Synthesis of metal-chelating lipids to sensitize lanthanide ions

Sensitization of lanthanide ions is important for lanthanide ion-based assays and sensing. To the best of our knowledge, there are very few reports of lanthanide ion sensitization after it is incorporated into the liposome surface. This paper describes the syntheses of several saturated and polymerizable metal-chelating lipids based on chelidamic acid. The lipids are synthesized either from (S)-ornithine or racemic 2,3-diaminopropanoic acid. These lipids as well as polymerized liposomes incorporating these lipids sensitize lanthanide ions. Liposomes from the lipid 18-Eu(3+) provided a probe that relies not only on the emission wavelengths of Eu(3+) but also on a reproducible lifetime that can be used for protein identification.     

Solid-supported synthesis of polymerizable lanthanide-ion chelating lipids for protein detection

Usually, lipids are synthesized employing solution-phase organic synthesis techniques. Though successful, the purifications can be difficult to accomplish due to the amphiphilic nature of the molecules. Herein, we demonstrate the advantages of a solid-phase approach for preparing a variety of metal-chelating lipids. A number of saturated and polymerizable metal-chelating lipids were prepared using this methodology. This approach requires one chromatographic purification after cleaving the lipids from the solid support. We also demonstrate that the resulting polymerized liposomes (containing Eu3+) possess the appropriate luminescence properties for the qualitative and quantitative determination of proteins.     

Synthesis of new,pyrene-containing,metal-chelating lipids and sensing of cupric ions

The syntheses of several saturated, pyrene-containing, metal-chelating lipids are described. These lipids are capable of strongly binding to transition metal ions employing the metal-chelating headgroup. The excimer-to-monomer ratio of the pyrene groups changes with addition of cupric ions to the liposomes. Three other transition metal ions (Zn(2+), Ni(2+), and Hg(2+)) did not cause any appreciable changes in the excimer-to-monomer ratio. [reaction--see text]     

Synthesis of a polymerizable metal-ion-chelating lipid for fluid bilayers.

Hydrated lipid structures, such as liposomes, that display tethered metal-ion-chelating groups have proven useful in peptide and protein binding, as well as 2D protein crystallization through molecular recognition of accessible histidine sites in proteins and peptides. Polymerizable metal-ion-chelating lipids bearing a reactive diacetylene group have been described. These interesting compounds can be polymerized in the solid-analogous phase. Here we describe the design of the first polymerizable metal-ion-chelating lipid that can be used in the fluid, i.e., liquid analogous, phase of lipid bilayers. The synthesis of 1-palmitoyl-2-[8-[(E,E)-2',4'-hexadienoyloxy]octanoyl]-sn-glycero-3-N-[11-[N',N'-bis[carboxymethyl]imino]-3,6,9-trioxaundecanoyl] phosphatidylethanolamine (1) is described. The chelator moiety, iminodiacetate (IDA), was linked to the polymerizable phosphatidylethanolamine (PE) with a terminal 2,4-hexadienoyl (sorbyl) group through an oligo(ethylene glycol)-based spacer. Lipid 1-Cu complex is designed to be combined with the corresponding polymerizable matrix lipids (bis-SorbPC) to form functionalized liposomes that can be stabilized by various polymerization methods.     

Synthesis of conjugated diacetylene, metal-chelating monomers for polymerizable monolayer assemblies

[see structure]. Self-assembled monolayers (SAMs) of thiols on gold have been used for numerous applications. For protein targeting applications, one successful strategy is to use a metal-chelating SAM. It has also been demonstrated that polymerized SAMs are much more stable than non-polymerized counterparts. We report herein, the synthesis of several polymerizable, metal-chelating thiols capable of complexing luminescent lanthanide ions.     

Design of liposomes containing photopolymerizable phospholipids for triggered release of contents

We describe a novel class of light-triggerable liposomes prepared from a photo-polymerizable phospholipid DC_8,9PC (1,2-bis (tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine) and DPPC (1,2-Dipalmitoyl-sn-Glycero-3-Phosphocholine). Exposure to UV (254 nm) radiation for 0–45 min at 25 °C resulted in photo-polymerization of DC_8,9PC in these liposomes and the release of an encapsulated fluorescent dye (calcein). Kinetics and extents of calcein release correlated with mol% of DC_8,9PC in the liposomes. Photopolymerization and calcein release occurred only from DPPC/DC_8,9PC but not from Egg PC/DC_8,9PC liposomes. Our data indicate that phase separation and packing of polymerizable lipids in the liposome bilayer are major determinants of photo-activation and triggered contents release.     

Preparation and characterization of poly(lipid)-coated, fluorophore-doped silica nanoparticles for biolabeling and cellular imaging

The fabrication, characterization, and implementation of poly(lipid)-coated, highly luminescent silica nanoparticles as fluorescent probes for labeling of cultured cells are described. The core of the probe is a sol-gel-derived silica nanoparticle, 65-100 nm in diameter, in which up to several thousand dye molecules are encapsulated (Lian, W.; et al. Anal. Biochem. 2004, 334, 135-144). The core is coated with a membrane composed of bis-sorbylphosphatidylcholine, a synthetic polymerizable lipid that is chemically cross-linked to enhance the environmental and chemical stability of the membrane relative to a fluid lipid membrane. The poly(lipid) coating has two major functions: (i) to reduce nonspecific interactions, based on the inherently biocompatible properties of the phosphorylcholine headgroup, and (ii) to permit functionalization of the particle, by doping the coating with lipids bearing chemically reactive or bioactive headgroups. Both functions are demonstrated: (i) Nonspecific adsorption of dissolved proteins to bare silica nanoparticles and of bare nanoparticles to cultured cells is significantly reduced by application of the poly(lipid) coating. (ii) Functionalization of poly(lipid)-coated nanoparticles with a biotin-conjugated lipid creates a probe that can be used to target both dissolved protein receptors as well as receptors on the membranes of cultured cells. Measurements performed on single nanoparticles bound to planar supported lipid bilayers verify that the emission intensity of these probes is significantly greater than that of single protein molecules labeled with several fluorophores.     

Membrane composition determines the fate of aggregated vesicles

Vesicles incorporating a fluorescent metal-chelating lipid can be linked together by addition of copper(II) and poly-L-histidine, but the stability of adhering vesicles towards fusion depends upon membrane composition.     

Stable polymeric nanoballoons: lyophilization and rehydration of cross-linked liposomes

The cross-linking of supramolecular assemblies of hydrated lipids is an effective method to stabilize these assemblies to disruption by surfactants or aqueous alcohol. The heterobifunctional lipids, Acryl/DenPC(16,18) and Sorb/DenPC(18,21), are examples of a new class of polymerizable lipid designed for the creation of cross-linked lipid structures. The robust nature of cross-linked liposomes was demonstrated by lyophilization of the liposomes followed by their essentially complete redispersion in water. The resulting liposomes were compared to the original sample by quasi-elastic light scattering and transmission electron microscopy. There was no major change in the size or structure of the cross-linked liposomes after rehydration of the freeze-dried powder of liposomes. Moreover, the rehydrated cross-linked liposomes continued to be resistant to surfactant solubilization. Neutral cross-linked liposomes were predominantly redispersed after freeze-drying with the aid of bath sonication. The small amount of residual liposome aggregation observed with neutral liposomes could be prevented by incorporating a surface charge into the liposome or attaching hydrophilic polymers, for example, poly(ethylene glycol), onto the liposome.     

Fluorescent lipids: functional parts of fusogenic liposomes and tools for cell membrane labeling and visualization

In this paper a rapid and highly efficient method for controlled incorporation of fluorescent lipids into living mammalian cells is introduced. Here, the fluorescent molecules have two consecutive functions: First, they trigger rapid membrane fusion between cellular plasma membranes and the lipid bilayers of their carrier particles, so called fusogenic liposomes, and second, after insertion into cellular membranes these molecules enable fluorescence imaging of cell membranes and membrane traffic processes. We tested the fluorescent derivatives of the following essential membrane lipids for membrane fusion: Ceramide, sphingomyelin, phosphocholine, phosphatidylinositol-bisphosphate, ganglioside, cholesterol, and cholesteryl ester. Our results show that all probed lipids could more efficiently be incorporated into the plasma membrane of living cells than by using other methods. Moreover, labeling occurred in a gentle manner under classical cell culture conditions reducing cellular stress responses. Staining procedures were monitored by fluorescence microscopy and it was observed that sphingolipids and cholesterol containing free hydroxyl groups exhibit a decreased distribution velocity as well as a longer persistence in the plasma membrane compared to lipids without hydroxyl groups like phospholipids or other artificial lipid analogs. After membrane staining, the fluorescent molecules were sorted into membranes of cell organelles according to their chemical properties and biological functions without any influence of the delivery system.     

Inverse-phosphocholine lipids: a remix of a common phospholipid

Zwitterionic inverse-phosphocholine (iPC) lipids contain headgroups with an inverted charge orientation relative to phosphocholine (PC) lipids. The iPC lipid headgroup has a quaternary amine adjacent to the bilayer interface and a phosphate that extends into the aqueous phase. Neutral iPC lipids with ethylated phosphate groups (CPe) and anionic iPC lipids nonethylated phosphate groups (CP) were synthesized. The surface potential of CPe liposomes remains negative across a broad pH range and in the presence of up to 10 mM Ca(2+). CP liposomes aggregate in the presence of Ca(2+), but at a slower rate than other anionic lipids. Hydrolysis of CP lipids by alkaline phosphatases generates a cationic lipid. CPe liposomes release encapsulated anionic carboxyfluorescein (CF) 20 times faster than PC liposomes and release uncharged glucose twice as fast as PC liposomes. As such, iPC lipids afford a unique opportunity to investigate the biophysical and bioactivity-related ramifications of a charge inversion at the bilayer surface.     

Langmuir-Blodgett films of fluorinated glycolipids and polymerizable lipids and their phase separating behavior

This paper describes the phase separating behavior of Langmuir monolayers from mixtures of different lipids that (i) either carry already a glycopeptide recognition site or can be easily modified to carry one and (ii) polymerizable lipids. To ensure demixing during compression, we used fluorinated lipids for the biological headgroups and hydrocarbon based lipids as polymerizable lipids. As a representative for a lipid monomer, which can be polymerized in the hydrophilic headgroup, a methacrylic monomer was used. As a monomer, which can be polymerized in the hydrophobic tail, a lipid with a diacetylene unit was used (pentacosadiynoic acid, PDA). The fluorinated lipids were on the one hand a perfluorinated lipid with three chains and on the other hand a partially fluorinated lipid with a T(N)-antigen headgroup. The macroscopic phase separation was observed by Brewster angle microscopy, whereas the phase separation on the nanoscale level was observed by atomic force microscopy. It turned out that all lipid mixtures showed (at least) a partial miscibility of the hydrocarbon compounds in the fluorinated compounds. This is positive for pattern formation, as it allows the formation of small demixed 2D patterned structures during crystallization from the homogeneous phase. For miscibility especially a liquid analogue phase proved to be advantageous. As lipid 3 with three fluorinated lipid chains (very stable monolayer) is miscible with the polymerizable lipids 1 and 2, it was mostly used for further investigations. For all three lipid mixtures, a phase separation on both the micrometer and the nanometer level was observed. The size of the crystalline domains could be controlled not only by varying the surface pressure but also by varying the molar composition of the mixtures. Furthermore, we showed that the binary mixture can be stabilized via UV polymerization. After polymerization and subsequent expansion of the barriers, the locked-in polymerized structures are stable even at low surface pressures (10 mN/m), where the unpolymerized mixture did not show any segregation.     

Influence of lipid composition on membrane activity of antimicrobial phenylene ethynylene oligomers

Host defense peptides (HDPs), part of the innate immune system, selectively target the membranes of bacterial cells over that of host cells. As a result, their antimicrobial properties have been under intense study. Their selectivity strongly depends on the chemical and mostly structural properties of the lipids that make up different cell membranes. The ability to synthesize HDP mimics has recently been demonstrated. To better understand how these HDP mimics interact with bilayer membranes, three homologous antimicrobial oligomers (AMOs) 1-3 with an m-phenylene ethynylene backbone and alkyl amine side chains were studied. Among them, AMO 1 is nonactive, AMO 2 is specifically active, and AMO 3 is nonspecifically active against bacteria over human red blood cells, a standard model for mammalian cells. The interactions of these three AMOs with liposomes having different lipid compositions are characterized in detail using a fluorescent dye leakage assay. AMO 2 and AMO 3 caused more leakage than AMO 1 from bacteria membrane mimic liposomes composed of PE/PG lipids. The use of E. coli lipid vesicles gave the same results. Further changes of the lipid compositions revealed that AMO 2 has selectively higher affinity toward PE/PG and E. coli lipids than PC, PC/PG or PC/PS lipids, the major components of mammalian cell membranes. In contrast, AMO 3 is devoid of this lipid selectivity and interacts with all liposomes with equal ease; AMO 1 remains inactive. These observations suggest that lipid type and structure are more important in determining membrane selectivity than lipid headgroup charges for this series of HDP mimics.     

Structure and properties of complexes of polycationic brushes with anionic liposomes

The adsorption of anionic lipid vesicles (liposomes) on the surfaces of colloidal particles containing grafted polycationic chains (cationic brushes) is studied. The stability of liposome-brush complexes in aqueous salt solutions increases with the content of anionic lipid in the liposomal membrane; complexes with liposomes containing 20 and 30 mol% anionic lipids do not dissociate into individual components in a 1.2 M NaCl solution. The integrity of the brush-bound liposomes is preserved. The developed approach can be used to obtain nanosized carriers for biologically active compounds.     

Fluorescence behavior of the pH-sensitive probe carboxy SNARF-1 in suspension of liposomes.

When exposed to the intracellular environment fluorescent probes sensitive to pH exhibit changes of photophysical characteristics as a result of an interaction of the dye molecule with cell constituents such as proteins, lipids or nucleic acids. This effect is reflected in calibration curves different from those found with the same dye in pure buffer solutions. To study an interaction of the probe 5'(and 6')-carboxy-10-dimethylamino-3-hydroxy- spiro[7H-benzo[c]xanthene-7,1'(3H)-isobenzofuran]-3'-one (carboxy SNARF-1) with membrane lipids, we measured its fluorescence in model systems of large unilamellar vesicles (LUV) prepared by extrusion. When the dye was removed from the bulk solution by gel filtration the relative fluorescence intensity of the lipid-bound dye form was enhanced, showing a strong interaction of the dye molecule with LUV membrane lipids. Surprisingly, the dye molecules seem to be bound predominantly to the outer surface of the lipid bilayer. The same situation was found with small unilamellar vesicles prepared by sonication. This effect makes it difficult to use carboxy SNARF-1 for measurements of the internal pH in suspensions of liposomes.     

Calcium ion fluorescence detection using liposomes containing Alexa-labeled calmodulin

This paper describes the preparation and characterization of calcium ion sensitive fluorescent liposomes and their application for the determination of calcium ions in aqueous samples. Calmodulin (CaM), a calcium ion-binding protein labeled with the fluorophore Alexa-488 is embedded in the membrane of unilamellar liposomes. Upon calcium ion binding, calmodulin undergoes a conformational change that exposes its hydrophobic core and affects the fluorescence intensity of the attached fluorophore. Characterization studies of Alexa-CaM-containing liposomes reveal that embedding calmodulin molecules in the bilayer membrane of liposomes extends the lifetime of the calcium ion binding activity of calmodulin by about fourfold compared to the lifetime of its calcium-binding activity in free solution. Moreover, the calcium ion response of Alexa-CaM-containing liposomes is about threefold higher than the calcium ion response of Alexa-CaM in solution. The improvement in the calcium ion detection properties is attributed to the interaction between calmodulin, a membranal protein, and the hydrophobic phospholipids of the liposomes. The analytical properties of the calcium ion sensitive fluorescent liposomes are discussed.     

Ligand-induced reorganization and assembly in synthetic lipid membranes

Membrane targetting of soluble ligands accompanied by assembly of membrane components into functional superstructures underlies biological signal transduction and a variety of other processes ranging from blood coagulation to biomineralization. Protein or lipid components provide the interactions required for targetting and specific orientation of bound molecules; the membrane's fluidity allows reorganization and sampling of intermolecular contacts required for assembly into superstructures. We are developing synthetic membrane-based recognition systems capable of reproducing important features of biological targetting and assembly. Systems such as these may open up new routes to controlling molecular architecture in materials and devices. Specially designed metal-chelating receptor/reporter lipids have been used to study lipid reorganization induced by binding of metal-complexing ligands. Proteins and peptides are targetted to the Cu²⁺- and Ni²⁺-complexing lipids via coordination interactions with surface histidines. Binding and assembly of multivalent ligands are accompanied by reorganization of the lipid receptors, as measured by fluorescence spectroscopy and fluorescence microscopy. Coordination interactions between protein and chelating lipid components can be used for direct assembly into superstructures such as patterned lipid monolayers and two-dimensional protein crystals.     

可聚合脂质体的研究 Ⅳ含丙烯酰基的类脂分子及其与亲水性丙烯酰单体的共聚物

可聚合脂质体的研究Ⅳ含丙烯酰基的类脂分子及其与亲水性丙烯酰单体的共聚物金威曲青蓝李子臣李福绵（北京大学化学与分子工程学院北京１００８７１）关键词可聚合类脂分子，共聚合，自组织，脂质体脂质体因其优异的生物相容性做为药物释放材料而备受瞩目．一般说来，...     

Liposome formation of selectively-polymerized diene-containing phospholipids and their postpolymerization

Small and large unilamellar liposomes composed of 1,2-bis(2,4-octadecadienoyl)-sn-glycero-3-phosphorylcholine (DODPC) are prepared by sonication and extrusion, respectively. They are polymerized with water-insoluble radical initiator, azobis(isobutyronitrile) (AIBN) which can selectively polymerize diene groups in 1-acyl chains of the lipids. Polymerized liposomes are freeze-dried to obtain the polymerized liposome powder. There are two methods to redisperse lyophilized liposomes into water. The extrusion is an effective method to disperse them because the energy at extrusion is necessary only for redispersion, whereas the excess energy at sonication gives damage on liposome structure. There is no difference in stability between polymerized liposomes before and after redispersion with extrusion. DODPC polymers, obtained from free radical-initiated polymerization with AIBN, are linear and have polymerizable diene groups in 2-acyl chains. The liposome powder is therefore soluble in organic solvents. Reconstruction of polymerized liposomes is performed with lipid polymers having low or high molecular weight. The lipid polymers having high molecular weight provide stable large unilamellar liposomes by ethanol injection, but unstable small unilamellar liposomes are formed by sonication. The liposomes reconstructed from lipid polymers having low molecular weight are unstable regardless of their size. After reconstruction of liposomes selectively polymerized by AIBN, diene groups in 2-acyl chains are polymerized by water-soluble radical initiator or UV-irradiation to yield highly crosslinked structure. Their stability is improved remarkably by this postpolymerization.     

Effect of lipid composition on phospholipase A2-catalyzed membrane leakage in immobilized liposomes: sensitization for polychlorinated biphenyls detection with antibody affinity column tandem with fluorescent liposome column

Phospholipase A(2) (PLA(2))-catalyzed membrane leakage can be detected by immobilized liposomes containing a self-quenching fluorescent dye, calcein, on an open column using off-line analysis with a fluorescent spectrophotometer. The calcein release was found to be affected by the pH value, incubation time, and liposome compositions. The fluorescent signal from the negatively charged liposomes hydrolyzed by PLA(2) was 5 times higher than that from neutral liposomes. We utilized this enzymatic reaction to amplify signal to detect polychlorinated biphenyls (PCBs). To achieve this goal, we conjugated an analogue of PCB, 3,4-dichloroaniline, to PLA(2). The competitive immunoreaction between the 3,4-dichloroaniline-PLA(2) conjugate and PCB samples on the anti-PCB antibody column caused the release of the bound PLA(2) conjugates in proportion to the PCB concentration. The released PLA(2) conjugates was then passed through the tandem fluorescent liposome column causing release of fluorescent dye from the liposomes. Therefore, the signal of immunocompetitive assay was amplified on the fluorescent liposome column. The tandem column system achieves a high sensitivity by detecting the PCB concentration as low as 0.5 ng/mL in less than 20 min. It has great potential in detecting other pollutants, and has been used for sensitive immunoassays.