Mercury complex [(HOCH<Subscript>2</Subscript>)<Subscript>3</Subscript>CNH<Subscript>3</Subscript>]<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> [HgI<Subscript>4</Subscript>]<Superscript>2−</Superscript>: Synthesis and structure

The complex [(HOCH₂)₃CNH₃] ₂ ⁺ [HgI₄]^2? (I) was synthesized by reacting (trioxymethyl)methylammonium iodide with mercury dioide (2: 1 mol/mol) in acetone. X-ray crystallography shows that the complex consists of two types of crystallographically independent [(HOCH₂)₃CNH₃]⁺ cations and tetrahedral anions [HgI₄]^2? (IHgI, 106.49(2)°–113.99(4)°; Hg-I, 2.7849(8)-2.8105(8) Å. [(HOCH₂)₃CNH₃]⁺ cations are linked via hydrogen bonds O…H-N and O-H…N (O…N, 2.84–2.92 Å) to form polymer chains, which are cross-linked with one another via anions (I…H, 2.81, 2.82 Å).     

Experimental Determination of the Isotherm at 15°C of the System Mg<Superscript>2+</Superscript>/Cl<Superscript>−</Superscript>, SO<Subscript>4</Subscript><Superscript>2</Superscript>–H<Subscript>2</Subscript>O

Summary.  The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.  Corresponding author. E-mail: ariguib@planet.tn Received October 16, 2002; accepted (revised) December 3, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

<Superscript>35</Superscript>Cl NQR for the SbCl<Subscript>3</Subscript> complex with aniline,SbCl<Subscript>3</Subscript>·NH<Subscript>2</Subscript>C<Subscript>6</Subscript>H<Subscript>5</Subscript>

The temperature dependence of the ³⁵Cl NQR frequencies and spin-lattice relaxation times has been investigated for a trigonal-bipyramidal vn complex SbCl₃·NH₂C₆H₅. Thermally activated motion of chlorine atoms (pseudorotation) was not revealed in the complex, in contrast to the vπ complexes of SbCl₃ with related molecular structures. The high potential barrier of pseudorotation in the aniline complex is likely to be due to the unusually high nonequivalence of Sb-Cl chemical bonds.     

Structures of the complex ions [CuCl<Subscript>4</Subscript>]<Superscript>2−</Superscript> and [CuCl<Subscript>5</Subscript>]<Superscript>3−</Superscript>

The electronic structures of the complex ions [CuCl₄]^2? and [CuCl₅]^3? were analyzed in terms of the extended angular overlap model (AOM) with consideration to sd and pd mixing. The total antibonding orbital energies of these ions show no anomalies in the transition from a tetrahedron to a planar square [CuCl₄]^2? and from a trigonal bipyramid to a tetragonal pyramid [CuCl₅]^3?. Presumably, the existence of numerous intermediate forms of these complexes is mainly due to the packing effects rather than the electronic factors.     

Isothermal solubility diagram of the 2Na<Superscript>+</Superscript>,Mg<Superscript>2+</Superscript>‖2Cl<Superscript>−</Superscript>, 2ClO<Stack><Subscript>3</Subscript><Superscript>‒</Superscript></Stack>-H<Subscript>2</Subscript>O quaternary system at 20 and 100°C

The solubility in the 2Na⁺,Mg²⁺‖2Cl⁻, 2ClO₃⁻-H₂O system was studied at 20 and 100°C and the solubility diagrams were plotted. New compounds were not found to form in the title quaternary reciprocal system. The sodium chloride field was observed to expand with rising temperature.     

A theoretical study on the dynamics of the gas phase reaction of NH<Subscript>2</Subscript>(<Superscript>2</Superscript>B<Subscript>1</Subscript>) with HO<Subscript>2</Subscript>(<Superscript>2</Superscript>A″)

Quasi-classical trajectory calculations and stochastic one-dimensional chemical master equation simulation methods are used to study the dynamics of the reaction of amidogen radical [NH₂(²B₁)] with hydroperoxyl radical [HO₂(²A″)] on the lowest singlet electronic state. The title complex reaction takes place on a multi-well multichannel potential energy surface consisting of three deep potential wells and one van der Waals complex. In quasi-classical trajectory calculations a new analytical potential energy surface based on CCSD(T)/aug-cc-pVTZ//MPW1K/6-31+G(d,p) ab initio method was driven and used to study the dynamics of the title reaction. In quasi-classical trajectory calculations, the reactive cross sections and reaction probabilities are determined for 200–2000 K relative translational energies to calculate the rate constants. The same ab initio method was used to have the necessary data for solving the one-dimensional chemical master equation to calculate the rate constants of different channels. In solving the master equation, the Lennard-Jones potential model was used to form the collision between the collider gases. The fractional populations of different intermediates and products in the early stages of the reaction were examined to determine the role of the energized intermediates and the van der Waals complex on the dynamics of the title reaction. Although the calculated total rate constants from both methods are in good agreement with the reported experimental values in the literature, the quasi-classical trajectory simulation predicts the formation of NH₂O + OH as the major channel in the title reaction in accordance with the previous studies (Sumathi and Peyerimhoff, Chem. Phys. Lett., 263:742–748, 1996), while the stochastic master equation simulation predicts the formation of HNO + H₂O as the major products.     

Framework coordination polymer based on the [Re<Subscript>3</Subscript>Mo<Subscript>3</Subscript>S<Subscript>8</Subscript>(CN)<Subscript>6</Subscript>]<Superscript>6–</Superscript>heterometallic cluster anions and Cd<Superscript>2+</Superscript> cations

A new coordination polymer, [Cd(NH₃)₄]₂{Cd[Re₃Mo₃S₈(CN)₆]}·1.5H₂O (I), was prepared by the reaction between solutions of Cd(CH₃COO)₂ · 2H₂O in aqueous ammonia and CaK₄[Re₃Mo₃S₈(CN)₆] · 8H₂O in water. The crystals are cubic, space group Fm3m (Prussian blue structural type); a = 15.0268(4) Å (CIF file CSD no. 431555). According to ESR data, compound I is paramagnetic, g-factor is 2.298. Thermal stability investigation by TGA and powder X-ray diffraction showed that elimination of coordinated NH₃ molecules is accompanied by sample amorphization.     

Structural investigation of salts containing ions [Pd(NH<Subscript>3</Subscript>)<Subscript>4</Subscript>]<Superscript>2+</Superscript> and [IrF<Subscript>6</Subscript>]<Superscript>2–</Superscript>

Double complex salts (DCS) α-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/m, a = 6.3181(3) Å, b = 10.8718(5) Å, с = 7.4526(4) Å, β = 103.568(2)°), β-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/с, a = 8.5773(3) Å, b = 10.8791(4) Å, с = = 12.6741(3) Å, β = 122.497(2)°), [Pd(NH₃)₄]₃[IrF₆]₂Cl₂·H₂O (P-1, a = 7.6080(2) Å, b = 7.6274(2) Å, с = 11.8070(3) Å, β = 122.497(2)°), and [Pd(NH₃)₄]₂[IrF₆]NO₃ (Fm-3m, a = 11.21210(10) Å) have been synthesized and structurally characterized for the first time. The existence of polymorphs for the DCS has been revealed. The influence of the chemical composition of the initial reagents on the reaction course and, respectively, the products, has been demonstrated. A hypothesis on the influence of the second coordination sphere on the formation of one or the other polymorph of the DCS has been suggested. It has been shown that the series α-[Pd(NH₃)₄][МF₆]·H₂O (M = Pt, Pd) exhibits isostructurality.     

Mechanistic and kinetic study the reaction of O(<Superscript>3</Superscript>P) + CH<Subscript>3</Subscript>CFCH<Subscript>2</Subscript>

The triplet potential energy surface of the O(³P) + CH₃CFCH₂ reaction has been investigated at the BMC-CCSD//MP2/6-311++G(d,p) level. Multichannel RRKM theory and transition state theory are employed to calculate the rate constants over a wide range of temperatures and pressures. The total rate constants show positive temperature dependence and pressure independence. At pressure of 10 Torr with He as bath gas, the addition/elimination on triplet potential energy surface is a dominant pathway. Major predicted end products are CH₃CFCHO (I) and H at the temperatures between 200 and 3,000 K; the direct hydrogen abstraction leading to OH + CH₂CFCH₂(I) plays an important role at higher temperatures. The calculated overall rate constants are in good agreement with the available experimental data.     

Thermogravimetric analysis of wheatleyite Na<Subscript>2</Subscript>Cu<Superscript>2+</Superscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>·2H<Subscript>2</Subscript>O

Evidence for the existence of primitive life forms such as lichens and fungi can be based upon the formation of oxalates. These oxalates form as a film like deposit on rocks and other host matrices. The anhydrous oxalate mineral moolooite CuC₂O₄ as the natural copper(II) oxalate mineral is a classic example. Another example of a natural oxalate is the mineral wheatleyite Na₂Cu²⁺(C₂O₄)₂·2H₂O. High resolution thermogravimetry coupled to evolved gas mass spectrometry shows decomposition of wheatleyite at 255°C. Two higher temperature mass losses are observed at 324 and 349°C. Higher temperature mass losses are observed at 819, 833 and 857°C. These mass losses as confirmed by mass spectrometry are attributed to the decomposition of tennerite CuO. In comparison the thermal decomposition of moolooite takes place at 260°C. Evolved gas mass spectrometry for moolooite shows the gas lost at this temperature is carbon dioxide. No water evolution was observed, thus indicating the moolooite is the anhydrous copper(II) oxalate as compared to the synthetic compound which is the dihydrate.     

Platinum–Ruthenium Cluster Complexes from the Reaction of Ru<Subscript>3</Subscript>(CO)<Subscript>12</Subscript> with Pt(PBu<Superscript>t</Superscript><Subscript>3</Subscript>)<Subscript>2</Subscript>

Three new platinum–ruthenium complexes: Pt₃Ru₃(PBu^t ₃)₃(CO)₁₂, 8, Pt₅Ru₃(PBu^t ₃)₃(CO)₁₂, 9 and PtRu₃(PBu^t ₃)₂(CO)₈(μ₃-PBu^t)(μ-H)₂, 10 were obtained from the reaction of Ru₃(CO)₁₂ with Pt(PBu^t ₃)₂. Compound 8 was obtained from this reaction when conducted at 25 °C. Compounds 9 and 10 were obtained when the reaction was conducted at 68 °C. The structure of 8 consists of a central triangular cluster of three ruthenium atoms with one Pt(PBu^t ₃) group bridging each of the three Ru–Ru bonds. The structure of 9 consists of a capped pentagonal bipyramidal cluster of eight metal atoms that is formed formally by the addition of two platinum atoms to 8. The structure of 10 contains a triangular cluster of three ruthenium atoms with a Pt(PBu^t ₃) group bridging one of the Ru–Ru bonds. A t-butyl phosphido ligand formed by degradation of a molecule of PBu^t ₃ bridges the three ruthenium atoms. This report is dedicated to the memory of Professor F. A. Cotton for his many pioneering contributions to inorganic and metal cluster chemistry.     

Yb<Superscript>3+</Superscript> → Er<Superscript>3+</Superscript> energy transfer in Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and temperature characteristic of near-infrared photoluminescence

For the Er³⁺–Yb³⁺ codoped Al₂O₃ powders, the strong near-infrared photoluminescence (PL) centered at 1.535 μm derived from the energy transfer (ET) from Yb³⁺ to Er³⁺ was detected by a 978 nm laser diode excitation. Compared with that of Er³⁺ doped Al₂O₃ powders, the PL intensity enhanced about 9 times, the full width at half maximum (FWHM) extended from 82 to 90 nm, and the lifetime increased from 3.22 to 4.17 ms for Er³⁺–Yb³⁺ codoped Al₂O₃ powders at room temperature. The ET coefficient of 2.18 × 10⁻¹⁸ cm³ s⁻¹ from Yb³⁺ to Er³⁺ was obtained based on the rate equations. The decrease of PL intensity with increasing temperature in the range of 298–733 K was observed, due to thermally enhanced nonradiative relaxation ⁴I_13/2 → ⁴I_15/2 dominated over thermally enhanced phonon-assisted ET in the Er³⁺–Yb³⁺ codoped Al₂O₃.     

Interaction of [В<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Superscript>2–</Superscript> and [В<Subscript>12</Subscript>H<Subscript>12</Subscript>]<Superscript>2–</Superscript> with nitro compounds

The interaction of the [B₁₀H₁₀]^2– and [B₁₂H₁₂]^2– anions with aliphatic and aromatic nitro compounds (RNO₂, where R = Et, n-Pr, i-Pr, tert-Bu, Ph) has been studied under irradiation with visible and UV light. It has been shown that, depending on the reaction conditions, both mono- and disubstituted nitro-closo-decaborates can be selectively obtained in yields up to 50%.     

Synthesis and Structure of the bismuth complex [Ph<Subscript>3</Subscript>PrP]<Stack><Subscript>4</Subscript><Superscript>+</Superscript></Stack>[Bi<Subscript>4</Subscript>I<Subscript>16</Subscript>]<Superscript>4−</Superscript>

The complex [Ph₃P] ₄ ⁺ [Bi₄I₁₆]^4? · 2 Me₂C=O (I) was synthesized by the reaction of triphenyl(propyl)phosphonium iodide with bismuth iodide in acetone. The crystal structure of complex I was determined by X-ray crystallography. It contains, in addition to solvent molecules, two types of crystallographically independent tetrahedral tetraphenyl(propyl)phosphonium cations and tetranuclear anions [Bi₄I₁₆]^4? in a chair conformation with the bismuth atoms being in an octahedral coordination. The Bi-I distances in the anion vary within 2.8768(4)–3.2524(4) Å.     

Research on photosensitivity of benzoquinones and benzoquinoneimines in the sunlight/Fe<Superscript>2+</Superscript>/S<Subscript>2</Subscript>O<Subscript>8</Subscript><Superscript>2−</Superscript> system

This paper investigated the photodegradation characteristics of benzoquinones and benzoquinoneimines. The photosensitivity of benzoquinones and benzoquinoneimines were analyzed by measuring the yield of SO ₄ ^?· in a light/Fe²⁺/S₂O₈ ^2? system and the degradation mechanism of benzoquinones, then discussed benzoquinoneimines in light/Fe²⁺/S₂O₈ ^2? and light/S₂O₈ ^2? system. The results revealed that a more aggressive oxidation of benzoquinones and benzoquinoneimines by the sunlight/Fe²⁺/S₂O₈ ^2? method showed a more rapid and more complete removal of chromaticity than that of the UV/Fe²⁺/S₂O₈ ^2? method. It was showed that they were photosensitizers, and they could generate ¹O₂ and O ₂ ^?· which could promote the formation of SO ₄ ^?· and ^·OH in the sunlight system. Nevertheless, for benzoquinones, the sunlight/S₂O₈ ^2? method was superior to the UV/S₂O₈ ^2? method. For benzoquinoneimines, the sunlight/S₂O₈ ^2? method was inferior to the UV/S₂O₈ ^2? method. In addition, the yield of SO ₄ ^?· in the sunlight/Fe²⁺/S₂O₈ ^2? system was more than that of the UV/Fe²⁺/S₂O₈ ^2? system. Therefore, the photosensitivity of benzoquinones is superior to benzoquinoneimines in water treatment.     

Computational studies of the interactions of I<Superscript>−</Superscript> and I<Subscript>3</Subscript><Superscript>−</Superscript> with TiO<Subscript>2</Subscript> clusters: implications for dye-sensitized solar cells

Abstract  

First principle density-functional theory calculations have been carried out on the interaction of I⁻ and I₃ ⁻ with TiO₂ anatase surfaces, modeled by finite clusters that range in size from 48 to 180 atoms. The total energy per TiO₂ unit and the HOMO-LUMO gaps decrease with increasing the size of the clusters. Both redox species (I⁻ and I₃ ⁻) are strongly adsorbed on the TiO₂ surface with the adsorbtion of I⁻ being stronger. Adsorption of triiodide leads to its dissociation. The positions of the HOMO and LUMO of the adsorbed systems shift negatively from their respective cluster values. Solvation effects have been modeled using the CPCM model. Introducing solvent reduces the shifting of HOMO and LUMO. Implications for dye-sensitized solar cells (DSSC) are discussed. Both the HOMO-LUMO shifting and the strong adsorption might affect the performance of the cell.     

The ESCA analysis of the B<Subscript>3</Subscript>H<Stack><Subscript>8</Subscript><Superscript>−</Superscript></Stack> anion

Compounds [Et₄N]₂B₃H₈ and CsB₃H₈ are studied using the ESCA method. The results of analysis of the B1s electron spectra and estimation of the effective charge differences in [Et₄N]₂B₃H₈ are compared to the data of theoretical calculations of the B₃H₈⁻ anion.     

Flame synthesized Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Tb<Superscript>3+</Superscript>–Yb<Superscript>3+</Superscript> phosphors as spectral convertors for solar cells

Near-infrared (NIR) quantum cutting phosphors serve as a potential material for fabricating photovoltaic spectral convertors. In many cases, quantum cutting phosphors are obtained via a wet chemical method coupled with a post-annealing treatment—a very costly process. In this report, we used continuous flame spray pyrolysis (FSP) for fabricating Y₂O₃:Tb³⁺–Yb³⁺ quantum-cutting phosphors without any post-treatment. Based on characterizations by scanning electron microscopy, transmission electron microscopy, and X-ray diffraction, we found that as-synthesized Y₂O₃:Tb³⁺–Yb³⁺ phosphors exhibit hollow and shell-like micro-structures composed of highly crystalline and pure cubic-phase nanoparticles (< 50 nm). Photoluminescence studies of the phosphors revealed that NIR emissions appeared with the introduction of Yb to Y₂O₃:Tb³⁺. Phosphor size was successfully controlled by managing the concentration of the metal precursor solution for FSP. The Y₂O₃:Tb³⁺–Yb³⁺ phosphors were then embedded into transparent poly-ethylene-co-vinyl acetate (EVA) film to form a spectral convertor. The composite films of Y₂O₃:Tb³⁺–Yb³⁺ phosphors and poly-EVA were found to be highly transparent in the visible range (> 500 nm), making them suitable as spectral photovoltaic convertors.     

Analysis of the aromaticity in extended systems formed from isoelectronic Al<Subscript>4</Subscript><Superscript>2−</Superscript> and C<Subscript>4</Subscript><Superscript>2+</Superscript> aromatic clusters

Inspired by carbo-benzene and its inorganic analogues, in the current work, the viability of extended systems (called carbomers) formed from aromatic small rings was studied. The aluminum aromatic cluster, Al₄^2?, and its isoelectronic carbon analogue, C₄²⁺, were employed as starting point. The insertion of alkynyl units into the Al–Al and C–C bonds results in the extended molecules named carbomers. These molecules were compared with the global minima structures, which were searched employing the genetic algorithm program, GEGA. The electronic delocalization (aromaticity) of the isomers was studied with the induced magnetic field (B^ind). The results showed that global minimum of C₁₂²⁺ (formed from C₄²⁺) was an unexpected diatropic structure which presented a similar magnetic response to the C₄²⁺ cluster. Also, optical properties of C₁₂²⁺ were computed.