Quantitative determination of lansoprazole in human serum by HPLC

Summary Lansoprazole is a new inhibitor of gastric proton secretion. An HPLC method for the quantitative determination of lansoprazole in serum is described. The method consists of liquid-liquid extraction and enrichment of the analyte and subsequent reverse-phase liquid chromatography with UV detection. The method is specific, sensitive and practical. It has been applied to serum from healthy volunteers. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

On-line determination of bipyridylium herbicides in water by HPLC

Summary Selective on-line solid phase extraction (SPE) and liquid chromatography determination (HPLC) of diquat, paraquat and difenzoquat from environmental water samples has been accomplished with Graphitized Carbon Black (GCB) as both extraction and analytical columns. The method involved passing of 50 mL of water through a cartridge filled with Carbograph. In the elution step, the herbicides were transferred from the cartridge to the analytical column (Hypercarb) by mean of a gradient of pH 3 aqueous solution of tetramethylammonium hydroxide (TMAOH) and ammonium sulphate and methanol. Hypercarb columns were found to give a low probability of false positives for bypiridylium herbicides and are very selective for polar compounds. Recovery was better than 80 %. The breakthrough volume was studied with distilled water spiked with the herbicides at various concentration levels (from 0.1 to 20 μg L⁻¹). The limits of quantification of the method were lower than 0.1 μg L⁻¹. The total analytical method was applied to surface waters from Torreblanca Nature Park (Castelló, Spain). Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996.     

Analysis of organic pollutants in water at trace levels using fully automated solid-phase extraction coupled to high-performance liquid chromatography

Summary A method has been developed for the determination of trace levels of 32 pesticides, 19 explosives and 16 polycyclic aromatic hydrocarbons (PAH) in water in three individual steps. Solid-phase enrichment (SPE) is coupled to high-performance liquid chromatography (HPLC) with a fully automated system. The organic pollutants are enriched on reusable cartridges packed with adsorbent materials: pesticides and explosives on a mixed bed of divinylbenzene-ethylvinylbenzene copolymers (LiChrolut EN^?) and perfluorinated polyethylene (PolyF^?), and polycyclic aromatic hydrocarbons on C₁₈-modified silica (Zorbax^? ODS1). Thermally assisted desorption (TAD) has been shown to increase the recovery of analytes significantly. As all enriched analytes are transferred to the detector, only fifty millilitres of sample is needed for each single on-line analysis, compared with at least a litre for conventional methods. The separation of the enriched organic analytes is performed on specialized HPLC columns based on reversed-phase materials. The limits of detection of the system employed were found to be below 100 ng L⁻¹. Use of fluorescence detection for the polycyclic aromatic hydrocarbons resulted in limits of detection in the upper pg L⁻¹ range. Thek values, number of theoretical plates, the recovery rates and the limits of detection of this method for fast screening of organic pollutants from three fifty-millilitre aqueous samples are described. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Chromatographic and spectral behaviour and detection of hepatotoxic nodularin in fish, clam, mussel and mouse tissues using HPLC analysis

Summary High-performance liquid chromatography (HPLC) was applied in the analysis of nodularin (NODLN), a potent, bioaccumulable hepatotoxin. The behaviour of NODLN in biological matrices and possibility to analyse biota samples for NODLN content was examined using a conventional HPLC/diode array detector method that uses C₁₈ solid-phase cartridge clean up. Tissues of European flounder, blue mussel (spiked and naturally contaminated), clam (exposed to NODLN in an aquariuml and mouse (subjected to i. p. administration of NODLN) were analysed. UV detection was 5 times more sensitive than electrochemical detection. Recovery of NODLN from spiked tissues was 59% for mussel, 53% for flounder, and 44–75% for mouse tissues. NODLN was detected in clams exposed with NODLN, but not in naturally contaminated mussels where NODLN conjugation occurs. Through the use of spectral processing, free NODLN was unambiguously identified from tissue samples. The HPLC method showed limits of quantification between 90 and 150 μg NODLN kg⁻¹ dw. The method proved applicable for routine tissue analysis and can be used in the monitoring of acutely toxic NODLN levels.     

Nitro musks in cosmetic products—determination by headspace solid-phase microextraction and gas chromatography with atomic-emission detection

Summary The combination of headspace solid-phase microextraction with atomic-emission detection enables highly selective and sensitive determination of itro musk compounds in cosmetic products. Sample preparation is considerably simplified; there is no solvent extraction step. Enrichment is influenced by the type and amount of cosmetic product investigated. The lowest amount giving well detectable peaks is 1 mg musk compound per kg sample. Calibration curves obtained from spiked solutions of selected reference cosmetics in water show very good linearity. Relative standard deviations of peak areas from repeated measurements are usually <10%. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Determination of inorganic anions, carboxylic acids and amino acids in plant matrices by capillary zone electrophoresis

Summary Physiological investigations of solute transport in plants affords knowledge of solute distribution between different tissues. Capillary electrophoresis using indirect UV and laser induced fluorescence (LIF) detection is demonstrated as a useful technique for the simultaneous determination of inorganic anions, amino acids and carboxylic acids in plant samples. Cell sap obtained from plant tissues as well as simple ethanolic or aqueous plant extracts can be analysed directly without any pretreatment. This matrix stability and the very small volumes required allow fast determinations of various compounds in small plant tissue sections. In the case of carboxylic acids, resolution can be optimized using calcium for selective complexation of some of the compounds. Selective and sensitive determination of amino acids is possible using precolumn derivatisation with orthophthaldialdehyde (OPA) and laser induced fluorescence detection. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Determination of adapalene (CD271/differin®) and retinol in plasma and tissue by on-line solid-phase extraction and HPLC analysis

Summary Adapalene, the active constituent of Differin^?, is a novel potent retinoid (vitamin A analogue) for the topical treatment of acne vulgaris. The clinical usefulness of retinoids is limited by a number of side effects, such as teratogenicity and skin irritation. A method has been developed for simultaneous determination of adapalene and retinol in plasma and tissue in in vivo and in vitro studies for the determination of the pharmacokinetic profile and the influence of adapalene on the endogenous retinol level. The new method was developed by coupling an autosampler to an automated solid-phase extraction unit on-line with a gradient HPLC system using UV and fluorescence detection. The low detection limit (0.25 ng mL⁻¹ for adapalene), the small sample weight (50 mg) and the high degree of automation make this method convenient for analysis of biological samples in animal and human studies. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996.     

A new porous-layer activated-charcoal-coated fused silica fiber: Application for determination of BTEX compounds in water samples using headspace solid-phase microextraction and capillary gas chromatography

Summary Extra-fine powdered activated charcoal has been used as stationary phase (coating layer) in solid-phase microextraction (SPME). The efficiency and reliability of the prepared device have been investigated for the extraction of some volatile organic compounds such as benzene, toluene, ethylbenzene and xylene isomers (BTEX) from the headspace of water samples. Monitoring of the extracted compounds and further quantitative analysis of the real samples have been performed by capillary GC-FID. Effects of several factors such as temperature, addition of salt, and stirring speed on extraction efficiency and exposure time have been studied. Under optimum conditions, extraction recoveries for these compounds from 50 mL water were >95%. The calibration graphs were linear in the range 5 to 10⁴ pg mL⁻¹ and the detection limit for each BTEX compound was 1.5–2 pg mL⁻¹. The results obtained by use of this porous layer activated charcoal (PLAC)-coated fiber have also been compared with results reported in the literature by use of a polydimethylsiloxane (PDMS)-coated fiber. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Use of a keeper to enhance the recovery of volatile polycyclic aromatic hydrocarbons in HPLC analysis

Summary The recorveries of volatile polycyclic aromatic hydrocarbons in HPLC analysis may be enhanced if a long-chain alcohol, e.g. 1-hexanol or 1-octanol, is used as keeper in the solvent-evaporation step. Even under the harsh conditions of the vacuum-concentrator centrifuge, recoveries of more than 90% were achieved for 14 of the 15 PAH tested. The use of liquid-liquid extraction (LLE) eliminates the problem of adsorption of highly condensed aromatics by the wall of the sampling bottle. The combination of LLE with vacuum-controlled rotary evaporation and use of a keeper yielded overall recoveries between 50 and 130%, for most substances close to 100%, from tap water spiked with trace concentrations. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Simultaneous Determination of Cyanazine, Chlorotoluron and Chlorbenzuron in Environmental Water Samples with SPE Multiwalled Carbon Nanotubes and LC

In this paper, a new method based on solid-phase extraction with multiwalled carbon nanotubes as the packed materials for sensitive determination of cyanazine, chlorotoluron and chlorbenzuron in environmental water samples was demonstrated. Related parameters that may influence the enrichment efficiency of multiwalled carbon nanotubes such as the kind and volume of elute, sample flow rate, sample pH, and volume of the water samples were investigated. Under the optimum conditions, the detection limits of cyanazine, chlorbenzuron and chlorotoluron were 0.015, 0.012, 0.034 ng mL⁻¹, respectively. The experimental results indicated a good linearity (R ² > 0.9947) over the concentration range of 0.4–40 ng mL⁻¹ for cyanazine and chlorotoluron, and 0.8–80 ng mL⁻¹ for chlorbenzuron. The relative standard deviations of the three analytes were 3.54, 1.55 and 1.38%, respectively. The established method also was applied to the analysis of the real-world water samples and excellent achievements were obtained with average spiked recoveries from 87.8 to 110.1%. All the results indicated that this procedure could allow the simultaneous determination of these three compounds in environmental water samples at trace levels.     

Determination of Nitrophenols in Water Using Dynamic Liquid‐Liquid‐Liquid Microextraction under Non‐Equilibrium Consideration

To pursue optimum condition in liquid‐liquid‐liquid microextraction (LLLME), extraction parameters dominating extraction efficiency were investigated by theoretical considerations. The theoretical considerations discussed equilibrium model for equilibrium LLLME and non‐equilibrium model for dynamic LLLME. A method described here is a dynamic LLLME technique combined with high‐performance liquid‐chromatography ultraviolet absorbance detection (HPLC/UV) to determine traces of nitrophenols in water. Analytical parameters such as organic phase, acceptor phase volume, sample agitation, extraction time, acceptor phase NaOH concentration, donor phase HCl concentration, salt addition, and absorption wavelength were identified as variable settings. Relative standard deviation (RSD, 1.8‐4.4%), coefficient of estimation (R², 0.9994‐0.9999), and detection limit (0.032‐0.065 ng mL^?1) were achieved under the variable settings. The proposed method was successfully applied to the analysis of a lake water sample, and the relative recoveries of nitrophenols from spiked water sample were up to 92.5%. The variable settings of LLLME close to optimization was responsible for an acceptable extraction efficiency.     

Solid-phase extraction-liquid chromatography-fluorimetry for organotin speciation in natural waters

Summary A method is reported for the determination of dibutyltin (DBT), diphenyltin (DPhT), tributyltin (TBT), and triphenyltin (TPhT) species at the nanogram per litre concentration level in natural water samples. Analytes were isolated from samples by solid-phase extraction and analysed both off-line and on-line by reversed-phase high-performance liquid chromatography with post-column derivatization and fluorimetric detection. Several SPE cartridges and eluents were evaluated; C₁₈ enrichment and elution with a mixture of methanol, acetic acid, and water was found most suitable. Preconcentration factors up to 250 can be achieved when a 500-mL sample is processed. Detection limits, recovery rates, and the precision of the whole process have been determined. The method has been applied to the determination of organotin species in spiked natural water samples collected on the NW Mediterranean coast. Recovery rates range from 75 to 110% and detection limits are at the low ng L⁻¹ level (1–3 ng Sn L⁻¹ for DPhT, DBT, and PhT and 40 ng Sn L⁻¹ for TBT when 250 mL spiked sea water is processed.)     

Determination of eleven priority EPA phenolics at ng L−1 levels by on-line solid-phase extraction and liquid chromatography with UV and electrochemical detection

Summary The eleven priority, EPA phenolic pollutants were determined by liquid chromatography followed by two detectors in series; UV and electrochemical. Three different adsorbents, Envi-Carb (a carbon black) and two functionalized polymeric resins, Bond Elut PPL and another synthesized in our laboratory with an ocarboxybenzoyl moiety, were compared for solid-phase extraction (SPE) to detect lower concentrations of the eleven phenolics in natural waters. Higher recoveries were obtained using the functionalized polymeric adsorbents compared with Envi-Carb. When real samples were analysed, the synthetic adsorbent gave lower interference than Bond Elut PPL and phenol was determined at low levels with no humic and fulvic acid inter-ference when Na₂SO₃ was added. The linearity range for most compounds in tap water was 0.05–20 μg L⁻¹ and the limits of detection were <35 ng L⁻¹. Repeatability and reproducibility between days for real samples spiked at 0.1 μg L⁻¹, expressed as relative standard deviation, were <8% and 10%, respectively.     

Dispersive liquid-phase microextraction using ionic liquid as extractant for the enrichment and determination of DDT and its metabolites in environmental water samples

Ionic liquids are a kind of environmentally friendly solvents which have drawn great attention in many fields. The potential of ionic liquid as dispersive liquid-phase microextraction (DLPME) solvent for the enrichment of typical persistent organic pollutants, dichlorodiphenyltrichloroethane (DDT), and its metabolites including 1,1-dichloro-2,2-bis-(4′-chlorophenyl)ethane and 1,1-dichloro-2,2-bis-(4′-chlorophenyl)ethylene has been investigated. Parameters that may influence the extraction efficiency, such as the type and volume of ionic liquid, the type and volume of disperser solvent, extraction time, and sample pH, were investigated and optimized in detail. The experimental results showed the excellent linear relationship between peak area and the concentration of DDT and its metabolites over the range of 1–50 μg L⁻¹, and the precisions (RSDs) were 5.27–6.73% under the optimal conditions. The limits of detection could reach 0.33–0.63 μg L⁻¹. Satisfied results were achieved when the proposed method was applied to determine the target compounds in real-world water samples with spiked recoveries over the range 94.4–115.3%. All these facts indicated that ionic liquid DLPME coupled to HPLC was an environmentally friendly alternative for the rapid analysis of DDT and its metabolites at trace level in environmental water samples.     

Analysis of normal and modified nucleosides in urine by capillary electrophoresisa)

Summary Modified nucleosides excreted in urine have been studied as potential diagnostic markers for cancer and AIDS, and as indicators for the whole-body turnover of RNA. Until now, reversed-phase (RP) HPLC and, to some extent, immunoassays are the preferred analytical methods for urinary nucleosides. A new capillary electrophoretic method for the analysis of normal and modified nucleosides in urine has been developed and optimized in our laboratory. The separation of nucleosides extracted from normal human urine on phenyl boronic acid affinity chromatography columns was performed in uncoated 565 mm (500 mm to detection window) × 50 μm i.d. capillary tubing using a 300 mM SDS—25 mM borate—50 mM phosphate buffer (pH 6.7), a 45-s load, a voltage of 7.5 kV (41 μA) and UV detection at 260 and 210 nm. The average recovery of the nucleosides was 91 %. The calibration curves were linear over all physiological and pathophysiological concentration ranges and the limits of detection were at micromolar levels. Reproducibility of migration times were better than 1 % (coefficient of variation,CV), and the reproducibilities of the determined concentrations were better than 5 % for standards and 6–15 % for extracted urine. The developed method was used to quantify 15 normal and modified nucleosides in 25 normal urines to establish reference ranges. The analysis time was less than 45 min. Dedicated to Professor E. Bayer on the occasion of his 70th birthday. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996.     

Purity testing of sulfonic acids of different chain length by capillary electrophoresis

Summary A CZE method has been developed for the purity testing of sulfonic acids. By use of an optimized electrolyte system, short analysis times and high resolution (R _S=2–4) can be achieved for inorganic anions and for alkyl sulfonic acids from methane-1- to decane-1-sulfonic acid. By use of indirect UV detection by-products of different sulfonic acids can be determined at the 2 m level, equivalent to 0.02%,w/w. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Voltammetry and amperometric detection of tetracyclines at multi-wall carbon nanotube modified electrodes

The voltammetric behaviour and amperometric detection of tetracycline (TC) antibiotics at multi-wall carbon nanotube modified glassy carbon electrodes (MWCNT-GCE) are reported. Cyclic voltammograms of TCs showed enhanced oxidation responses at the MWCNT-GCE with respect to the bare GCE, attributable to the increased active electrode surface area. Hydrodynamic voltammograms obtained by flow-injection with amperometric detection at the MWCNT-GCE led us to select a potential value E _det = +1.20 V. The repeatability of the amperometric responses was much better than that achieved with bare GCE (RSD ranged from 7 to 12%), with RSD values for i _p of around 3%, thus demonstrating the antifouling capability of MWCNT modified electrodes. An HPLC method with amperometric electrochemical detection (ED) at the MWCNT-GCE was developed for tetracycline, oxytetracycline (OTC), chlortetracycline and doxycycline (DC). A mobile phase consisting of 18:82 acetonitrile/0.05 mol L⁻¹ phosphate buffer of pH 2.5 was selected. The limits of detection ranged from 0.09 μmol L⁻¹ for OTC to 0.44 μmol L⁻¹ for DC. The possibility to carry out multiresidue analysis is demonstrated. The HPLC-ED/MWCNT-GCE method was applied to the analysis of fish farm pool water and underground well water samples spiked with the four TCs at 2.0 × 10⁻⁷ mol L⁻¹. Solid-phase extraction was accomplished for the preconcentration of the analytes and clean-up of the samples. Recoveries ranged from 87 ± 6 to 99 ± 3%. Under preconcentration conditions, limits of detection in the water samples were between 0.50 and 3.10 ng mL⁻¹.     

Application of matrix solid-phase dispersion to the determination of amitrole and urazole residues in apples by capillary electrophoresis with electrochemical detection

A new method based on matrix solid-phase dispersion (MSPD) extraction was studied for the extraction of amitrole (3-amino-1,2,4-triazole), and its metabolite urazole (3,5-dihydroxy-1,2,4-triazole), in apple samples. The influence of experimental conditions on the yield of the extraction process and on the efficiency of the cleanup step was evaluated. Determination was carried out by capillary electrophoresis (CE) with electrochemical detection, demonstrating the compatibility between MSPD and CE techniques. The method has been successfully applied to different apple varieties. Recoveries in samples spiked at 1.6 and 1.7 μg g⁻¹ for amitrole and urazole were 88 and 82%, respectively. The limits of detection were 0.4 μg g⁻¹ for both compounds using electrochemical detection.     

Analysis of the characteristic PSP profiles ofPyrodinium bahamense and several strains ofAlexandrium by HPLC based on ion-pair chromatographic separation, post-column oxidation, and fluorescence detection

Summary A sensitive HPLC method for determination of paralytic shellfish poisoning (PSP) based on ion-pair chromatographic separation of PSP toxins, post-column oxidation with periodic acid, and fluorescence detection has been used to determine toxin profiles ofPyrodinium bahamense and several strains ofAlexandrium. The HPLC chromatograms revealed clear differences betweenPyrodinium bahamense andAlexandrium strains. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996.     

Enantiomeric resolution of persistent compounds of technical toxaphene (CTTs) on t-butyldimethylsilylated β-cyclodextrin phases

Summary Eight of the most important single compounds of technical toxaphene were separated on t-butyldimethylsilylated β-cyclodextrin (β-BSCD) diluted in a medium polar phase using gas chromatography with electron capture detectors (GC-ECD). The enantiomeric resolution of all compounds was obtained in one GC run. The β-BSCD phase also separated the enantiomers of oxychlordane, cis- and trans-chlordane as well as α-HCH. Problems in the enantioselective determination of CTTs in biological samples are discussed. Finally, the enantioselective determination of the two most recalcitrant CTTs in biological samples was achieved using electron capture negative ionization mass spectrometry (GC-ECNI-MS) in the single ion monitoring (SIM) mode. Presented at the 21^st ISC held in Stutgart, Germany, 15^th–20^th September, 1996.