含中氮茚基团的偶氮染料的合成及其吸收光谱

通过简单的方法合成了4个新的中氮茚偶氮类化合物,并通过元素分析、红外光谱及核磁共振谱表征了其结构。测定了它们的热稳定性,研究了它们在不同溶剂中以及不同pH条件下的紫外光谱性质。我们发现当化合物中的羧基以羧酸负离子存在时最大吸收波长蓝移。     

Synthesis and Application of Some Alkali‐Clearable Azo Disperse Dyes Based on Naphthalimide Derivatives

A series of naphthalimide‐based alkali‐clearable azo disperse dyes containing a fluorosulfonyl group was synthesized. 4‐Fluorosulfonylaniline, 4‐fluorosulfonyl‐2‐nitroaniline and 6‐chloro‐4‐fluorosulfonyl‐2‐nitroaniline as the diazo components were prepared from N‐acetylsulfanilyl chloride and were subsequently coupled with 4‐hydroxy‐N‐3‐methoxypropyl‐1, 8‐naphthalimide. The synthesized dyes and their intermediates were characterized by the use of DSC, FTIR, ¹H NMR, ¹³C NMR, Mass spectroscopy and UV‐visible spectroscopic techniques. Spectrophotometric investigations of prepared dyes in different solvents were carried out in order to obtain their absorption maxima, molar extinction coefficients and solvatochromic effects. The obtained dyes were applied to polyester fabric by the HT method and exhibited good leveling, wash and sublimation fastnesses and moderate light fastness. The synthesized dyes showed that incorporated fluorosulfonyl group to these dyes can be converted to the dyes containing a water soluble sulfonate group in the relatively mild alkaline conditions.     

Safe and Facile Access to Nonstabilized Diazoalkanes Using Continuous Flow Technology

Despite the high synthetic potential of nonstabilized diazo compounds, their utilization has always been hampered by stability, toxicity, and safety issues. The present method opens up access to the most reactive nonstabilized diazoalkanes. Among diazo compounds, nonstabilized alkyl diazo compounds are the least represented because of their propensity to degrade during preparation. The continuous flow oxidation process of hydrazones on a silver oxide column afforded an output stream of base‐ and metal‐free pure diazo solution in dichloromethane. Starting from innocuous ketones and aldehydes, this methodology allows the production of a broad range of unprecedented diazoalkanes compounds in excellent yields, while highlighting their synthetic potential and the possibility of safe large‐scale diazo production.     

Synthesis and solvatochromism study of some new 4-(benzyloxy)-2-((4-aryl)diazenyl)phenols

A series of novel azo disperse dyes were synthesized by coupling reaction of 4-benzyloxyphenol with diazotized p-substituted aniline derivatives as diazo components.These compounds were characterized by spectroscopic techniques and elemental analysis. Ionization constants,pK_a,for these dyes were determined using electronic spectroscopic method.     

Facile synthesis of mesoporous magnesium oxide–graphene oxide composite for efficient and highly selective adsorption of hazardous anionic dyes

Mesoporous magnesium oxide–graphene oxide composite (MGC) has been synthesized using a facile post-immobilization method by mixing pre-synthesized magnesium oxide (MgO) with graphene oxide (GO). MgO used for fabrication of the composite has been synthesized using an environment-friendly method involving gelatin as a template. XRD, Raman and EDX analyses have confirmed the presence of MgO and GO in the composite. FTIR and SEM analyses of synthesized MGC have further elucidated the surface functionalities and morphology, respectively. Using N₂ adsorption–desorption isotherm, BET surface area of MGC has been calculated to be 55.9 m² g^?1 and BJH analysis confirmed the mesoporous nature of MGC. The application of synthesized MGC as a selective adsorbent for various toxic anionic dyes has been explored. Batch adsorption studies have been carried out to investigate the influence of different adsorption parameters on the adsorption of two anionic dyes: indigo carmine (IC) and orange G (OG). The maximum adsorption capacities exhibited by MGC for IC and OG are 252.4 and 24.5 mg g^?1, respectively. Plausible mechanism of dye adsorption has been explained in detail using FTIR analysis. In a mixture of cationic and anionic dyes, MGC selectively adsorbs anionic dyes with high separation factors, while in binary mixtures of anionic dyes, both dyes are adsorbed efficiently. Thus, MGC has been shown to be a potential adsorbent for the selective removal of anionic dyes from wastewater.

     

掺杂对PbTiO3光催化活性的影响

掺杂对ＰｂＴｉＯ_３光催化活性的影响傅希贤，单志兴，肖坤林，曾淑兰（天津大学化学系天津３０００７２）关键词ＰｂＴｉＯ_３，掺杂，光催化活性，光降解利用半导体材料光催化降解水中污染物是近年发展起来的重要课题之一［１］，一般多采用半导体氧化物为光催化剂，文...     

Biomimetic Polymers Responsive to a Biological Signaling Molecule: Nitric Oxide Triggered Reversible Self‐assembly of Single Macromolecular Chains into Nanoparticles

Novel nitric oxide (NO) responsive monomers (NAPMA and APUEMA) containing o‐phenylenediamine functional groups have been polymerized to form NO‐responsive macromolecular chains as truly biomimetic polymers. Upon exposure to NO—a ubiquitous cellular signaling molecule—the NAPMA‐ and APUEMA‐labeled thermoresponsive copolymers exhibited substantial changes in solubility, clearly characterized by tuneable LCST behavior, thereby inducing self‐assembly into nanoparticulate structures. Moreover, the NO‐triggered self‐assembly process in combination with environmentally sensitive fluorescence dyes could be employed to detect and image endogenous NO.     

An Anticoagulant Activity System Using Nanoengineered Autofluorescent Heparin Nanotubes

Heparin (HEP) and periodate‐oxidized heparin (O‐HEP) nanotubes were prepared by combining the template method with a layer‐by‐layer (LbL) technique. The tubular structure was obtained and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and confocal laser scanning microscopy (CLSM). O‐HEP is one of the HEP derivatives that contains anticoagulant activity and preserves its ability for other effects. Chitosan (CHI) and O‐HEP have been used to fabricate nanotubes by covalent cross‐linking Schiff base reactions. It is demonstrated that the obtained nanotubes have the significant feature of autofluorescence without the addition of any fluorescent dyes and they retain their anticoagulation activity. Compared with O‐HEP/CHI nanotubes, HEP/CHI nanotubes show high anticoagulation activity and do not have autofluorescence. Furthermore, this method could be extended to other copolysaccharide derivatives for the preparation of autofluorescent nanomaterials.     

Polymer brushes grafted from graphene via bioinspired polydopamine chemistry and activators regenerated by electron transfer atom transfer radical polymerization

Polymer brushes decorated reduced GO (rGO) with advanced applications have been prepared by bioinspired polydopamine (PDA) chemistry integrated with activators regenerated by electron transfer atom transfer radical polymerization (ARGET‐ATRP) technique. First, rGO/PDA was obtained by the process for graphene oxide (GO) coated with a homogeneous bio‐adhesive PDA layer. Then the initiator 2‐bromoisobutyryl bromide (BIBB) was immobilized on the surface of PDA functionalized rGO. Finally, rGO/PDA‐Br was polymerized with N, N‐diethylaminoethyl methacrylate (DEAEMA) and glycidyl methacrylate (GMA) to obtain rGO/PDA‐g‐polymer brushes by ARGET‐ATRP process. The prepared rGO/PDA‐g‐PGMA brush would be subjected to further functionalization with ethylenediamine (EDA), which would impart the obtained products (rGO/PDA‐g‐PGMA‐NH₂) with good adsorption ability toward cationic dyes. The chemical structures and morphologies of the functionalized GO products have been characterized in detail by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, thermal gravimetric analysis (TGA), scanning electron microscope (SEM), transmission electron microscope(TEM), and atomic force microscopy (AFM). The distinctive pH‐responsive character of rGO/PDA‐g‐PDEAEMA and adsorption ability of rGO/PDA‐g‐PGMA‐NH₂ for cationic dyes have been explored by UV–vis spectrophotometer. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 689–698     

Synthesis and spectral characterization of azo dyes derived from calix[4]arene and their application in dyeing of fibers

In this study, the synthesis and characterization of two new upper rim functionalized azocalix[4]arene dyes have been obtained by coupling calix[4]arene with different diazo compounds of 3,5-dicarboxyaniline and 4-aminobenzene sulphon amide. The characterization of these dyes has been carried out by elemental analysis, FT-IR and ¹H NMR spectra. The effect of varying dielectric constants of solvents on the absorption spectra of azocalix[4]arenes (1, 2, 3, 4) and commercial Isolan Gelb SGL (T) have been examined by UV–Vis spectrophotometer. These azocalix[4]arene dyes have also been used for dyeing textile fibers like cotton, wool, acetate, polyester and polyamide fibers. Their dyeing and fastness properties have also been discussed.     

Synthesis of some novel bis(hetaryl)azo disperse dyes and investigation of their absorption spectra

3‐Amino‐2‐cyano‐4,6‐disubstituted‐thieno{2,3‐b}pyridines and 3‐aminopyridine were diazotized and coupled with 2‐phenylindole, 2‐methylindole, and 1‐methyl‐2‐phenylindole, respectively. These dyes were characterized by UV‐Visible, FT‐IR, ¹H NMR, and mass spectroscopic techniques. Solvent effects on the visible absorption spectra of the dyes were evaluated. The color of the dyes is discussed with respect to the nature of the heterocyclic ring and substituent present therein. In addition, effects of temperature, concentration, as well as acid and base on the visible absorption maxima of the dyes are reported. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:622–630, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20361     

Morphological and structural characteristics of diazo dyes at the air-water interface: in situ Brewster angle microscopy and polarized UV/vis analysis

A morphological analysis is presented for Langmuir films of the diazo dyes Sudan 4 (S4), Sudan 3 (S3), and Sudan red (SR), using Brewster angle microscopy. Stable nonmonomolecular structures are formed at the air-water interface denoted as a plateau in the pressure-area isotherms. Monolayer domains are evident by the contrastless image even before the pressure onset, which grow in size until it reached a condensed monolayer. This behavior resembles that of Langmuir films from simple aromatic fatty acids. Films from all the azo dyes display similar features, according to the surface potential isotherms and in situ polarized UV/vis spectroscopy except for the larger area per molecule occupied by S4 and SR. This is attributed to the presence of CH(3) groups that cause steric hindrance modifying the organization of diazo dye molecules at the air-water interface. UV/vis polarized absorption spectroscopy showed preferential orientation of S4 and S3 on the water surface, while SR molecules lie isotropically. For these three diazo dyes, film absorption was negligible at very large areas per molecule, becoming nonzero only at a critical area coinciding with the onset of surface potential. The critical area is ascribed to the formation of a H-bonded network between water molecules and diazo dye headgroups.     

Graphene and graphene oxide as effective adsorbents toward anionic and cationic dyes

In the present study, exfoliated graphene oxide (EGO) and reduced graphene oxide (rGO) have been used for the adsorption of various charged dyes such as methylene blue, methyl violet, rhodamine B, and orange G from aqueous solutions. EGO consists of single layer of graphite decorated with oxygen containing functional groups such as carboxyl, epoxy, ketone, and hydroxyl groups in its basal and edge planes. Consequently, the large negative charge density available in aqueous solutions helps in the effective adsorption of cationic dyes on EGO while the adsorption is negligible for anionic dyes. On the other hand, rGO that has high surface area does not possess as high a negative charge and is found to be very good adsorbent for anionic dyes. The adsorption process is followed using UV-Visible spectroscopy, while the material before and after adsorption has been characterized using physicochemical and spectroscopic techniques. Various isotherms have been used to fit the data, and kinetic parameters were evaluated. Raman and FT-IR spectroscopic data yield information on the interactions of dyes with the adsorbent.     

Synthesis,Characterization of Novel Bisheteroaryl Bisazo Dyes,and Their Dyeing and Solvatochromic Behavior

4‐Phenyl‐2‐aminothaizole was diazotized and coupled with N‐(alkyl)‐2‐oxo‐3‐cyano‐4‐methyl‐6‐hydroxypyridine (2‐pyridone). The resultant dyes were named as N‐(alkyl)‐6‐hydroxy‐4‐methyl‐2‐oxo‐5‐((4‐phenylthiazole‐2‐yl)diazenyl)‐1,2‐dihydro pyridine‐3‐carbonitrite and duly characterized. The diazotized aryl amines were then coupled to a moiety of above‐mentioned dyes at 5‐position of thiazole. The obtained bisheteroaryl azo dyes were characterized by elemental analysis and spectral studies. Solvent effects on the visible absorption spectra of the dyes were evaluated. The color of the dyes is discussed with respect to the nature of the heterocyclic ring, aromatic amines, and substituents present therein. All these dyes were applied as disperse dyes on to polyester fabrics, and their fastness properties were evaluated. © 2013 Wiley Periodicals, Inc. Heteroatom Chem 24:208–220, 2013; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21085     

Dipolar Compounds Containing Fluorene and a Heteroaromatic Ring as the Conjugating Bridge for High‐Performance Dye‐Sensitized Solar Cells

A novel series of dipolar organic dyes containing diarylamine as the electron donor, 2‐cyanoacrylic acid as the electron acceptor, and fluorene and a heteroaromatic ring as the conjugating bridge have been developed and characterized. These metal‐free dyes exhibited very high molar extinction coefficients in the electronic absorption spectra and have been successfully fabricated as efficient nanocrystalline TiO₂ dye‐sensitized solar cells (DSSCs). The solar‐energy‐to‐electricity conversion efficiencies of DSSCs ranged from 4.92 to 6.88 %, which reached 68–96 % of a standard device of N719 fabricated and measured under the same conditions. With a TiO₂ film thickness of 6 μm, DSSCs based on these dyes had photocurrents surpassing that of the N719‐based device. DFT computation results on these dyes also provide detailed structural information in connection with their high cell performance.     

Continuous Flow Synthesis and Purification of Aryldiazomethanes through Hydrazone Fragmentation

Electron‐rich diazo compounds, such as aryldiazomethanes, are powerful reagents for the synthesis of complex structures, but the risks associated with their toxicity and instability often limit their use. Flow chemistry techniques make these issues avoidable, as the hazardous intermediate can be used as it is produced, avoiding accumulation and handling. Unfortunately, the produced stream is often contaminated with other reagents and by‐products, making it incompatible with many applications, especially in catalysis. Herein is reported a metal‐free continuous flow method for the production of aryldiazomethane solutions in a non‐coordinating solvent from easily prepared, bench‐stable sulfonylhydrazones. All by‐products are removed by an in‐line aqueous wash, leaving a clean, base‐free diazo stream. Three successful sensitive metal‐catalyzed transformations demonstrated the value of the method.     

Synthesis and characterization of guest-host azo dyes with broad absorption bands

Three groups of dyes were synthesized and characterized in order to examine their solubility, absorption spectrum, and order parameter in liquid crystal hosts. Our synthesis method allowed the formation of the diazonium salts and the diazo coupling in ethyl acetate instead of an aqueous medium, permitting the formation of long and neutral azo dyes. In the liquid crystal BDH-E7, they showed order parameters in the range of 0.52 to 0.76. The two dyes with the longest molecular lengths were particularly interesting due to their very broad absorption spectra in the visible region. Each of these two compounds behave as single component black dye guest/host systems, which generally require a mixture of two or three dyes in the liquid crystal host. These dyes were also evaluated for use in polymer dispersed liquid crystal films.     

Fine Tuning the Performance of DSSCs by Variation of the π‐Spacers in Organic Dyes that Contain a 2,7‐Diaminofluorene Donor

Organic dyes that contain a 2,7‐diaminofluorene‐based donor, a cyanoacrylic‐acid acceptor, and various aromatic conjugation segments, which are composed of benzene, fluorene, carbazole, and thiophene units, as a π‐bridge have been synthesized and characterized by optical, electrochemical, and theoretical investigations. The trends in the absorption and electrochemical properties of these dyes are in accordance with the electron‐donating ability of the conjugating segment. Consequently, the dyes that contained a 2,7‐carbazole unit in the π‐spacer exhibited red‐shifted absorption and lower oxidation potentials than their corresponding fluorene‐ and phenylene‐bridged dyes. However, the enhanced power‐conversion efficiency that was exhibited by the fluorene‐bridged dyes in the DSSCs was attributed to their broader and intense absorption. Despite the longer‐wavelength absorption and reasonable optical density, carbazole‐bridged dyes exhibited lower power‐conversion efficiencies, which were ascribed to the poor alignment of the LUMO level in these dyes, thereby leading to the inhibition of electron injection into the TiO₂ conduction band.     

Synthesis and characterization of guest-host azo dyes with broad absorption bands

Abstract

Three groups of dyes were synthesized and characterized in order to examine their solubility, absorption spectrum, and order parameter in liquid crystal hosts. Our synthesis method allowed the formation of the diazonium salts and the diazo coupling in ethyl acetate instead of an aqueous medium, permitting the formation of long and neutral azo dyes. In the liquid crystal BDH-E7, they showed order parameters in the range of 0.52 to 0.76. The two dyes with the longest molecular lengths were particularly interesting due to their very broad absorption spectra in the visible region. Each of these two compounds behave as single component black dye guest/host systems, which generally require a mixture of two or three dyes in the liquid crystal host. These dyes were also evaluated for use in polymer dispersed liquid crystal films.     

A New Reactivity Mode for the Diazo Group: Diastereoselective 1,3‐Aminoalkylation Reaction of β‐Amino‐α‐Diazoesters To Give Triazolines

A novel mode of reactivity for the diazo group, the 1,3‐addition of a nucleophile and an electrophile to the diazo group, has been realized in the intramolecular aminoalkylation of β‐amino‐α‐diazoesters to form tetrasubstituted 1,2,3‐triazolines. The reaction exhibited a broad scope, good functional group tolerance, and excellent diastereoselectivity. In addition, a new Au‐catalyzed intramolecular transannulation reaction of the obtained propargyl triazolines to give pyrroles has been discovered.