Facile and convenient method of deuterium gas generation using a Pd/C-catalyzed H2-D2 exchange reaction and its application to synthesis of deuterium-labeled compounds

The Pd/C-catalyzed H(2)-D(2) exchange reaction using a H(2)-D(2)O combination provided a general, efficient and environmentally friendly route for the preparation of deuterium gas (D(2)). H(2) sealed in a reaction flask was converted into nearly pure D(2), which could be used for the Pd/C-catalyzed one-pot reductive deuteration of various reducible functionalities and the chemoselective one-pot deuterogenation of olefin and acetylene. Additionally, we established the capturing method of the generated D(2) in a balloon, which was successfully applied to the Pd/C-catalyzed reductive mono-N-alkylation of a primary amine using nitrile as the alkylating reagent.     

Tunneling chemical reactions D + H2 --> DH + H and D + DH --> D2 + H in solid D2-H2 and HD-H2 mixtures: an electron-spin-resonance study

Tunneling chemical reactions D + H2 --> DH + H and D + DH --> D2 + H in solid HD-H2 and D2-H2 mixtures were studied in the temperature range between 4 and 8 K. These reactions were initiated by UV photolysis of DI molecules doped in these solids for 30 s and followed by measuring the time course of electron-spin-resonance (ESR) intensities of D and H atoms. ESR intensity of D atoms produced by the photolysis decreases but that of H atoms increases with time. Time course of the D and H intensities has the fast and slow processes. The fast process, which finishes within approximately 300 s after the photolysis, is assigned to the reaction of D atom with one of its nearest-neighboring H2 molecules, D(H2)n(HD)(12-n) --> H(H2)(n-1)(HD)(13-n) or D(H2)n(D2)(12-n) --> H(HD)(H2)(n-1)(D2)(12-n) for 12 > or = n > or = 1. Rate constant for the D + H2 reaction between neighboring D atom-H2 molecule pair is determined to be (7.5 +/- 0.7) x 10(-3) s(-1) in solid HD-H2 and (1.3+/-0.3) x 10(-2) s(-1) in D2-H2 at 4.1 K, which is very close to that calculated based on the theory of chemical reaction in gas phase by Hancock et al. [J. Chem. Phys. 91, 3492 (1989)] and Takayanagi and Sato [J. Chem. Phys. 92, 2862 (1990)]. This rate constant was found to be independent of temperature up to 7 K within experimental error of +/-30%. The slow process is assigned to the reaction of D atom produced in a cage fully surrounded by HD or D2 molecules, D(HD)12 or D(D2)12. This D atom undergoes the D + DH reaction with one of its nearest-neighboring HD molecules in solid HD-H2 or diffuses to the neighbor of H2 molecules to allow the D + H2 reaction in solid HD-H2 and D2-H2. The former is the main channel in solid HD-H2 below 6 K where D atoms diffuse very slowly, whereas the latter dominates over the former above 6 K. Rate for the reactions in the slow process is independent of temperature below 6 K but increases with the increase in temperature above 6 K. We found that the increase is due to the increase in hopping rate of D atoms to the neighbor of H2 molecules. Rate constant for the D + DH reaction was found to be independent of temperature up to 7 K as well.     

Theoretical study on the reaction mechanism of the gas-phase H2/CO2/Ni(3D) system

The ground-state potential energy surface (PES) in the gas-phase H2/CO2/Ni(3D) system is investigated at the CCSD(T)//B3LYP/6-311+G(2d,2p) levels in order to explore the possible reaction mechanism of the reverse water gas shift reaction catalyzed by Ni(3D). The calculations predict that the C-O bond cleavage of CO2 assisted by co-interacted H2 is prior to the dissociation of the H2, and the most feasible reaction path for Ni(3D) + H2 + CO2 --> Ni(3D) + H2O + CO is endothermic by 12.5 kJ mol(-1) with an energy barrier of 103.9 kJ mol(-1). The rate-determining step for the overall reaction is predicted to be the hydrogen migration with water formation. The promotion effect of H2 on the cleavage of C-O bond in CO2 is also discussed and compared with the analogous reaction of Ni(3D) + CO2 --> NiO + CO, and the difference between triplet and singlet H2/CO2/Ni systems is also discussed.     

Isotopic exchange processes in cold plasmas of H2/D2 mixtures

Isotope exchange in low pressure cold plasmas of H(2)/D(2) mixtures has been investigated by means of mass spectrometric measurements of neutrals and ions, and kinetic model calculations. The measurements, which include also electron temperatures and densities, were performed in a stainless steel hollow cathode reactor for three discharge pressures: 1, 2 and 8 Pa, and for mixture compositions ranging from 100% H(2) to 100% D(2). The data are analyzed in the light of the model calculations, which are in good global agreement with the experiments. Isotope selective effects are found both in the surface recombination and in the gas-phase ionic chemistry. The dissociation of the fuel gas molecules is followed by wall recycling, which regenerates H(2) and D(2) and produces HD. Atomic recombination at the wall is found to proceed through an Eley-Rideal mechanism, with a preference for reaction of the adsorbed atoms with gas phase D atoms. The best fit probabilities for Eley-Rideal abstraction with H and D are: γ(ER H) = 1.5 × 10(-3), γ(ER D) = 2.0 × 10(-3). Concerning ions, at 1 Pa the diatomic species H(2)(+), D(2)(+) and HD(+), formed directly by electron impact, prevail in the distributions, and at 8 Pa, the triatomic ions H(3)(+), H(2)D(+), HD(2)(+) and D(3)(+), produced primarily in reactions of diatomic ions with molecules, dominate the plasma composition. In this higher pressure regime, the formation of the mixed ions H(2)D(+) and HD(2)(+) is favoured in comparison with that of H(3)(+) and D(3)(+), as expected on statistical grounds. The model results predict a very small preference, undetectable within the precision of the measurements, for the generation of triatomic ions with a higher degree of deuteration, which is probably a residual influence at room temperature of the marked zero point energy effects (ZPE), relevant for deuterium fractionation in interstellar space. In contrast, ZPE effects are found to be decisive for the observed distribution of monoatomic ions H(+) and D(+), even at room temperature. The final H(+)/D(+) ratio is determined to a great extent by proton (and deuteron) exchange, which favours the enhancement of H(+) and the concomitant decrease of D(+).     

Gas phase H/D exchange kinetics: DI versus D2O

The gas phase H/D exchange reactions of bradykinin (M + 3H)3+ ions with D2O and DI were monitored in a quadrupole ion trap mass spectrometer. The H/D exchange kinetics of both chemical probes (D2O and DI) indicate the presence of two noninterconverting reactive gas phase ion populations of bradykinin (M + 3H)3+ at room temperature. The H/D exchange involving DI, however, generally proceeds faster than that involving D2O. The rate observations described here can be rationalized on the basis of the "relay mechanism" (see Campbell et al. J. Am. Chem. Soc. 1995, 117, 12840-12854) recently proposed to account for H/D exchange between D2O and gaseous protonated polypeptides. The higher exchange rate with DI is believed to arise primarily as a result of its lower gas-phase acidity relative to that of D2O and, secondarily, as a result of the longer bond length of DI relative to that of OD in D2O.     

Mass spectrometric separation and quantitation of overlapping isotopologues. H2O/HOD/D2O and H2Se/HDSe/D2Se mixtures

Three conceptually different mathematical methods are presented for accurate mass spectrometric determination of H2O/HOD/D2O and H2Se/HDSe/D2Se concentrations from mixtures. These are alternating least-squares, weighted two-band target entropy minimization, and a statistical mass balance model. The otherwise nonmeasurable mass spectra of partially deuterated isotopologues (HOD and HDSe) are mathematically constructed. Any recorded isotopologue mixture mass spectra are then deconvoluted by least-squares into their components. This approach is used to study the H2O/D2O exchange reaction, and is externally validated gravimetrically. The H2O/D2O exchange equilibrium constant is also measured from the deconvoluted 70 eV electron impact GC/MS data (K = 3.85 +/- 0.03).     

Highly efficient D2 generation by dehydrogenation of formic acid in D2O through H+/D+ exchange on an iridium catalyst: application to the synthesis of deuterated compounds by transfer deuterogenation

Deuterated compounds have received increasing attention in both academia and industrial fields. However, preparations of these compounds are limited for both economic and practical reasons. Herein, convenient generation of deuterium gas (D(2)) and the preparation of deuterated compounds on a laboratory scale are demonstrated by using a half-sandwich iridium complex with 4,4'-dihydroxy-2,2'-bipyridine. The "umpolung" (i.e., reversal of polarity) of a hydrogen atom of water was achieved in consecutive reactions, that is, a cationic H(+)/D(+) exchange reaction and anionic hydride or deuteride transfer, under mild conditions. Selective D(2) evolution (purity up to 89?%) was achieved by using HCO(2)H as an electron source and D(2)O as a deuterium source; a rhodium analogue provided HD gas (98?%) under similar conditions. Furthermore, pressurized D(2) (98?%) without CO gas was generated by using DCO(2)D in D(2)O in a glass autoclave. Transfer deuterogenation of ketones gave α-deuterated alcohols with almost quantitative yields and high deuterium content by using HCO(2)H in D(2)O. Mechanistic studies show that the H(+)/D(+) exchange reaction in the iridium hydride complex was much faster than β-elimination and hydride (deuteride) transfer.     

Reactive collisions in quadrupole cells. 2. H/D exchange reactions of enolate ions with CH3od and C2H5OD

The H/D exchange reactions of enolate ions with CH₃OD and C₂H₅OD at low collision energies in the quadrupole collision cell of a hybrid tandem BEqQ mass spectrometer have been studied. The optimum parameters for exchange were elucidated using the enolate ion of acetone as a test reactant ion. With the exception of the enolate ions of 2,4-pentanedione and dimethylmalonate, all the enolate ions studied underwent exchange with CH₃OD and C₂H₅OD. Ion signals were observed corresponding to exchange of from one to all of the enolic hydrogen atoms. The H/D exchange reaction was more facile with C₂H₅OD as the reagent gas, and the results with this gas clearly permit a count of the number of enolic hydrogen atoms present in the molecule.     

Thermochemistry and accurate quantum reaction rate calculations for H2/HD/D2 + CH3

Accurate quantum-mechanical results for thermodynamic data, cumulative reaction probabilities (for J = 0), thermal rate constants, and kinetic isotope effects for the three isotopic reactions H2 + CH3 --> CH4 + H, HD + CH3 --> CH4 + D, and D2 + CH3 --> CH(3)D + D are presented. The calculations are performed using flux correlation functions and the multiconfigurational time-dependent Hartree (MCTDH) method to propagate wave packets employing a Shephard interpolated potential energy surface based on high-level ab initio calculations. The calculated exothermicity for the H2 + CH3 --> CH4 + H reaction agrees to within 0.2 kcal/mol with experimentally deduced values. For the H2 + CH3 --> CH4 + H and D2 + CH3 --> CH(3)D + D reactions, experimental rate constants from several groups are available. In comparing to these, we typically find agreement to within a factor of 2 or better. The kinetic isotope effect for the rate of the H2 + CH3 --> CH4 + H reaction compared to those for the HD + CH3 --> CH4 + D and D2 + CH3 --> CH(3)D + D reactions agree with experimental results to within 25% for all data points. Transition state theory is found to predict the kinetic isotope effect accurately when the mass of the transferred atom is unchanged. On the other hand, if the mass of the transferred atom differs between the isotopic reactions, transition state theory fails in the low-temperature regime (T < 400 K), due to the neglect of the tunneling effect.     

Overtone spectroscopy of H2D+ and D2H+ using laser induced reactions

The method of laser induced reaction is used to obtain high-resolution IR spectra of H2D+ and D2H+ in collision with n-H2 at a nominal temperature of 17 K. For this purpose three cw-laser systems have been coupled to a 22-pole ion trap apparatus, two commercial diode laser systems in the ranges of 6100-6600 cm(-1) and 6760-7300 cm(-1), respectively, and a high-power optical parametric oscillator tunable in the range of 2600-3200 cm(-1). In total, 27 new overtone and combination transitions have been detected for H2D+ and D2H+, as well as a weak line in the nu1 vibrational band of H2D+ (2(20)<--1(01)) at 3164.118 cm(-1). The line positions are compared to high accuracy ab initio calculations, showing small but mode-dependent differences, being largest for three vibrational quanta in the nu2 symmetric bending of H2D+. Within the experimental accuracy, the relative values of the ab initio predicted Einstein B coefficients are confirmed.     

环丙烷衍生物在D2O离子体系中的H/D交换反应

在D2O化学反应气条件下研究了环丙烷衍生物的H/D交换反应特性.发现了三种新的产物离子[M+1]+、[M+2]+和[M+3]+.应用碰撞诱导碎裂(CID)技术研究了这些离子的碎裂反应特性.实验结果表明三种新的产物离子是由反应物与试剂离子之间发生H/D交换反应生成的.并获得了环丙烷衍生物结构中活泼氢位置及其数量的信息.     

Reactivity of C10H7+ and C10D7+ with H2 AND D2

We have investigated, both theoretically and experimentally, the reactions of naphthylium C10H7+ and d-naphthylium C10D7+ ions with H2 and D2. Cross sections as functions of the collision energy have been measured for a variety of reaction channels. Theoretical calculations have been carried out at the density functional theory level which utilizes the hybrid functional B3LYP and the split-valence 6-31G* basis set. The key features of the potential energy surfaces and the relevant thermochemical parameters have been calculated and they provide insights on the reaction mechanisms. The bimolecular reactivity of C10H7+ with H2 is dominated by the production of naphthalene cation C10H8+. The reaction is not a direct atom-abstraction process, but instead it proceeds via the formation of a stable intermediate complex C10H9+ of sigma type geometry, with a significant mobility of hydrogen along the ring. This mobility allows the scrambling of the hydrogen atoms and causes the successive statistical fragmentation of the complex into a variety of product channels. Elimination of one H(D) atom appears to be favored over elimination of one H2 or HD molecule. Alternatively, the intermediate complex can be stabilized either by collision with a third body or by emission of a photon.     

Barrier Height Effect on Cl+H2(D2) Reaction

Three-dimensional time-dependent quantum wave packet calculation was performed to study the reaction dynamics of Cl+H2(D2) on two potential energy surfaces (CW PESs). The first CW PES is with spin-orbit correction; the second is without spin-orbit correction. The integral cross-section and reaction probability as a function of collision energy are calculated in the collision energy range of 0.1 eV to 1.4 eV. For reaction of Cl with D2, the reaction section with spin-orbit correction has a shift toward the high energy because the barrier height increases. As for the reaction of Cl with H2 at low collision energy, it is more reactive on the PES with spin-orbit correction than on the low barrier height PES without spin-orbit correction, due to the tunnel effect for the reaction of the Cl with H2. When the collision energy is higher than 0.7 eV, the reactivity on the low barrier height PES is larger than that on the high barrier height PES. It is believed that the barrier height plays a very important role in the reactivity of Cl with (H2, D2). For the Cl+H2 reaction the barrier width is also very important because of the tunneling effect.     

Novel 3D, 2D, and 0D first-row coordination compounds with 4,4'-bipyridine-N,N'-dioxide incorporating sulfur-containing anions

The reaction of M(S2O6) (M = Cu(II), Ni(II), and Co(II)) with 4,4'-bipyridine-N,N'-dioxide (bpdo) results in the formation of novel 3D, 2D, and mononuclear complexes. Complex 1, {[Cu(H2O)(bpdo)2](S2O6)(H2O)}n, is a 2-D wavelike polymer with the Cu(II) ion located on a 2-fold axis and having a distorted square-pyramidal coordination sphere. With Co(II) and Ni(II), 3-D complexes, {[M(bpdo)3](S2O6)(C2H5OH)7}n [M = Co(II) (2), Ni(II) (3)], were obtained. The metal atoms are situated on centers of symmetry and have octahedral environments coordinated to six bpdo molecules. The same reaction in aqueous solution with a metal/ligand ratio of 1:1 results in the formation of mononuclear complexes, {[M(bpdo)(H2O)5](SO4)(H2O)2} [M = Co(II) (4), Ni(II) (5)], accompanied by the decomposition of the dithionate anions S2O6(2-) to sulfate anions SO4(2-).     

Full-dimensional time-dependent wave packet dynamics of H2 + D2 reaction

Collision induced dissociation (CID), four center reaction (4C), and single exchange reaction (SE) in H(2) (v(1) = high) + D(2) (v(2) = low) were studied by means of time-dependent wave packet approach within a full-dimensional model. Initial state-selected total reaction probabilities for the three competitive processes have been computed on two realistic global potential energy surfaces of Aguado-Suárez-Paniagua and Boothroyd-Martin-Keogh-Peterson (BMKP) with the total angular momentum J = 0. The role of both vibrationally excited and rotationally excited reagents was examined by varying the initial vibrational and rotational states. The vibrational excitation of the hot diatom gives an enhancement effect on the CID process, while the vibrational excitation of the cold diatom gives an inhibition effect. The rotational excitation of both reagents has a significant effect on the reaction process. The 4C and SE probabilities are at least one order of magnitude smaller than the CID probabilities over the energy range considered. Isotope substitution effects were also studied by substituting the collider D(2) by H(2) and HD on the BMKP potential energy surfaces. The CID process is most efficient for the H(2) + D(2) combination and least efficient for the H(2) + H(2) combination and is different for the 4C and SE processes.     

Electron spin resonance study on H6+, H5D+, H4D2+, and H2D4+ in solid parahydrogen

We carried out an electron spin resonance (ESR) study on hydrogen ion radicals produced by radiolysis of solid para-H(2). In addition to quartet ESR lines proposed to be H(2) (+)-core H(6) (+) (D(2d)) ions in solid para-H(2) [T. Kumada et al., Phys. Chem. Chem. Phys. 7, 776 (2005)], we newly observed totally more than 50 resolved lines in gamma-ray irradiated solid para-H(2)-ortho-D(2) (1 mol %) and para-H(2)-HD (1 mol %) mixtures. We assigned these lines to be isotope substituents of H(2) (+)-core H(6) (+) ions such as H(5)D(+), H(4)D(2) (+), and H(2)D(4) (+) throughout the comparison of their ESR parameters with theoretical results. These results provide a conclusive evidence that H(2) (+)-core H(6) (+) ions are generated in irradiated solid hydrogens. Analysis of the EPR spectrum and ab initio calculations predicts D(2d) symmetry of the H(6) (+) ions, whereas a lowering symmetry (D(2d)-->C(2v)) induced by asymmetric nuclear wave function is observed in H(5)D(+) and H(4)D(2) (+). We also observed isotope-substitution reactions such as H(6) (+)+D(2)-->H(4)D(2) (+)+H(2) and H(6) (+)+HD-->H(5)D(+)+H(2), which are analogous to the well-known isotope-condensation reactions of H(3) (+) in dark nebula, H(3) (+)+HD-->HD(2) (+)+H(2) and HD(2) (+)+HD-->D(3) (+)+H(2).     

Experimental and theoretical evidence for homogeneous catalysis in the gas-phase reaction of SiH(2) with H(2)O (and D(2)O): a combined kinetic and quantum chemical study

Time-resolved kinetic studies of the reaction of silylene, SiH(2), with H(2)O and with D(2)O have been carried out in the gas phase at 297 K and at 345 K, using laser flash photolysis to generate and monitor SiH(2). The reaction was studied independently as a function of H(2)O (or D(2)O) and SF(6) (bath gas) pressures. At a fixed pressure of SF(6) (5 Torr), [SiH(2)] decay constants, k(obs), showed a quadratic dependence on [H(2)O] or [D(2)O]. At a fixed pressure of H(2)O or D(2)O, k(obs) values were strongly dependent on [SF(6)]. The combined rate expression is consistent with a mechanism involving the reversible formation of a vibrationally excited zwitterionic donor-acceptor complex, H(2)Si...OH(2) (or H(2)Si...OD(2)). This complex can then either be stabilized by SF(6) or it reacts with a further molecule of H(2)O (or D(2)O) in the rate-determining step. Isotope effects are in the range 1.0-1.5 and are broadly consistent with this mechanism. The mechanism is further supported by RRKM theory, which shows the association reaction to be close to its third-order region of pressure (SF(6)) dependence. Ab initio quantum calculations, carried out at the G3 level, support the existence of a hydrated zwitterion H(2)Si...(OH(2))(2), which can rearrange to hydrated silanol, with an energy barrier below the reaction energy threshold. This is the first example of a gas-phase-catalyzed silylene reaction.     

Nonadiabatic effects in the H+D2 reaction

The state-to-state dynamics of the H+D2 reaction is studied by the reactant-product decoupling method using the double many-body expansion potential energy surface. Two approaches are compared: one uses only the lowest adiabatic sheet while the other employs both coupled diabatic sheets. Rotational distributions for the reaction H+D2 (upsilon = 0, j = 0)-->HD(upsilon' = 3, j')+D are obtained at eight different collision energies between 1.49 and 1.85 eV; no significant difference are found between the two approaches. Initial state-selected total reaction probabilities and integral cross sections are also given for energies ranging from 0.25 up to 2.0 eV with extremely small differences being observed between the two sets of results, thus showing that the nonadiabatic effects in the title reaction are negligible at least for small energies below 2.0 eV.     

Quantum sieving effect of three-dimensional Cu-based organic framework for H2 and D2

The crystal structure of [Cu(4,4'-bipyridine) 2(CF 3SO 3) 2] n metal-organic framework (CuBOTf) of one-dimensional pore networks after pre-evacuation at 383 K was determined with synchrotron X-ray powder diffraction measurement. Effective nanoporosity of the pre-evacuated CuBOTf was determined with N 2 adsorption at 77 K. The experimental H 2 and D 2 adsorption isotherms of CuBOTf at 40 and 77 K were measured and then compared with GCMC-simulated isotherms using the effective nanoporosity. The quantum-simulated H 2 and D 2 isotherms at 77 K using the Feynman-Hibbs effective potential coincided with the experimental ones, giving a direct evidence on the quantum molecular sieving effect for adsorption of H 2 and D 2 on CuBOTf. However, the selectivity for the 1:1 mixed gas of H 2 and D 2 was 1.2. On the contrary, experimental H 2 and D 2 isotherms at 40 K had an explicit adsorption hysteresis, originating from the marked pore blocking effect on measuring the adsorption branch. The blocking effect for quantum H 2 is more prominent than that for quantum D 2; the selectivity for D 2 over H 2 at 40 K was in the range of 2.6 to 5.8. The possibility of the quantum molecular sieving effect for H 2 and D 2 adsorption on [Cu 3(benzene-1,3,5-tricarboxylate) 2(H 2O) 3] n of three-dimensional pore networks was also shown at 77 K.     

Acetone and water on TiO2(110): H/D exchange

Isotopic H/D exchange between coadsorbed acetone and water on the TiO2(110) surface was examined using temperature programmed desorption (TPD) as a function of coverage and two surface pretreatments (O2 oxidation and mild vacuum reduction). Coadsorbed acetone and water interact repulsively on reduced TiO2(110) on the basis of results from the companion paper to this study, with water exerting a greater influence in destabilizing acetone and acetone having only a nominal influence on water. Despite the repulsive interaction between these coadsorbates, about 0.02 monolayers (ML) of a 1 ML d6-acetone on the reduced surface (vacuum annealed at 850 K to a surface oxygen vacancy population of 7%) exhibits H/D exchange with coadsorbed water, with the exchange occurring exclusively in the high-temperature region of the d6-acetone TPD spectrum at approximately 340 K. The effect was confirmed with combinations of d0-acetone and D2O. The extent of exchange decreased on the reduced surface for water coverages above approximately 0.3 ML due to the ability of water to displace coadsorbed acetone from first layer sites to the multilayer. In contrast, the extent of exchange increased by a factor of 3 when surface oxygen vacancies were pre-oxidized with O2 prior to coadsorption. In this case, there was no evidence for the negative influence of high water coverages on the extent of H/D exchange. Comparison of the TPD spectra from the exchange products (either d1- or d5-acetone depending on the coadsorption pairing) suggests that, in addition to the 340 K exchange process seen on the reduced surface, a second exchange process was observed on the oxidized surface at approximately 390 K. In both cases (oxidized and reduced), desorption of the H/D exchange products appeared to be reaction limited and to involve the influence of OH/OD groups (or water formed during recombinative desorption of OH/OD groups) instead of molecularly adsorbed water. The 340 K exchange process is assigned to reaction at step sites, and the 390 K exchange process is attributed to the influence of oxygen adatoms deposited during surface oxidation. The H/D exchange mechanism likely involves an enolate or propenol surface intermediate formed transiently during the desorption of oxygen-stabilized acetone molecules.