Application of aryloximes as solid-phase ketone linkers

In both solution and the solid phase, a variety of ketone oxime anions have been treated with 4-substituted-2-fluorobenzonitriles to give the corresponding nucleophilic aromatic substitution aryloxime adducts. Under aqueous acidic conditions, these adducts underwent cyclization to give the corresponding ketones. Suzuki and amide coupling reactions were also successfully performed on two resin-bound oximes followed by subsequent cyclorelease to give ketone product in good yields and purities. [reaction--see text]     

Comparative investigation of the cleavage step in the synthesis of model peptide resins: implications for Nalpha-9-fluorenylmethyloxycarbonyl-solid phase peptide synthesis

Based on our studies of the stability of model peptide-resin linkage in acid media, we previously proposed a rule for resin selection and a final cleavage protocol applicable to the Nalpha-tert-butyloxycarbonyl (Boc)-peptide synthesis strategy. We found that incorrect choices resulted in decreases in the final synthesis yield, which is highly dependent on the peptide sequence, of as high as 30%. The present paper continues along this line of research but examines the Nalpha-9-fluorenylmethyloxycarbonyl (Fmoc)-synthesis strategy. The vasoactive peptide angiotensin II (AII, DRVYIHPF) and its [Gly8]-AII analogue were selected as model peptide resins. Variations in parameters such as the type of spacer group (linker) between the peptide backbone and the resin, as well as in the final acid cleavage protocol, were evaluated. The same methodology employed for the Boc strategy was used in order to establish rules for selection of the most appropriate linker-resin conjugate or of the peptide cleavage method, depending on the sequence to be assembled. The results obtained after treatment with four cleavage solutions and with four types of linker groups indicate that, irrespective of the circumstance, it is not possible to achieve complete removal of the peptide chains from the resin. Moreover, the Phe-attaching peptide at the C-terminal yielded far less cleavage (50-60%) than that observed with the Gly-bearing sequences at the same position (70-90%). Lastly, the fastest cleavage occurred with reagent K acid treatment and when the peptide was attached to the Wang resin.     

2-聚苯乙烯磺酰基乙醇树脂的合成及其在海因和脲固相成中的应用

合成了一种新型的聚合物载体—2-聚苯乙烯磺酰基乙醇，并研究其在固相有机合成中应用，聚苯乙烯亚磺酸钠树脂（1）在相转移催化剂BU4NI和助催化KI的作用下，与氯乙进行砜化反应，得到含羟基功能基的2-聚苯乙烯磺酰基乙醇树脂2。树脂2用Boc保护的氨基酯化，封闭树脂上未反应的羟基，用酸脱保护并用三乙胺中和，再与异（硫）氰酸苯酯反应生成聚合生物支载的脲树脂6树脂6用酸解脱得到海因和硫代海因化合物，用碱处理树脂6是得到取代的脲和硫脲，优化了合成反应的全过程，探讨了树脂在酸性和碱性条件下的解脱方法，结果表明，2-聚苯乙烯磺酰基乙醇树脂易与羧基形成含酯键的连接桥，连接桥在强酸性和碱性条件下均可解脱得到产物。     

An investigation of structure-reactivity relationships of δ-alkenyl oximes; competitive thermal reactions leading to cyclic nitrones and/or N-unsubstituted bicyclic isoxazolidines

Thermal reactions of C-aryl δ-alkenyl oximes give N-unsubstituted bicylic lactone, lactam and pyrrolidine fused isoxazolidines by an intramolecular oxime olefin cycloaddition pathway (IOOC) and/or cyclic nitrones by an azaprotio cyclotransfer (APT) route; a number of factors, including the nature of the aryl group, the oxime geometry and the structure of the linker between the oxime and the terminal alkene, contribute to the competition.     

A nonacid degradable linker for solid-phase synthesis

Synthesis and applications of two new nonacid degradable linkers as an alternative to the Wang linker for solid-phase synthesis are described. Resin from linker 2 looks superior to linker 1 in terms of yields for both anchoring of the first building block and cleavage and in terms of higher purity of the final product. Use of linker 2 avoids side reactions associated with the use of Wang resin due to an undesired cleavage during final acid treatment.     

Chelating ion-exchangers containing n-substituted hydroxylamine functional groups : Part II. N-acylphenylhydroxylamines

The problems associated with the conversion of commercial carboxylic acid ion exchangers to the acid chloride have been studied and a synthesis of a cross-linked poly(acryloyl chloride) is described. Reaction with phenylhydroxylamine produced a chelating ion exchanger, possessing acyl oxime functional groups, whose properties are compared with those of an aroyl oxime exchanger described earlier. Resin capacity from the acyl oxime group was 0.45 mmole g^-1, and the resin had a rapid equilibration rate. A column separation of mercury and lead is discussed.     

Synthesis and mass spectrometry studies of branched oxime ether libraries. Mapping the substitution motif via linker stability and fragmentation pattern.

The oxime ether chemistry has recently been used as a convenient approach to preparing potentially highly diverse combinatorial libraries. The synthetically easiest way to form the libraries is convergent, i.e., via reaction of a branched scaffold containing two or more aminooxy linker groups, with a variety of carbonyl substituents. We show here that such reactions between aldehydes and ketones of different structure with the scaffolds containing different types of aminooxy groups can lead to the formation of virtually all expected components in the model mixtures 1-3 formed from three scaffolds (7-9) and eight substituents (R(1)-R(8)). One important problem with the branched libraries is that the libraries formed from the more complex scaffolds, such as 11, contain multiple regioisomers. The results of extensive analysis of a variety of library components by mass spectrometry presented here show that the differences in the MS-MS fragmentation energies for different linkers yield regiochemical information essential for identification of individual library components.     

Convenient preparation of O-linked polymer-bound N-substituted hydroxylamines, intermediates for synthesis of N-substituted hydroxamic acids

[reaction: see text] An efficient procedure for preparation of O-linked polymer-bound N-substituted hydroxylamines by reduction of resin-bound oximes with borane.pyridine complex in the presence of dichloroacetic acid is reported. Other reducing systems commonly used for imine or oxime reduction were ineffective, including borane.pyridine in the presence of acetic acid. Oximes derived from a variety of aromatic and aliphatic aldehydes and ketones were successfully reduced. The N-substituted products were acylated and cleaved from resin to afford N-substituted hydroxamic acids.     

磺酸树脂在樟脑肟贝克曼裂解反应中的催化作用

我们发现以磺酸树脂作为固体酸催化樟脑肟贝克曼裂解反应可以生成α-龙脑烯腈.考察了溶剂、催化剂用量、反应温度和反应时间等对反应的影响.在优化条件下樟脑肟可以完全转化,α-龙脑烯腈选择性高达90.5%.动力学研究表明,樟脑肟在磺酸树脂催化下的贝克曼裂解反应服从准一级动力学模型,经过最小二乘法求得反应的表观活化能为64.6kJ/mol.     

Relative rates and approximate rate constants for inter- and intramolecular hydrogen transfer reactions of polymer-bound radicals

Measurements of relative rates and rate constants for inter- and intramolecular hydrogen transfer reactions of polymer-bound radicals are reported. The relative rate of reaction of resin-bound primary alkyl radical with tributyltin hydride is about 2 times slower than that of the benchmark reaction in solution. The data do not reveal whether this is due to a reduced rate constant or a lower concentration of tin hydride in the resin phase. Yet the difference between solid and solution reactions is small enough to be neglected, and it appears that rate constants measured in solution can be applied directly to resin-bound radicals. A resin-bound aryl radical abstracts a hydrogen atom rapidly (k = 3 x 10(6) s(-1)) from its own polymer backbone and linker, and a simplified view of the resin as a "solvent" is suggested for predicting such effects with other polymers and linkers. Rapid cyclizations of resin-bound aryl radicals will be possible, but slower cyclizations and most bimolecular reactions will be difficult due to the competing polymer/linker hydrogen transfer.     

Design and synthesis of a dual linker for solid phase synthesis of oleanolic acid derivatives

A hydrophilic amino-terminated poly(ethylene glycol)-type dual linker for solid phase synthesis of oleanolic acid derivatives using trityl chloride resin was designed and synthesized for the first time. Model reactions in both liquid and solid phase were performed to show the feasibility of its selective cleavage at two different sites. The biological assay results indicated that the long and flexible alkyl ether functionality in the linker is less likely to be critical for the binding event. Following the successful solid-phase synthesis of model compounds, the potential of this dual linker in reaction monitoring and target identification is deemed worthy of further study.     

Development of the traceless phenylhydrazide linker for solid-phase synthesis

The hydrazide group is a new oxidatively cleavable traceless linker for solid-phase chemistry. It can be readily introduced by hydrazide formation between a carboxy-functionalized resin and different substituted hydrazines. In order to achieve high yields in this step, new carboxylic acid resins were developed that are not prone to undesired imide formation upon activation of the carboxylic acid. The polymer-bound acyl hydrazides were successfully employed in various transformations, namely Heck, Suzuki, Sonogashira, and Stille couplings, as well as Wittig and Grignard reactions. Traceless release of the coupling products from the solid support is achieved selectively under mild conditions and in high purity by oxidation of the aryl hydrazides to acyl diazenes with Cu(II) salts or N-bromosuccinimide (NBS) and subsequent nucleophilic attack of the acyl diazene intermediates. Traceless cleavage by oxidation with NBS can be carried out as a two-step process in which stable acyl diazenes are first generated by treatment with NBS in the absence of a nucleophile. After removal of the reagents by simple resin washing, the traceless release is effected by the addition of methanol, which leads to products of high purity without any additional separation steps.     

Structural characterization and quantitation of compound loading of disubstituted benzoates bound to Wang resin through high-resolution magic angle spinning NMR spectroscopy

The combination of 1D and 2D high-resolution magic angle spinning NMR experiments led to the assignment of the proton and carbon resonances for several disubstituted benzoates bound to a polystyrene resin through a Wang linker. It is shown that the signal corresponding to the methylene protons of the linker can be utilized to monitor the solid-phase reactions and determine the loading of the compounds on the resin.     

Curing characteristics of carboxyl functionalized glucose resin and epoxy resin

The curing characteristics of carboxylic functionalized glucose resin (glucose maleic acid ester vinyl resin: GMAEV) and epoxy resin have been studied using DSC and FTIR methods. Exothermic reactions attributed to esterification and etherification reactions of the hydroxyl and carboxyl functionalities of GMAEV with the epoxy groups were identified. Exothermic reactions showed very different patterns according to the degree of carboxyl group substituent of GMAEV. The results showed that esterification reaction occurs in the early stage of cure and then etherification followed after completion of the esterification. A cured matrix containing epoxy resin and 50 wt.% of GMAEV was prepared and characterized. The cured matrix showed thermal stability up to 300 °C. The average glass transition temperature and storage modulus of the matrix were as high as 95 °C and 2700 MPa, respectively. The cured matrix of epoxy resin and GMAEV with higher degree of carboxyl group was found to have a lower density due to the formation of bulky groups in the crosslinks.     

A novel heterobifunctional linker for facile access to bioconjugates

A convenient synthesis of a novel heterobifunctional linker molecule is described. The linker contains a thiol-reactive nitropyridyl disulfide group (Npys) and an aldehyde-reactive aminooxy group with a propensity to form disulfide and oxime linkages. The utility of the linker molecule to cross-link different biomolecules has been demonstrated by employing it in the efficient preparation of a peptide-oligonucleotide conjugate. The linker reported herein could be a useful tool for cross-coupling of different but appropriately functionalised biomolecules.     

The preparation of a new "safety catch" ester linker for solid-phase synthesis

A new "safety catch" linker for esters has been synthesized on polystyrene resin. This 2-tert-butoxyphenol resin 10 may be acylated to give a relatively stable ester that will allow nucleophilic chemistry without reaction at the linking ester group. Removal of the tert-butyl group with acid unmasks a highly reactive 2-hydroxyphenyl ester that reacts readily with nucleophiles to cause release of the product from the resin. This sequence has been exemplified by acylating the resin with various bromo acids, carrying out nucleophilic displacements with thiols, phenols, or amines, activating the ester with trifluoroacetic acid and cleaving from the resin with amines to give the (nucleophile) substituted carboxamides in high yield and purity. Kinetic studies with a model ester revealed half-lives for reaction with morpholine of 119 h for the tert-butoxyphenyl ester and 1 min for the corresponding phenol.     

Synthesis and properties of a new chelating resin containing the oxime group

A macroreticular polystyrene-based chelating resin with oxime and diethylamino functional groups has been synthesized. The resin is stable in acid and alkaline solutions; no decrease in nitrogen content or capacity for sorption of copper(II) is observed when it is exposed to 3M hydrochloric acid and 1M sodium hydroxide for 7 days. The resin has higher selectivity for copper(II) than for other metal ions tested and the time required for 50% uptake of copper(II) is 15 min. The highest capacity for copper(II) is 2.0 mmole/g at pH 6.0. In a column operation, quantitative recovery of copper(II) is achieved by elution with 1M hydrochloric acid, and the resin can be used repeatedly.     

Solid-phase synthesis of an oxalic acid amide library

Monoamides of oxalic acid are of interest as bioisosteric replacements for phosphate groups in the design of new enzyme inhibitors. Here, we have demonstrated the use of oxalic acid as a linker to the Wang resin to synthesize individual or libraries of phosphate biosteres. The highly reactive resin-bound acid chloride reacts with arylamines to yield resin-bound N-aryloxamic acids (oxanilic acids). This methodology is especially useful for the rapid synthesis of 2-(oxalylamino)benzoic acids (OBAs), because it can be utilized for library synthesis and eliminates the intermediate purification step necessary in solution-phase reactions. The products are cleaved off the resin with trifluoroacetic acid in dichloromethane in good yields.     

Solid-phase synthesis of oligosaccharides and on-resin quantitative monitoring using gated decoupling (13)C NMR

A general strategy for solid-phase oligosaccharide synthesis capable of nondestructive quantitative monitoring has been developed. The synthesis was carried out on TentaGel using thioglycosides as glycosylating agents and dimethylthiomethylsulfonium triflate as the activator. An acylsulfonamide linker was introduced to cleave the oligosaccharide from the resin. The solid-phase reactions were monitored quantitatively by using the inverse gated decoupling technique of (13)C NMR, where two (13)C-enriched markers were used to monitor the reactions: one was (13)C-enriched glycine incorporated as a part of the linker and as an internal standard, and the other was a (13)C-enriched acetyl group used as a protecting group of the glycosylation reagent. A representative synthesis of sialyl Lewis X branched tetrasaccharide was demonstrated.     

A new method for the synthesis of oligodeoxyribonucleotides containing 4-N-alkoxycarbonyldeoxycytidine derivatives and their hybridization properties.

Oligodeoxyribonucleotides incorporating 4-N-alkoxycarbonyldeoxycytidine derivatives were synthesized on polystyrene-type ArgoPore resins having a new benzyloxy(diisopropyl)silyl linker, by use of ZnBr(2) as the detritylating agent. The first 3'-terminal thymidine could be attached to the resin by successive in situ reactions of 5'-O-DMTr-thymidine with diisopropylsilanediyl ditriflate and an ArgoPore resin containing hydroxyl groups. The use of this new silanediyl-type linker allowed release of the DNA chain from the resin by treatment with TBAF under neutral conditions. The T(m) experiments apparently showed that incorporation of 4-N-alkoxycarbonyldeoxycytidines into DNA strands resulted in higher hybridization affinity with the complementary DNA strands than that of 4-N-acyldeoxycytidines. In addition, comparable T(m) studies using oligodeoxyribonucleotides incorporating acyl (RC(O)-) groups and alkoxyacyl (RO(CH(2))(n)C(O)-) groups having the same chain length show that the latter tend to exhibit higher T(m) values than the former. It turned out that 4-N-alkoxycarbonyldeoxycytidines can form base pairs not only with deoxyguanosine but also with deoxyadenosine. Based on the ab initio calculations of the hydrogen bond energies of the possible base pairs formed between 4-N-methoxycarbonyl-1-methylcytosine and 9-methyladenine and the NMR analysis of the base-pairs of (15)N-labeled 4-N-alkoxycarbonyldeoxycytidines with deoxyadenosine derivatives, we conclude that the base pair involves two unique hydrogen bonds between the cytosyl 4-NH group and the adenyl N(1) atom and between the O atom of the ester group and the adenyl 6-NH group.