Odd-even effect of the methylene chain number in the template polymerization of alpha,beta-diacetylenecarboxylates incorporated in layered double hydroxide clay

The present investigation reports on the significant differences observed in the efficiency of the polymerization depending on the odd- or even-numbered methylene chains of diacetylenecarboxylates, CH3(CH2)(m-1)C[triple bond]C-C[triple bond]C(CH2)(n-1)CO2- (mono-[m,n]), incorporated in layered double hydroxide (LDH) clay. Upon gamma-ray irradiation of the diacetylenecarboxylates, or mono-[m,n], in LDH clay, polymer hybrids or poly-[m,n]/LDH, which exhibited coloring from light orange to violet, were obtained. The color of the poly-[m,n]/LDH hybrids was strongly dependent on the extent of the polymerization degrees. Moreover, the polymerization degrees were controlled by the number of methylene spacers n between the carboxyl and diacetylene groups. An odd-numbered n for the methylene chain of mono-[m,n] was found to be the determining factor in the efficient polymerization of these self-assembling aggregates within the interlayers of LDH clay.     

Synthesis of Polysiloxane-Bound (Ether-phosphine)palladium Complexes. Stoichiometric and Catalytic Reactions in Interphases(1)

The reaction of two equiv of the monomeric ether-phosphine O,P ligand (MeO)(3)Si(CH(2))(3)(Ph)PCH(2)-Do [1a(T(0)()), 1b(T(0)())] {Do = CH(2)OCH(3) [1a(T(0)())], CHCH(2)CH(2)CH(2)O [1b(T(0)())]} with PdCl(2)(COD) yields the monomeric palladium(II) complexes Cl(2)Pd(P approximately O)(2) [2a(T(0)())(2)(), 2b(T(0)())(2)()]. The compounds 2a(T(0)())(2)() and 2b(T(0)())(2)() are sol-gel processed with variable amounts (y) of Si(OEt)(4) (Q(0)()) to give the polysiloxane-bound complexes 2a(T(n)())(2)()(Q(k)())(y)(), 2b(T(n)())(2)()(Q(k)())(y)() (Table 1) {P approximately O = eta(1)-P-coordinated ether-phosphine ligand; for T(n)() and Q(k)(), y = number of condensed T type (three oxygen neighbors), Q type (four oxygen neighbors) silicon atoms; n and k = number of Si-O-Si bonds; n = 0-3; k = 0-4; 2a(T(n)())(2)()(Q(k)())(y)(), 2b(T(n)())(2)()(Q(k)())(y)() = {[M]-SiO(n)()(/2)(OX)(3)(-)(n)()}(2)[SiO(k)()(/2)(OX)(4)(-)(k)()](y)(), [M] = (Cl(2)Pd)(1/2)(Ph)P(CH(2)Do)(CH(2))(3)-, X = H, Me, Et}. The complexes 2b(T(n)())(2)()(Q(k)())(y)() (y = 4, 12, 36) show high activity and selectivity in the hydrogenation of 1-hexyne and tolan. The dicationic complexes [Pd(P&arcraise;O)(2)][SbF(6)](2) [3a(T(0)())(2)(), 3b(T(0)())(2)()] are formed by reacting Cl(2)Pd(P approximately O)(2) with 2 equiv of a silver salt {P&arcraise;O = eta(2)-O&arcraise;P-coordinated ether-phosphine ligand; 3a(T(0)())(2)(), 3b(T(0)())(2)() = [M]-SiOMe(3); [M] = {[Pd(2+)](1/)(2)P(Ph)(CH(2)CH(2)OCH(3))(CH(2))(3)-}{SbF(6)} (a), {[Pd(2+)](1/)(2)P(Ph)(CH(2)CHCH(2)CH(2)CH(2)O)(CH(2))(3)-}{SbF(6)} (b)}. Their polysiloxane-bound congeners 3a(T(n)())(2)(), 3b(T(n)())(2)() {[M]-SiO(n)()(/2)(OX)(3)(-)(n)} are obtained if a volatile, reversible bound ligand like acetonitrile is employed during the sol-gel process. The bis(chelate)palladium(II) complexes 3a(T(n)())(2)(), 3b(T(n)())(2)() are catalytic active in the solvent-free CO-ethene copolymerization, producing polyketones with chain lengths comparable to those obtained with chelating diphosphine ligands. The polysiloxane-bound palladium(0) complexes 5a(T(n)())(2)()(Q(k)())(4)(), 5b(T(n)())(2)()(Q(k)())(4)() {[M]-SiO(n)()(/)(2)(OX)(3)(-)(n)}(2)[SiO(k)()(/2)(OX)(4)(-)(k)](4), [M] = [(dba)Pd](1/)(2)P(Ph)(CH(2)Do)(CH(2))(3)-} undergo an oxidative addition reaction with iodobenzene in an interphase with formation of the complexes PhPd(I)(P approximately O)(2).4SiO(2) [6a(T(n)())(2)()(Q(k)())(4)(), 6b(T(n)())(2)()(Q(k)())(4)()] {[M]-SiO(n)()(/)(2)(OX)(3)(-)(n)](2)[SiO(k)()(/2)(OX)(4)(-)(k)](4), [M] = [PhPd(I)](1/2)P(Ph)(CH(2)Do)(CH(2))(3)-}, which insert carbon monoxide into the palladium-aryl bond even in the solid state.     

Structural diversity in a family of copper(I) thioether complexes

Copper(I) complexes of the tridentate thioether ligands [PhB(CH(2)SCH(3))(3)] (abbreviated PhTt), [PhB(CH(2)SPh)(3)] (PhTt(Ph)), [PhB(CH(2)S(t)()Bu)(3)] (PhTt(t)()(Bu)), and [PhB(CH(2)S(p)()Tol)(3)] (PhTt(p)()(Tol)) and bidentate thioether ligands [Ph(2)B(CH(2)SCH(3))(2)] (Ph(2)Bt), [Et(2)B(CH(2)SCH(3))(2)] (Et(2)Bt), and [Ph(2)B(CH(2)SPh)(2)] (Ph(2)Bt(Ph)) have been prepared and characterized. The solution and solid state structures are highly sensitive to the identity of the borato ligand employed. Ligands possessing the smaller (methylthio)methyl donors, [PhTt] and [Ph(2)Bt], yielded tetrameric species, [(PhTt)Cu](4) and [(Ph(2)Bt)Cu](4), containing both terminal and bridging thioether ligation. The ligands containing the larger (arylthio)methyl groups, [PhTt(Ph)] and [PhTt(p)()(Tol)], form monomeric [PhTt(Ar)]Cu(NCCH(3)) in solution and one-dimensional extended structures in the solid state. Each complex type reacted cleanly with acetonitrile, pyridine, or triphenylphosphine generating the corresponding four-coordinate monomer, of which [PhTt(Ph)]Cu(PPh(3)), [PhTt(p)()(Tol)]Cu(PPh(3)), and [Et(2)Bt]Cu(PPh(3))(2) have been structurally characterized.     

Photoelectron imaging of hydrated carbon dioxide cluster anions

The effects of homogeneous and heterogeneous solvation on the electronic structure and photodetachment dynamics of hydrated carbon dioxide cluster anions are investigated using negative-ion photoelectron imaging spectroscopy. The experiments are conducted on mass-selected [(CO(2))(n)()(H(2)O)(m)()](-) cluster anions with n and m ranging up to 12 and 6, respectively, for selected clusters. Homogeneous solvation in (CO(2))(n)()(-) has minimal effect on the photoelectron angular distributions, despite dimer-to-monomer anion core switching. Heterogeneous hydration, on the other hand, is found to have the marked effect of decreasing the photodetachment anisotropy. For example, in the [CO(2)(H(2)O)(m)()](-) cluster anion series, the photoelectron anisotropy parameter falls to essentially zero with as few as 5-6 water molecules. The analysis of the data, supported by theoretical modeling, reveals that in the ground electronic state of the hydrated clusters the excess electron is localized on CO(2), corresponding to a (CO(2))(n)()(-).(H(2)O)(m)() configuration for all cluster anions studied. The diminishing anisotropy in the photoelectron images of hydrated cluster anions is proposed to be attributable to photoinduced charge transfer to solvent, creating transient (CO(2))(n)().(H(2)O)(m)()(-) states that subsequently decay via autodetachment.     

Novel examples of high-dimensional mixed-valence copper cyanide complexes

The first examples of high-dimensional mixed-valence homometallic cyano-bridged copper complexes were synthesized and characterized: net-structured [Cu(CN)(4){Cu(cyclam)}(1.5)](2)(n)()(H(2)O)(5)(n) (1), ladder-type double-chain-structured [Cu(CN)(2){Cu(CN)(2)Cu(cyclam)}](n)()(H(2)O)(n) (2), layer-structured [{Cu(CN)(2)}(2)Cu(cycalm)](n) (3), and hydrogen-bond-based 2-D [Cu(CN)(3)Cu(cyclam)](n)()(CH(3)OH)(n) (4) (cyclam = 1,4,8,11-tetraazacyclotetradecane). (1) Crystallizes in triclinic space group P with a = 8.3589(11) A, b = 13.478(2) A, c = 14.828(2) A, alpha = 66.895(2) degrees , beta = 77.916(3) degrees , gamma = 85.939(3) degrees , and Z = 1; (2) crystallizes in triclinic space group P with a = 8.2305(12) A, b = 9.8861(15) A, c = 13.219(2) A, alpha = 84.863(3) degrees , beta = 75.744(3) degrees , gamma = 89.818(3) degrees , and Z = 2; 3 crystallizes in monoclinic space group P2(1)/c with a = 6.830(2) A, b = 8.482(2) A, c = 17.306(4) A, beta = 98.144(4) degrees , and Z = 2; 4 crystallizes in triclinic space group P with a = 9.470(1) A, b = 10.034(1) A, c = 12.064(1) A, alpha = 67.325(2), beta = 75.593(2), gamma = 70.672(2), and Z = 2. The coordination sphere of Cu(I) sites in the complexes shows diverse structures: tetrahedral [CuC(4)] for (1), tetrahedral [CuC(3)N] and triangular [CuC(2)N] for (2), triangular [CuC(2)N] for (3), and triangular [CuC(3)] for 4. In particular, (1) constitutes the first example of a structurally characterized system containing a bridging tetrahedral [Cu(CN)(4)](3)(-) unit. The diverse structural nature of these complexes is governed by the capping amines and the content of water in the reaction media. The magnetic interactions are negligible in these mixed-valence complexes.     

Syntheses, structures and properties of a series of non-heme alkoxide-Fe(III) complexes of a benzimidazolyl-rich ligand as models for lipoxygenase

The treatment of Fe(ClO(4))(2)·6H(2)O or Fe(ClO(4))(3)·9H(2)O with a benzimidazolyl-rich ligand, N,N,N',N'-tetrakis[(1-methyl-2-benzimidazolyl)methyl]-1,2-ethanediamine (medtb) in alcohol/MeCN gives a mononuclear ferrous complex, [Fe(II)(medtb)](ClO(4))(2)·?CH(3)CN·?CH(3)OH (1), and four non-heme alkoxide-iron(III) complexes, [Fe(III)(OMe)(medtb)](ClO(4))(2)·H(2)O (2, alcohol = MeOH), [Fe(III)(OEt)(Hmedtb)](ClO(4))(3)·CH(3)CN (3, alcohol = EtOH), [Fe(III)(O(n)Pr)(Hmedtb)](ClO(4))(3)·(n)PrOH·2CH(3)CN (4, alcohol = n-PrOH), and [Fe(III)(O(n)Bu)(Hmedtb)](ClO(4))(3)·3CH(3)CN·H(2)O (5, alcohol = n-BuOH), respectively. The alkoxide-iron(III) complexes all show 1) a Fe(III)-OR center (R = Me, 2; Et, 3; (n)Pr, 4; (n)Bu, 5) with the Fe-O bond distances in the range of 1.781-1.816 ?, and 2) a yellow color and an intense electronic transition around 370 nm. The alkoxide-iron(III) complexes can be reduced by organic compounds with a cis,cis-1,4-diene moiety via the hydrogen atom abstraction reaction.     

On the use of mixtures of organotin species for catalytic enantioselective ketone allylation--a detective story

In the presence of enantiopure MTBH(2)(monothiobinaphthol, 2-hydroxy-2[prime or minute]mercapto-1,1[prime or minute]-binaphthyl; 0.2 eq.) quantitative allylation of ArC([double bond]O)Me takes place with impure Sn(CH(2)CH[double bond]CH(2))(4)(prepared from allyl chloride, air-oxidised magnesium and SnCl(4)) to yield tert-homoallylic alcohols in 85-92% ee. In the same process highly purified, or commercial, Sn(CH(2)CH[double bond]CH(2))(4) yields material of only 35-50% ee. The origin of these effects is the presence of small amounts of the compounds, EtSn(CH(2)CH[double bond]CH(2))(3), ClSn(CH(2)CH[double bond]CH(2))(3) ClSnEt(CH(2)CH[double bond]CH(2))(2) in the tetraallyltin sample and the presence of traces of water (which inhibits achiral background reactions). All the triallyl and diallyl species enhance the stereoselectivity in the catalytic allylation reaction, the chlorides more so than the ethyl compound. Hydrolysis of ClSnEt(CH(2)CH[double bond]CH(2))(2) affords crystallographically characterised Sn(4)(mu(3)-O)(mu(2)-Cl)(2)Cl(2)Et(4)(CH(2)CH[double bond]CH(2))(4). Reaction of this latter compound with MTBH(2) leads to the most potent catalyst.     

Organolanthanide-catalyzed intramolecular hydroamination/cyclization/bicyclization of sterically encumbered substrates. Scope, selectivity, and catalyst thermal stability for amine-tethered unactivated 1,2-disubstituted alkenes

This paper reports the organolanthanide-catalyzed intramolecular hydroamination/cyclization of amine-tethered unactivated 1,2-disubstituted alkenes to afford the corresponding mono- and disubstituted pyrrolidines and piperidines using coordinatively unsaturated complexes of the type (eta(5)-Me(5)C(5))(2)LnCH(TMS)(2) (Ln = La, Sm), [Me(2)Si(eta(5)-Me(4)C(5))(2)]SmCH(TMS)(2), and [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) (Ln = Sm, Y, Yb, Lu; E = N, CH) as precatalysts. [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) mediates intramolecular hydroamination/cyclization of sterically demanding amino-olefins to afford disubstituted pyrrolidines in high diastereoselectivity (trans/cis = 16/1) and good to excellent yield. In addition, chiral C(1)-symmetric organolanthanide catalysts of the type [Me(2)Si(OHF)(CpR*)]LnN(TMS)(2) (OHF = eta(5)-octahydrofluorenyl; Cp = eta(5)-C(5)H(3); R* = (-)-menthyl; Ln = Sm, Y), and [Me(2)Si(eta(5)-Me(4)C(5))(CpR*)]SmN(TMS)(2) (Cp = eta(5)-H(3)C(5); R* = (-)-menthyl) mediate asymmetric intramolecular hydroamination/cyclization of amines bearing internal olefins and afford chiral 2-substituted piperidine and pyrrolidine in enantioselectivities as high as 84:16 er at 60 degrees C. The substrate of the structure NH(2)CH(2)CMe(2)CH(2)CH=CH(CH(2))(2)CH=CH(2) is regiospecifically bicyclized by [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) to the corresponding indolizidine skeleton in good yield and high diastereoselectivity. Thermolysis of (eta(5)-Me(5)C(5))(2)LaCH(TMS)(2) in cyclohexane-d(12) at 120 degrees C rapidly releases CH(2)(SiMe(3))(2) and leads to possible formation of fulvene (eta(6)-Me(4)C(5)CH(2)-) species. The thermolysis product readily reverts to active catalysts upon protonolysis by substrate and exhibits the same catalytic activity as the (eta(5),eta(1)-Me(5)C(5))(2)LaCH(TMS)(2) precatalyst at 120 degrees C in the cyclization of cis-2,2-dimethylhept-5-enylamine. Catalytically-active lanthanide-amido complexes (eta(5)-Me(5)C(5))(2)La(NHR)(NH(2)R)(n) and [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]Sm(NHR)(NH(2)R)(n) are shown to be thermally robust species.     

Self-Assembly of Ribbons and Frameworks Containing Large Channels Based upon Methylene-Bridged Dithio-, Diseleno-, and Ditelluroethers

Homoleptic copper(I) and silver(I) complexes [M(n)(L-L)(2)(n)()](BF(4))(n)() (M = Cu or Ag; L-L = MeECH(2)EMe; E = S, Se or Te) have been prepared and characterized by analysis, FAB mass spectrometry, and IR and multinuclear NMR spectroscopy ((1)H, (77)Se, (125)Te, (63)Cu and (109)Ag). The single-crystal X-ray structures of [Cu(n)()(MeSeCH(2)SeMe)(2)(n)()](PF(6))(n)() (orthorhombic, P2(1)2(1)2(1), a = 10.879(7) ?, b = 16.073(7) ?, c = 9.19(1) ?, Z = 4) and [Ag(n)()(MeSeCH(2)SeMe)(2)(n)()](BF(4))(n)() (monoclinic, P2(1)/c, a = 14.546(9) ?, b = 14.65(1) ?, c = 30.203(9) ?, Z = 4) reveal extended three-dimensional cationic frameworks in the solid state which contain large cylindrical or rectangular channels accommodating the PF(6)(-) or BF(4)(-) counterions. In contrast, a single-crystal X-ray structure of [Cu(n)()(MeSCH(2)SMe)(2)(n)()](PF(6))(n)().nMeNO(2) (orthorhombic, Pbcn, a = 15.506(3) ?, b = 8.934(2) ?, c = 25.859(3) ?, Z = 8) shows tetrahedral Cu(I) ions coordinated to bridging dithioethers forming an cationic ribbon-like arrangement of 8-membered rings. Adjacent rings are linked by the Cu atoms. Variable temperature NMR studies have been used to probe various exchange processes occurring in solution in these systems.     

Ordered blue luminescent ultrathin films by the effective coassembly of tris(8-hydroxyquinolate-5-sulfonate)aluminum and polyanions with layered double hydroxides

This article reports a novel method to assemble a small anion with exfoliated Mg-Al-layered double hydroxide (LDH) nanosheets into ordered ultrathin films (UTFs) by employing the layer-by-layer assembly technique. The premixing solution of tris(8-hydroxyquinolate-5-sulfonate)aluminum(III) (AQS(3-)) with three kinds of polyanions-poly(acrylic acid), ((C(3)H(4)O(2))(n), PAA), poly(styrene 4-sulfonate) ([CH(2)CH(C(6)H(4))SO(3)](m), PSS), and poly[5-methoxy-2-(3-sulfopropoxy)-1,4-phenylene vinylene] (C(12)H(13)O(5)S)(n), PPV)-has been used as building blocks to assemble alternatively with LDH nanosheets. The UV-vis absorption and fluorescence spectroscopy of (AQS-polyanion/LDH)(n) UTFs presents stepwise growth upon increasing deposited cycles in comparison with the (AQS/LDH)(n) film under the same experimental process. (AQS-PPV/LDH)(n) UTF displays complex fluorescence originating from AQS and PPV. The (AQS/LDH)(n) and (AQS-polyanion/LDH)(n) UTFs exhibit higher blue-polarized photoemission character with a luminescence anisotropy (r) of ca. 0.12-0.20 and a longer fluorescence lifetime than that of the Na(3)AQS film with r = 0.04. X-ray diffraction, scanning electron microscopy, and atomic force microscopy demonstrated that the UTFs were orderly periodically layered structures with a thickness of ca. 3.0 nm per bilayer. Therefore, this work gives a feasible method for immobilizing small anions into the gallery of LDHs.     

Fabrication of nanotubules and microspheres from the self-assembly of amphiphilic monochain stearic acid derivatives

A series of amphiphilic monochain derivatives of stearic acid, CH(3)(CH(2))(16)CONH(CH(2))(n)NH(2) (n = 2, 3, 4, 6), CH(3)(CH(2))(16)CONH(CH(2))(2)S(2)(CH(2))(2)NH(2), and [CH(3)(CH(2))(16)CONH](2)(CH(2))(2), are synthesized, and their self-assembly behaviors have been investigated in 1,2-dichloroethane (DCE). In addition to the concentration of the compound in DCE, the number of methylene units in hydrophilic segments play a crucial role in determining the final morphology of self-assembling structures from nanotubules with 20 nm inner diameter to microspheres with an average diameter of 20 μm. The external texture of the microsphere is also influenced by the number of methylene units in the hydrophilic segment. The microspheres formed by highly ordered aggregation of nanobelts show high thermal stability. The particular processes and causations have been expatiated.     

Self-assembly of unprecedented [8+12] Cu-metallamacrocycle-based 3D metal-organic frameworks

[8+12]-metallamacrocycle-based 3D frameworks {[Cu(4)(pbt)(2)(SO(4))(2)(DMF)(2)(CH(3)OH)]·7H(2)O·DMF}(n) (1) and [12]-macrocycle 3D {[Cu(2)(pbt)(SO(4))(DMSO)(CH(3)OH)(2)]·5H(2)O·CH(3)OH}(n) (2) have been obtained. Both complexes display antiferromagnetic couplings and high catalytic activity in the oxidative coupling reaction of 1-ethynylbenzene and oxazolidin-2-one.     

Reactions of a platinum(III) dimeric complex with alkynes in water: novel approach to alpha-aminoketone, alpha-iminoketone, and alpha,beta-diimine via ketonyl-Pt(III) dinuclear complexes

Reaction of the platinum(III) dimeric complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(NO(3))(2)](NO(3))(2) (1), prepared in situ by the oxidation of the platinum blue complex [Pt(4)(NH(3))(8)((CH(3))(3)CCONH)(4)](NO(3))(5) (2) with Na(2)S(2)O(8), with terminal alkynes CH[triple bond]CR (R = (CH(2))(n)CH(3) (n = 2-5), (CH(2))(n)CH(2)OH (n = 0-2), CH(2)OCH(3), and Ph), in water gave a series of ketonyl-Pt(III) dinuclear complexes [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)COR)](NO(3))(3) (3, R = (CH(2))(2)CH(3); 4, R = (CH(2))(3)CH(3); 5, R = (CH(2))(4)CH(3); 6, R = (CH(2))(5)CH(3); 7, R = CH(2)OH; 8, R = CH(2)CH(2)OH; 9, R = (CH(2))(2)CH(2)OH; 10, R = CH(2)OCH(3); 11, R = Ph). Internal alkyne 2-butyne reacted with 1 to form the complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(CH(3))COCH(3))](NO(3))(3) (12). These reactions show that Pt(III) reacts with alkynes to give various ketonyl complexes. Coordination of the triple bond to the Pt(III) atom at the axial position, followed by nucleophilic attack of water and hydrogen shift from the enol to keto form, would be the mechanism. The structures of complexes 3.H(2)O, 7.0.5C(3)H(4)O, 9, 10, and 12 have been confirmed by X-ray diffraction analysis. A competitive reaction between equimolar 1-pentyne and 1-pentene toward 1 produced complex 3 and [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)CH(OH)CH(2)CH(2)CH(3))](NO(3))(3) (14) at a molar ratio of 9:1, suggesting that alkyne is more reactive than alkene. The ketonyl-Pt(III) dinuclear complexes are susceptible to nucleophiles, such as amines, and the reactions with secondary and tertiary amines give the corresponding alpha-amino-substituted ketones and the reduced Pt(II) complex quantitatively. In the reactions with primary amines, the once formed alpha-amino-substituted ketones were further converted to the iminoketones and diimines. The nucleophilic attack at the ketonyl group of the Pt(III) complexes provides a convenient means for the preparation of alpha-aminoketones, alpha-iminoketones, and diimines from the corresponding alkynes and amines.     

Chemistry in Molten Alkali Metal Polyselenophosphate Fluxes. Influence of Flux Composition on Dimensionality. Layers and Chains in APbPSe(4), A(4)Pb(PSe(4))(2) (A = Rb, Cs), and K(4)Eu(PSe(4))(2)

The reaction of Pb and Eu with a molten mixture of A(2)Se/P(2)Se(5)/Se produced the quaternary compounds APbPSe(4), A(4)Pb(PSe(4))(2) (A = Rb,Cs), and K(4)Eu(PSe(4))(2). The red crystals of APbPSe(4) are stable in air and water. The orange crystals of A(4)Pb(PSe(4))(2) and K(4)Eu(PSe(4))(2) disintegrate in water and over a long exposure to air. CsPbPSe(4) crystallizes in the orthorhombic space group Pnma (No. 62) with a = 18.607(4) ?, b = 7.096(4) ?, c = 6.612(4) ?, and Z = 4. Rb(4)Pb(PSe(4))(2) crystallizes in the orthorhombic space group Ibam (No. 72) with a = 19.134(9) ?, b = 9.369(3) ?, c = 10.488(3) ?, and Z = 4. The isomorphous K(4)Eu(PSe(4))(2) has a = 19.020(4) ?, b = 9.131(1) ?, c = 10.198(2) ?, and Z = 4. The APbPSe(4) have a layered structure with [PbPSe(4)](n)()(n)()(-) layers separated by A(+) ions. The coordination geometry around Pb is trigonal prismatic. The layers are composed of chains of edge sharing trigonal prisms running along the b-direction. [PSe(4)](3)(-) tetrahedra link these chains along the c-direction by sharing edges and corners with the trigonal prisms. A(4)M(PSe(4))(2) (M = Pb, Eu) has an one-dimensional structure in which [M(PSe(4))(2)](n)()(n)()(-) chains are separated by A(+) ions. The coordination geometry around M is a distorted dodecahedron. Two [PSe(4)](3)(-) ligands bridge two adjacent metal atoms, using three selenium atoms each, forming in this way a chain along the c-direction. The solid state optical absorption spectra of the compounds are reported. All compounds melt congruently in the 597-620 degrees C region.     

Synthesis and reactivity of the hydrido- and alkylrhenium methylidene complexes Cp*(PMe3)2(R)Re=CH2 (R = H, CH3)

Protonolysis of the dimethylrhenium(III) compound Cp(PMe(3))(2)Re(CH(3))(2) (3) led to formation of the highly reactive hydridorhenium methylidene compound [Cp(PMe(3))(2)Re(CH(2))(H)][OTf] (4), which was characterized spectroscopically at low temperature. Although 4 decomposed above -30 degrees C, reactivity studies performed at low temperature indicated it was in equilibrium with the coordinatively unsaturated methylrhenium complex [Cp(PMe(3))(2)Re(CH(3))][OTf] (2). Methylidene complex 4 was found to react with PMe(3) to afford [Cp(PMe(3))(3)Re(CH(3))][OTf] (6) and with chloride anion to give Cp(PMe(3))(2)Re(Me)Cl (7). When BAr(f) anion was added to 4, the thermally stable methylrhenium methylidene complex [Cp(PMe(3))(2)Re(CH(2))(CH(3))][BAr(f)] (8) was isolated upon warming to room temperature. The mechanisms of formation of both 4 and 8 are discussed in detail, including DFT calculations. The novel carbonyl ligated complex Cp(CO)(2)Re(CH(3))OTf (12) was prepared, isolated, and found to not undergo migration reactions to form methylidene complexes.     

Difference rule-a new thermodynamic principle: prediction of standard thermodynamic data for inorganic solvates

We present a quite general thermodynamic "difference" rule, derived from thermochemical first principles, quantifying the difference between the standard thermodynamic properties, P, of a solid n-solvate (or n-hydrate), n-S, containing n molecules of solvate, S (water or other) and the corresponding solid parent (unsolvated) salt: [P[n-solvate] - P[parent]]/n = constant = theta(P)[S,s-s], or n-S and other solvate, n'-S: [P[-solvate] - P[n'-solvate]]/(n - n') = [P[n-S ] - P[n'-S]]/(n - n') = constant = theta(P)[S,s-s] where P may be any one of: U(POT) (the lattice potential energy), V(m) (the molecular or formula unit volume), Delta(f)H degrees , Delta(f)S degrees , Delta(f)G degrees or (the standard thermodynamic functions of formation and the absolute entropy), and n can be noninteger. The constants, theta(P)[S,s-s], for each property, P, of solvate of type S, are established by correlation of the available set of experimental data. We also show that, when solid-state data for a particular solvate is sparse, theta(P)[S,s-s] can be reliably predicted from liquid-state values, P[S,l], or even gas-state values, P[S,g]. This rule offers a powerful means for predicting unknown thermodynamic data, extending the compass of currently known thermodynamic information. Systems considered involve the following solvates: H(2)O (hydrates), D(2)O, NH(3), ND(3), (CH(3))(2)O, NaOH, CH(3)OH, C(2)H(5)OH, (CH(2)OH)(2), H(2)S, SO(2), HF, KOH, and (CH(CH(3))(2))(2)O. Detailed examples of usage are given for hydrates and for SO(2).     

Oxygen Abstraction Reactions of N-Substituted Hydroxamic Acids with Molybdenum(V) and Vanadium(III) and -(IV) Compounds

A wide range of N-substituted mono- and dihydroxamic acids undergo oxygen abstraction on reaction with V(III), V(IV), and Mo(V) compounds to form hydroxamates of V(V) and Mo(VI) respectively together with the corresponding amides and diamides. The molybdenyl and vanadyl hydroxamates form metal-oxygen clusters under FABMS conditions. The X-ray crystal structures of [MoO(2){CH(3)(CH(2))(n)()C(O)N(C(6)H(5))O}(2) (1 and 2) (n = 4, 5) show monomeric structures with structural trans effects and consequent weakening of the Mo-O(ligand) bonds which may account for the tendency to form clusters in FABMS. In constrast, the electrospray MS of the vanadyl dihydroxamates, VO(OH)[PhN(O)C(O)(CH(2))(n)()C(O)N(O)Ph] (n = 3, 5) and VO(OH)[p-CH(3)C(6)H(4)N(O)C(O) (CH(2))(n)()C(O)N(O)C(6)H(4)-CH(3)) (n = 2, 4) show the presence of dimers in solution.     

Syntheses, characterization, and magnetic studies of copper(II) complexes with the ligand N,N,N',N'-tetrakis(2-pyridylmethyl)-1,3-benzenediamine (1,3-tpbd) and its phenol derivative 2,6-bis[bis(2-pyridylmethyl)amino]-p-cresol] (2,6-Htpcd)

The copper(II) complexes [Cu(4)(1,3-tpbd)(2)(H(2)O)(4)(NO(3))(4)](n)(NO(3))(4n)·13nH(2)O (1), [Cu(4)(1,3-tpbd)(2)(AsO(4))(ClO(4))(3)(H(2)O)](ClO(4))(2)·2H(2)O·0.5CH(3)OH (2), [Cu(4)(1,3-tpbd)(2)(PO(4))(ClO(4))(3)(H(2)O)](ClO(4))(2)·2H(2)O·0.5CH(3)OH (3), [Cu(2)(1,3-tpbd){(PhO)(2)PO(2)}(2)](2)(ClO(4))(4) (4), and [Cu(2)(1,3-tpbd){(PhO)PO(3)}(2)(H(2)O)(0.69)(CH(3)CN)(0.31)](2)(BPh(4))(4)·Et(2)O·CH(3)CN (5) [1,3-tpbd = N,N,N',N'-tetrakis(2-pyridylmethyl)-1,3-benzenediamine, BPh(4)(-) = tetraphenylborate] were prepared and structurally characterized. Analyses of the magnetic data of 2, 3, 4, and [Cu(2)(2,6-tpcd)(H(2)O)Cl](ClO(4))(2) (6) [2,6-tpcd = 2,6-bis[bis(2-pyridylmethyl)amino]-p-cresolate] show the occurrence of weak antiferromagnetic interactions between the copper(II) ions, the bis-terdentate 1,3-tpbd/2,6-tpcd, μ(4)-XO(4) (X = As and P) μ(1,2)-OPO and μ-O(phenolate) appearing as poor mediators of exchange interactions in this series of compounds. Simple orbital symmetry considerations based on the structural knowledge account for the small magnitude of the magnetic couplings found in these copper(II) compounds.     

Pentanuclear homoleptic M(5)L(6) (M = Mn(II), Co(II), Zn(II)) complexes formed by strict self-assembly

A series of trigonal bipyramidal pentanuclear complexes involving the alkoxo-diazine ligands poap and p3oap, containing the M(5)[mu-O](6) core is described, which form by a strict self-assembly process. [Co(5)(poap-H)(6)](ClO(4))(4).3H(2)O (1), [Mn(5)(poap-H)(6)](ClO(4))(4).3.5CH(3)OH.H(2)O (2), [Mn(5)(p3oap-H)(6)](ClO(4))(4).CH(3)CH(2)OH.3H(2)O (3), and [Zn(5)(poap-H)(6)](ClO(4))(4).2.5H(2)O (4) are homoleptic pentanuclear complexes, where there is an exact match between the coordination requirements of the five metal ions in the cluster, and the available coordination pockets in the polytopic ligand. [Zn(4)(poap)(poap-H)(3)(H(2)O)(4)] (NO(3))(5).1.5H(2)O (5) is a square [2 x 2] grid with a Zn(4)[mu-O](4) core, and appears to result from the presence of NO(3), which is thought to be a competing ligand in the self-assembly. X-ray structures are reported for 1, 4, and 5. 1 crystallized in the monoclinic system, space group P2(1)/n with a = 13.385(1) A, b = 25.797(2) A, c = 28.513(3) A, beta = 98.704(2) degrees, and Z = 4. 4 crystallized in the triclinic system, space group P1 with a = 13.0897(9) A, b = 18.889(1) A, c = 20.506(2) A, alpha = 87.116(1) degrees, beta = 74.280(2) degrees, gamma = 75.809(2) degrees, and Z = 2. 5 crystallized in the monoclinic system, space group P2(1)/n with a = 14.8222(7) A, b = 21.408(1) A, c = 21.6197(9) A, beta = 90.698(1) degrees, and Z = 4. Compounds 1-3 exhibit intramolecular antiferromagnetic coupling.     

Mechanism of protonation of [Pt(3)(mu-PBu(t)(2))3(H)(CO)2], yielding the hydride-bridged [Pt(3)(mu-PBu(t)(2))2(mu-H)(PBu(t)(2)H)(CO)2]OTf (Tf=CF(3)SO(2)), and the spectroscopic and theoretical characterization of a kinetic intermediate

The reaction of the Pt(I)Pt(I)Pt(II) triangulo cluster Pt(3)(micro-PBu(t)()(2))(3)(H)(CO)(2) (1) with TfOH (Tf = CF(3)SO(2)) affords the hydride-bridged cationic derivative [Pt(3)(mu-PBu(t)()(2))(2)(mu-H)(PBu(t)()(2)H)(CO)(2)]OTf (2). With TfOD the reaction gives selectively [Pt(3)(mu-PBu(t)(2))(2)(mu-D)(PBu(t)(2)H)(CO)(2)]OTf (2-D(1)), implying that the proton is transferred to a metal center while a P-H bond is formed by the reductive coupling of one of the bridging phosphides and the terminal hydride ligand of the reagent. The reaction proceeds through the formation of a thermally unstable kinetic intermediate which was characterized at low temperatures, and was suggested to be the CO-hydrogen-bonded (or protonated) [Pt(3)(mu-PBu(t)(2))(3)(H)(CO)(2)].HOTf (3). An ab initio theoretical study predicts a hydrogen-bonded complex or a proton-transfer tight ion pair as a possible candidate for the structure of the kinetic intermediate.