DAB III) (2) was obtained by a series of treatment of a mixture of taxane glycosides (3, 4, and 5) without isolation before treatment. Since the taxane glycosides are isolated with paclitaxel from yew trees and can be found during the process of the production of paclitaxel, their conversion to 10-DAB III improves the total yield of paclitaxel (1) and docetaxel.     

Determination of paclitaxel and its analogues in the needles of Taxus species by using negative pressure cavitation extraction followed by HPLC‐MS‐MS

A new separation method, negative pressure cavitation (NPC) extraction followed by HPLC‐MS‐MS for the determination of paclitaxel and its analogues in the needles of Taxus species is described in this study. Compared with three conventional extraction methods, NPC is a more effective, economical, and facile method for the separation of nature compounds from herbal plants. In contrast to high‐temperature extraction, NPC at low temperature can minimize undesirable reactions such as thermal decomposition or degradation. In addition, the extraction mechanism of NPC was also illuminated. The effects of vacuum degree, extraction solvent, ratio of solid to liquid, time, and times extraction were studied and optimized. The optimum extraction conditions were as follows: vacuum degree –0.03 MPa, solvent 80% v/v alcohol, ratio of material to liquid 1:15 (g/mL), extraction time 60 min, extraction (×3). Using these conditions, the recoveries of 10‐deacetyl‐7‐xylosylpaclitaxel, 10‐deacetylpaclitaxel, cephalomannine, and paclitaxel were higher than 95.88, 95.82, 94.85, and 96.18%, respectively. The contents of paclitaxel, 10‐deacetyl‐7‐xylosylpaclitaxel, 10‐deacetylpaclitaxel, and cephalomannine for Taxus chinensis were 0.0053, 0.0467, 0.0132, and 0.0076%, and 0.0067, 0.0153, 0.0047, and 0.0064% for Taxus cuspidata, respectively. Furthermore, a comparison of SEM images observed the morphological changes of microstructures and cellular damage in yew needles.     

Optimization of ultrasonic-assisted extraction of three main taxoids in the twigs of Taxus × media using multi-objective response surface methodology

A multi-objective response surface methodology (RSM) based on a desirability function analysis (DFA) was used to model and optimize the operational parameters of ultrasonic-assisted extraction of three main taxoids in the twigs of Taxus × media. Liquid–solid ratio, extraction temperature, extraction time, and ultrasonic power were chosen as four independent variables, with three objective variables considered: the extraction yields of 10-deacetylbaccatin III (10-DAB III), cephalomannine and paclitaxel. Under the predicted conditions with the highest “desirability’’, compared with the predicted value, the goodness of fit for the experiment extraction yields of 10-DAB III, cephalomannine and paclitaxel was 97.36, 100.81, and 97.46%, respectively. Analysis of variance (ANOVA), regression analysis, and verification test indicated a satisfactory correlation between the experimental data and predicted values. These results showed that RSM and DFA were good methods to solve the problem of multi-objective optimization.     

Biological Fingerprinting Analysis of Interaction Between Taxoids in Taxus and Microtubule Protein by Microdialysis Coupled with High-performance Liquid Chromatography/Mass Spectrometry for Screening Antimicrotubule Agents

Some natural products, such as traditional Chinese medicines（TCMs）, contain compounds with anticancer activity and have attracted a great interest in recent years as alternative anticancer therapies. A quick and convenient assay for screening antimicrotubule compounds in which in vitro microdialysis/high-performance liquid chromatography （HPLC） is used to monitor the binding of the compounds extracted from TCM Taxus cuspidata Siebold ＆ Zucc（Taxus） to microtubules is reported. It was observed that the extract of Taxus contains at least five compounds which have affinity interaction with microtubules by biological fingerprinting analysis, and they were identified as the taxoids of taxol, baccatin III, 10-deacetylbaccatin Ⅲ（10-DAB）, cephalomannine and 7-epi-10-deacetyltaxol （7-epi-10-DAT） based on the comparison of their high-performance liquid chromatographic/mass spectrometric and UV spectra with those of the standard samples, both assembly-promoting and disassembly-inhibiting characteristics of those compounds were evaluated. It was observed that baccatin Ⅲ and 10-DAB bound to microtubules and the binding degrees were influenced by GTP. Competitive binding behavior of taxol with other four taxoids to microtubules was also investigated.     

Optimization of the Isolation of Some Taxoids from Yew Tissues

JPC – Journal of Planar Chromatography – Modern TLC - A new TLC procedure has been developed for the purification, separation, and isolation of paclitaxel and cephalomannine from yew...     

Activity Essential Residue Analysis of Taxoid 10β-O-Acetyl Transferase for Enzymatic Synthesis of Baccatin

Taxoid 10β-O-acetyl transferase (DBAT) is a key enzyme in the biosynthesis of the famous anticancer drug paclitaxel, which catalyses the formation of baccatin III from 10-deacetylbaccatin III (10-DAB). However, the activity essential residues of the enzyme are still unknown, and the acylation mechanism from its natural substrate 10-deacetylbaccatin III and acetyl CoA to baccatin III remains unclear. In this study, the homology modelling, molecular docking, site-directed mutagenesis, and kinetic parameter determination of the enzyme were carried out. The results showed that the enzyme mutant DBAT^H162A resulted in complete loss of enzymatic activity, suggesting that the residue histidine at 162 was essential to DBAT activity. Residues D166 and R363 which were located in the pocket of the enzyme by homology modelling and molecular docking were also important for DBAT activity through the site-directed mutations. Furthermore, four amino acid residues including S31 and D34 from motif SXXD, D372 and G376 from motif DFGWG also played important roles on acylation. This was the first report of the elucidation of the activity essential residues of DBAT, making it possible for the further structural-based re-design of the enzyme for efficient biotransformation of baccatin III and paclitaxel.     

Regioselective protection of 10-deacetylbaccatin Ⅲ and semi-synthesis of paclitaxel

Semi-synthesis of paclitaxel was achieved in four steps from 10-deacetylbaccatin HI （10-DAB HI）. The key steps are the regioselective protection at the hydroxyl group at C-7 of 10-DAB HI, using 1,1′-thiocarbonyldiimidazole as a selective reagent, and the deprotection of the protected paclitaxel with a mixture of p-toluenesulfonic acid and 0.1 mol/L aqueous hydrochloride.     

Analysis of taxol and major taxoids in Himalayan yew, Taxus wallichiana.

A reversed-phase column liquid chromatography method for the analysis of taxol, 10-deacetylbaccatin III, baccatin IV, 1-hydroxybaccatin I, 2-acetoxybrevifoliol, brevifoliol, 2'-deacetoxydecinnamoyltaxinine J and 2'-deacetoxytaxinine J in yew needles has been developed using a Nova-Pak Phenyl column and a binary gradient profile. The various aspects of analysis such as extraction efficiency, detection limits, reproducibility and peak purity were validated using UV-Vis as well as photodiode array detection.     

西藏红豆杉中紫杉醇及相关紫杉烷含量的高效液相色谱分析

确立了紫杉醇及５种相关紫杉烷类化合物的反相高效液相色谱分析方法。最佳条件是用ＲｅｓｏｌｖｅｐａｋＣ１８柱,甲醇－水为流动相,紫外２２８ｎｍ检测。对６种化合物在反相柱上的保留机理进行了初步探讨。６种化合物的线性范围为０．１～２．０μｇ,最低检测限为０．１μｇ。     

Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).     

Regioselective protection of 10-deacetylbaccatin Ⅲ and semi-synthesis of paclitaxel

Semi-synthesis of paclitaxel was achieved in four steps from 10-deacetylbaccatin Ⅲ (10-DAB Ⅲ).The key steps are the regioselective protection at the hydroxyl group at C-7 of 10-DAB HI,using 1,1'-thiocarbonyldiimidazole as a selective reagent,and the deprotection of the protected paclitaxel with a mixture of p-toluenesulfonic acid and 0.1 mol/L aqueous hydrochloride.     

Purification and characterization of Taxol and 10-Deacetyl baccatin III from the bark,needles, and endophytes of Taxus baccata by preparative high-performance liquid chromatography,ultra-high-performance liquid chromatography-mass spectrometry,and nuclear magnetic resonance

Taxol and 10-Deacetyl baccatin III are major taxanes in the bark, needles, and endophytes of Taxus baccata. The current study aimed to develop a process for their separation from different matrices. Crude taxoid was prepared by extraction of samples with methanol, followed by partitioning with dichloromethane and precipitation with hexane. Analytical high-performance liquid chromatography involved isocratic elution on C18 column (4.6 × 250 mm, 5 μm) with methanol-water (70:30 v/v) at a flow rate of 1 ml/min. Injection volume was 20 μl and detection was carried out at 227 nm. The content of Taxol and 10-Deacetyl baccatin III in bark, needles and endophytic culture broth was 11.19 and 1.75 μg/mg; 11.19 and 1.75 μg/mg; and 2.80 and 0.22 μg/L, respectively. Preparative high-performance liquid chromatography was done on C18 column (10 × 250 mm, 5 μm) at a flow rate of 10 ml/min. About 20 g crude taxoid was processed in < 3 h with a recovery of about 90% for both the analytes. The purity of recovered Taxol and 10-Deacetyl baccatin III determined by ultra-high-performance liquid chromatography-mass spectrometry was found to be 95.78 ± 3.63% and 99.72 ± 0.18%, respectively. The structure of recovered Taxol was confirmed by nuclear magnetic resonance. The method can find use in biotransformation studies.     

Studies on factors influencing stability and recovery of paclitaxel from suspension media and cultures of Taxus cuspidata cv Densiformis by high-performance liquid chromatography

An HPLC method was developed for quick scanning of taxanes from large numbers of plant cell suspension samples. The method was optimized for analysis of a range of taxanes of differing polarity. Identification of a standard mixture of paclitaxel and 12 related taxanes was achieved in less than 15 min using a gradient mode and a Microsorb-MV C8 column. The method was used to investigate the influence of several factors on stability and recovery of paclitaxel from suspension media and cultures of Taxus cuspidata cv Densiformis. Incubation time had the most significant influence on stability of paclitaxel, contributing 88% to the total variation. Shaking contributed 6% to the total variation. Light contributed only 0.25% to the total variation. Analysis of test samples of suspension cultures of T. cuspidata cv Densiformis over a 4 week period show paclitaxel, 10-deacetylbaccatin III, and baccatin III levels ranging from 0 to 149 microg/L, from 0 to 1.9 mg/L, and from 0 to 583 microg/L, respectively.     

Validation issues arising from the new FDA guidance for industry on bioanalytical method validation

Summary Silica and aqueous methanolic mobile phases have been optimized for the purification of crude yew extracts. From the recoveries measured for 10-deacetylbaccatin Ill and paclitaxel it was found that 20% methanol in water elutes all taxoids from the adsorbent and that non-polar materials remain in the starting band; this enables preparation of the samples before HPLC analysis. Partial separation of the taxoid fraction was achieved by elution with pure water then 6:4 methanol-water. Such systems on a large scale can be used for preparative separation of taxoids. Partially separated fractions are re-chromatographed in a normal-phase system consisting of silica with a non-aqueous mobile phase. This procedure enables isolation of 10-deacetylbaccatin Ill from the fraction. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Vibrational circular dichroism analysis reveals a conformational change of the baccatin III ring of paclitaxel: visualization of conformations using a new code for structure-activity relationships

The comparison between measured and conformer-weighted calculated VCD spectra of the baccatin III ring of paclitaxel and visualization of the conformations using the new code for structure-activity relationships are reported for the first time. The VCD spectrum of paclitaxel closely resembles that of the baccatin III ring. The large characteristic nuCO VCD bands with bisignate signs (1732 cm-1, Deltaepsilon = -1.6 x 10(-1); 1715 cm(-1), Deltaepsilon = 2.4 x 10(-1)) strongly reflect the structural property of the family of conformations bacc-ABC32F defined using the new code. The comparison with the conformation of the baccatin III core in the electron micrograph of the crystal structure of tubulin-paclitaxel (1JFF) suggests a conformational change of paclitaxel corresponding to a switch through the binding with beta-tublin and the intermolecular interactions involving the hydroxyl group (D) and carbonyl of acetoxy group (E). The representation of conformational codes allows complicated conformations to be very easily compared and facilitates future computational analyses such as those for the large-molecule calculations as well as genome analysis.