Polymeric surfactants in latex technology: polystyrene–poly(ethylene oxide) block copolymers as stabilizers in emulsion polymerization

Polystyrene–poly(ethylene oxide) PS–PEO di- and triblock copolymers have been used as stabilizers in the emulsion polymerization of styrene and styrene–butylacrylate for the preparation of “hairy latexes”. The polymerization kinetics and the efficiency of these polymeric surfactants were correlated with the molecular characteristics of the block copolymer. It was shown that the efficiency decreased with increasing molecular weight and PS content of the block copolymer. The PEO frige, with a thickness of 4–25 nm, on the latex particle surface could be characterized and it was shown by differential scanning calorimetry (DSC) that water is strucured in that PEO layer. Film formation with “hairy latexes” was also examined both by DSC and thermomechanical analysis. The properties and application possibilities, such as in controlled latex flocculation, have been reviewed.     

Synthesis of amphiphilic polyelectrolyte block copolymers using “living” radical polymerization. Application as stabilizers in emulsion polymerization

This paper describes the synthesis of amphiphilic block copolymers composed of an ionic poly(styrenesulfonate) first segment and a hydrophobic polystyrene second one, using TEMPO-mediated “living” radical polymerization. These copolymers proved to be efficient stabilizers in the emulsion polymerization of styrene.     

Synthesis and solution properties of well‐defined comb‐on‐comb graft polymers

Well‐defined comb‐on‐comb copolymers of styrene, isoprene, and α‐methyl‐styrene are prepared through cascade “grafting‐onto” methods. The polymer main chain is prepared by nitroxide‐mediated radical polymerization while the branches are prepared by anionic polymerization. The “grafting‐onto” approach employs the coupling chemistry of macromolecular anions, such as polystyryllithium, polyisoprenyllithium, or poly(α‐methylstyryl)lithium, toward either benzyl chloride or epoxy ring on precursor backbones. Thus a series of ABA‐, ABB‐, and ABC‐type comb‐on‐comb copolymers are prepared and characterized by gel permeation chromatography equipped with a multi‐angle laser light scattering detector and a viscometer. Unusual “U‐shaped” dependences of radius of gyration, R_g, on molecular weight are observed for comb‐on‐comb products, which are attributable to delayed elution of the densely grafted copolymers from GPC columns. The result also shows that the comb‐on‐comb copolymers exhibit morphologies from hard sphere to cylindrical rod, depending on the length ratio of the main chain to the branches. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5518–5527, 2008     

Poly(ethylene oxide)–poly(ethylene imine) block copolymers as templates and catalysts for the in situ formation of monodisperse silica nanospheres

Block copolymers based on poly(ethylene oxide) (PEO) and poly(ethylene imine) (PEI) are efficient catalysts/templates for the formation of uniform silica nanoparticles. Addition of tetraethylorthosilicate to a solution of PEO–PEI or PEI–PEO–PEI block copolymers results in the formation of silica particles with a diameter of ca. 30 nm and narrow size distribution. The particles precipitated with the diblock copolymers can be redispersed in water after isolation as individual nanoparticles. Evidently, block copolymers based on PEO and PEI serve as excellent templates for the biomimetic and “soft” synthesis of silica nanoparticles.

Synthesis of Star‐Shaped Poly(ϵ‐caprolactone)‐b‐Poly(styrene) Block Copolymer by Combining Ring‐Opening Polymerization and Atom Transfer Radical Polymerization

Newly designed star‐shaped block copolymers made of poly(?‐caprolactone) (PCL) and polystyrene (PS) were synthesized by combining ring‐opening polymerization (ROP) of ?‐caprolactone (CL) and atom transfer radical polymerization (ATRP) of styrene (St). The switch from the first to the second mechanism was obtained by selective transformation of “living” radical sites. First, tri‐ and tetrafunctional initiators were used as an initiator for the “living” ring opening polymerization (ROP) of ?‐caprolactone producing a hydroxyl terminated three or four arm star‐shaped polymer. Next, the OH end groups of PCL star branches were derivatized into 2‐bromoisobutyrate groups which gave rise to the corresponding tri‐ and tetrabromoester ended‐PCL stars; the latter served as macroinitiators for the ATRP of styrene at 110°C in the presence of CuBr/2,2‐bipyridine (Bipy) catalyst system affording star‐shaped block copolymers PCL_n‐b‐PS_n (n=3 or 4). The samples obtained were characterizated by ¹H‐NMR spectroscopy and GPC (gel permeation chromatograph). These copolymers exhibited the expected structure. The crystallization of star‐shaped block copolymers was studied by DSC (differential scanning calorimetry). The results show that when the content of the PS block increased, the T_m of the star‐shaped block copolymer decreased.     

Grafting of polymers onto and/or from silica surface during the polymerization of vinyl monomers in the presence of γ‐ray‐irradiated silica

The effects of radicals on silica surface, which were formed by γ‐ray irradiation, on the polymerization of vinyl monomers were investigated. It was found that the polymerization of styrene was remarkably retarded in the presence of γ‐ray‐irradiated silica above 60 °C, at which thermal polymerization of styrene is readily initiated. During the polymerization, a part of polystyrene formed was grafted onto the silica surface but percentage of grafting was very small. On the other hand, no retardation of the polymerization of styrene was observed in the presence of γ‐ray‐irradiated silica below 50 °C; the polymerization tends to accelerate and polystyrene was grafted onto the silica surface. Poly(vinyl acetate) and poly(methyl methacrylate) (MMA) were also grafted onto the surface during the polymerization in the presence of γ‐ray‐irradiated silica. The grafting of polymers onto the silica surface was confirmed by thermal decomposition GC‐MS. It was considered that at lower temperature, the grafting based on the propagation of polystyrene from surface radical (“grafting from” mechanism) preferentially proceeded. On the contrary, at higher temperature, the coupling reaction of propagating polymer radicals with surface radicals (“grafting onto” mechanism) proceeded to give relatively higher molecular weight polymer‐grafted silica. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2972–2979, 2006     

Polysalt formation with poly(carboxylic acid)s

Polysalts have been prepared from poly(acrylic acid), poly(itaconic acid) and two alternating copolymers of maleic anhydride with propene and α-methyl styrene, acting as the polyanions, and several polycations. The stoichiometry and water retention values of the polysalts have been determined and compared with those prepared using carboxymethyl cellulose (CMC). It was observed that “nonstoichiometric” polysalts were formed if the “theoretical” carboxyl content was used to calculate the composition. Stoichiometric polysalts were obtained with CMC. The results are discussed in terms of the acid strength and distribution of the anionic groups in the polymers; it is concluded that both factors can influence the composition of the polysalts formed.     

Surface properties of styrene–ethylene oxide block copolymers

Hydrophobic–hydrophilic block copolymers were prepared by “living” anionic polymerization. They consist of polystyrene and poly(ethylene oxide) blocks, and are soluble in water. Their interfacial properties were investigated, employing aqueous solutions. The block copolymers lowered the surface tension of water in analogy with the low molecular weight surfactants such as sodium lauryl sulfate and heptaethylene oxide n-dodecyl ether. Their aqueous solutions exhibited solubilization properties differing from those of polyethylene glycol. Therefore, it is thought that the polystyrene blocks produce solubilization phenomena. In samples of the same styrene content, the precipitation temperature of a high molecular weight copolymer in water was lower than that of a low molecular weight copolymer at the same concentration in the same solvent. The surface tension and precipitation temperature of aqueous solutions seem to be influenced by molecular weight and composition.     

The α-halogeno ether function: formation and use in the design of tailor-made polymers

α-Halogeno ether species, in appropriate conditions, can induce the “living” cationic polymerization of vinyl ethers. They can also be used as initiators for the “living” polymerization of styrene derivatives. Therefore, their use as intermediates in the preparation of tailor-made polymers and copolymers offers interesting opportunities in macromolecular synthesis. The main parameters which determine and control their reactivity are reviewed and discussed. The possibility to generate quantitatively these derivatives by various routes and from different organic functions such as aldehyde, ketone, acetal and hydroxyl is examined. Some of these routes have been used to generate the α-halogeno ether function directly at the end of acetal and hydroxy-terminated polymers. The latter have then been used as macroinitiators to prepare new block copolymers. The synthesis of poly(isobutyl vinyl ether-β-ethyl vinyl ether), poly(styrene-β-chloroethyl vinyl ether) and poly(chloroethyl vinyl ether-β-butadiene-β-chloroethyl vinyl ether) by this technique is described.     

Synthesis and characterization of ABA‐type amphiphilic tri‐block copolymers through anionic polymerization using end functionalized poly(ethylene oxide) oligomers

ABA‐type amphiphilic tri‐block copolymers were successfully synthesized from poly(ethylene oxide) derivatives through anionic polymerization. When poly(styrene) anions were reacted with telechelic bromine‐terminated poly(ethylene oxide) ( 1 ) in 2:1 mole ratio, poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers were formed. Similarly, stable telechelic carbanion‐terminated poly(ethylene oxide), prepared from 1,1‐diphenylethylene‐terminated poly (ethylene oxide) ( 2 ) and sec‐BuLi, was also used to polymerize styrene and methyl methacrylate separately, as a result, poly (styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) and poly (methyl methacrylate)‐b‐poly(ethylene oxide)‐b‐poly(methyl methacrylate) tri‐block copolymers were formed respectively. All these tri‐block copolymers and poly(ethylene oxide) derivatives, 1 and 2 , were characterized by spectroscopic, calorimetric, and chromatographic techniques. Theoretical molecular weights of the tri‐block copolymers were found to be similar to the experimental molecular weights, and narrow polydispersity index was observed for all the tri‐block copolymers. Differential scanning calorimetric studies confirmed the presence of glass transition temperatures of poly(ethylene oxide), poly(styrene), and poly(methyl methacrylate) blocks in the tri‐block copolymers. Poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers, prepared from polystyryl anion and 1 , were successfully used to prepare micelles, and according to the transmission electron microscopy and dynamic light scattering results, the micelles were spherical in shape with mean average diameter of 106 ± 5 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Well‐defined polyoxazoline‐based alkoxyamines as efficient macroinitiators in nitroxide‐mediated radical polymerization of styrene

The synthesis of two well‐defined 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐nitroxide‐terminated poly(2‐methyl‐2‐oxazoline) with narrow dispersity (M_w/M_n = 1.1) has been achieved for the first time. The insertion of the alkoxyamine end groups at one or both ends of poly(2‐methyl‐2‐oxazoline) (PMEOX) chains has been successfully done using a method based on “terminating reagent method.” These macroinitiators have molecular weights ranging from 6.3 × 10³ to 9.4 × 10³ g mol^?1. In contrast, attempt to introduce the alkoxyamine group at one end of PMEOX chain through the “initiator method” has furnished a mixture of alkoxyamine‐graft polyoxazolines because of rearrangement of alkoxyamine occurring during the synthesis of PMEOX. The macroinitiators obtained by terminating reagent method have been used successfully for polymerization of styrene by nitroxide‐mediated radical polymerization (NMP), which exhibited all the expected features of a controlled system. The control of NMP has been proved by a good agreement between theoretical and experimental molecular weights and by narrow dispersity (M_w/M_n < 1.2). Different types of well‐defined multiblock copolymers have been prepared: diblock copolymers poly[(2‐methyl‐2‐oxazoline)‐b‐(styrene)] (PMEOX‐b‐PS) and, for the first time, triblock copolymers poly[(styrene)‐b‐(2‐methyl‐2‐oxazoline)‐b‐(styrene)] (PS‐b‐PMEOX‐b‐PS). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Molecular design of multicomponent polymer systems. VII. Emulsifying effect of poly(ethylene–b–styrene) copolymer in high-density polyethylene/polystyrene blends

Poly(butadiene–b–styrene) copolymers containing a pure, 1,4-PB block have been synthesized by a “living” coordination process. The complete hydrogenation of the PB chain leads accordingly to a high-density polyethylene (HDPE) block. The emulsifying efficiency of such a copolymer (H-7) in HDPE/PS blends is compared with that of a previously reported poly(ethylene–butene–b–styrene) copolymer (SE-7) obtained by the PB hydrogenation of an anionically prepared PB–b–PS. Microscopy examinations demonstrate unambiguously the interfacial activity of both copolymers in HDPE/PS blends. The tensile mechanical properties of the blends are significantly but also differently modified by the two emulsifiers. The copolymer H-7 gives rise to the highest strengths, but, contrary to the copolymer SE-7, provides a poor ductility to the blends. This different behavior is assumed to result in part from the different characteristics of the hydrogenated PB blocks. The elastomeric HPB chain of SE-7 should form at the interface a more or less extended soft zone whereas a rigid interface would result from the cocrystallization of the HPB chain of H-7 with the HDPE homopolymer.     

Synthesis of densely grafted comblike copolymers

Densely grafted copolymers were synthesized using the “grafting from” approach via the combination of reversible addition‐fragment chain transfer polymerization (RAFT) and atom transfer radical polymerization (ATRP). First, a novel functional monomer, 2,3‐di(2‐bromoisobutyryloxy)ethyl acrylate (DBPPA), with two initiating groups for ATRP was synthesized. It was then polymerized via RAFT polymerization to give macroinitiators for ATRP with controlled molecular weights and narrow molecular weight distributions. Last, ATRP of styrene was carried out using poly(DBPPA)s as macroinitiators to prepare comblike poly(DBPPA)‐graft‐polystyrenes carrying double branches in each repeating unit of backbone via “grafting from” approach. Furthermore, poly(DBPPA)‐graft‐[polystyrene‐block‐poly(t‐BA)]s and their hydrolyzed products poly(DBPPA)‐graft‐[polystyrene‐block‐poly(acrylic acid)]s were also successfully prepared. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 362–372, 2008     

Studies on the Cure Reaction and Relationship between Network Structure/Thermal Properties of Styrene Copolymers Based on Adypic/Sebacic Acid Modified Unsaturated (Epoxy) Polyesters

The studies on the relationship between network structure/thermal properties of styrene copolymers based on adypic/sebacic acid modified unsaturated (epoxy) polyesters cured using different hardeners as well as the course of the cure reaction of polyesters with styrene have been presented. The adypic/sebacic acid modified unsaturated polyesters (UP) prepared from 4-cyclohexene-1,2-dicarboxylic anhydride (THPA), maleic anhydride (MA), adypic acid (AA) or sebacic acid (SA) and ethylene glycol (EG) and their epoxy derivatives: adypic/sebacic acid modified unsaturated epoxy polyesters (UEP) were subjected to the cure process with styrene using diacyl peroxide: benzoyl peroxide (BPO) or the mixture of BPO/suitable acid anhydride: 4-cyclohexene-1,2-dicarboxylic anhydride (THPA) or glutaric anhydride (GA). Thermal properties were evaluated by means of DSC, TG and DMA analyses. It was proved that studied properties were significantly depended on polyester's structure and the type of applied curing system. Generally, higher values of E'_20°C, tgδ_max, E”, ν_e, IDT, T_k for styrene copolymers based on UEP were obtained. It was connected with more cross-linked polymer network structure due to the possible copolymerization reaction of carbon-carbon double bonds of polyester with styrene and additional polyaddition of epoxy to anhydride groups or thermal curing of epoxy groups. The additional connections between polyester's chains led to obtain more stiff and thermal stable polymeric materials. Moreover, the increase of saturated aliphatic acid's chain length in polyester backbone caused the decrease of E'_20°C, tgδ_max, E”, ν_e, IDT, T_k values of styrene copolymers. It suggested that copolymers based on polyesters prepared from acid containing more methylene groups in their structure were characterized by more flexible polymer network due to the “laxity” effect of aliphatic chains.     

Synthesis of novel polymeric materials based on aliphatic polyesters by combination of different controlled polymerization methods

Combination of the living ring-opening polymerization (ROP) of ε-CL and lactides with the “controlled” free radical polymerization of styrene and methacrylic monomers is a versatile strategy for the synthesis of well-defined block and graft copolymers. In this respect, the dual “living” polymerization strategy in which two different functional groups on a single molecule used to initiate the two controlled mechanisms is particularly efficient. Combination of ROP and step-growth polymerization is another versatile methodology for the preparation of a large variety of new materials, e.g. polyimide nanofoams, polyester/silica hybrid materials and star and branched polyesters by dendritic initiation.     

A-B-A Triblock and (A-B)n Segmented Block Copolymers of Styrene and Ethylene Oxide via Thermal Iniferters

A free radical technique is described for the synthesis of tri- and multiblock copolymers of styrene and ethylene oxide through polyethylene oxide-based thermal “iniferters.” The mono- or dihydroxy-terminated oligomeric polyethylene oxides were chemically transformed to the secondary amine terminated species. Thiocarba-mylation and oxidation of the amine groups gave rise to macro- or polymeric thiuram disulfides called macro- or polymeric “iniferters,” respectively. Thermal polymerization of styrene in the presence of the macro iniferter led to the formation of their perfect triblock copolymers, with styrene forming the central block. Utilization of the polymeric iniferter, on the other hand, give rise to (A-B)_n type segmented copolymers containing as many as 3 (A-B) sequences. The length of each block could be regulated by the choice of the appropriate iniferter and its relative concentration with respect to the monomer. The iniferters and the block copolymers were characterized.     

Synthesis and characterization of star graft copolymers with asymmetric mixed “V‐shaped” side chains via “click” chemistry on a hyperbranched polyglycerol core

The star graft copolymers composed of hyperbranched polyglycerol (HPG) as core and well defined asymmetric mixed “V‐shaped” identical polystyrene (PS) and poly(tert‐butyl acrylate) as side chains were synthesized via the “click” chemistry. The V‐shaped side chain bearing a “clickable” alkyne group at the conjunction point of two blocks was first prepared through the combination of anionic polymerization of styrene (St) and atom transfer radical polymerization of tert‐butyl acrylate (tBA) monomer, and then “click” chemistry was conducted between the alkyne groups on the side chains and azide groups on HPG core. The obtained star graft copolymers and intermediates were characterized by gel permeation chromatography (GPC), GPC equipped with a multiangle laser‐light scattering detector (GPC‐MALLS), nuclear magnetic resonance spectroscopy and fourier transform infrared. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1308–1316, 2009     

Visible light-induced synthesis of polysulfone-based graft copolymers by a grafting from approach

The synthesis of polysulfone (PSU) graft copolymers by a two-step “grafting from” approach is described. First, a chlorofunctional PSU (PSU-Cl) is formed via chloromethylation of a commercial PSU. The formed polymers are used macroinitiator for the dimanganese decacarbonyl assisted free-radical polymerization of tert-butyl acrylate, methyl methacrylate, and styrene to give the desired graft copolymers. Moreover, amphiphilic graft copolymers are also formed via posthydrolyzation of poly(tert-butyl acrylate) containing graft copolymers. The intermediates at various stages and the ultimate graft copolymers are characterized by various analysis techniques. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 412–416     

Polymeric catechol derivatives. IV. Polymerization behavior of 4-vinylcatechols and some properties of their polymeric derivatives

The polymerization and copolymerization of 4-vinylcatechols, such as 2-(0-methyl)-4-vinylcatechol (I), 3,4-dimethoxystyrene (II), and 3,4-methylenedioxystyrene (III), were investigated in cyclohexanone at 30°C, using tri-n-butylborane as an initiator. The reactions yielded vinyl polymers and copolymers. The copolymerization parameters of I–III were determined; their Q and e values were found to be similar to those of styrene and vinylhydroquinone. The copolymerization of I–III gave copolymers of a highly alternating character. The thermal stability of the polymers and copolymers so obtained was also studied. The redox potentials of hydroloyzed poly(I) were examined; the reverse “polymer effect” was observed.     

Towards a microchip-based chromatographic platform. Part 2: sol-gel phases modified with polyelectrolyte multilayers for capillary electrochromatography.

The potential for using polyelectrolyte multilayers (PEMs) to provide chromatographic functionality on continuous silica networks created from sol-gel chemistry has been evaluated by capillary electrochromatography (CEC). Construction of the PEM was achieved by flushing the column with polyelectrolytes of alternative charge, with variation of the properties of the exposed polyelectrolyte providing a unique means to vary the chromatographic surface. Variation of the exposed polyelectrolyte from poly(diallyldimethylammonium chloride) (PDDAC) to dextran sulfate (DS) allowed the direction of the electroosmotic flow (EOF) to be changed and also provided a means to vary the chromatographic capacity. Variation of negative polymer from DS to poly(styrene sulfonate) (PSS) significantly altered the EOF and the migration of peptides, with both the reversed-phase and ion-exchange capacities increasing. An alternative method for changing the column capacity was to change the thickness of the PEM, which was evaluated by anion-exchange CEC. A 70-80% increase in retention was observed for all anions without any increase in EOF suggesting significant penetration of the analytes through the PEM and interaction with buried charges within the PEM.