Direct access to upper rim substituted mono- and diaryloxy calix[4]arenes via bis(spirodienone) route

A seemingly ipso-like nucleophilic substitution of the upper rim of p-tert-butylcalix[4]arene is accomplished by an indirect method involving calix[4]arene derived bis(spirodienone). This method not only provides both mono and 1,3-diaryloxy calixarenes but also enables the synthesis of upper rim monothio substituted calix[4]arenes. A modification of the methodology can be successfully extended for the selective synthesis of mono- and 1,3-diquinone calix[4]arenes having free hydroxyl groups at the lower rim, in fewer steps.     

Calix[4]tubes: a new class of potassium-selective ionophore

A new class of cryptand-like ionophore based on a bis calix[4]arene structure has been developed. These molecules proved highly selective for complexation of potassium over all group I metal cations and barium. A range of symmetric and asymmetric calix[4]tubes featuring either alkyl or phenyl substituents at the upper rim have been synthesized in exceptional yield. Alteration of the calix[4]arene upper rim environment enables fine-tuning of the rate of potassium uptake, which can be evaluated through the conformational change on binding by NMR studies. Selectivity of potassium complexation has been demonstrated using NMR and electrospray mass spectral techniques. Molecular modeling studies, derived from crystallographic data, confirm that the potassium metal cation is complexed via the axial route, passing through the calix[4]arene annulus, and provide evidence for complexation rate and selectivity.     

上端含长链烷基的手性杯[4]芳烃合成

脱叔丁基的杯[4]芳烃与长链的叔醇或者叔氯代烷烃进行傅-克反应, 在其上端引入长链烷基. 然后在下端引入光学活性的1-苯基乙胺基团, 得到了一系列上端含长链烷基的手性杯[4]芳烃.     

A novel method for the upper rim alkoxy-substitution of calix[4]arene via a bis(spirodienone) route

A mild and efficient one-step procedure for the upper rim modification of calix[4]arene via a bis(spirodienone) is described. The bis(spirodienone) on reaction with alcohols in the presence of p-TSA affords mono- and 1,3-disubstituted alkoxy derivatives in moderate to good yields.     

A new fluorescent chemosensor for copper(II) and molecular switch controlled by light

A novel fluorescent chemosensor with two 5-nitro-salicylaldehyde groups at the upper rim of calix[4]arene has been synthesized. The chemosensor can effectively recognize copper(II) ion. This system could be considered as a molecular switch. By alternating the light irradiation of mixed solution formed by the host and Cu²⁺, off-on-off fluorescent switching is carried out.     

Synthesis and crystal structures of novel calix[4]azacrowns

A series of novel 1,3‐altemate calix[4]arene azacrowns having mono and bis crown ethers on the lower rim of the calix[4]arene framework were synthesized. Solid‐state structures confirmed the three dimensional conformation of compounds 1–3.     

Synthesis, structure, and properties of nitronyl nitroxyl tetraradical with calix[4]arene framework

A reaction of calix[4]arene tetraaldehyde with 2,3-bis(hydroxyamino)-2,3-dimethylbutane in DMF resulted in the corresponding 1,3-dihydroxyimidazolidine tetraadduct, whose oxidation gave a calix[4]arene (1,3-alternate) bearing four nitronyl nitroxyl-containing substituents at the upper rim.     

New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.     

Influence of core configuration and arm structure on solution properties of new thermosensitive star-shaped poly(2-alkyl-2-oxazolines)

New thermoresponsive star-shaped poly(2-isopropyl-2-oxazoline) (PiPrOx) and poly(2-ethyl-2-oxazoline) (PEtOx) with arm grafting to upper rim of calix[8]arene core were synthesized and studied in aqueous solutions by light scattering and turbidimetry methods. The solution behavior was compared with that for polyoxazoline stars with varying positions of arm grafting, i.e., to lower rim of calix[8]arene. The observed growth of the phase separation temperature for PiPrOx as compared to PEtOx is explained by different dehydration temperatures of ethyl- and isopropyloxazoline units. The phase separation temperatures decrease after the changeover from lower rim grafting to upper rim one due to varying configurations of calix[8]arene.     

Upper Rim Diester—bridged Calix[4] arenes and Oligocalix [4]—arenes：the Effects of the Length of Bridged Reagents on Their Distribution

A series of monobridged calix [4] arenes 3a-f,cyclic biscalix-[4] arenes 4a-f ,diametrically bridged at the upper rim with saturated aliphatic diester chians,have been synthesized,The results at diluted conditions show that the percentage of yields of mono-,bis- and oligo-calix[4] arenes are related to the legth of the chains ,With the shortening of the chains ,the percent-age of monocalix[4] arenes decreased ,All the calix [4] arene moieties are in a cone conformaiton according to the AB quar-tet pattern of the methylene protons between the phenolic rings in the ^1H NMR spectra.     

High-performance Liquid Chromatography Study of the Nitration Course of Tetrabutoxycalix[4]arene at the Upper Rim:Determination of the Optimum Conditions for the Preparation of 5,11,17-Trinitro-25,26,27,28-tetrabutoxycalix[4]arene

A selective nitration of calix[4]arene at the upper rim in one pot process was described by monitoring the time dependence of the distribution of products by high‐performance liquid chromatography (HPLC). The discrimination of five nitrated products was accomplished by molecular symmetry considerations and ¹H NMR analysis. As a result, unusual 5,11,17‐trinitrocalix[4]arene ( 2d ) was obtained in 57% isolated yield. 5,11‐Dinitro‐calix[4]arene ( 2b ) and 5,11,17‐trinitrocalix[4]arene ( 2d ) with tetranitrocalix[4]arene 2e were further characterized by crystal X‐ray diffraction analysis. Furthermore, as an example of potential application, trinitrocalix[4]arene 2d could be converted to triaminocalix[4]arene 3d conveniently.     

Glycoside-clustering round calixarenes toward the development of multivalent ligands. Synthesis and conformational analysis of Calix[4]arene O- and C-glycoconjugates

Bis- and tetra-O- and C-glycosyl calixarenes (calixsugars) have been prepared by tethering carbohydrate moieties to a tetrapropoxycalix[4]arene scaffold through alkyl chains. Two methodologies have been employed. One consisted of the stereoselective multiple glycosylation of upper rim calix[4]arene polyols leading to calix-O-glycosides; the other involved a multiple Wittig olefination of upper rim calix[4]arene-derived polyaldehydes by the use of sugar phosphoranes and reduction of the alkene double bonds affording calix-C-glycosides. The NMR spectra and NOE experiments of bis-glycosylated products indicate that compounds bearing sugar-protected residues exist preferentially in solution in a flattened cone arrangement (far conformation) whereas deprotected derivatives adopt a close conformation. Calculations by molecular mechanics of the latter compounds point to a close conformation as well in gas phase.     

Exchange coupling mediated through-bonds and through-space in conformationally constrained polyradical scaffolds: calix[4]arene nitroxide tetraradicals and diradical

Calix[4]arenes constrained to the 1,3-alternate conformation and functionalized at the upper rim with four and two tert-butylnitroxides have been synthesized and characterized by X-ray crystallography, magnetic resonance (EPR and (1)H NMR) spectroscopy, and magnetic studies. The 1,3-alternate nitroxide tetraradical and diradical provide unique polyradical scaffolds for dissection of the through-bond and through-space intramolecular exchange couplings. In addition, detailed magnetic studies of the previously reported calix[4]arene nitroxide tetraradical, which possesses cone conformation in solution, reveal conformational dependence of exchange coupling. Through-bond coupling between the adjacent nitroxide radicals is mediated by the nitroxide-m-phenylene-CH(2)-m-phenylene-nitroxide coupling pathway, and through-space coupling is found between the diagonal nitroxide radicals at the conformationally constrained N...N distance of 5-6 A. Magnetic studies of the calix[4]arene polyradical scaffolds in frozen solutions show that the through-bond exchange coupling in the 1,3-alternate calix[4]arene tetraradical is antiferromagnetic, while that in cone calix[4]arene tetraradical is ferromagnetic. The through-space exchange couplings are antiferromagnetic in both cone and 1,3-alternate calix[4]arene tetraradical, as well as in the 1,3-alternate calix[4]arene diradical. The exchange coupling constants (|J/k|) are of the order of 1 K.     

Selectively formylated and bridged calix[6]arene derivatives at the upper rim

The strategy of bridging the anisole units at the upper rim of calix[6]arene has been applied to strain the conformations of calix[6]arene. Based on the selective formylation of the 1,3,5-tri-p-tert-butylcalix[6]arene, several new calix[6]arene derivatives with different 1,3-bridged chains or a 1,3,5-tripod bridge at the upper rim have been prepared with moderate yields. The ¹H NMR spectra indicate that these calix[6]arene derivatives adopt a cone conformation, which has also been confirmed by the theoretical calculation at AM1 level. X-ray crystal structure of 1,3,5-tripod bridged compound 5 discloses that the calix[6]arene host stands in a cone conformation with approximate C_3v symmetry, and that a methanol molecule is enclosed in its hydrophobic cavity and stabilized by multi hydrogen bonds.     

Diastereoselective lower rim (1S)-camphorsulfonylation as the shortest way to the inherently chiral calix[4]arene

[structure: see text]. A diastereomeric mixture of chiral 25-(1S)-camphorsulfonyloxy-26-isopropoxycalix[4]arene 2a (de 15%) and 25-isopropoxy-26-((1S)-10-camphorsulfonyl)calix[4]arene 2b has been obtained by asymmetrical lower rim (1S)-camphorsulfonylation of the monoisopropoxycalix[4]arene. Pure diastereomer 2a has been obtained by simple crystallization, and its absolute configuration has been determinated by X-ray analysis. Enantiomerically pure inherently chiral 5,11-dibromo-26-isopropoxycalix[4]arene 4 has been synthesized by the upper rim dibromination of the diastereomer 2a followed by hydrolytical removal of the auxiliary camphorsulfonyl group.     

Synthesis of upper rim calix[4]arene divalent glycoclusters via amide bond conjugation

Synthetic routes for linking two sugar units at the upper rim of cone calix[4]arenes, through the formation of amide bonds, have been explored. Steric effects prevent the coupling of calix[4]arene dicarboxylic acid with simple aminoglycosides, whereas the corresponding reaction with carbohydrates bearing a two or three carbon atoms spacer, terminating with a primary amino group, allows the synthesis of several difunctionalized calix[4]arene neoglycoconjugates, attractive in chemical glycobiology and supramolecular chemistry.     

Differential and substrate-selective reactivity of calix[4]arene derivatives with cyclenyl-Zn(II) modifications at the upper rim

[structure: see text] Novel "cone conformation" calix[4]arene derivatives, carrying either one or two cyclen (1,4,7,10-tetra-azacyclododecane) moieties at the upper rim, have been synthesized. The hydrolytic activities of the Zn(II) complexes of these calixarenes were studied. A surprising behavior was observed with p-nitrophenylstearate; whereas the bis-cyclenyl-2Zn(II) complex showed negligible hydrolytic activity over the background, the mononuclear complex showed a significant 400-fold rate increase at pH 8.5.     

Calix[4]arenes with 1,2- and 1,3-upper rim tetrathiafulvalene bridges

Herein we report the synthesis of several calix[4]arene derivatives with tetrathiafulvalene bridges at the upper rim. Calix[4]arene-tetrathiafulvalene (TTF) conjugates 4a–d, fixed in cone conformation and comprising two smaller 1,2-bridges, were prepared by cyclisation of tetrakis-chloromethylated calix[4]arene 1 with 2,3-dithiolates of TTFs. Larger calix[4]arene-TTF macrocycles 14 and 15, also in cone conformation, contain 1,3-bridges and were synthesised by cyclisation of 2,6- and 2,7-dithiolates of TTFs with bis-bromomethylated calix[4]arene 7. Redox properties of new calix[4]arene-TTF conjugates were characterised using cyclic voltammetry.     

Tetrazolecalix[4]arenes as new ligands for palladium(II)

The synthesis of new calix[4]arenes bearing two or four tetrazole liganting groups at the upper rim is decribed. The structures of tetrakis-tetrazolecalix[4]arene and its palladium dichloride (2:2) complex are examined by X-ray crystallography.     

Syntheses of Chiral Calix [4] arene Derivatives Bearing Amino Acid Residue

The syntheses of chirai calix[4]arene derivatives bearing amino acid residue at the lower rim or upper rim by three different methods were reported.