Resistance of surface-confined telomers with pendent glucosylurea groups against non-specific adsorption of proteins

A disulfide-carrying random telomer with pendent d-glucosylurea groups (Cys-poly(glucosylureaethyl methacrylate-r-ureaethyl methacrylate), Cys-Poly(GUMA-r-UMA)) was obtained by UV-irradiation of GUMA and UMA in the presence of benzyl N,N-diethyldithiocarbamoyl (BDC) derivative which shows the abilities of initiation, transfer, and termination (iniferter). The disulfide-carrying telomer was accumulated on a gold electrode and colloidal gold-immobilized glass substrate, and the binding of various proteins to the surface of the polymer brush was examined by both cyclic voltammetry (CV) with hydroquinone as a probe, and localized surface plasmon resonance (LSPR) absorption method. The Cys-Poly(GUMA-r-UMA) brush did not show a significant non-specific adsorption of proteins such as bovine serum albumin and egg white lysozyme. Furthermore, sugar binding proteins, concanavalin A (with an affinity for mannose and glucose) and wheat germ agglutinin (with an affinity for N-acetylglucosamine), were only slightly adsorbed to the GUMA-carrying brush, which is in contrast with the prompt and distinct binding of these proteins to the brushes composed of 2-methacryloyloxyethyl d-glucopyranoside and 1-(6′-methacrylamido)hexyl-2-N-acetoamido-2-deoxy-d-glucopyranoside, respectively. The glucosylurea group-carrying telomer brush prepared here might be useful to provide a “bio-inert” surface in bio-medical fields.     

Sensing capabilities of colloidal gold modified with a self-assembled monolayer of a glucose-carrying polymer chain on a glass substrate

A disulfide-carrying polymer with pendent glucose residues (poly(2-methacryloyloxyethyl D-glucopyranoside)) was obtained by using a benzyl N,N-diethyldithiocarbamoyl derivative which shows the abilities of initiation, chain transfer, and termination (iniferter). The disulfide-carrying polymer was accumulated on a colloidal Au-immobilized glass substrate, and the usefulness of the polymer as a sensing element of concanavalin A (Con A) was examined by using a UV-visible spectrophotometer with the help of surface plasmon resonance. The sensor showed a concentration-dependent specific binding of Con A with a detection limit of 1.9 nM, and furthermore, it had a very high stability at high ionic strength. The polymer-coated device examined here was not only useful as a simple biosensor chip but is also expected to expand our knowledge of interfacial phenomena by introducing various functional polymers on colloidal Au.     

Colorimetric detection of Ricinus communis Agglutinin 120 using optimally presented carbohydrate-stabilised gold nanoparticles

Ricin is a toxic lectin which presents a potential security threat. Its rapid detection is highly desirable. Here we present a colorimetric bioassay based on the aggregation of carbohydrate-stabilised gold nanoparticles which has been used to detect Ricinus communis Agglutinin 120 (RCA(120)) - a ricin surrogate. To achieve a stable and robust sensing system the anchor chain length and the density of the assembled carbohydrates on the gold particle surface has been examined to determine the optimal coverage for maximal aggregation with both RCA(120) and Concanavalin A (Con A) lectins. Gold nanoparticles were stabilised with either a thiolated galactose derivative (9-mercapto-3,6-diaoxaoctyl-beta-d-galactoside) or a thiolated mannose derivative (9-merapto-3,6-dioxaoctyl-alpha-d-mannoside), for RCA(120) and Con A respectively, diluted in each instance with varying ratios of a thiolated triethylene glycol derivative. Aggregation was induced with the respective cognate lectin with the reaction monitored by UV-visible spectrophotometry. The results obtained show that a particle surface with at least 7.5% galactose is required for aggregation with RCA(120) and 6% mannose coverage is required for aggregation with Con A. For each lectin the sensitivity of the assay could be controlled by adjustment of the carbohydrate density on the gold nanoparticles, but with differing results. Maximal aggregation with Con A was achieved with a monolayer consisting of 100% mannose, whereas for RCA(120) maximal aggregation occurred with 70% coverage of galactose. The limit of detection for RCA(120) using the optimally presented galactose-stabilised nanoparticles was 9 nM.     

金表面聚合物刷及图案化微结构的制备

采用表面引发室温原子转移自由基聚合(ATRP)方法在金基底上原位制备了接枝聚合物刷,其制备过程用厚度测量,ATR-FTIR,XPS等进行了表征,初始时聚合物刷的厚度随着聚合时间的增加线性增加,表现为活性聚合的特征．XPS表征证明表面引发聚合后聚合物刷末端仍然存在ATRP反应的引发剂．紫外光刻图案化的聚合物刷作为电沉积的模板,经电沉积、后紫外处理、湿化学刻蚀步骤后得到了分离的导电聚合物微阵列结构,通过浇注／粘附处理将导电聚合物微阵列转移至硅油弹性体片,由于导电聚合物在湿化学刻蚀中对基底金具有良好的保护作用,因此在导电聚合物阵列被转移后,基底表面得到金微阵列。     

Binding of Ricinus communis agglutinin to a galactose-carrying polymer brush on a colloidal gold monolayer

A polymer with many pendent galactose residues was prepared by atom-transfer radical polymerization (ATRP) of galactose-carrying vinyl monomer, 2-lactobionamidoethyl methacrylate (LAMA), with a disulfide-carrying ATRP initiator, 2-(2'-bromoisobutyroyl)ethyl disulfide (DT-Br). The galactose-carrying polymer obtained (DT-PLAMA) was accumulated as a polymer brush via Au-S bond on a colloidal gold monolayer deposited on a cover glass. For comparison, a disulfide which carried one galactose residue at both ends (2-lactobionamidoethyl disulfide, Cys-Lac) was accumulated as a self-assembled monolayer (SAM) on the colloidal gold monolayer, too. The association and dissociation processes of galactose residues on the colloidal gold with a lectin, Ricinus communis agglutinin (RCA(120)), were observed by the increase and decrease in absorbance at 550nm corresponding to localized surface plasmon resonance (LSPR) phenomena. The Cys-Lac SAM-carrying glass chip showed a strong non-specific adsorption of the lectin, whereas the DT-PLAMA brush-carrying one reversibly associated with the lectin, indicating reusability of the latter device. The apparent association constant of the lectin with the galactose residues in the DT-PLAMA brush was much larger than the association constant for free galactose, and the detection limit of RCA(120) by the glycopolymer brush-modified device was satisfactorily low. Furthermore, a microscopic observation clearly indicated that the DT-PLAMA brush could reversibly associate with a HepG2 cell having galactose receptors, though these processes could not be observed spectrophotometrically due to a gigantic size of the cell.     

Convectively assembled nonspherical mushroom cap-based colloidal crystals

Monolayers from mushroom cap-shaped polymer colloids were fabricated by a vertical substrate deposition technique. As confirmed by SEM and autocorrelation analysis, the monolayers show long-range hexagonal packing with particle orientational freedom restricted to either "heads up" or "heads down" alignment with respect to the substrate. The monolayers are modeled as a 2D diffraction grating and were studied with selected area laser diffraction. The stacking of ordered monolayers into the third dimension was achieved via layer-by-layer deposition. Convective assembly is shown as a viable approach to the large-scale crystallization of monodisperse nonspherical colloids.     

12-Mercaptododecyl β-maltoside-modified gold nanoparticles: specific ligands for concanavalin A having long flexible hydrocarbon chains

A simple and highly specific protein detection system using glycoconjugated gold nanoparticles was investigated. This system was based on the aggregation of gold nanoparticles coated with carbohydrate alkanethiols in the presence of corresponding proteins (lectins) that had specific recognition for certain carbohydrates. In order to construct an efficient specific recognition system, maltoside alkanethiol was adopted as an effective sensing modifier having a disaccharide group and a flexible long alkyl chain. The surface modification of gold nanoparticles with maltoside alkanethiol resulted in a shift and broadening (from 520 to 610 nm) of the absorption peak. Monodispersed maltoside-adsorbed gold nanoparticles aggregated with the specific lectin, concanavalin A (Con A). This phenomenon was used to detect the presence of Con A and to estimate concentrations of Con A in sample solutions. The precipitate of the maltoside–gold nanoparticle–Con A mixture was redispersed by addition of methyl α-D-mannopyranoside whose adsorption coefficient is larger than that of maltoside with Con A.     

Evaluation of particle deposition in aqueous solutions by the quartz crystal microbalance method

Concerning the redeposition of particulate soils in the detergent process, particle deposition onto substrates in aqueous solutions was investigated by the application of the quartz crystal microbalance (QCM) technique, and the effects of the kinds of the particle and substrate and the addition of ethanol were discussed by the extended DLVO theory. The film of polyethylene, Nylon 6 or cellulose acetate as a substrate was prepared on the gold electrode of the QCM by a spin-coating method. The electrode with or without the polymer film was perpendicularly immersed in the aqueous dispersion of spherical polyethylene or nylon particles. The total mass of particles deposited onto the electrode was determined, in situ, from frequency change of the QCM. The deposited mass was also determined from the difference in frequency measured in air before and after the immersion in the dispersion. In both cases, the particle deposition increased with immersion time and attained apparent equilibrium after 30–60 min. Apparent equilibrium deposition was large for the polyethylene particle compared with the Nylon 12 particle. For either particle, a considerable difference in the deposited amount was observed among the substrates. In all systems, the particle deposition drastically decreased by addition of ethanol to the aqueous dispersion. The results were discussed in terms of the electrical double layer, the Lifshitz–van der Waals and acid–base interactions between the particle and the substrate, which were calculated using the experimentally determined surface free energy components and electrokinetic potentials.     

Development of a biologically relevant calcium phosphate substrate for sum frequency generation vibrational spectroscopy

A novel biologically relevant composite substrate has been prepared consisting of a calcium phosphate (CaP) layer formed by magnetron sputter-coating from a hydroxyapatite (HA) target onto a gold-coated silicon substrate. The CaP layer is intended to mimic tooth and bone surfaces and allows polymers used in oral care to be deposited in a procedure analogous to that used for dental surfaces. The polymer cetyl dimethicone copolyol (CDC) was deposited onto the CaP surface of the substrate by Langmuir Blodgett deposition, and the structure of the adsorbed layer was investigated by the surface specific technique of sum frequency generation (SFG) vibrational spectroscopy. The gold sublayer provides enhancement of the SFG signal arising from the polymer but plays no part in the adsorption of the polymer. The surface morphology of the substrate was investigated using SEM and AFM. The surface roughness was commensurate with that of the thermally evaporated gold sublayer and uniform over areas of at least 36 mum(2). The chemical composition of the CaP-coated surface was determined by FTIR and TOF-SIMS. It was concluded that the surface is primarily calcium phosphate present as a mixture of amorphous, non-hydroxylated phases rather than solely stoichiometric hydroxyapatite. The SFG spectra from CDC on CaP were closely similar, both in resonance wavenumbers and in their relative intensities, with spectra of thin films of CDC recorded directly on gold. Application of previous analysis of the spectra of CDC on gold therefore enabled interpretation of the polymer orientation and conformation on the CaP substrate.     

Gold nanoparticle/polymer nanocomposites: dispersion of nanoparticles as a function of capping agent molecular weight and grafting density

The dispersion of polymer-covered gold nanoparticles in high molecular weight (MW) polymer matrixes is reported. Complete particle dispersion was achieved for PS125-Au in the polystyrene (PS) matrixes studied (up to and including Mn = 80 000 g/mol). PS19-Au, on the other hand, exhibits complete dispersion in a low MW PS matrix (Mn = 2000 g/mol) but only partial dispersion in higher MW matrixes (up to 80 000 g/mol). Similarly, PEO45-Au is fully dispersed in a low MW poly(ethylene oxide) (PEO) matrix (Mn = 1000 g/mol) but only partially in a higher MW PEO matrix (Mn = 15 000 g/mol). Wetting of the polymer-Au brushes by the polymer matrix is associated with dispersibility. Theory predicts that, for dense polymer brushes, wetting is achieved when the MW of the polymer brush equals (and is greater than) that of the polymer matrix. The observed partial dispersion of the PS19-Au and PEO45-Au nanoparticles in matrixes whose MW is greater than the brush MW is attributable to the existence of a high volume fraction of voids within the brush. These voids arise from the unique geometry of the nanoparticle surface arising from the juxtaposed facets of the gold nanoparticle. PS125-Au brushes are wetted by PS matrixes whose degree of polymerization is larger than 125, probably because of their lower grafting density on the gold core or the high fraction of void volumes caused by the facets on the gold cores. Dispersion thus occurs when the matrix MW is greater than that of the brush.     

Mixed polymer brushes by sequential polymer addition: anchoring layer effect

Smart surfaces can be described as surfaces that have the ability to respond in a controllable fashion to specific environmental stimuli. A heterogeneous (mixed) polymer brush (HPB) can provide a synthetic route to designing smart polymer surfaces. In this research we study HPB comprised of end-grafted polystyrene (PS) and poly(2-vinyl pyridine) (P2VP). The synthesis of the HPB involves the use of an "intermolecular glue" acting as a binding/anchoring interlayer between the polymer brush and the substrate, a silicon wafer. We compare anchoring layers of epoxysilane (GPS), which forms a self-assembled monolayer with epoxy functionality, to poly(glycidyl methacrylate) (PGMA), which forms a macromolecular monolayer with epoxy functionality. The PS and P2VP were deposited onto the wafers in a sequential fashion to chemically graft PS in a first step and subsequently graft P2VP. Rinsing the HPB in selective solvents and observing the change in water contact angle as a function of the HPB composition studied the switching nature of the HPB. Scanning probe microscopy was used to probe the topography and phase imagery of the HPB. The nature of the anchoring layer significantly affected the wettability and morphology of the mixed brushes.     

Interaction of wheat germ agglutinin with an N-acetylglucosamine-carrying telomer brush accumulated on a colloidal gold monolayer

A disulfide-carrying telomer with many pendent N-acetylglucosamine (GlcNAc) residues (Cys-PMHGlcNAc) was obtained by photo-polymerization of 1-(6'-methacryloylaminohexyl)-2-N-acetoamido-2-deoxy d-glucopyranoside) (MHGlcNAc) using a benzyl N,N-diethyldithiocarbamoyl (BDC) derivative that shows abilities of initiation, transfer, and termination (iniferter). The disulfide-carrying telomer was accumulated on a monolayer of colloidal Au on a glass substrate, and the interaction of wheat germ agglutinin (WGA) with GlcNAc residue at the polymer brush-solution interface was examined by using the localized surface plasmon resonance (LSPR) technique. For comparison, an amphiphile carrying many pendent GlcNAc residues was also prepared with MHGlcNAc and a lipophilic radical initiator and was incorporated in a phospholipid liposome to examine interaction of the GlcNAc residue with WGA on the liposome surface using turbidity measurements. Both the colloidal gold optical device and the liposome showed a concentration-dependent specific binding of WGA, and the GlcNAc-carrying liposome had a detection limit of 100 nM for WGA, whereas that of the colloidal gold device was 10nM. The sugar-carrying telomer-coated device examined here is not only useful as a simple biosensor chip but is also expected to expand our knowledge of bio-related phenomena at the liquid-telomer brush interfaces on a colloidal Au.     

Fuzzy ternary particle systems by surface-initiated atom transfer radical polymerization from layer-by-layer colloidal core-shell macroinitiator particles

We report the synthesis of ternary polymer particle material systems composed of (a) a spherical colloidal particle core, coated with (b) a polyelectrolyte intermediate shell, and followed by (c) a grafted polymer brush prepared by surface-initiated polymerization as the outer shell. The layer-by-layer (LbL) deposition process was utilized to create a functional intermediate shell of poly(diallyl-dimethylammonium chloride)/poly(acrylic acid) multilayers on the colloid template with the final layer containing an atom transfer radical polymerization (ATRP) macroinitiator polyelectrolyte. The intermediate core-shell architecture was analyzed with FT-IR, electrophoretic mobililty (zeta-potential) measurements, atomic force microscopy, and transmission electron microscopy (TEM) techniques. The particles were then utilized as macroinitiators for the surface-initiated ATRP grafting process for poly(methyl methacrylate) polymer brush. The polymer grafting was confirmed with thermo gravimetric analysis, FT-IR, and TEM. The polymer brush formed the outermost shell for a ternary colloidal particle system. By combining the LbL and surface-initiated ATRP methods to produce controllable multidomain core-shell architectures, interesting functional properties should be obtainable based on independent polyelectrolyte and polymer brush behavior.     

Single ion diffusive transport within a Poly(styrene sulfonate) polymer brush matrix probed by fluorescence correlation spectroscopy

Diffusive transport within complex environments is a critical piece of the chemistry occurring in such diverse membrane systems as proton exchange and bilayer lipid membranes. In the present study, fluorescence correlation spectroscopy was used to evaluate diffusive charge transport within a strong polyelectrolyte polymer brush. The fluorescent cation rhodamine-6G was used as a counterion probe molecule, and the strong polyelectrolyte poly(styrene sulfonate) was the polymer brush. Such strong polyelectrolyte brushes show promise for charge storage applications, and thus it is important to understand and tune their transport efficiencies. The polymer brush demonstrated preferential solvation of the probe counterion as compared to solvation by the aqueous solvent phase. Additionally, diffusion within the polymer brush was strongly inhibited, as evidenced by a decrease in diffusion constant of 4 orders of magnitude. It also proved possible to tune the transport characteristics by controlling the solvent pH, and thus the ionic strength of the solvent. The diffusion characteristics within the charged brush system depend on the brush density as well as the effective interaction potential between the probe ions and the brush. In response to changes in ionic strength of the solution, it was found that these two properties act in opposition to each other within this strong polyelectrolyte polymer brush environment. A stochastic random walk model was developed to simulate interaction of a diffusing charged particle with a periodic potential, to show the response of characteristic diffusion times to electrostatic field strengths. The combined results of the experiments and simulations demonstrate that responsive diffusion characteristics in this brush system are dominated by changes in Coulombic interactions rather than changes in brush density. More generally, these results support the use of FCS to evaluate local charge transport properties within polyelectrolyte brush systems, and demonstrate that the technique shows promise in the development of novel polyelectrolyte films for charge storage/transport materials.     

Selective recognition of ovalbumin using a molecularly imprinted polymer

Micro-contact imprinting has been used to form thin-film molecular imprints of ovalbumin (OVA) in polymers supported on glass slides. Thermocalorimetric data was used to optimise the choice of functional monomer and cross-linker to maximise selectivity and minimise non-specific recognition.A polymer comprising polyethyleneglycol 400 dimethacrylate (95 vol.%) and methacrylic acid (5 vol.%) showed both maximum recognition for OVA when made as a molecularly imprinted polymer (MIP), and minimal recognition when made as a non-imprinted, i.e. control polymer. OVA rebinding to the molecularly imprinted polymer, from a buffered 2 µM OVA solution, was 1.55 × 10^{− 11} mol cm^{− 2}, while the control polymer showed 10-fold less re-binding, i.e. 0.154 × 10^{− 11} mol cm^{− 2}.Experiments in which human serum albumin (HSA), conalbumin, ovomucoid or lysozyme, were re-bound to the polymers, either as single proteins or in competition with OVA, showed them to have low affinity for the polymer formulation used. Of the competing proteins examined, in non-competitive binding experiments, HSA showed the greatest affinity 0.45 × 10^{− 11} mol cm^{− 2} for the OVA imprinted polymer. In two protein competition experiments, i.e. with OVA and a competing protein present at equal concentrations (2 µM), OVA binding to the OVA imprinted polymer was in all cases significantly greater than that of the competitor.     

Improvement of wettability and detergency of polymeric materials by excimer UV treatment

The 172 nm ultraviolet (UV) excimer light was exposed to polyethylene (PE), polypropylene, poly(ethylene terephthalate) and nylon 6 surfaces in ambient air. Changes in the contact angle and particle deposition in liquid due to UV treatment were investigated from the viewpoints of wettability and detergency. For all polymers, the wettability and the acid-base component of the surface free energy evaluated by the contact angle measurements increased remarkably by UV treatment of 1 min. From surface analyses of the polymer surfaces by X-ray photoelectron spectroscopy and atomic force microscopy, oxygen concentration was found to increase after UV treatment, whereas little topographical change was observed. The deposition of PE and nylon 12 particles onto the polymer surface was examined, in situ, in water, water/ethanol mixture, ethanol and n-heptane. Although the number of deposited particles was largely dependent on the kinds of the particle, the substrate and the liquid, a significant decrease in the deposition due to UV treatment was confirmed in any system.     

A physical approach to specifically improve the mobility of alkane liquid drops

Seamless control of resistance to liquid drop movement for polar (water) and nonpolar alkane (n-hexadecane, n-dodecane, and n-decane) probe liquids on substrate surfaces was successfully demonstrated using molten linear poly(dimethylsiloxane) (PDMS) brush films with a range of different molecular weights (MWs). The ease of movement of liquid drops critically depended on polymer chain mobility as it relates to both polymer MW and solvent swelling on these chemically- and topographically identical surfaces. Our brush films therefore displayed lower resistances to liquid drop movement with decreasing polymer MW and surface tension of probe liquid as measured by contact angle (CA) hysteresis and tilt angle measurements. Subsequently, while mobility of water drops was inferior and became worse at higher MWs, n-decane drops were found to experience little resistance to movement on these polymer brush films. Calculating CA hysteresis as Δθ(cos) = cos θ(R) - cos θ(A) (θ(A) and θ(R) are the advancing and receding CAs, respectively) rather than the standard Δθ = θ(A) - θ(R) was found to be advantageous for estimation of the actual dynamic dewetting behavior of various probe liquids on an inclined substrate.     

In Situ Formation of Gold Nanoparticles within a Polymer Particle and Their Catalytic Activities in Various Chemical Reactions

Composite materials consisting of nanoscale gold particles and protective polymer shells were designed and tested as catalysts in various chemical reactions. Initially, the systematic incorporation of multiple gold nanoparticles into a poly(N-isopropylacrylamide) particle was achieved by an in situ method under light irradiation. The degree of gold nanoparticle loading, along with the structural and morphological properties, was examined as a function of the amount of initial gold ions and reducing agent. As these gold nanoparticles were physically-embedded within the polymer particle in the absence of strong interfacial interactions between the gold nanoparticles and polymer matrix, the readily-accessible surface of the gold nanoparticles with a highly increased stability allowed for their use as recyclable catalysts in oxidation, reduction, and coupling reactions. Overall, the ability to integrate catalytically-active metal nanoparticles within polymer particles in situ allows for designing novel composite materials for multi-purpose catalytic systems.     

Structure and collapse of a surface-grown strong polyelectrolyte brush on sapphire

We have used neutron reflectometry to investigate the behavior of a strong polyelectrolyte brush on a sapphire substrate, grown by atom-transfer radical polymerization (ATRP) from a silane-anchored initiator layer. The initiator layer was deposited from vapor, following treatment of the substrate with an Ar/H(2)O plasma to improve surface reactivity. The deposition process was characterized using X-ray reflectometry, indicating the formation of a complete, cross-linked layer. The brush was grown from the monomer [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC), which carries a strong positive charge. The neutron reflectivity profile of the swollen brush in pure water (D(2)O) showed that it adopted a two-region structure, consisting of a dense surface region ～100 ? thick, in combination with a diffuse brush region extending to around 1000 ? from the surface. The existence of the diffuse brush region may be attributed to electrostatic repulsion from the positively charged surface region, while the surface region itself most probably forms due to polyelectrolyte adsorption to the hydrophobic initiator layer. The importance of electrostatic interactions in maintaining the brush region is confirmed by measurements at high (1 M) added 1:1 electrolyte, which show a substantial transfer of polymer from the brush to the surface region, together with a strong reduction in brush height. On addition of 10(-4) M oppositely charged surfactant (sodium dodecyl sulfate), the brush undergoes a dramatic collapse, forming a single dense layer about 200 ? in thickness, which may be attributed to the neutralization of the monomers by adsorbed dodecyl sulfate ions in combination with hydrophobic interactions between these dodecyl chains. Subsequent increases in surfactant concentration result in slow increases in brush height, which may be caused by stiffening of the polyelectrolyte chains due to further dodecyl sulfate adsorption.     

Wetting transition on hydrophobic surfaces covered by polyelectrolyte brushes

We study the wetting by water of complex "hydrophobic-hydrophilic" surfaces made of a hydrophobic substrate covered by a hydrophilic polymer brush. Polystyrene (PS) substrates covered with polystyrene- block-poly(acrylic acid) PS- b-PAA diblock copolymer layers were fabricated by Langmuir-Schaefer depositions and analyzed by atomic force microscopy (AFM) and ellipsometry. On bare PS substrate, we measured advancing angles theta A = 93 +/- 1 degrees and receding angles theta R = 81 +/- 1 degrees . On PS covered with poorly anchored PS- b-PAA layers, we observed large contact angle hysteresis, theta A approximately 90 degrees and theta R approximately 0 degrees , that we attributed to nanometric scale dewetting of the PS- b-PAA layers. On well-anchored PS- b-PAA layers that form homogeneous PAA brushes, a wetting transition from partial to total wetting occurs versus the amount deposited: both theta A and theta R decrease close to zero. A model is proposed, based on the Young-Dupre equation, that takes into account the interfacial pressure of the brush Pi, which was determined experimentally, and the free energy of hydration of the polyelectrolyte monomers Delta G PAA (hyd), which is the only fitting parameter. With Delta G PAA (hyd) approximately -1300 J/mol, the model renders the wetting transition for all samples and explains why the wetting transition depends mainly on the average thickness of the brush and weakly on the length of PAA chains.