Determination of thermal effusivity of solids by a photoacoustic scanning technique

A new method is proposed to determine the thermal effusivity of solid samples using a one dimensional photoacoustic scanning technique. The method employs a sample configuration in which the backing for a good light absorber layer is changed from a reference sample to the unknown sample by scanning the absorber surface with an incident modulated light beam. From the measured phase difference or amplitude ratio one can determine the thermal effusivity of the unknown sample, knowing the effusivity of the reference sample. The Rosencwaig-Gersho theory of photoacoustic effect has been extended to the present experimental situation and expressions have been derived for photoacousitc phase difference and amplitude ratio as the backing is changed. Values calculated using these expressions are found to agree well with measured values for different sample combinations except in amplitude ratio values when the thermal effusivities of the samples differ very widely. The reason for this disagreement is discussed.     

Rotational viscosity enhancement in nematic liquid crystal near a charged surface

The effective rotational viscosity coefficient and flow alignment angle are investigated for polar liquid crystals (LCs), such as 4-n-octyloxy- 4^′-cyanobiphenyl (8OCB), in the vicinity of a charged bounding surface. is calculated using the Ericksen-Leslie theory, both for stationary and nonstationary regimes. Calculations of , both for homeotropic and planar alignment of 8OCB molecules, at a charged indium tin oxide(ITO)-coated glass plate show an additional contribution to up to 7.8%. The nonequilibrium flow alignment angle (τ) is also calculated for the surface region bounded by 0.1≤y≤3.0 μm. Transition from a tumbling situation to a flow aligning regime can occur near the charged boundary surface. Received 22 November 2001 and Received in final form 31 January 2002     

Flexoelastic properties of polar liquid crystals

Structural properties of liquid crystals, such as the order parameters and the orientational, radial, and direct correlation distribution functions of polar liquid crystals 4-n-heptyloxy-4′-n-cyanobiphenyl (7OCB) and 4-n-hexyloxy-benzylidene-4′-n-aminobenzonitrile (HBAB) have been calculated using a combination of numerical simulation and statistical mechanics methods. It has been shown that the calculated values of both the Frank elastic coefficients K _i (i = 1, 2, 3) corresponding to the splay, twist, and bend deformations and the flexoelectric coefficients e _i (i = 1, 3) agree with the experimental data for 7OCB. The calculated values of the same coefficients for HBAB have been published for the first time.     

Photothermal techniques applied to the study of thermal properties in biodegradable films

The objective of the present work was to determine the thermal diffusivity and effusivity of biodegradable films by using photothermal techniques. The thermal diffusivity was studied by using the open photoacoustic cell technique. On the other hand the thermal effusivity was obtained by the photopyroelectric technique in a front detection configuration. The films were elaborated from mixtures of low density polyethylene (LDPE) and corn starch. The results showed that at high moisture values, the thermal diffusivity increased as the starch concentration was higher in the film. However at low moisture conditions (<9%) the thermal diffusivity diminished when the starch content in the sample was increased. On the other hand the thermal effusivity has a behavior in opposition to the thermal diffusivity. The thermal effusivity increased with the increase of the starch content in the film, at low extrusion moisture conditions (6.55%). As the moisture and starch concentration in the films were increased, the thermal effusivity diminished.     

Resonance photoacoustic spectroscopy and gas analysis of gaseous flow at reduced pressure

The results of theoretical and experimental studies of sensitivity of a resonant photoacoustic Helmholtz resonator detector for gas flowing through a photoacoustic cell under reduced pressure are presented. The measurements of the sensitivity and ultimate sensitivity of the differential photoacoustic cell were performed with a near-IR room-temperature diode laser using the well-known H₂O absorption line (12496.1056 cm^-1) as a reference. The measured value of the sensitivity (6–17 Pa W m^-1) is in satisfactory agreement with the calculated one, which equals 6–35 Pa W m^-1. The obtained value of the ultimate sensitivity ((3–5)×10^-7 W m^-1 Hz^-1/2) provides measurements of the concentration of molecules at the ppb–ppm level. Received: 19 April 2001 / Revised version: 18 September 2001 / Published online: 7 November 2001     

Photoacoustic measurements of the thermal properties of AlyGa1-yAs alloys in the region 0<y<0.5

y Ga_1-yAs alloys grown by liquid phase epitaxy on GaAs substrates, by means of the open photoacoustic cell detection technique and the temperature-rise method under continuous light illumination. The values of the thermal conductivity, diffusivity and specific heat were obtained in the 0<y<0.5 region, where the Al_yGa_1-yAs band gap is mainly direct. The technique presented here is based upon an effective sample model which is shown to be suitable for the determination of the thermal properties of two layer semiconductor specimens. Received: 15 November 1996/Accepted: 5 March 1997     

Laser induced surface damage, thermal transport and microhardness studies on certain organic and semiorganic nonlinear optical crystals

N-alkyl-2,6-dimethyl-4(1H)-pyridinones, salts of 4-dimethylaminopyridine and 2-amino-5-nitropyridine are considered to be potential candidates for nonlinear optical (NLO) applications, in particular for the generation of blue-green laser radiation. Single crystals were grown following the slow evaporation technique at constant temperature. Single-shot laser-induced surface damage thresholds in the range 3–10 GW/cm² were measured using a 18 ns Q-switched Nd:YAG laser. The surface morphologies of the damaged crystals were examined under an optical microscope and the nature of damage identified. The Vicker’s microhardness was determined at a load of 98.07 mN. The thermal transport properties, thermal diffusivity (α), thermal effusivity (e), thermal conductivity (K) and heat capacity (C_p), of the grown crystals were measured by an improved photopyroelectric technique at room temperature. All the results are presented and discussed. PACS 42.70.Mp; 61.66.Hq; 67.80.Gb; 42.65.-k     

The flexoelectric effect in nematic liquid crystals: A statistical- mechanical approach

The flexoelectric coefficients e₁ and e₃ for polar liquid crystals, such as 4-n-pentyl- 4^′-cyanobiphenyl, are investigated theoretically by means of an integral equation approach, which takes into account translational, orientational correlations as well as their coupling. e₁ and e₃ are evaluated from microscopic expressions derived on the basis of a density-functional method. Received 27 April 2001 and Received in final form 27 August 2001     

Heat treatment-induced bond layer diffusion and re-crystallization in copper carbon interface systems measured by modulated IR radiometry

Copper-carbon interface systems with additional Mo bond layers in the range of 25 nm to 200 nm have been analyzed with respect to their effective thermal depth profiles before and after heat treatment using modulated IR radiometry. Comparing the inverse calibrated modulated IR phase lags before and after heat treatment, several effects can be identified: – (1) The effusivity of the interface layer, which – due the contact resistance between the two elements copper and carbon – is rather low before heat treatment, increases considerably with heat treatment. – (2) This effect is accompanied by an increase of the thermal diffusion time of the interface layer, relying on the diffusion of Mo and Cu particles. – (3) The sputter-deposited copper films, which before heat treatment can be characterized as effective multi-layer structures, re-crystallize with heat treatment and show modulated IR phases, which are characteristic for thermally homogeneous thin films. – (4) The thermal diffusion times of the Cu films decrease considerably with heat treatment due to increased thermal diffusivities, and – (5) the thermal effusivities of the Cu films increase with heat treatment.     

Thermal characterization of a liquid resin for 3D printing using photothermal techniques

Thermal properties of a liquid resin were studied by thermal lens spectrometry (TLS) and open photoacoustic cell (OPC), respectively. In the case of the TLS technique, the two mismatched mode experimental configuration was used with a He–Ne laser, as a probe beam and an Argon laser was used as the excitation source. The characteristic time constant of the transient thermal lens was obtained by fitting the theoretical expression to the experimental data in order to obtain the thermal diffusivity (α) of the resin. On the other hand, the sample thermal effusivity (e) was obtained by using the OPC technique. In this technique, an Argon laser was used as the excitation source and was operated at 514 nm with an output power of 30 mW. From the obtained thermal diffusivity (α) and thermal effusivity (e) values, the thermal conductivity (k) and specific heat capacity per unit volume (ρc) of resin were calculated through the relationships k = e(α)^1/2 and ρc = e/(α)^1/2. The obtained thermal parameters were compared with the thermal parameters of the literature. To our knowledge, the thermal characterization of resin has not been reported until now. The present study has applications in laser stereo-lithography to manufacture 3D printing pieces.     

Effect of surface and molecular structure on the dielectric behaviour in thick layers of cyanobiphenyl liquid crystals

The static dielectric studies of hexoxy heptoxy and octoxy cyanobiphenyl liquid crystals (6OCB, 7OCB and 8OCB) and the euteric nematic mixture of 6OCB/7OCB indicate that molecular alignment can be induced by the steel electrod surface of a dielectric thick cell with an electrode gap of about 1 mm. Whereas the permittivity values of alkyl cyanobiphenyls (6CB, 7CB and 8CB) in the nematic phase indicate imperfect alignment of the liquid crystal molecules. The good parallel molecular alignment of alkoxy cyanobiphenyls was to existence of oxygen atom in their molecular structures. These observations demonstrated a sensitive relationship between the molecular alignment, molecular structure and surface effect. Analysis of the dielectric data re-confirmed that the dipole components of the alkoxy cyanobiphenyls along the long molecular axes have a strong tendency for anti-parallel alignment which increases with increasing nematic order, whereas the dipole components perpendicular to the long molecular axes indicate a tendency for parallel alignment.     

An improved photothermal gas analyser: Monitoring of simultaneous thermal diffusivity and thermal effusivity

In this paper we describe a new, simple and fast photothermal method for characterizing simultaneously the thermal diffusivity and thermal effusivity. The improved PTGA essentially combines a photoacoustic cell and a thermal wave pyroelectric cell enclosed in a single compact gas analyzer. The photo- acoustic cell is kept filled with nitrogen and sealed. The pyroelectric cell is also filled with nitrogen and after some warm up time, the nitrogen is exchanged to the gas of interest. It is shown that the analysis of the transient and saturation signals of both photoacoustic and pyroelectric cells are capable of measuring the thermal properties with an accuracy of 5%. The measurements were performed for hydrocarbons as ethane and propane, which are combustible gases. Knowing thermal diffusivity and effusivity, others important properties can be determinate: the thermal conductivity and the volumetric thermal capacity.     

Behavior of the layer compression modulus as a function of frequency near the nematic-smectic-A and re-entrant nematic-smectic-A phase transitions

A progressive cross-over of the layer compression modulus B from a simple power law behavior to a saturation behavior when the frequency is increased from 1 Hz to Hz is observed for the first time near the nematic-smectic-A and the re-entrant nematic-smectic-A phase transitions of a mixture of 4-cyano-4-(n-hexyloxy)biphenyl and 4-cyano-4-(n-octyloxy)biphenyl (6OCB-8OCB). This result shows that the saturation of B determined by second sound near the nematic-smectic-A phase transition of a similar mixture is dynamic in nature, and cannot be associated with the static saturation effect predicted by the dislocation loop model, as proposed previously.PACS: 64.70.Md Transitions in liquid crystals - 64.60.Ht Dynamic critical phenomena - 62.20.Dc Elasticity, elastic constants     

Measurement of thermophysical properties of YBa2Cu3O7−x thin film using picosecond thermoreflectance technique

Simultaneous determination of thermophysical properties of YBa₂Cu₃O_7?x thin film has been carried out using the optical pump–probe method. The thermal diffusivity and thermal effusivity were analyzed from the same picosecond thermoreflectance data. The thermal conductivity and specific heat were then derived from the measured values of the thermal diffusivity and effusivity. The thermal diffusivity, thermal effusivity and thermal conductivity obtained compared favorably with those reported in the literature.     

Effect of annealing on structure and magnetic properties of Fe-N and Fe-Ti-N thin films

The structure and magnetic properties of Fe-N and Fe-Ti-N films have been studied as a function of annealing temperature T_a with a transmission electron microscope and a vibrating sample magnetometer. The as-prepared Fe-N films consist of the γ^′-Fe₄N and α^′′-Fe₁₆N₂ phases, and the Fe-Ti-N films are composed of the γ^′-Fe₄N, α^′′-Fe₁₆N₂, and TiN phases. The structural changes with annealing temperature in the Fe-N films are distinct. The α^′′-Fe₁₆N₂ decomposes into α+γ^′ phases in the Fe-N film annealed at about 300 °C, and it disappears in the film annealed at 350 °C. Annealing of the Fe-Ti-N films shows no structural changes between room temperature (RT) and 500 °C. The saturation magnetization 4πM_S and coercivity H_c of the Fe-N films change drastically with the annealing temperature T_a, whereas those of the Fe-Ti-N films do not change with T_a up to 500 °C. These results indicate that the additon of Ti may improve the thermal stability of Fe-N films. Recieved: 6 Juli 1998 / Accepted: 19 Oktober 1998 / Published online: 10 March 1999     

Resonant photoacoustic simultaneous detection of methane and ethylene by means. of a 1.63-μm diode laser

A compact multi-component trace-gas detector based on the resonant photoacoustic technique and a NIR external cavity diode laser has been developed. It has been characterized using a mixture of ethylene and methane diluted in ambient air. A spectroscopic investigation of combination bands and overtones between 5900 and 6250 cm^-1, obtained with an IR pulsed laser photoacoustic spectrometer, allowed us to find a wavelength region where the 2ν₃ overtone of CH₄ and the ν₅+ν₉ combination band of C₂H₄ show uncongested rotational lines. Using a single-mode scan of the diode laser in this region, around 6150 cm^-1, the sensitivity for the simultaneous detection of ethylene and methane is 8 ppm/mW and 40 ppm/mW respectively. Factors affecting the sensitivity and selectivity of the detection system and possible improvements suitable to reach the sub-ppm detection limit are discussed. Received: 1 August 2001 / Revised version: 28 November 2001 / Published online: 7 February 2002 An erratum to this article is available at .     

The formation and thermostability of MgO and MgAl2O4 nanoparticles in oxidized SiC particle-reinforced Al-Mg composites

Interfacial reactions and their products in oxidized SiC particle-reinforced Al-Mg matrix composites were investigated using X-ray diffraction and Field EmissionScanning Electron Microscopy (FE-SEM). Observation of the interfacial reaction between oxidized SiC particles and aluminum alloys containing Mg showed that nanoparticles of MgO form initially and do not change form when more than 4 wt. % Mg is in the matrix. However, MgO transforms into octahedral MgAl₂O₄ crystals when less than 2 wt. % Mg is in the matrix .Comparison of the amounts and the sizes of the reaction products MgAl₂O₄ and MgO between the Al-Mg alloyswith different matrix compositions shows that fewer MgAl₂O₄ crystals form at the surface of the particles in the 2014Al matrix composite than in the Al-2 wt. % Mg (Al-2Mg) matrix composite. Also, the size of MgAl₂O₄ in the former composite is greater than that of the latter composite under the same conditions. However, the amount and the size of MgO crystals that form in the Al-4 wt. % Mg (Al-4Mg) matrix composite is almost the same as that of the Al-8 wt. % Mg (Al-8Mg) composite, and the size of MgO changes a little during heat-treatment at elevated temperatures. The amount of the reaction product (either MgO or MgAl₂O₄) depends on nucleation rates and density of nucleation sites on the oxidized SiC particles at the initial reaction. The more completely the nuclei cover the surface of the oxidized SiC particles, the smaller the resulting size. According to the results, an addition of Mg into the matrix can be used to control the interfacial characteristics in the oxidized SiC/Al composites. Received: 25 January 2001 / Accepted: 26 January 2001 / Published online: 23 May 2001     

Photopyroelectric measurement of thermal effusivity of liquids by sample's thickness scan

A method based on the sample's thickness scan of the amplitude of the photopyroelectric (PPE) signal is proposed as an alternative for thermal effusivity measurement of liquids. The proposed method uses a combined amplitude-phase information and needs the knowledge of the absolute values of the sample's thickness and phase of the signal. The accuracy of the method is similar with that of previously reported frequency-scanned methods, provided an accurate control of the cell's (sample's) thickness is performed. A 479 Ws^1/2/m²K room temperature value for the thermal effusivity of silicon oil was found, with a 0.1 μm step thickness control.     

Infrared absorption-edges of molecular nonlinear optical crystals: an <Emphasis Type="Italic">ab initio</Emphasis> calculation

A theoretical model suitable for calculating infrared absorption-edges of molecular nonlinear optical (NLO) crystals is introduced from high-level calculations of molecular vibrational spectra. The model is useful for elucidating the relationship between the molecular vibration and macroscopic absorption edges on the IR side of organic nonlinear optical crystals. The first-principle ab initio method carries out the calculations of IR absorption-edges of several typical molecular NLO crystals. These molecular NLO crystals include urea, 2-methyl-4-nitroaniline (MNA), meta-dinotrobenzene (MDNB), 3-methyl-4-methooxy-4^′-nitrostilbene (MMONS), and 3-hydroxyl-4^′-nitrostilbene (HMONS). The calculated results are compared with the measurements and good agreement is found between them. The experimentally unknown values of IR absorption-edges of some new synthesized crystals are predicted. The theoretical analyses of the structural origins of IR absorption cut-offs are discussed. The results are helpful for the molecular simulation and design of potential infrared molecular NLO crystals. Received: 9 April 2002 / Accepted: 18 July 2002 / Published online: 28 October 2002 RID="*" ID="*"Corresponding author. Fax: +86-591/3714946, E-mail: wkc@ms.fjirsm.ac.cn     

Impurity nuclear physics

Using a germanium-detector array for hypernuclear γ spectroscopy (Hyperball), we measured B(E2) of the ⁷ _ΛLi hypernucleus and observed a significant shrinkage of the ⁶Li core induced by a Λ-particle. In this way, nuclear properties can be drastically changed by introducing a Λ-particle, which can be investigated by high-resolution hypernuclear γ spectroscopy. In the future neutron-rich hypernuclei will also be studied, where interesting modifications of nuclear structure by a Λ-particle are expected. Received: 1 May 2001 / Accepted: 4 December 2001