Synthesis and structure of new compounds with Pt-Ga bonds: Insertion of the bulky gallium (I) bisimidinate Ga(DDP) into Pt-Cl bond

Reactions of the sterically bulky mono-valent group 13 bisimidinate gallium(I), Ga(DDP) (1) (DDP = 2-{(2, 6-diisopropylphenyl)amino}-4-{(2, 6-diisopropylphenyl)imino}-2-pentene, HC(CMeNC₆H₃-2,6-ⁱPr₂)₂) with olefin supported group 10 complexes, [(diene)PtCl₂] [diene = 1,5-cyclooctadiene (COD), endo-dicyclopentadiene (dcy)] and [(COD)Pd(Me)(OTf)] (OTf = O₃SCF₃) are reported. These reactions afforded [(COD)Pt(Cl){ClGa(DDP)}] (2), [(dcy)Pt(Cl){ClGa(DDP)}] (3) and [(DDP)Ga(Me)(OTf)] (4) in moderate yields. Compounds 2-4 were characterized by elemental analysis, NMR (¹H, ¹³C) spectroscopy and also by single crystal X-ray structural analysis. The solid state structures of complexes 2 and 3 reveal the oxidative insertion of Ga(DDP) into the Pt-Cl bond without altering the π-coordinated double bonds in the olefin.     

Mono and dinuclear iridium, rhodium and ruthenium complexes containing chelating carboxylato pyrazine ligands: Synthesis, molecular structure and electrochemistry

The mononuclear complexes [(η⁵-C₅Me₅)IrCl(L¹)] (1), [(η⁵-C₅Me₅)RhCl(L¹)] (2), [(η⁶-p-PrⁱC₆H₄Me)RuCl(L¹)] (3) and [(η⁶-C₆Me₆)RuCl(L¹)] (4) have been synthesised from pyrazine-2-carboxylic acid (HL¹) and the corresponding complexes [{(η⁵-C₅Me₅)IrCl₂}₂], [{(η⁵-C₅Me₅)RhCl₂}₂], [{(η⁶-p-PrⁱC₆H₄Me)RuCl₂}₂], and [{(η⁶-C₆Me₆)RuCl₂}₂], respectively. The related dinuclear complexes [{(η⁵-C₅Me₅)IrCl}₂(μ-L²)] (5), [{(η⁵-C₅Me₅)RhCl}₂(μ-L²)] (6), [{(η⁶-p-PrⁱC₆H₄Me)RuCl}₂(μ-L²)] (7) and [{(η⁶-C₆Me₆)RuCl}₂(μ-L²)] (8) have been obtained in a similar manner from pyrazine-2,5-dicarboxylic acid (H₂L²). Compounds isomeric to the latter series, [{(η⁵-C₅Me₅)IrCl}₂(μ-L³)] (9), [{(η⁵-C₅Me₅)RhCl}₂(μ-L³)] (10), [{(p-PrⁱC₆H₄Me)RuCl}₂(μ-L³)] (11) and [{(η⁶-C₆Me₆)RuCl}₂(μ-L³)] (12), have been prepared by using pyrazine-2,3-dicarboxylic acid (H₂L³) instead of H₂L². The molecular structures of 2 and 3, determined by X-ray diffraction analysis, show the pyrazine-2-carboxylato moiety to act as an N,O-chelating ligand, while the structure analyses of 5-7, confirm that the pyrazine-2,5-dicarboxylato unit bridges two metal centres. The electrochemical behaviour of selected representatives has been studied by voltammetric techniques.     

Construction of optically active multimetallic systems of rhodium(I), palladium(II), and ruthenium(II) with a P-chiral tetraphosphine ligand

The treatment of optically P-chiral tetraphosphine, (3S,6R,9R,12S)-6,9-di-tert-butyl-2,2,3,12,13,13-hexamethyl-3,6,9,12-tetraphosphatetradecane (1), with rhodium(I), palladium(II), and ruthenium(II) complex precursors led to the selective formation of mono-, di-, or trinuclear homo- or heterometallic complexes, [Rh(1)]SbF₆ (4), [{Rh(nbd)}₂(1)](SbF₆)₂ (3), [{Pd(η³-allyl)}₂(1)](SbF₆)₂ (5), [{RuCl(η⁵-C₅(CH₃)₅)}₂(1)] (6), and [{RuCl₂(η⁶-benzene)}₂(PdCl₂)(1)] (8). These complexes were characterized by NMR and X-ray crystallographic analysis.     

Mono and dinuclear rhodium, iridium and ruthenium complexes containing chelating 2,2′-bipyrimidine ligands: Synthesis, molecular structure, electrochemistry and catalytic properties

The mononuclear cations [(η⁵-C₅Me₅)RhCl(bpym)]⁺ (1), [(η⁵-C₅Me₅)IrCl(bpym)]⁺ (2), [(η⁶-p-PrⁱC₆H₄Me)RuCl(bpym)]⁺ (3) and [(η⁶-C₆Me₆)RuCl(bpym)]⁺ (4) as well as the dinuclear dications [{(η⁵-C₅Me₅)RhCl}₂(bpym)]²⁺ (5), [{(η⁵-C₅Me₅)IrCl}₂(bpym)]²⁺ (6), [{(η⁶-p-PrⁱC₆H₄Me)RuCl}₂(bpym)]²⁺ (7) and [{(η⁶-C₆Me₆)RuCl}₂(bpym)]²⁺ (8) have been synthesised from 2,2′-bipyrimidine (bpym) and the corresponding chloro complexes [(η⁵-C₅Me₅)RhCl₂]₂, [(η⁵-C₅Me₅)IrCl₂]₂, [(η⁶-PrⁱC₆H₄Me)RuCl₂]₂ and [(η⁶-C₆Me₆)RuCl₂]₂, respectively. The X-ray crystal structure analyses of [3][PF₆], [5][PF₆]₂, [6][CF₃SO₃]₂ and [7][PF₆]₂ reveal a typical piano-stool geometry around the metal centres; in the dinuclear complexes the chloro ligands attached to the two metal centres are found to be, with respect to each other, cis oriented for 5 and 6 but trans for 7. The electrochemical behaviour of 1-8 has been studied by voltammetric methods. In addition, the catalytic potential of 1-8 for transfer hydrogenation reactions in aqueous solution has been evaluated: All complexes catalyse the reaction of acetophenone with formic acid to give phenylethanol and carbon dioxide. For both the mononuclear and dinuclear series the best results were obtained (50 °C, pH 4) with rhodium complexes, giving turnover frequencies of 10.5 h⁻¹ for 1 and 19 h⁻¹ for 5.     

Mono and dinuclear complexes of half-sandwich platinum group metals (Ru, Rh and Ir) bearing a flexible pyridyl-thiazole multidentate donor ligand

The mononuclear cationic complexes [(η⁶-C₆H₆)RuCl(L)]⁺ (1), [(η⁶-p-ⁱPrC₆H₄Me)RuCl(L)]⁺ (2), [(η⁵-C₅H₅)Ru(PPh₃)(L)]⁺ (3), [(η⁵-C₅Me₅)Ru(PPh₃)(L)]⁺ (4), [(η⁵-C₅Me₅)RhCl(L)]⁺ (5), [(η⁵-C₅Me₅)IrCl(L)]⁺ (6) as well as the dinuclear dicationic complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (7), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (8), [{(η⁵-C₅H₅)Ru(PPh₃)}2(L)]²⁺ (9), [{(η⁵-C₅Me₅)Ru(PPh₃)}₂(L)]²⁺ (10), [{(η⁵-C₅Me₅)RhCl}₂(L)]²⁺ (11) and [{(η⁵-C₅Me₅)IrCl}₂(L)]²⁺ (12) have been synthesized from 4,4′-bis(2-pyridyl-4-thiazole) (L) and the corresponding complexes [(η⁶-C₆H₆)Ru(μ-Cl)Cl]₂, [(η⁶-p-ⁱPrC₆H₄Me)Ru(μ-Cl)Cl]₂, [(η⁵-C₅H₅)Ru(PPh₃)₂Cl)], [(η⁵-C₅Me₅)Ru(PPh₃)₂Cl], [(η⁵-C₅Me₅)Rh(μ-Cl)Cl]₂ and [(η⁵-C₅Me₅)Ir(μ-Cl)Cl]₂, respectively. All complexes were isolated as hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV-vis spectroscopy. The X-ray crystal structure analyses of [3]PF₆, [5]PF₆, [8](PF₆)₂ and [12](PF₆)₂ reveal a typical piano-stool geometry around the metal centers with a five-membered metallo-cycle in which 4,4′-bis(2-pyridyl-4-thiazole) acts as a N,N′-chelating ligand.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

Reactions of rhenium and manganese carbonyl complexes with 1,8-bis(diphenylphosphino)naphthalene: Ligand chelation, C-H and C-P bond-cleavage reactions

Reaction of [Re₂(CO)₈(MeCN)₂] with 1,8-bis(diphenylphosphino)naphthalene (dppn) afforded three mono-rhenium complexes fac-[Re(CO)₃(κ¹:η¹-PPh₂C₁₀H₆)(PPh₂H)] (1), fac-[Re(CO)₃{κ¹:κ¹:η¹-(O)PPh₂C₁₀H₆(O)PPh(C₆H₄)}] (2) and fac-[ReCl(CO)₃(κ²-PPh₂C₁₀H₆PPh₂)] (3). Compounds 1-3 are formed by Re-Re bond cleavage and P-C and C-H bond activation of the dppn ligand. Each of these three complexes have three CO groups arranged in facial fashion. Compound 1 contains a chelating cyclometalated diphenylnaphthylphosphine ligand and a terminally coordinated PPh₂H ligand. Compound 2 consists of an orthometalated dppn-dioxide ligand coordinated in a κ¹:κ¹:η¹-fashion via both the oxygen atoms and ortho-carbon atom of one of the phenyl rings. Compound 3 consists of an unchanged chelating dppn ligand and a terminal Cl ligand. Treatment of [Mn₂(CO)₈(MeCN)₂] with a slight excess of dppn in refluxing toluene at 72 °C, gave the previously reported [Mn₂(CO)₈(μ-PPh₂)₂] (4), formed by cleavage of C-P bonds, and the new compound fac-[MnCl(CO)₃(κ²-PPh₂C₁₀H₆PPh₂)] (5), which has an unaltered chelating dppn and a terminal Cl ligand. In sharp contrast, reaction of [Mn₂(CO)₈(MeCN)₂] with slight excess of dppn at room temperature yielded the dimanganese [Mn₂(CO)₉{κ¹-PPh₂(C₁₀H₇)}] (6) in which the diphenylnaphthylphosphine ligand, formed by facile cleavage of one of the P-C bonds, is axially coordinated to one Mn atom. Compound 6 was also obtained from the reaction of [Mn₂(CO)₉(MeCN)] with dppn at room temperature. The XRD structures of complexes 1-3, 5, 6 are reported.     

Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

Synthesis of 2-picolyl functionalized η-cyclopentadienyl derivatives of rhodium(I) and iridium(I) and preliminary study of their reaction with ruthenium(II) for assembling hetero-bimetallic complexes

The 2-picolylcyclopentadienyl derivatives of rhodium(I) and iridium(I) of formula [M{η⁵-C₅H₄(2-CH₂C₅H₄N)}(η⁴-C₈H₁₂)] (3) (M = Rh) and (4) (M = Ir) are obtained in good yields by reacting 2-picolylcyclopentadienyllithium (7) with [RhCl(η⁴-C₈H₁₂)]₂ and [IrCl(η⁴-C₈H₁₂)]₂, respectively. The corresponding dicarbonyl derivatives, [M{η⁵-C₅H₄(2-CH₂C₅H₄N)}(CO)₂] (5) (M = Rh) and 6 (M = Ir), are obtained in good yields by reacting 2-picolylcyclopentadienylthallium(I) (8) with [RhCl(CO)₂]₂ and [IrCl(C₅H₅N)(CO)₂], respectively. 5 has already been reported in the literature. The new complexes were characterized by elemental analysis, mass spectrometry, ¹H NMR, FT-IR, and UV-Vis (210-330 nm) spectroscopy. The UV-Vis spectra indicate the existence of some electronic interaction between the 2-picolinic chromophore and the cyclopentadienyl-metal moiety. The study of the electrochemical behaviour of 3-6 by cyclic voltammetry (CV) allows the interpretation of the electrode processes and gives information about the location of the redox sites. Moreover, various synthetic strategies were tested in order to try to coordinate the complexes 3-6 to a ruthenium(II) centre, but most of them failed. Instead, the hetero-bimetallic complex bis(2,2′-bipyridine)[(η⁵-2-picolylcyclopentadienyl)(η⁴-cycloocta-1,5-diene)rhodium(I)]chlororuthenium(II)-(hexafluorophosphate) (13), was obtained, although in poor yields (10%), by reacting the nitrosyl complex [RuCl(bipy)₂(NO)][PF₆]₂14 (bipy = 2,2′-bipyridine) first with potassium azide and then with the rhodium(I) complex 3. The analogous complex bis(2,2′-bipyridine)(2-picoline)chlororuthenium(II)-(hexafluorophosphate) (15), that carries a ruthenium-bonded 2-picoline molecule instead of 3, has prepared in the same way. 13 and 15 were characterized by elemental analysis, mass spectrometry, and ¹H NMR.     

Half-sandwich binuclear carbaborane compounds: Closo-carbaboranes as good σ-donar ligands

The synthesis of half-sandwich binuclear transition-metal complexes containing the Cab^C,C chelate ligands (Cab^C,C = C₂B₁₀H₁₀ (1)) is described. 1Li₂ was reacted with chloride-bridged dimers [Cp∗RhCl(μ-Cl)]₂ (Cp∗ = η⁵-C₅(CH₃)₅), [Cp′RhCl(μ-Cl)]₂ (Cp′ = η⁵-1,3-^tBu₂C₅H₃), [Cp∗IrCl(μ-Cl)]₂ and [(p-cymene)RuCl(μ-Cl)]₂ to give half-sandwich binuclear complexes [Cp∗Rh(μ-Cl)]₂(Cab^C,C) (2), [Cp′Rh(μ-Cl)]₂(Cab^C,C) [3),[Cp∗Ir(μ-Cl)]₂(Cab^C,C) (4) and [(p-cymene)Ru(μ-Cl)]₂(Cab^C,C) (5), respectively. Addition reactions of the ruthenium complex 5 with air gave [(p-cymene)₂Ru₂(μ-OH)(μ-Cl)](Cab^C,C) (6), rhodium complex 2 with LiSPh gave [Cp∗Rh(μ-SPh)]₂(Cab^C,C) (7). The complexes were characterized by IR, NMR spectroscopy and elemental analysis. In addition, X-ray structure analysis were performed on complexes 2-7 where the potential C,C-chelate ligand was found to coordinate in a bidentate mode as a bridge.     

1-Methyl-4-ferrocenylmethyl-3,5-diphenylpyrazole: A versatile ligand for palladium(II) and platinum(II)

The syntheses and characterization of two novel ferrocene derivatives containing 3,5-diphenylpyrazole units of general formula [1-R-3,5-Ph₂-(C₃N₂)-CH₂-Fc] {Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄) and R = H (2) or Me (3)} together with a study of their reactivity with palladium(II) and platinum(II) salts or complexes under different experimental conditions is described. These studies have allowed us to isolate and characterize trans-[Pd{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}₂Cl₂] (4a) and three different types of heterodimetallic complexes: cis-[M{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] {M = Pd (5a) or Pt (5b)}, the cyclometallated products [M{κ²-C,N-[3-(C₆H₄)-1-Me-5-Ph-(C₃N₂)]-CH₂-Fc}Cl(L)] with L = PPh₃ and M = Pd (6a) or Pt (6b) or L = dmso and M = Pt (8b) and the trans-isomer of [Pt{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] (7b). In compounds 4a, 5a, 5b and 7b, the ligand behaves as a neutral N-donor group; while in 6a, 6b and 8b it acts as a bidentate [C(sp²,phenyl),N(pyrazole)]⁻ group. A comparative study of the spectroscopic properties of the compounds, based on NMR, IR and UV-Visible experiments, is also reported.     

A synthetic, structural and reactivity study of [(η-C4R4)Co(η-C5H4X)] complexes, R = Me or Et; X = CHO, CHCHFc, CHCH(η-C5H4)Co(η-C4Ph4), CHC(CN)2: Unexpected formation of [(η-cyclopentadienyl)(η-3,4,5,6-tetraethyl-α-pyrone)cobalt]

The tetraethyl- and tetramethyl-cyclobutadiene complexes [(η⁴-C₄R₄)Co(η⁵-C₅H₄CHO)] R = Et, 5, R = Me, 7, and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CO₂Me)] R = Et, 6, R = Me, 8, are conveniently prepared by photolysis of the corresponding isocobaltocenium cations [(η⁴-C₄R₄)Co(η⁶-C₆H₅Me)]⁺ in acetonitrile, and subsequent treatment with Na[C₅H₄CHO] or Na[C₅H₄CO₂Me]. The aldehydes 5 and 7 undergo Wittig and Knoevenagel reactions with [FcCH₂PPh₃]I and CH₂(CN)₂, to form [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=CHFc)] and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=C(CN)₂], 11 and 15, respectively. The Horner-Wittig reaction of [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH₂P(O)(OEt)₂] with [(η⁴-C₄Ph₄)Co(η⁵-C₅H₄CHO)] yields [(η⁴-C₄R₄)Co(η⁵:η⁵-C₅H₄CHCH-C₅H₄)Co(η⁴-C₄Ph₄)], 12 and 13. [(η⁴-C₄Me₄)Co(η⁵-C₅H₄CHO)] also reacts with t-BuLi and FcLi to furnish the corresponding secondary alcohols, 16 and 17, respectively. Surprisingly, the attempted direct synthesis of 5 by reaction of Na[C₅H₅] and ethyl formate with [(η⁴-C₄Et₄)Co(CO)₂I], 1, instead yielded [(η⁵-C₅H₅)Co(η⁴-3,4,5,6-tetraethyl-α-pyrone)], 18, and a mechanistic proposal is advanced. The X-ray crystal structures of 1, 7, 8, 11(Z), 15 and 18, and also the isocobaltocenium salts [(η⁴-C₄Et₄)Co(η⁶-C₆H₅Me)][PF₆], 2, and [(η⁴-C₄Et₄)Co(η⁶-1,3,5-C₆H₃Me₃)][PF₆], 4, are reported.     

Carbon-rich organometallic materials derived from 4-ethynylphenylferrocene

Using 4-ethynylphenylferrocene (1) as the building block, a new series of rigid-rod alkynylferrocenyl precursors consisting of fluoren-9-one unit, 2-bromo-7-(4-ferrocenylphenylethynyl)fluoren-9-one (2a), 2,7-bis(4-ferrocenylphenylethynyl)fluoren-9-one (2b), 2-trimethylsilylethynyl-7-(4-ferrocenylphenylethynyl)fluoren-9-one (3) and 2-ethynyl-7-(4-ferrocenylphenylethynyl)fluoren-9-one (4) have been prepared in moderate to good yields. The acetylene complex 4 is a useful precursor for the synthesis of well-defined carbon-rich ferrocenyl heterometallic complexes, trans-[(η⁵-C₅H₅)Fe(η⁵-C₅H₄)C₆H₄CCRCCPt(PEt₃)₂Ph] (5), trans-[(η⁵-C₅H₅)Fe(η⁵-C₅H₄)C₆H₄CCRCCPt(PBu₃)₂CCRC≡CC₆H₄(η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (6), trans-[(η⁵-C₅H₅)Fe(η⁵-C₅H₄)C₆H₄CCRCCM(dppm)₂Cl] (M=Ru (7), Os (8)) (R=fluoren-9-one-2,7-diyl). All new complexes have been characterized by FTIR, NMR and UV-Vis spectroscopies and fast atom bombardment mass spectrometry (FABMS). The molecular structures of 1, 2a, 4, 6 and 8 have been determined by single-crystal X-ray studies where an ironiron through-space distance of nanosized dimension (ca. 42 Å) is observed in the trimetallic molecular rod 6. The electronic absorption, luminescence and electrochemical properties of these carbon-rich molecules were investigated and the data were correlated with the theoretical results obtained by the method of density functional theory.     

(1,2,3,4,7-Pentamethylindenyl)rhodium complexes with arene ligands

The reaction of (η⁵-C₉H₂Me₅)Rh(1,5-C₈H₁₂) (1) with I₂ gives the iodide complex [(η⁵-C₉H₂Me₅)RhI₂]₂ (2). The solvate complex [(η⁵- C₉H₂Me₅)Rh(MeNO₂)₃]²⁺ (generated in situ by treatment of 2 with Ag⁺ in nitromethane) reacts with benzene and its derivatives giving the dicationic arene complexes [(η⁵-₉H₂Me₅)Rh(arene)]²⁺ [arene = C₆H₆ (3a), C₆Me₆ (3b), C₆H₅OMe (3c)]. Similar reaction with the borole sandwich compound CpRh(η⁵-C₄H₄BPh) results in the arene-type complex [CpRh(μ-η⁵:η⁶-C₄H₄BPh)Rh(η⁵-C₉H₂Me₅)]²⁺ (4). Treatment of 2 with CpTl in acetonitrile affords cation [(η⁵-C₉H₂Me₅)RhCp]⁺ (5). The structure of [3c](BF₄)₂ was determined by X-ray diffraction. The electrochemical behaviour of complexes prepared was studied. The rhodium-benzene bonding in series of the related complexes [(ring)Rh(C₆H₆)]²⁺ (ring = Cp, Cp^∗, C₉H₇, C₉H₂Me₅) was analyzed using energy and charge decomposition schemes.     

Synthesis and thermal reaction of hydrido(selenolato) platinum(II) complex having a 9,10,11,12,14,15-hexahydro-9,10[3′,4′]-furanoanthracenyl group

The oxidative addition of selenol, HhfSeH (2, Hhf = 9,10,11,12,14,15-hexahydro-9,10[3′,4′]-furanoanthracenyl) with [Pt(η²-nb)(Ph₃P)₂] (nb = norbornene) in toluene afforded the corresponding hydrido(selenolato) Pt(II) complex [cis-PtH(SeHhf)(Ph₃P)₂] (3) as a stable compound. Refluxing a xylene solution of 3 produced two isomers of five-membered selenaplatinacycles 4 in moderate yield as an inseparable mixture. In addition, the molecular structures of HhfSeH 2 and the minor selenaplatinacycle 4a were determined by X-ray crystallography.     

Synthesis, characterization and spectroscopic studies of cyclometalated platinum(II) complexes containing meta-bis(2-pyridoxy)benzene

A series of mononuclear and binuclear cyclometalated platinum(II) complexes containing new terdentate meta-bis(2-pyridoxy)benzene ligands: 3,5-bis(2-pyridoxy)toluene (L₁H) and 3,5-bis(2-pyridoxy)-2-dodecylbenzene (L₂H): [Pt(L₁)Cl] (1), [Pt(L₂)Cl] (2), [Pt(L₁)(CH₃CN)](ClO₄) (3), {[Pt(L₁)]₂(μ-dppm)}(ClO₄)₂ (4), {[Pt(L₂)]₂(μ-dppm)}(ClO₄)₂ (5), {[Pt(L₁)]₂(μ-pyrazole)}(ClO₄) (6), {[Pt(L₂)]₂(μ-pyrazole)}(ClO₄) (7), {[Pt(L₁)]₂(μ-imidazole)}(ClO₄) (8) and {[Pt(L₂)]₂(μ-imidazole)}(ClO₄) (9), have been synthesized and characterized. These ligands are coordinated to platinum(II) in a “pincer”-like manner and the presence of pyridyl donors enhances the availability of the ligand π^∗ orbitals for electronic transition. Spectroscopic properties of these cyclometalated complexes were studied. While the non-coplanar nature of the ligands hinders ligand-ligand and metal-metal interactions in these cyclometalated complexes, the presence of long hydrocarbon side chain on ligand L₂H seems to alleviate such hindrance. Intermolecular π-π, and possibly Pt-Pt interactions were observed in complex 2 at high concentration.     

(Mesitylene)ruthenium π-complexes with benzo-15-crown-5 and dibenzo-18-crown-6

The reactions of benzo-15-crown-5 and dibenzo-18-crown-6 with 1 equiv. of [(mes)Ru(MeNO₂)₃]²⁺ (mes = 1,3,5-C₆H₃Me₃) give the mononuclear complexes [(mes)Ru(η⁶-benzo-15-crown-5)]²⁺ (1) and [(mes)Ru(η⁶-dibenzo-18-crown-6)]²⁺ (2) in 50% yield. Similar reaction with 2 equiv. of [(mes)Ru(MeNO₂)₃]²⁺ produces the dinuclear complex [(μ-η⁶:η⁶-dibenzo-18-crown-6)Ru₂(mes)₂]⁴⁺ (3) in 96% yield as a 2:3 mixture of cis- and trans-isomers. Structures of 2(OTf)₂ and trans-3(OTf)₄ were confirmed by X-ray diffraction. The NMR titration showed that mononuclear dications 1 and 2 bind Na⁺ ion less effective (K_a = 600 and 250 M^-1) than free benzo-15-crown-5 and dibenzo-18-crown-6 (K_a = 2 × 10⁵ and 5 × 10⁶ M⁻¹). The dinuclear tetracation 3 does not bind Na⁺ within measurable limits of NMR titration method. The electrochemical behaviour of complexes 1-3 was studied in propylene carbonate solution. They exhibit a partially chemically reversible Ru(II)/Ru(I) reduction, which in the case of the dinuclear complex 3 proceeds through two slightly separated steps. The redox activity of the complexes is substantially unaffected by the presence of sodium ion.     

Synthesis and properties of Zr-Co heterodinuclear complexes with a bridging bis(cyclopentadienyl) ligand

[(η⁵-C₅H₅)ZrCl₂(η⁵-C₅H₄)CMe₂(C₅H₅)] reacted with Co₂(CO)₈ to produce a heterodinuclear Zr(IV)-Co(I) complex [(η⁵-C₅H₅)ZrCl₂(η⁵-C₅H₄)CMe₂(η⁵-C₅H₄)Co(CO)₂] (3). Complex 3 underwent oxidative addition of I₂ to give [(η⁵-C₅H₅)ZrCl₂(η⁵-C₅H₄)CMe₂(η⁵-C₅H₄)CoI₂(CO)] (4) having Zr(IV) and Co(III) centers. The carbonyl ligand of 4 was easily replaced with P(OMe)₃ and PPh₃ to afford [(η⁵-C₅H₅)ZrCl₂(η⁵-C₅H₄)CMe₂(η⁵-C₅H₄)CoI₂(L)] (5: L = P(OMe)₃, 6: L = PPh₃). Structures of 5 and 6 were determined by X-ray crystallography. These Zr-Co heterodinuclear complexes catalyzed polymerization of ethylene and propylene.     

Synthesis and reactivity of homo-bimetallic Rh and Ir complexes containing a N,O-donor Schiff base

Binuclear complexes [{(η⁵-C₅Me₅)RhCl}₂(μ-bsh)] (1) and [{(η⁵-C₅Me₅)IrCl}₂(μ-bsh)] (2) containing N,N′-bis(salicylidine)hydrazine (H₂bsh) are reported. The complexes 1 and 2 reacted with EPh₃ (E = P, As) to afford cationic complexes [(η⁵-C₅Me₅)Rh(PPh₃)(κ²-Hbsh)]PF₆ (3), [(η⁵-C₅Me₅)Rh(AsPh₃)(κ²-Hbsh)]PF₆ (4), [(η⁵-C₅Me₅)Ir(PPh₃)(κ²-Hbsh)]PF₆ (5), and [(η⁵-C₅Me₅)Ir(AsPh₃)(κ²-Hbsh)]PF₆ (6) which were isolated as their hexafluorophosphate salts. Representative complexes 3 and 5 have been used as a metallo-ligand in the synthesis of binuclear complexes [(η⁵-C₅Me₅)RhCl(μ-bsh)Ru(η⁶-C₁₀H₁₄)Cl]PF₆ (7) and [(η⁵-C₅Me₅)IrCl(μ-bsh)Ru(η⁶-C₁₀H₁₄)Cl]PF₆ (8). The complexes under study have been fully characterized by analytical and spectral (FAB/ESI-MS, IR, NMR, electronic and emission) studies. Molecular structures of 1, 2, 3 and 5 have been determined crystallographically. Structural studies on 1 and 2 revealed the presence of extensive inter- and intra-molecular C-H···O and C-H···π weak bonding interactions. The complexes 1, 2, 3 and 5 moderately emit upon excitation at their respective MLCT bands.     

Syntheses and characterization of cyano-bridged homo and hetero bimetallic complexes containing η and η-cyclic hydrocarbons

The reactions of [(ind)Ru(PPh₃)₂CN] (ind = η⁵-C₉H₇) (1) and [CpRu(PPh₃)₂CN] (Cp = η⁵-C₅H₅) (2) with [(η⁶-p-cymene)Ru(bipy)Cl]Cl (bipy = 2,2′-bipyridine) (3) in the presence of AgNO₃/NH₄BF₄ in methanol, respectively, yielded dicationic cyano-bridged complexes of the type [(ind)(PPh₃)₂Ru(μ-CN)Ru(bipy)(η⁶-p-cymene)](BF₄)₂ (4) and [Cp(PPh₃)₂Ru(μ-CN)Ru(bipy)(η⁶-p-cymene)](BF₄)₂ (5). The reaction of [CpRu(PPh₃)₂CN] (2), [CpOs(PPh₃)₂CN] (6) and [CpRu(dppe)CN] (7) with the corresponding halide complexes and [(η⁶-p-cymene)RuCl₂]₂ formed the monocationic cyano-bridge complexes [Cp(PPh₃)₂Ru(μ-CN)Os(PPh₃)₂Cp](BF₄) (8), [Cp(PPh₃)₂Os(μ- CN)Ru(PPh₃)₂Cp](BF₄) (9) and [Cp(dppe)Ru(μ-CN)Os(PPh₃)₂Cp](BF₄) (10) along with the neutral complexes [Cp(PPh₃)₂Ru(μ-CN)Ru (η⁶-p-cymene)Cl₂] (11), [Cp(PPh₃)₂Os(μ-CN)Ru(η⁶-p-cymene)Cl₂] (12), and [Cp(dppe) Ru(μ-CN)Ru(η⁶-p-cymene)Cl₂] (13). These complexes were characterized by FT IR, ¹H NMR, ³¹P{¹H} NMR spectroscopy and the molecular structures of complexes 4, 8 and 11 were solved by X-ray diffraction studies.