Carbonate-Selective Electrodes Based on Higher Quaternary Ammonium Salts with Increased Steric Accessibility of the Exchange Site

A film polyvinyl chloride (33 wt %) carbonate-selective electrode based on a higher quaternary ammonium salt with increased steric accessibility of the exchange site, 3,4,5-tris(dodecyloxy)benzyl( oxyethyl)₃trimethylammonium chloride (5 wt %), was developed using o-nitrophenyl decyl ether (52 wt %) as a plasticizer and heptyl p-trifluoroacetylbenzoate (10 wt %) as a solvating agent. The limit of detection of hydrocarbonate was 1.9 × 10^?9 M, lifetime was 2.5 months, and the slope of the electrode function was 32.3 ± 0.6 mV/decade. The electrode is selective in the presence of interfering SO₄^2-, Cl^?, C₂O₄^2-, Br^?, HPO₄^2-, and NO₃^- ions, which allows its application for the determination of HCO₃^- ions in mineral water.     

Potentiometric study of the kinetics and equilibria of formation of chloroglycinate palladium(II) complexes from bis-glycinato palladium(II) complexes

The equilibria and kinetics of the reaction of Pd(gly)₂ complexes with hydrogen ions and chloride ions has been studied by a potentiometric method. The underlying idea of the method is the measurement of solution pH as a function of reaction time t using a glass electrode. The solutions used had the following initial compositions: xM Pd(gly)₂, xM Hgly, and 1 M NaCl with x = 1 × 10^?4, 5 × 10^?4, and 1 × 10^?3; initial pH₀ was from ～3.5 to ～4.4. The experimentally determined pH versus t dependences and the rate equation for a pseudo-second-order reaction were used to determine the equilibrium constant of formation of Pd(gly)(Hgly)Cl complexes from Pd(gly)₂ complexes and the observed rate constant for this reaction, k _obs. The dependence of k _obs on the pH of the acid solutions studied was assigned to a change in the sequence of the reactions of addition of a hydrogen ion and a chloride ion to the complex Pd(gly)₂.     

Fabrication and characterisation of a mixed oxide-covered mesh electrode composed of NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> and its capability of generating hydroxyl radicals during the oxygen evolution reaction in electrolyte-free water

A mixed oxide-covered mesh electrode composed of NiCo₂O₄ (MOME-NiCo₂O₄) was prepared on a stainless-steel substrate using thermal decomposition (slow-cooling rate method). Surface, bulk and electrochemical properties of MOME were studied using different techniques, namely scanning electron microscopy (SEM), X-ray diffraction (XRD), cyclic voltammetry (CV) with determination of the electrochemical porosity (?) and morphology factor (φ) parameters, quasi-stationary polarisation curves (PC) and electrochemical impedance spectroscopy (EIS). SEM images revealed a good coverage of the metallic wires by a compact oxide layer (absence of cracks). XRD analysis confirmed the formation of the spinel NiCo₂O₄ with the presence of NiO. The ‘in situ’ surface parameters denoted as ? and φ exhibited values of 0.39 and 0.33, respectively, revealing that the electrochemically active surface area is mainly confined to the ‘outer/external’ surface regions of the oxide layer. The PC was characterised by two Tafel slopes distributed in the low (b ₁ = 46 mV dec^?1) and high (b ₂ = 59 mV dec^?1) overpotential domains. The corresponding apparent exchange current densities were j ₀₍₁₎ = (3.43 ± 0.11) × 10^?6 A cm^?2 and j ₀₍₂₎ = (6.70 ± 0.08) × 10^?6 A cm^?2, respectively. The EIS study accomplished in the low-overpotential domain revealed a Tafel slope (b ₁) of 51 mV dec^?1. According to the spin-trapping reaction using N,N-dimethyl-p-nitrosoaniline (RNO), the MOME-NiCo₂O₄ electrode exhibited good performance for the generation of weakly adsorbed hydroxyl radicals (HO^?) during the OER in electrolyte-free water.     

Effect of the activation of a graphite-epoxy composite electrode and the buffer capacity of a solution on the reversibility of the hydroquinone electrode reaction

Peak potentials and the kinetics of hydroquinone oxidation at an electrode from a graphite-epoxy composite in activated and passivated states were studied in supporting electrolytes of different buffer capacities and pH varying from 0.1 to 8.8, using methods of direct-current and cyclic voltammetry. The electrode was activated before its polarization by mechanically cutting a 0.2–4-μm surface layer directly in a test solution. The electrode was passivated by storing in air for two or more days. The behavior of hydroquinone in its oxidation at the passivated and activated electrodes was compared using diagnostic criteria for the following functions: I _a?v ^1/2, logI _a?logv, I _a/v ^1/2?v ^1/2, and I _a/c, where v is the rate of the potential sweep and c is the volumetric concentration of hydroquinone. The potential difference of anodic and cathodic peaks in cyclic voltammograms indicated the reversibility of the electrode reaction in all supporting electrolytes.     

Synthesis,crystal structure,and kinetics of thermal decomposition of the Zn(II) complex with vanillin

A complex [Zn(C₈H₇O₃)₂(H₂O)₂] (C₈H₈O₃ is vanillin) has been synthesized and characterized by IR, elemental analysis, and X-ray diffraction single-crystal analysis. The crystals are monoclinic, space group C2/c, a = 22.236(8) Å, b = 10.594(2) Å, c = 7.8190(16) Å, α = 89.90(3)°, β = 106.87(4)°, γ = 89.99(3)°, V = 1762.6(8) ų, Z = 4, F(000) = 832, S = 1.079, ρ _c = 1.521g cm^?3, R = 0.0221, R _w = 0.0604, μ = 1.433 mm^?1. The Zn²⁺ ion is six-coordinated with a distorted octahedron geometry. The complex forms a three-dimensional network through intermolecular hydrogen bonds. The thermal decomposition kinetics of the complex for the second stage was studied under non-isothermal conditions by the TG and DTG methods. The kinetic equation can be expressed as dα/dt = Ae^?E/RT 2(1 ? α)[1 ? ln(1 ? α)]^1/2. The kinetic parameters (E, A), activation entropy ΔS ^≠, and activation free-energy ΔG ^≠ were also gained.     

Counterion effects on the isotopic properties of the Cl<Superscript>−</Superscript> and Li<Superscript>+</Superscript> ions in aqueous solutions

The reduced partition function ratios between isotopic forms (β-factors) were calculated by the ab initio RHF/6-311++G**(3df, 3p) and MP2/6-311++G**(3df, 3p) quantum-chemical methods for hydrated chloride ion and ion pair hydrates NaCl·nH₂O and LiOH · nH₂O. The influence of the Na⁺ cation on the β-factor value and the chlorine isotope separation factor in the precipitation of NaCl from concentrated aqueous solutions was found to be substantial. At the same time, the presence of OH^? counterions had no noticeable effect on the β-factor of the hydrated Li⁺ cation.     

Structure of cyano-bridged Eu(III)—Co(III) bimetallic assembly and its application to photophysical verification of photomagnetic phenomenon

New crystal structure of Eu(DMF)₄(H₂O)₃Co(CN)₆·H₂O (DMF = N,N′-dimethylformamide) (Eu-Co) has been determined to be monoclinic, P2(1)/n, a = 19.796(12) Å, b = 8.862(11) Å, c = 17.525(10) Å, β = 96.26(5)°, V = 3056(5) ų, Z = 4. The Eu(III) ion adopts an antiprismatic eight-coordination and forms a cyano bridge with r(Eu-N) = 2.496(7) Å and Θ(Eu-N-C) = 165.7(7)° to the Co(III) ion. The complex exhibits some common features with the Eu-Fe complex. Diffuse reflectance electronic spectra and magnetic susceptibility of Eu-Cr, Eu-Mn, Eu-Fe, and Eu-Co complexes were compared. By substituting the metal ions, both electronic and structural features affected the charge transfer bands and superexchange interactions concerning cyanide ligands. In addition, only Eu-Co exhibited ⁵ D ₀ → ⁷ F ₂ and ⁵ D ₀ → ⁷ F ₁ luminescence bands at 16300 cm^?1 and 16900 cm^?1, respectively at 298 K (λ_ex = 360 nm (27000 cm^?1)), because quenching by cyano-bridged ions did not prevent Eu(III) ion from exhibiting emission. Thus, only Eu-Co may be suitable for verification of an assumption of mechanism concerning drastic photoinduced magnetic changes for Nd-Fe. Merely small decrease of magnetization was observed for Eu-Co after UV light irradiation at 2.0 K. This result was attributed to slight structural changes around cyano bridges without transitions of spin states.     

Chlorokomplexe von Ti(III), V(III) und Cr(III) in Propandiol-1,2-carbonat und Trimethylphosphat

Addition of chloride ions to the hexasolvated ions of Ti(III), V(III) and Cr(III) in propandiol-1,2-carbonate (PDC) and trimethylphosphate (TMP) may lead to the following complexes: [TiCl]²⁺ (inPDC), [TiCl₂]⁺ (inTMP), TiCl₃ (inPDC andTMP, low solubility inTMP), [TiCl₄]^? (inPDC andTMP?), [TiCl₆]^3? (inPDC); [VCl]²⁺ (inPDC andTMP), VCl₃ (inPDC andTMP, low solubility inTMP), [VCl₄]^? (inPDC); [CrCl]²⁺ (inTMP), [CrCl₂]⁺ (inPDC), CrCl₃ (inPDC andTMP), [CrCl₄]^? (inPDC).     

Synthesis and crystal structure of dibenzo-18-crown-6 oxonium perchlorate

An ionized crystalline adduct of dibenzo-18-crown-6, perchloric acid, and water (H₃O)[DB 18K6](ClO₄) is synthesized and structurally studied by X-ray diffraction. The crystals are triclinic: a = 8.582 Å, b = 10.486 Å, c = 26.293 Å, α = 79.45°, β = 82.00°, γ = 79.36°, Z = 4, space group P \(\bar 1\). The structure is solved by a direct method and refined by the full-matrix least-squares method in the anisotropic approximation to R = 0.098 for 5936 independent reflections (CAD4 automated diffractometer, λMoK _α radiation). The structure contains two independent DB18C6 molecules, two independent H₃O⁺ ions, and two independent ClO ₄ ^? ions. The H₃O⁺ ions each lie in the cavity of each of the two DB18C6 molecules and are retained there by three strong hydrogen bonds. Two DB18C6 molecules have close geometric parameters and a butterfly conformation with approximate symmetry C _2v . One of the two independent ClO ₄ ^? anions is disordered over two orientations.     

One-step preparation of sulfonated carbon and subsequent preparation of hybrid material with polyaniline salt: a promising supercapacitor electrode material

The present trend to increase the energy density of electrochemical supercapacitor is to hybrid the electrochemical double layer capacitance electrode materials of carbon with loading or encapsulation of transition metal oxide or conductive polymeric pseudocapacitor materials as the binary or ternary hybrid electrochemical active materials. In this work, we selected polyaniline salt-sulfonated carbon hybrid (PANI-SA?C _SA ) as a cheaper electrode material for supercapacitor electrode. Sulfonated carbon (C _SA ) was prepared from hydrothermal carbonization of furaldehyde and p-toluenesulfonic acid. Polyaniline-sulfate salt containing sulfonated carbon was prepared by chemical oxidative polymerization of aniline using ammonium persulfate in presence of sulfuric acid and sulfonated carbon via aqueous, emulsion and interfacial polymerization pathways. Formation of hybrid material was confirmed from scanning electron microscopy. Among the hybrid prepared with three different polymerization pathways, hybrid prepared by aqueous polymerization pathway showed better electrochemical performance. The specific capacitance of the hybrid prepared via aqueous polymerization was 600 F g^?1, which is higher than that of the pristine PANI-SA (350 F g^?1) and C _SA (30 F g^?1). Hybrid material was subjected for 8000 charge-discharge cycles and at 8000 cycles; it showed 88% retention of its original specific capacitance value of 485 F g^?1 with coulombic efficiency (97–100%). These results showed that C _SA micro spheres prevent the degradation of PANI-SA chains during charge/discharge cycles. Specific capacitance, cycle life, low solution resistance, low charge transfer resistance and high phase angle value of PANI-SA?C _SA supercapacitor cell indicates a higher performance supercapacitor system.

Open image in new window

Graphical abstract Synthesis of hybrid of sulfonated carbon with polyaniline sulfate salt and its supercapacitor performance Ravi Bolagam, Palaniappan Srinivasan,^* Rajender Boddula

     

Kinetics of Na|CF<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> and Li|CF<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> systems

Properties of CF _x /Li and CF _x /Na cells were examined while using galvanostatic charging/discharging, electrochemical impedance spectroscopy and scanning electron microscopy (SEM). The capacity during the first cycle was as high as ca. 1000 mAh g^?1. Such an electrode is suitable for primary CF _x /Li and CF _x /Na batteries. SEM images of CF _x cathode showed that during discharging it was transformed into amorphous carbon and LiF or NaF crystals (of diameter of ca. 5–20 μm). These systems (C?+?LiF or C?+?NaF) cannot be reversibly converted back into CF _x /Li or CF _x /Na, respectively. Exchange current densities are between 10^?7 Acm^?2 and 10^?9 Acm^?2 when working with LiPF₆ and NaPF₆ electrolytes (1.12?×?10^?7 Acm^?2 and 6.82?×?10^?9 Acm^?2, respectively). Those values are low and indicate that the charge transfer process may be the rate-determining step. Activation energies for the charge transfer process were 57 and 72 kJ mol^?1 for CF _x /LiPF₆ and CF _x /NaPF₆ systems, respectively. Higher activation energy barrier for the CF/Na⁺?+?e^??→?C?+?NaF reaction results in lower observed exchange current density in comparison to the system with lithium ions.     

[H<Subscript>2</Subscript>OT][PdCl<Subscript>4</Subscript>], a salt of the protonated oxythiamine cation with the tetrachloropalladate(II) tetrachloride anion synthesis and crystal structure

The interaction of oxythiamine chloride hydrochloride with a solution of palladium chloride in hydrochloric acid affords a salt of protonated oxythiamine [H₂OT][PdCl₄] (I) (HOT is 4-methyl-3-[(2′-methyl-4′-oxo-3′,4′-dihydropyrimidinyl-5′)methyl]-5-(2-hydroxyethyl)thiazolium, C₁₂H₁₆N₃O₂S⁺). The crystal structure of salt I is determined by X-ray diffraction analysis. The crystals are monoclinic: a = 9.474(3) Å, b = 13.822(2) Å, c = 13.626(4) Å, β = 93.42(2)°, V = 1781.2(3) ų, Z = 4, space group P2₁/n. The structural units of salt I are doubly-charged cations [H₂OT]²⁺ and anions [PdCl₄]^2? joined by hydrogen bonds and electrostatic interaction into dimeric supermolecules. The thiazolium and pyrimidine rings in the cation are planar (the dihedral angle between the planes is 89.6°) and oriented relative to the linking methylene center to form torsion angles Φ _t = 64.9° and Φ _p = 49.9° characteristic of the V′ conformation.     

Calculation of the thermodynamic characteristics of ions in vapor over sodium fluoride

The geometric parameters, normal vibration frequencies, and thermochemical characteristics of the ions present in vapor over sodium fluoride, Na₂F⁺, Na₃F ₂ ⁺ , NaF ₂ ^? , and Na₂F ₃ ^? , were calculated ab initio by the Hartree-Fock method and taking into account electron correlation. The main equilibrium configuration of all ions was found to be the linear configuration of D _∞h symmetry. Pentaatomic ions could also exist as two isomers, planar cyclic of C _2v symmetry and bipyramidal of D _3h symmetry. Their energies were higher than that of the D _∞h isomers, and their contents in vapor were negligibly low. The energies and enthalpies of dissociation of the ions with the elimination of the NaF molecule were calculated. The enthalpies of formation of the ions were obtained.     

Synthesis and crystal structure of the complex [Sm(<Emphasis Type="Italic">p</Emphasis>-MOBA)<Subscript>3</Subscript>bipy]<Subscript>2</Subscript> · 2C<Subscript>2</Subscript>H<Subscript>5</Subscript>OH

A new binuclear complex [Sm(p-MOBA)₃bipy]₂ · 2C₂H₅OH (p-MOBA = p-methoxybenzoate, bipy = 2,2′-bipyridine) has been prepared via dissolution reaction in an ethanol/water mixed solution and characterized by elemental analysis, IR, UV, XRD and molar conductance, respectively. Its single crystal was characterized by X-ray single crystal diffraction. The crystal belongs to triclinic system, space group P \(\bar 1\). The crystallographic data are: a = 10.970(3) Å, b = 11.507(4) Å, c = 13.931(4) Å, α = 84.449(4)°, β = 76.403(4)°, γ = 87.284(4)°, Z = 1, D _r = 1.574 Mg/m³, FW = 1612.02, F(000) = 814, R ₁ = 0.0275, wR ₂ = 0.0646. Two Sm³⁺ ions are linked by four carboxylic groups with bidentate bridging and tridentate chelating-bridging coordination modes. Each center Sm³⁺ is nine coordinated with a distorted tri-capped triangular prism geometry.     

The assignment of signals in the EPR spectra of axially symmetrical quintet dinitrenes

Fine structure levels in an external magnetic field and angular dependences of resonance magnetic fields on the direction of an external magnetic field were calculated for two axially symmetrical quintet dinitrenes with the zero-field splitting parameters D _q = 0.260 cm^?1, E _q = 0.000 and D _q = 0.243 cm^?1, E _q = 0.003 cm^?1. The EPR spectra of such dinitrenes contained lines of only three xy transitions (xy ₁, xy ₂, and xy ₄), two Δm _s = ±2 transition lines between the W _?2 and W ₀ sublevels, and three additional lines from noncanonically oriented molecules whose magnetic axis Z made an angle of 12°–16° or 52°–54° with an external magnetic field.     

Crystal structure and antitumor activities of a dinuclear cobalt(II) complex based on <Emphasis Type="Italic">meso</Emphasis>-1,2,3,4-tetra(1H-benzo[<Emphasis Type="Italic">d</Emphasis>]imidazol-2-yl)butane

The [Co₂(tbb)Cl₄]?4DMF complex, where tbb is meso-1,2,3,4-tetra(1H-benzo[d]imidazol-2-yl)butane, is synthesized and characterized by single crystal X-ray diffraction. For the complex: C₄₄H₅₄Co₂C_l4N₁₂O₄, M_r = 1074.65, monoclinic crystal system, space group P21/n, a = 9.2350(13) Å, b = 11.3566(15) Å, c = 23.879(3) Å, β = 90.547(2)°, V = 2504.3(6) ų, Z = 2, D_c = 1.425 g/cm³, λ = 0.71073 Å, μ(MoK_α) = = 0.929 mm^–1, F(000) = 1112, S = 1.047, R = 0.0765, and wR = 0.2110 for 13668 observed reflections with I > 2σ(I). It is a neutral dinuclear complex. One meso-1,2,3,4-tetra(1H-benzo[d]imidazol-2-yl)butane coordinates two cobalt(II) ions. Each cobalt(II) ion is formed by two tbb nitrogen atoms and two chloride ions. The antiproliferative activities of the complex are screened by MTT assay against Eca109 cancer cells. The complex exhibits inhibition on the growth of Eca109 cancer cells with IC₅₀ of 22.1±6.7 μM after 48 h treatment. The cobalt complex has potential application in treatment of Eca109 cancer. CCDC 1015791.     

Chemiluminescence Determination of Cyanide Ions

It was found that alkaline solutions of luminol exhibit chemiluminescence in the presence of p-nitrobenzaldehyde (p-NBA), hemin, and cyanide ions. Air oxygen dissolved in the solutions is an essential component of the process. The kinetics of luminol chemiluminescence in the presence of p-NBA, hemin, and cyanide ions indicates the catalytic nature of the process. A scheme was proposed for the series of reactions resulting in chemiluminescence and generated by superoxide radicals formed in the p-NBA-catalyzed reaction between hemin-activated air oxygen and hydrated p-NBA species. A procedure was developed with a determination limit of (1.0 ± 0.3) × 10^?7 mg/mL (n = 5, P = 0.95) for cyanide ions.     

The effect of chemisorbed sulfide ions on the gold electrodeposition from acidic thiocarbamide electrolytes

Introducing sodium sulfide (about 10^?5 M) into acidic thiocarbamide solutions reduces the gold reduction overpotential. The reaction rate passes through a maximum at a potential of 0.1 V. The overpotential depends on the sulfide ion concentration and the time of electrode exposure to solution prior to the beginning of scanning. Transients of potential measured on a renewable gold electrode in thiocarbamide electrolytes containing catalytically active species served as the basis for calculations of the coefficient of trapping of sulfide ions by the growing gold deposit. The kinetics of gold electrodeposition at fixed surface coverages with adsorbed sulfide ions θ is studied. It is shown that at θ = const, the dependence of the reaction rate on the overpotential is described by the Tafel equation. It is shown that with an increase in θ, the effective values of exchange current and transfer coefficient increase from i ₀ ≌ 10^?5 A/cm² and α ≌ 0.25 in pure solutions to α ≌ 0.5 and i ₀ ≌ 10^?4 A/cm² at θ ≥ 0.3 and then remains virtually unchanged. The reaction order decreases in the absolute magnitude, remaining negative. Thus for θ ≌ 0, p _k = ?logi/?logc = ?1, whereas for θ ≥ 0.3, p _k = ?0.3. A possible explanation is proposed for the catalytic effect of the sulfide ion adsorption on the mechanism of the gold reduction from acidic thiocarbamide electrolytes.     

Synthesis,crystal structure,and fluorescence properties of a two-dimensional copper(II) complex with Schiff base

A new Schiff base ligand C₁₉H₁₃NO₅(H₂L) was synthesized using 2-aminoterephthalic acid and 2-hydroxy-1-naphthaldehyde. A complex of this ligand [Cu(C₁₉H₁₁NO₅)(C₂H₆O)] _n was synthesized and characterized by IR, UV, fluorescence spectroscopy and X-ray diffraction single-crystal analysis. The crystal crystallizes in the monoclinic system, space group Pbca with a = 8.7745(18), b = 18.613(4), c = 24.644(5) Å, V = 4024.9(14) ų, Z = 8, F(000) = 1816, S = 1.009, ρ _calcd = 1.462 g cm^?3, μ = 1.122 mm^?1, the final R = 0.0477 and wR = 0.1594 for 4609 observed reflections (I > 2σ(I)). The Cu(II) is five-coordinated by one N atom and two O atoms from the Schiff base ligand and two carboxylate O atoms from another two ligands to form a distorted square-pyramidal geometry. Each ligand serves as a bridging ligand to link Cu²⁺ ions, leading to a two-dimensional coordination polymer. The fluorescence properties of the ligand and complex were also studied. The ligand shows strong fluorescence, and the fluorescence intensity is weakened after the Cu(II) complex formed.     

Tri-<Emphasis Type="Italic">p</Emphasis>-Tolylbismuth Diperchlorate and μ-Oxo-bis[(perchlorato)tri-<Emphasis Type="Italic">p</Emphasis>-tolylbismuth]: Synthesis and Structure

Tri-p-tolylbismuth perchlorate (1) and μ-oxo-bis[(perchlorato)tri-p-tolylbismuth] (2) have been synthesized by the reaction between tri-p-tolylbismuth dibromide and silver perchlorate and its hydrate. The complexes have been studied by chemical analysis, IR spectroscopy, and X-ray diffraction. Complex 1 is triclinic, space group Pī, Z = 4, a =10.7271(9) Å, b = 13.5585(11) Å, c = 18.1592(13) Å, α = 110.867(3)°, β = 94.944(3)°, γ = 96.888(3)°, V = 2426.3(3) Å3, ρ_calcd = 1.865 g/cm3; complex 2 crystallizes in trigonal symmetry, space group R\(\bar 3\), a = 13.1157(2) Å, c = 22.1959(2) Å, γ = 120°, V = 3306.64(8) ų, ρ_calcd = 1.777 g/cm³. The bismuth atoms in the molecular structure of complex 1 have a distorted trigonal bipyramidal coordination to the apically arranged oxygen atoms of perchlorate ions (Bi–C, 2.180(5)–2.201(5) Å; Bi–O, 2.324(4)–2.355(4) Å; OBiO axial angles, 170.1(1)°, 174.5(1)°). The structure of complex 2 contains binuclear [p-Tol₃Bi(ClO₄)]₂O molecules (Bi–O, 2.371(15), 1.9107(7) Å; OBiO axial angle, 180.0°).