Osmium-mediated C--H and C--C bond cleavage of a phenolic substrate: p-quinone methide and methylene arenium pincer complexes

The diphosphine 2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)OH (1) reacts with [OsCl(2)(PPh(3))(3)] in presence of an excess of triethylamine to yield the isomeric para-quinone methide derivatives [Os{4-(CH(2))-1-(O)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))] (2 and 3), which differ in the positions of the mutually trans hydride and chloride ligands. Complex 2 reacts with CO to afford the dicarbonyl species [Os{1-(O)-2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(CO)(2)] (4), which results from hydride insertion into the quinonic double bond. Protonation of 2 and 3 leads to the formation of the methylene arenium derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))][OSO(2)CF(3)] (5 a). The diphosphine 1 reacts with [OsCl(2)(PPh(3))(3)] at 100 degrees C under H(2) to afford [Os{1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H(2))(PPh(3))] (6), a PCP pincer complex resulting formally from C(sp(2))--C(sp(3)) cleavage of the C--CH(3) group in 1. C--C hydrogenolysis resulting in the same complex is achieved by heating 2 under H(2) pressure. Reaction of the diphosphine substrate with [OsCl(2)(PPh(3))(3)] under H(2) at lower temperature allows the observation of a methylene arenium derivative resulting from C--H activation, [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(2)(H)] (7). This compound reacts with PPh(3) in toluene to afford the ionic derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))]Cl (5 b). X-ray diffraction studies have been carried out on compounds 2, 3, 4, 5 b, 6, and 7, which allows the study of the structural variations when going from methylene arenium to quinone methide derivatives.     

Synthesis and x-ray crystal structure of [(THF)Zn(O(2)(OH)SiR)](4) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))): enroute to larger aggregates

Reaction of aminosilanetriol RSi(OH)(3) (1) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) with diethyl zinc at room temperature in 1:1 stoichiometric ratio affords [(THF)Zn(O(2)(OH)SiR)](4) (2) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) in good yield. The single-crystal X-ray diffraction studies reveal that 2 is monoclinic, P2(1), with a = 17.117(3) A, b = 16.692(5) A, c = 17.399(4) A, alpha = gamma = 90 degrees, beta = 91.45(7) degrees, and Z = 2. The molecular structure of 2 contains two puckered eight-membered Zn(2)Si(2)O(4) rings, which are connected by the Zn-O bonds and form two planar four-membered Zn(2)O(2) rings. Compound 2 contains an unreacted hydroxyl group on each silicon atom, and hence, we carried out the reactions of 2 with dimethylzinc and methyllithium to form [Zn(4)(THF)(4)(MeZn)(4)(O(3)SiR)(4)] (3) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) and [(L)ZnLi(O(3)SiR)](4) (4) (L = 1,4-(Me(2)N)(2)C(6)H(4), R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))), respectively. This suggested that 2 could be an intermediate product formed during the synthesis of 3 and 4.     

C-H activation and C=C double bond formation reactions in iridium ortho-methyl arylphosphane complexes

The Vaska-type iridium(I) complex [IrCl(CO){PPh(2)(2-MeC(6)H(4))}(2)] (1), characterized by an X-ray diffraction study, was obtained from iridium(III) chloride hydrate and PPh(2)(2,6-MeRC(6)H(3)) with R=H in DMF, whereas for R=Me, activation of two ortho-methyl groups resulted in the biscyclometalated iridium(III) compound [IrCl(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}(2)] (2). Conversely, for R=Me the iridium(I) compound [IrCl(CO){PPh(2)(2,6-Me(2)C(6)H(3))}(2)] (3) can be obtained by treatment of [IrCl(COE)(2)](2) (COE=cyclooctene) with carbon monoxide and the phosphane in acetonitrile. Compound 3 in CH(2)Cl(2) undergoes intramolecular C-H oxidative addition, affording the cyclometalated hydride iridium(III) species [IrHCl(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}{PPh(2)(2,6-Me(2)C(6)H(3))}] (4). Treatment of 2 with Na[BAr(f) (4)] (Ar(f)=3,5-C(6)H(3)(CF(3))(2)) gives the fluxional cationic 16-electron complex [Ir(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}(2)][BAr(f) (4)] (5), which reversibly reacts with dihydrogen to afford the delta-agostic complex [IrH(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}{PPh(2)(2,6-Me(2)C(6)H(3))}][BAr(f)(4)] (6), through cleavage of an Ir-C bond. This species can also be formed by treatment of 4 with Na[BAr(f)(4)] or of 2 with Na[BAr(f)(4)] through C-H oxidative addition of one ortho-methyl group, via a transient 14-electron iridium(I) complex. Heating of the coordinatively unsaturated biscyclometalated species 5 in toluene gives the trans-dihydride iridium(III) complex [IrH(2)(CO){PPh(2)(2,6-MeC(6)H(3)CH=CHC(6)H(3)Me-2,6)PPh(2)}][BAr(f) (4)] (7), containing a trans-stilbene-type terdentate ligand, as result of a dehydrogenative carbon-carbon double bond coupling reaction, possibly through an iridium carbene species.     

Synthesis, structure, and reactivity of ruthenium carboxylato and 2-oxocarboxylato complexes bearing the bis(3,5-dimethylpyrazol-1-yl)acetato ligand

A series of ruthenium(II) acetonitrile, pyridine (py), carbonyl, SO2, and nitrosyl complexes [Ru(bdmpza)(O2CR)(L)(PPh3)] (L = NCMe, py, CO, SO2) and [Ru(bdmpza)(O2CR)(L)(PPh3)]BF4 (L = NO) containing the bis(3,5-dimethylpyrazol-1-yl)acetato (bdmpza) ligand, a N,N,O heteroscorpionate ligand, have been prepared. Starting from ruthenium chlorido, carboxylato, or 2-oxocarboxylato complexes, a variety of acetonitrile complexes [Ru(bdmpza)Cl(NCMe)(PPh3)] (4) and [Ru(bdmpza)(O2CR)(NCMe)(PPh3)] (R = Me (5a), R = Ph (5b)), as well as the pyridine complexes [Ru(bdmpza)Cl(PPh3)(py)] (6) and [Ru(bdmpza)(O2CR)(PPh3)(py)] (R = Me (7a), R = Ph (7b), R = (CO)Me (8a), R = (CO)Et (8b), R = (CO)Ph) (8c)), have been synthesized. Treatment of various carboxylato complexes [Ru(bdmpza)(O2CR)(PPh3)2] (R = Me (2a), Ph (2b)) with CO afforded carbonyl complexes [Ru(bdmpza)(O2CR)(CO)(PPh3)] (9a, 9b). In the same way, the corresponding sulfur dioxide complexes [Ru(bdmpza)(O2CMe)(PPh3)(SO2)] (10a) and [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) were formed in a reaction of the carboxylato complexes with gaseous SO2. None of the 2-oxocarboxylato complexes [Ru(bdmpza)(O2C(CO)R)(PPh3)2] (R = Me (3a), Et (3b), Ph (3c)) showed any reactivity toward CO or SO2, whereas the nitrosyl complex cations [Ru(bdmpza)(O2CMe)(NO)(PPh3)](+) (11) and [Ru(bdmpza)(O2C(CO)Ph)(NO)(PPh3)](+) (12) were formed in a reaction of the acetato 2a or the benzoylformato complex 3c with an excess of nitric oxide. Similar cationic carboxylato nitrosyl complexes [Ru(bdmpza)(O2CR)(NO)(PPh3)]BF4 (R = Me (13a), R = Ph (13b)) and 2-oxocarboxylato nitrosyl complexes [Ru(bdmpza)(O2C(CO)R)(NO)(PPh3)]BF4 (R = Me (14a), R = Et (14b), R = Ph (14c)) are also accessible via a reaction with NO[BF4]. X-ray crystal structures of the chlorido acetonitrile complex [Ru(bdmpza)Cl(NCMe)(PPh3)] (4), the pyridine complexes [Ru(bdmpza)(O2CMe)(PPh3)(py)] (7a) and [Ru(bdmpza)(O2CC(O)Et)(PPh3)(py)] (8b), the carbonyl complex [Ru(bdmpza)(O2CPh)(CO)(PPh3)] (9b), the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b), as well as the nitrosyl complex [Ru(bdmpza)(O2C(CO)Me)(NO)(PPh3)]BF4 (14a), are reported. The molecular structure of the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) revealed a rather unusual intramolecular SO2-O2CPh Lewis acid-base adduct.     

SHOP-type nickel complexes with alkyl substituents on phosphorus, synthesis and catalytic ethylene oligomerization

The beta-keto phosphorus ylides (n-Bu)3P=CHC(O)Ph 6, (t-Bu)2PhP=CHC(O)Ph 7, (t-Bu)Ph2P=CHC(O)Ph 8, (n-Bu)2PhP=CHC(O)Ph 9, (n-Bu)Ph2P=CHC(O)Ph 10, Me2PhP=CHC(O)Ph 11 and Ph3P=CHC(O)(o-OMe-C6H4) 12 have been synthesized in 80-96% yields. The Ni(II) complexes [NiPh{Ph2PCH...C(...O)(o-OMeC6H4)}(PPh3)] 13, [NiPh{Ph(t-Bu)PCHC(O)Ph}(PPh3)] 15, [NiPh{(n-Bu)2PCH...C(...O)Ph}(PPh3)] 16 and [NiPh{Ph(n-Bu)PCH...C(...O)Ph}(PPh3)] 17 have been prepared by reaction of equimolar amounts of [Ni(COD)2] and PPh3 with the beta-keto phosphorus ylides 12 or 8-10, respectively, and characterized by 1H and 31P{1H} NMR spectroscopy. NMR studies and the crystal structure determination of 13 indicated an interaction between the hydrogen atom of the C-H group alpha to phosphorus and the ether function. The complexes [NiPh{Ph2PCHC(O)Ph}(Py)] 18, [NiPh{Ph(t-Bu)PCHC(O)Ph}(Py)] 19, [NiPh{(n-Bu)2PCH...C(...O)Ph}(Py)] 20, [NiPh{Ph(n-Bu)PCH...C(...O)Ph}(Py)] 21 and [NiPh{Me2PCH...C(...O)Ph}(Py)] 22 have been isolated from the reactions of [Ni(COD)2] and an excess of pyridine with the -keto phosphorus ylides Ph3PCH=C(O)Ph 3 or 8-11, respectively, and characterized by 1H and 31P{1H} NMR spectroscopy. Ligands 3, 8, 10 and 12 have been used to prepare in situ oligomerization catalysts by reaction with one equiv. of [Ni(COD)2] and PPh3 under an ethylene pressure of 30 or 60 bar. The catalyst prepared in situ from 12, [Ni(COD)2] and PPh3 was the most active of the series with a TON of 12700 mol C2H4 (mol Ni)-1 under 30 bar ethylene. When the beta-keto phosphorus ylide 8 was reacted in situ with three equiv. of [Ni(COD)2] and one equiv. of PPh3 under 30 bar of ethylene, ethylene polymerization was observed with a TON of 5500 mol C2H4 (mol Ni)-1.     

Diverse modes of reactivity of dialkyl azodicarboxylates with P(III) compounds: synthesis, structure, and reactivity of products other than the Morrison-Brunn-Huisgen intermediate in a Mitsunobu-type reaction

The reactivity of diethyl azodicarboxylate (DEAD)/diisopropyl azodicarboxylate (DIAD) with P(III) compounds bearing oxygen or nitrogen substituents is explored. Compounds with structures quite different from that of Morrison-Brunn-Huisgen intermediate R'(3)P(+)N(CO(2)R)N(-)(CO(2)R) (1), observed in the Mitsunobu reaction, have been established by using X-ray crystallography and NMR spectroscopy. Thus reactions with X(6-t-Bu-4-Me-C(6)H(2)O)(2)P-NH-t-Bu [X = S (8), CH(2) (9)] or XP(mu-N-t-Bu)(2)P-NH-t-Bu [X = Cl (14) or NH-t-Bu (15)] and DEAD/DIAD lead to phosphinimine-carbamate-type of products X[6-t-Bu-4-Me-C(6)H(2)O](2)P[N-t-Bu][N(CO(2)R)NH(CO(2)R)] [X = S, R = Et (16); X = CH(2), R = Et (17); X = CH(2), R = i-Pr (18)] or XP(mu-N-t-Bu)(2)P(N-t-Bu)[N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr) [X = Cl (19), NH-t-Bu (20)]. Treatment of 19 with 2,2,2-trifluoroethanol afforded the product [(CF(3)CH(2)O)P(mu-N-t-Bu)(2)P(+)(NH-t-Bu)[N(CO(2)-i-Pr)(HNCO(2)-i-Pr)]][Cl(-)] (21) whose structure is close to one of the intermediates proposed in the Mitsunobu reaction. The isocyanate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P-NCO (10) underwent 1,3-(P,C) cycloaddition with DEAD/DIAD to lead to CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P[N(CO(2)R)N(CO(2)R)-C(O)-N] [R = Et (22), i-Pr (23)]. Reaction of 22-23 with 1,1'-bi-2-naphthol or catechol leads to novel tetracoordinate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P(2,2'-OC(10)H(6)-C(10)H(6)-OH)[NC(O)-(CO(2)R)NH(CO(2)R)] [R = Et (24), i-Pr (25)] or pentacoordinate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P(1,2-O(2)C(6)H(4))[NHC(O)-N(CO(2)R)NH(CO(2)R)] [R = Et (26), i-Pr (27)] compounds in which the original NCO residue is retained; this mode of reactivity is quite different from that observed for the MBH betaine 1. In 27, the nitrogen, rather than the oxygen, occupies an apical position of the trigonal bipyramidal phosphorus violating the commonly assumed preference rules for apicophilicity. It is shown that the previously reported azide derivative 3, obtained from the reaction of 11 with DIAD, undergoes a Curtius-type rearrangement to lead to the fused cyclodiphosphazane [(CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2))P(OC(O-i-Pr)NN(CO(2)-i-Pr)N)](2) (28); this compound is in equilibrium with its monomeric form in solution at >300 K. Finally, reaction of S(6-t-Bu-4-Me-C(6)H(2)O)(2)P(OPh) (13) with DIAD gave the hexacoordinate compound S[6-t-Bu-4-Me-C(6)H(2)O](2)P(OPh)[N(CO(2)-i-Pr)NC(O-i-Pr)O] (30) with an intramolecular S-->P bond. X-ray crystallographic evidence for compounds 16, 19, 21, 22, 25, 27, 28, and 30 has been provided.     

Syntheses, structures and reactions of a series of beta-diketiminatoyttrium compounds

This paper describes the synthesis and selected reactions of a series of crystalline mono(beta-diiminato)yttrium chlorides , , , , , , and . The X-ray structure of each has been determined, as well as of [YCl()(2)] (), [Y()(2)OBu(t)] () and [Y{CH(SiMe(3))(2)}(thf)(mu-Cl)(2)Li(OEt(2))(2)(mu-Cl)](2) (). The N,N'-kappa(2)-beta-diiminato ligands were [{N(R)C(Me)}(2)CH](-) [R = C(6)H(4)Pr(i)-2 (); R = C(6)H(4)Bu(t)-2 (); R = C(6)H(3)Pr(i)(2)-2,6 ()], [{N(SiMe(3))C(Ph)}(2)CH)](-) () and [{N(C(6)H(3)Pr(i)(2)-2,6)C(H)}(2)CPh](-) (). Equivalent portions of Li[L(x)] and YCl(3) in Et(2)O under mild conditions yielded [Y(mu-Cl)(L(x))(mu-Cl)(2)Li(OEt(2))(2)](2) [L(x) = () or ()] and [Y(mu-Cl)()(mu-Cl)Li(OEt(2))(2)(mu-Cl)](2) () or its thf (instead of Et(2)O) equivalent . Each of the Li(OEt(2))(2)Cl(2) moieties is bonded in a terminal () or bridging () mode with respect to the two Y atoms; the difference is attributed to the greater steric demand of than or . Under slightly more forcing conditions, YCl(3) and Li() (via) gave the lithium-free complex [YCl(2)()(thf)(2)] (). Two isoleptic compounds and (having in place of in , and , respectively) were obtained from YCl(3) and an equivalent portion of K[] and Na[], respectively; under the same conditions using Na[], the unexpected product was [YCl()(2)] () (i.e. incorporating only one half of the YCl(3)). A further unusual outcome was in the formation of from and 2 Li[CH(SiMe(3))(2)]. Compound [Y(){N(H)C(6)H(3)Pr(i)(2)-2,6}(thf)(mu(3)-Cl)(2)K](2).4Et(2)O (), obtained from and K[N(H)C(6)H(3)Pr(i)(2)-2,6], is noteworthy among group 3 or lanthanide metal (M) compounds for containing MClKCl (M = Y) moieties.     

Facile synthesis of cyclopropene analogues of aluminum and an aluminum pinacolate, and the reactivity of LAl[eta(2)-C(2)(SiMe(3))(2)] toward unsaturated molecules (L=HC[(CMe)(NAr)](2), Ar=2,6-i-Pr(2)C(6)H(3))

Reduction of LAlI(2) (1) (L = HC[(CMe)(NAr)](2), Ar = 2,6-i-Pr(2)C(6)H(3)) with potassium in the presence of alkynes C(2)(SiMe(3))(2), C(2)Ph(2), and C(2)Ph(SiMe(3)) yielded the first neutral cyclopropene analogues of aluminum LAl[eta(2)-C(2)(SiMe(3))(2)] (3), LAl(eta(2)-C(2)Ph(2)) (4), and LAl[eta(2)-C(2)Ph(SiMe(3))] (5), respectively, whereas reduction of 1 in the presence of Ph(2)CO gave an aluminum pinacolate LAl[O(2)(CPh(2))(2)] (6), irrespective of the amount of Ph(2)CO employed. The unsaturated molecules CO(2), Ph(2)CO, and PhCN inserted into one of the Al-C bonds of 3 leading to ring enlargement to give novel aluminum five-membered heterocyclic systems LAl[OC(O)C(2)(SiMe(3))(2)] (7), LAl[OC(Ph)(2)C(2)(SiMe(3))(2)] (8), and LAl[NC(Ph)C(2)(SiMe(3))(2)] (9) in high yields. In contrast, 3 reacted with t-BuCN, 2,6-Trip(2)C(6)H(3)N(3) (Trip = 2,4,6-i-Pr(3)C(6)H(2)), and Ph(3)SiN(3) resulting in the displacement of the alkyne moiety to afford LAl[N(2)(Ct-Bu)(2)] (10) with an unprecedented aluminum-containing imidazole ring, and the first monomeric aluminum imides LAlNC(6)H(3)-2,6-Trip(2) (11) and LAlNSiPh(3) (12). All compounds have been characterized spectroscopically. The variable-temperature (1)H NMR studies of 3 and ESR measurements of 3 and 4 suggest that the Al-C-C three-membered-ring systems can be best described as metallacyclopropenes. The (27)Al NMR resonances of 2 and 3 are reported and compared. Molecular structures of compounds 3, 4, 6.OEt(2), 8.OEt(2), and 9 were determined by single-crystal X-ray structural analysis.     

Further characterization of Mitsunobu-type intermediates in the reaction of dialkyl azodicarboxylates with P(III) compounds

Structural characterization of compounds analogous to the proposed intermediates in the Mitsunobu esterification process is achieved by the combined use of NMR spectroscopy and X-ray diffractometric studies. The results show that compounds (t-BuNH)P(mu-N-t-Bu)(2)P[(N-t-Bu)(N-(CO(2)R)-N(H)(CO(2)R))] [R = Et (11), i-Pr (12)], obtained by treating [(t-Bu-NH)P-mu-N-t-Bu](2) (10) with diethylazodicarboxylate (DEAD) or diisopropylazodicarboxylate (DIAD), respectively, have a structure with the NH proton residing between the two nitrogen atoms ((P)N(t-Bu) and (P)N-N(CO(2)Et)); this is the tautomeric form of the expected betaine (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(NH-t-Bu)(N-(CO(2)R)-N(-)(CO(2)R)]. Treatment of ClP(mu-N-t-Bu)(2)P[(N-t-Bu){N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr)] (6) with 2,6-dicholorophenol affords (2,6-Cl(2)-C(6)H(3)-O)P(mu-N-t-Bu)(2)P(+)[(NH-t-Bu){N[(CO(2)i-Pr)(HNCO(2)i-Pr)]}](Cl(-))(2,6-Cl(2)-C(6)H(3)-OH) (14) that has a structure similar to that of (CF(3)CH(2)O)P(mu-N-t-Bu)(2)P(+)[(NH-t-Bu){N[(CO(2)i-Pr)(HNCO(2)i-Pr)]}](Cl(-)) (13), but with an additional hydrogen bonded phenol. Both of these have the protonated betaine structure analogous to that of Ph(3)P(+)N(CO(2)R)NH(CO(2)R)(R'CO(2))(-) (2) proposed in the Mitsunobu esterification. Two other compounds, (ArO)P(mu-N-t-Bu)(2)P(+)(NH-t-Bu){N(CO(2)i-Pr)(HNCO(2)i-Pr)}(Cl(-)) [Ar = 2,6-Me(2)C(6)H(3)O- (15) and 2-Me-6-t-Bu-C(6)H(3)-O- (16)], are also prepared by the same route. Although NMR tube reactions of 11 or 12 with tetrachlorocatechol, catechol, 2,2'-biphenol, and phenol revealed significant changes in the (31)P NMR spectra, attempted isolation of these products was not successful. On the basis of (31)P NMR spectra, the phosphonium salt structure (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)R)-N(H)(CO(2)R)](ArO(-)) is proposed for these. The weakly acidic propan-2-ol or water did not react with 11 or 12. Treatment of 12 with carboxylic acids/ p-toluenesulfonic acid gave the products (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr)](ArCO(2)(-)) [Ar = Ph (18), 4-Cl-C(6)H(4)CH(2) (19), 4-Br-C(6)H(4) (20), 4-NO(2)-C(6)H(4) (21)] and (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr)](4-CH(3)-C(6)H(4)SO(3)(-)) (22) that have essentially the same structure as 2. Compound 18 has additional stabilization by hydrogen bonding, as revealed by X-ray structure determination. Finally it is shown that the in situ generated (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)Et)-N(H)(CO(2)Et)](4-NO(2)-C(6)H(4)CO(2)(-)) can also effect Mitsunobu esterification. A comparison of the Ph(3)P-DIAD system with the analogous synthetically useful Ph(3)P-dimethyl acetylenedicarboxylate (DMAD) system is made.     

Cationic Rh complexes with novel spiro tetraarylpentaborate anions prepared from arylboronic acids and aryloxorhodium complexes

Ar-B(OH)2 (1a: Ar = C6H4OMe-4, 1b: Ar = C6H3Me2-2,6) react immediately with Rh(OC6H4Me-4)(PMe3)3 (2) in 5 : 1 molar ratio at room temperature to generate [Rh(PMe3)4]+[B5O6Ar4]- (3a: Ar = C6H4OMe-4, 3b: Ar = C6H3Me2-2,6). p-Cresol (92%/Rh), anisole (80%/Rh) and H2O (364%/Rh) are formed from 1a and 2. The reaction of 1a with 2 for 24 h produces [Rh(PMe3)4]+[B5O6(OH)4]- (4) as a yellow solid. This is attributed to hydrolytic dearylation of once formed 3a because the direct reaction of 3a with excess H2O forms 4. An equimolar reaction of 2 with phenylboroxine (PhBO)3 causes transfer of the 4-methylphenoxo ligand from rhodium to boron to produce [Rh(PMe3)4]+[B3O3Ph3(OC6H4Me-4)]- (5). Arylboronic acids 1a and 1b react with Rh(OC6H4Me-4)(PR3)3 (6: R = Et, 8: R = Ph) and with Rh(OC6H4Me-4)(cod)(PR3) (11: R = iPr, 12: R = Ph) to form [Rh(PR3)4]+[B5O6Ar4]- (7a: R = Et, Ar = C6H4OMe-4, 7b: R = Et, Ar = C6H3Me2-2,6, 9a: R = Ph, Ar = C6H3Me2-2,6) and [Rh(cod)(PR3)(L)]+[B5O6Ar4]- (13b: R = iPr, L = acetone, Ar = C6H3Me2-2,6, 14a: R = Ph, L = PPh3, Ar = C6H4OMe-4, 14b: R = Ph, L = PPh3, Ar = C6H3Me2-2,6), respectively. Hydrolysis of 14a yields [Rh(cod)(PPh3)2]+[B5O6(OH)4]- (15) quantitatively.     

Lithium aluminates on a molecular titanium oxide

Lithium aluminates Li[Al(O-2,6-Me(2)C(6)H(3))R'(3)] (R' = Et, Ph) react with the μ(3)-alkylidyne oxoderivative ligands [{Ti(η(5)-C(5)Me(5))(μ-O)}(3)(μ(3)-CR)] [R = H (1), Me (2)] to afford the aluminum-lithium-titanium cubane complexes [{R'(3)Al(μ-O-2,6-Me(2)C(6)H(3))Li}(μ(3)-O)(3){Ti(η(5)-C(5)Me(5))}(3)(μ(3)-CR)] [R = H, R' = Et (5), Ph (7); R = Me, R' = Et (6), Ph (8)]. Complex 7 evolves with the formation of a lithium dicubane species and a Li{Al(μ-O-2,6-Me(2)C(6)H(3))Ph(3)}(2)] unit.     

Reaction of vinyl chloride with late transition metal olefin polymerization catalysts

The reactions of vinyl chloride (VC) with representative late metal, single-site olefin dimerization and polymerization catalysts have been investigated. VC coordinates more weakly than ethylene or propylene to the simple catalyst (Me(2)bipy)PdMe(+) (Me(2)bipy = 4,4'-Me(2)-2,2'-bipyridine). Insertion rates of (Me(2)bipy)Pd(Me)(olefin)(+) species vary in the order VC > ethylene > propylene. The VC complexes (Me(2)bipy)Pd(Me)(VC)(+) and (alpha-diimine)Pd(Me)(VC)(+) (alpha-diimine = (2,6-(i)Pr(2)[bond]C(6)H(3))N[double bond]CMeCMe[double bond]N(2,6-(i)Pr(2)[bond]C(6)H(3))) undergo net 1,2 VC insertion and beta-Cl elimination to yield Pd[bond]Cl species and propylene. Analogous chemistry occurs for (pyridine-bisimine)MCl(2)/MAO catalysts (M = Fe, Co; pyridine-bisimine = 2,6-[(2,6-(i)Pr(2)[bond]C(6)H(3))N[double bond]CMe](2)-pyridine) and for neutral (sal)Ni(Ph)PPh(3) and (P[bond]O)Ni(Ph)PPh(3) catalysts (sal = 2-[C(H)[double bond]N(2,6-(i)Pr(2)-C(6)H(3))]-6-Ph-phenoxide; P[bond]O = [Ph(2)PC(SO(3)Na)[double bond]C(p-tol)O]), although the initial metal alkyl VC adducts were not detected in these cases. These results show that the L(n)MCH(2)CHClR species formed by VC insertion into the active species of late metal olefin polymerization catalysts undergo rapid beta-Cl elimination which precludes VC polymerization. Termination of chain growth by beta-Cl elimination is the most significant obstacle to metal-catalyzed insertion polymerization of VC.     

Synthesis, molecular structure and norbornene polymerization behavior of three-coordinate nickel(I) complexes with chelating anilido-imine ligands

Reaction of lithium salts of anilido-imine ligands bearing bulky substituentes on the nitrogen donor atoms with trans-chloro(phenyl)bis(triphenylphosphane)nickel(II) results in the formation of two rare three-coordinate nickel(I) complexes [(Ar1N=CHC6H4NAr2)Ni(I)PPh3] (1: Ar1 = Ar2 = 2,6-i-Pr2C6H3; 2: Ar1 = 2,6-Me2C6H3, Ar2 = 2,6-i-Pr2C6H3). The molecular structures of complexes 1 and 2 have been confirmed by single crystal X-ray analyses. These two complexes exhibit paramagnetic properties as measured by their EPR and 1H NMR spectra. After being activated with methylaluminoxane (MAO) these complexes could polymerize norbornene to afford addition-type polynorbornene (PNB) with high molecular weight M(w) (10(6) g mol(-1)), catalytic activities being high, up to 2.82 x 10(7) g(PNB) mol(-1)(Ni) h(-1).     

Reactivity of calix-tetrapyrrole SmII and SmIII complexes with acetylene: isolation of an "N-confused" calix-tetrapyrrole ring

The nature of the substituents present on the calix-tetrapyrrole tetra-anion ligand [[R2C(C4H2N)]4]4- (R = [-(CH2)5-]0.5, Et) determines the type of reactivity of the corresponding SmII compounds with acetylene. With R = [-(CH2)5-]0.5, dehydrogenation occurred to yield the nearly colorless dinuclear diacetylide complex [[[[-(CH2)5-]4-calix-tetrapyrrole]SmIII]2(mu-C2Li4)].THF as the only detectable reaction product. Conversely, with R = Et, acetylene coupling in addition to dehydrogenation resulted in the formation of a dimeric butatrienediyl enolate derivative [[(Et8-calix-tetrapyrrole)SmIII[Li[Li(thf)]2(mu-OCH=CH2)]]2(mu,eta2,eta'2-HC=C=C=CH)]. Reaction of the trivalent hydride [(Et8-calix-tetrapyrrole)(thf)SmIII[(mu-H)[Li(thf)]]2 or of the terminally bonded methyl derivative [(Et8-calix-tetrapyrrole)(CH3)SmIII[[Li(thf)]2[Li(thf)2](mu3-Cl)]] with acetylene resulted in a mixture of the carbide [[(Et8-calix-tetrapyrrole)SmIII]2(mu-C2Li4)].Et2O with the dimerization product [[(Et8-calix-tetrapyrrole)SmIII[Li[Li(thf)]2(mu3-OCH=CH2)]]2-mu,eta2,eta'2-HC=C=C=CH)]. The same reaction also yielded a third product, a trivalent complex [[(Et8-calix-tetrapyrrole)SmIII[Li(thf)2]]2], in which the macrocycle was isomerized by shifting the ring attachment of one of the four pyrrole rings.     

Acrylonitrile insertion reactions of cationic palladium alkyl complexes

The reactions of acrylonitrile (AN) with "L(2)PdMe+" species were investigated; (L(2) = CH(2)(N-Me-imidazol-2-yl)(2) (a, bim), (p-tolyl)(3)CCH(N-Me-imidazol-2-yl)(2) (b, Tbim), CH(2)(5-Me-2-pyridyl)(2) (c, CH(2)py'(2)), 4,4'-Me(2)-2,2'-bipyridine (d), 4,4'-(t)Bu(2)-2,2'-bipyridine (e), (2,6-(i)Pr(2)-C(6)H(3))N=CMeCMe=N(2,6-(i)Pr(2)-C(6)H(3)) (f)). [L(2)PdMe(NMe(2)Ph)][B(C(6)F(5))(4)] (2a-c) and [{L(2)PdMe}(2)(mu-Cl)][B(C(6)F(5))(4)] (2d-f) react with AN to form N-bound adducts L(2)Pd(Me)(NCCH=CH(2))(+) (3a-f). 3a-e undergo 2,1 insertion to yield L(2)Pd{CH(CN)Et}+, which form aggregates [L(2)Pd{CH(CN)Et}](n)(n)(+) (n = 1-3, 4a-e) in which the Pd units are proposed to be linked by PdCHEtCN- - -Pd bridges. 3f does not insert AN at 23 degrees C. 4a-e were characterized by NMR, ESI-MS, IR and derivatization to L(2)Pd{CH(CN)Et}(PR(3))+ (R = Ph (5a-e), Me (6a-c)). 4a,b react with CO to form L(2)Pd{CH(CN)Et}(CO)+ (7a,b). 7a reacts with CO by slow reversible insertion to yield (bim)Pd{C(=O)CH(CN)Et}(CO)+ (8a). 4a-e do not react with ethylene. (Tbim)PdMe+ coordinates AN more weakly than ethylene, and AN insertion of 3b is slower than ethylene insertion of (Tbim)Pd(Me)(CH(2)=CH(2))(+) (10b). These results show that most important obstacles to insertion polymerization or copolymerization of AN using L(2)PdR+ catalysts are the tendency of L(2)Pd{CH(CN)CH(2)R}+ species to aggregate, which competes with monomer coordination, and the low insertion reactivity of L(2)Pd{CH(CN)CH(2)R}(substrate)+ species.     

Oxidative addition of silanes R3SiH to the unsaturated cluster [Os3(micro-H)[micro3-Ph2PCH2PPh(C6H4)](CO)8]: evidence for reversible silane formation in the dynamic behaviour of [Os3(micro-H)(SiR3)(CO)9(micro-dppm)

Oxidative addition of the silanes R(3)SiH (R(3)= Ph(3), Et(3), EtMe(2)) to the unsaturated cluster [Os(3)(micro-H)[micro(3)-Ph(2)PCH(2)PPh(C(6)H(4))](CO)(8)] leads to the saturated clusters [Os(3)(micro-H)(SiR(3))(CO)(9)(micro-dppm)](SiR(3)= SiPh(3) 1, SiEt(3) 2 and SiEtMe(2)3) and the unsaturated clusters [Os(3)(micro -H)(2)(SiR(3))[micro(3)-Ph(2)PCH(2)PPh(C(6)H(4))](CO)(7)](SiR(3)= SiPh(3) 4, SiEt(3) 5 and SiEtMe(2)6). Structures are based on spectroscopic evidence and a XRD structure of [Os(3)(micro-H)(SiPh(3))(CO)(9)(micro-dppm)] 1 in which all non-CO ligands are coordinated equatorially and the hydride and the silyl groups are mutually cis. From variable-temperature (1)H NMR spectra of the SiEt(3) compound 2, exchange of the P nuclei is clearly apparent. Simultaneous migrations of the SiEt(3) group and of the hydride from one Os-Os edge to another generate a time-averaged mirror plane in the molecule. VT (1)H NMR spectra of the somewhat less bulky compound [Os(3)(micro-H)(SiMe(2)Et)(CO)(9)(micro-dppm)] 3 have been analysed. Two isomers 3a and 3b are observed with the hydride ligand located on different Os-Os edges. Synchronous migration of the hydride and SiMe(2)Et groups is faster than the observed interconversion of isomers which occurs by hydride migration alone. The synchronous motion of H and SiR(3)only occurs when these ligands are mutually cis as in the major isomer 3a and we propose that this process requires the formation of a transient silane complex of the type [Os(3)(eta(2)-HSiR(3))(CO)(9)(micro-dppm)]. Turnstile rotation within an Os(CO)(3)(eta(2)-HSiR(3)) group leads to the observed exchange within the major isomer 3a without exchange with the minor isomer. This process is not observed for the minor isomer 3b because the hydride and the silyl group are mutually trans. Protonation to give [Os(3)(micro-H)(2)(SiR(3))(CO)(9)(micro-dppm)](+) totally suppresses the dynamic behaviour because there are no edge vacancies.     

Facile Ni(II)/ketoxime-mediated conversion of organonitriles into imidoylamidine ligands. Synthesis of imidoylamidines and acetyl amides

Treatment of alkyl nitriles with NiX(2).6H(2)O (X = Cl, NO(3)) and 2-propanone oxime, followed by (X = Cl) addition of [i-Pr(4)N](NO(3)) for precipitation of the product, resulted in the formation of amidinium nitrates [RC([double bond]NH(2))NH(2)](NO(3)) (R = Me, Et, n-Pr). The reaction went to another direction with NiX(2).2H(2)O, i.e., the reaction between neat RCN (R = Me, Et, n-Pr, i-Pr, n-Bu, CH(2)Cl, CH(2)C(6)H(4)OMe-p) and NiCl(2).2H(2)O/2-propanone oxime (other ketoximes can also be used) gave the (imidoylamidine)Ni(II) complexes [Ni[N(H)[double bond]C(R)NHC(R)[double bond]NH](2)](2+) (1(2+)-7(2+)). The latter were isolated in good yields (65-91%) as the bis-chloride salts 1.Cl(2)-6.Cl(2) and the mixed salt 7.(Cl)(p-MeOC(6)H(4)CH(2)CO(2)). Remarkably, the latter transformation does not proceed at all if NiCl(2).2H(2)O or the ketoxime are taken alone. Liberation of imidoylamidines was performed for one alkyl-containing complex [2.Cl(2)] and one benzyl-containing complex [7.(Cl)(p-MeOC(6)H(4)CH(2)CO(2))], by (i) addition of HBF(4).Et(2)O to the acetonitrile solution of the complexes to yield [N(H)[double bond]C(R)NHC(R)[double bond]NH].2HBF(4) (R = Et 8 and R = CH(2)C(6)H(4)OMe-p 9) or (ii) substitution for ethanediamine (en) with following precipitation of the complex [Ni(en)(3)]Cl(2) with formation of free N(H)[double bond]C(R)NHC(R)[double bond]NH (R = Et 10 and R = CH(2)C(6)H(4)OMe-p 11). In contrast to the liberation in nonaqueous media, treatment of 2.Cl(2) and 7.(Cl)(p-MeOC(6)H(4)CH(2)CO(2)) with Na(2)EDTA.2H(2)O in water-methanol solutions led to substitution and hydrolysis to furnish the acyl amides [EtC([double bond]O)](2)NH (12) and [p-MeOC(6)H(4)CH(2)C([double bond]O)](2)NH (13). Alternatively, 12 and 13 were obtained by hydrolysis of 10 and 11 in water at pH ca. 8.5. It was shown that the oxime complexes trans-[NiCl(2)(C(4)H(8)C[double bond]NOH)(4)] (14) or cis-[Ni(O,O-NO(3))(2)(C(4)H(8)C[double bond]NOH)(2)] (15) can be intermediates in the formation of amidines and imidoylamidines. The sequence of the Ni(II)/oxime mediated formation of (imidoylamidine)Ni complexes and liberation (or hydrolytic liberation) of the ligands opens up a novel, facile and environmentally benign route to imidoylamidines and acyl amides.     

Synthesis and characterization of a new family of square-planar nickel(II) carbonyl derivatives

The reaction of [NBu(4)](2)[Ni(C(6)F(5))(4)] (1) with solutions of dry HCl(g) in Et(2)O results in the protonolysis of two Nibond;C(6)F(5) bonds giving [NBu(4)](2)[[Ni(C(6)F(5))(2)](2)(mu-Cl)(2)] (2 a) together with the stoichiometrically required amount of C(6)F(5)H. Compound 2 a reacts with AgClO(4) in THF to give cis-[Ni(C(6)F(5))(2)(thf)(2)] (3). Reacting 3 with phosphonium halides, [PPh(3)Me]X, gives dinuclear compounds [PPh(3)Me](2)[[Ni(C(6)F(5))(2)](2)(mu-X)(2)] (X=Br (2 b) or I (2 c)). Solutions of compounds 2 in CH(2)Cl(2) at 0 degrees C do not react with excess CNtBu, but do react with CO (1 atm) to split the bridges and form a series of terminal Ni(II) carbonyl derivatives with general formula Qcis-[Ni(C(6)F(5))(2)X(CO)] (4). The nu(CO) stretching frequencies of 4 in CH(2)Cl(2) solution decrease in the order Cl (2090 cm(-1))>Br (2084 cm(-1))>I (2073 cm(-1)). Compounds 4 revert to the parent dinuclear species 2 on increasing the temperature or under reduced CO pressure. [NBu(4)]cis-[Ni(C(6)F(5))(2)Cl(CO)] (4 a) reacts with AgC(6)F(5) to give [NBu(4)][Ni(C(6)F(5))(3)(CO)] (5, nu(CO)(CH(2)Cl(2))=2070 cm(-1)). Compound 5 is also quantitatively formed ((19)F NMR spectroscopy) by 1:1 reaction of 1 with HCl(Et(2)O) in CO atmosphere. Complex 3 reacts with CO at -78 degrees C to give cis-[Ni(C(6)F(5))(2)(CO)(2)] (6, nu(CO)(CH(2)Cl(2))=2156, 2130 cm(-1)), which easily decomposes by reductive elimination of C(6)F(5)bond;C(6)F(5). Compounds 3 and 6 both react with CNtBu to give trans-[Ni(C(6)F(5))(2)(CNtBu)(2)] (7). The solid-state structures of compounds 3, 4 b, 6, and 7 have been established by X-ray diffraction methods. Complexes 4-6 are rare examples of square-planar Ni(II) carbonyl derivatives.     

Polymerization of methyl methacrylate catalyzed by nickel complexes with hydroxyindanone-imine ligands

A series of new hydroxyindanone-imine ligands [PhN=CC2H3(CH3)C6H2(CH3)OH] (HL1) and [ArN=CC2H3(CH3)C6H2(R)OH] (Ar = 2,6-i-Pr(2)C(6)H(3), R = Me (HL2), R = H (HL3), and R = Cl (HL4)) were synthesized and characterized. Reactions of hydroxyindanone-imines with Ni(OAc)(2).4H(2)O result in the formation of the trinuclear hexa(indanone-iminato)tri(nickel(II)) complex Ni(3)[PhN=CC2H3(CH3)C6H2(CH3)O](6) (1) and the mononuclear bis(indanone-iminato)nickel(II) complexes Ni[ArN=CC2H3(CH3)C6H2(R)O](2) (Ar = 2,6-i-Pr(2)C(6)H(3), R = Me (2), R = H (3), and R = Cl (4)). All nickel complexes were characterized by their IR, NMR spectra and elemental analyses. In addition, X-ray structure analyses were performed for complexes 1 and 2. After being activated with methylaluminoxane (MAO), these nickel(II) complexes can be used as catalysts for the polymerization of methyl methacrylate (MMA) to produce syndiotactic-rich PMMA. Catalytic activities and the degree of syndiotacticity of PMMA have been investigated for various reaction conditions.     

Nickel(II) hydride and fluoride pincer complexes and their reactivity with Lewis acids BX3·L (X = H, L = thf; X = F, L = Et2O)

Reaction of the pincer hydride complex ((tBu)PCP)Ni(H) [(tBu)PCP = 2,6-C(6)H(3)(CH(2)P(t)Bu(2))(2)] with BH(3)·thf in THF at 190 K generates the corresponding borohydride complex ((tBu)PCP)Ni(BH(4)). The kinetically stable (but thermodynamically unstable) species undergoes reversible borane loss. The related fluoride complex ((tBu)PCP)Ni(F) shows the same reactivity towards BF(3)·Et(2)O, producing ((tBu)PCP)Ni(BF(4)) as the main final product. The processes were followed through multinuclear NMR spectroscopy and DFT calculations, at the M06//6-31+G(d,p) level of theory.