Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

Synthesis of new aromatic polyamides containing α-amino phosphonate with high thermal stability and low heat release rate

The new aromatic polyamides containing α-amino phosphonate were synthesized from phosphorus-based dicarboxylic acid 4 and various aromatic diamines by direct polycondensation reaction. Dicarboxylic acid 4 was successfully synthesized from trimethyl phosphite, 4-aminobenzoic acid and terephthaldehyde via a three-component reaction. The polymerization reaction produced the polyamides 6a–f with high yield and desirable inherent viscosities. The thermal properties of the all samples were investigated by thermo-gravimetric analysis (TGA). The TGA results in N₂ exhibited the 10% mass loss temperatures (T₁₀) in the ranges of 324–345 °C, while the T₁₀ resulted from thermo-oxidative degradation were higher than those. The main data obtained by microscale combustion calorimetry revealed acceptable combustion properties such as very low peak of heat release rate for the synthesized polyamides 6a–f. The all of the results indicated that these polyamides can be potentially utilized as additive for improvement of thermal resistance and combustion behavior of thermoplastic materials.

     

Effect of aluminum diethylphosphinate on flame retardant and thermal properties of rigid polyurethane foam composites

Rigid polyurethane foam/aluminum diethylphosphinate (RUPF/ADP) composites were prepared by one-step water-blown method. Furthermore, scanning electron microscope (SEM), thermal conductivity meter, thermogravimetric analysis (TGA), limiting oxygen index, Underwriters Laboratories vertical burning test (UL-94) and microsacle combustion calorimetry were applied to investigate thermal conductivity, thermal stability, flame retardancy and combustion behavior of RPUF/ADP composites. Thermogravimetric analysis–Fourier transform infrared spectroscopy (TG–FTIR) was introduced to investigate gaseous products in degradation process of RPUF/ADP composites, while SEM and X-ray photoelectron spectroscopy were used to research char residue of the composites. It was confirmed that RPUF/ADP composites presented well cell structure with density of 53.1–59.0 kg m^?3 and thermal conductivity of 0.0425–0.0468 W m^?1 K^?1, indicating excellent insulation performance of the composites. Flame retardant test showed that ADP significantly enhanced flame retardancy of RPUF/ADP composites, RPUF/ADP30 passed UL-94 V-1 rating with LOI of 23.0 vol%. MCC test showed that ADP could significantly decrease peak of heat release rate (PHPR) of RPUF/ADP composites. PHPR value of RPUF/ADP20 was decreased to 158 W g^?1, which was 21.8% reduced compared with that of pure RPUF. TG–FTIR test revealed that the addition of ADP promoted the release of CO₂, hydrocarbons and isocyanate compound in first-step degradation of RPUF matrix while inhibited the release of CO in second step degradation. Char residue analysis showed that the addition of ADP promoted polyurethane molecular chain to form aromatic and aromatic heterocyclic structure, enhancing strength and compactness of the char. This work associated a gas–solid flame retardancy mechanism with the incorporation of ADP, which presented an effective strategy for preparation of flame retardant RPUF composites.

     

Hydrolytic degradation of polyester–polyether block copolymer based on polycaprolactone/poly(ethylene glycol)/polylactide

Polyester–polyether block copolymers based on polycaprolactone/poly(ethylene glycol)/polylactide (PCEL) with various compositions were synthesized by direct copolymerization of ϵ‐caprolactone, L ‐lactide and PEG (6000) in the presence of stannous octoate at 130 °C for 56 hr. The degradation behavior of the copolymers was investigated in a pH 7.4 phosphate buffer solution at 37 ±1 °C. Various techniques such as weight, gel permeation chromatography, ¹H nuclear magnetic resonance, differential scanning calorimetry and X‐ray diffractometry were used to monitor the changes in water absorption, weight loss, molar mass, molar mass distribution, thermal properties and compositions. The results show that the hydrophilicity of copolymer was enhanced with increasing poly(ethylene oxide) content, which led to the PEG sequences fast release and an increase in weight loss of the copolymer. Bimodal chromatograms were detected in the degradation, which were attributed to the degradation mechanism of the partial crystalline polymer proceeding predominantly in amorphous zones. Copyright © 2000 John Wiley & Sons, Ltd.     

Validated Stability-Indicating Chromatographic Method for the Assay of Erlotinib Active Pharmaceutical Ingredient

Abstract

A simple stability-indicating high-performance liquid-chromatographic (HPLC) method for the assay of erlotinib in the presence of its degradation products was developed on a C18 column using a mobile phase of 0.01 M ammonium formate–acetonitrile–containing formic acid with a flow rate of 1.0 mL min^?1. The method was validated. Selectivity was validated by subjecting the stock solution of erlotinib to acidic, basic, photolysis, oxidative, and thermal degradation. The linearity range and values for limits of detection (LOD) and quantification (LOQ) were found to be 1–198, 0.33, and 1.1 µg mL^?1, respectively. The analysis of the tablets containing erlotinib was quite precise (relative standard deviation <1%).     

Structure–activity relationship of thermal interaction between arylmalonamide[70]fullerocyclopropane stabilizer and nitrocellulose

The thermal decomposition or even explosion of nitrocellulose during long-term storage is prevented by adding stabilizers to nitrocellulose-based propellants. A series of novel arylmalonamide[70]fullerocyclopropane (3a–c) were synthesized through Bingel reaction. The molecular structures of 3a–c were verified through ¹H NMR, ¹³C NMR, Fourier transform infrared spectroscopy (FT-IR), UV–visible spectroscopy, and mass spectrum. The thermal stability of 3a–c to nitrocellulose was studied by methyl violet paper test and iso-thermogravimetry method, and the results showed that the stability of 3a–c to nitrocellulose was significantly better than that of the [60]fullerene-based stabilizers. The thermal stability of 3a–c to nitrocellulose improved as the increase of the carbon chain length on the p-position of the benzene ring. The effects of 3a–c on the thermal decomposition of nitrocellulose were obtained by differential thermal analysis, and the results showed that the critical temperature of the thermal explosion of nitrocellulose can be increased by 0.1–2.8 °C by 3a–c. The thermal stability of 3a–c to nitrocellulose in adiabatic environment was confirmed by accelerating rate calorimetry. In addition, the stabilization mechanism was studied through ESR and FT-IR, and the results showed that 3a–c can react with nitrogen oxide radicals released by nitrocellulose. These arylmalonamide[70]fullerocyclopropane with excellent thermal stability and strong radical scavenging ability can be used as a promising stabilizer for single and double based propellants.

     

Phase transformation in a nanostructured M300 maraging steel obtained by SPS of mechanically alloyed powders

New complexes of type [Cu(HTBG)₂]Cl₂ (1), [Cu(TBG)₂]·3H₂O (2) and [CuL]·nH₂O (3) L:L¹, n = 2 and (4) L:L², n = 1 (HTBG: 2-tolylbiguanide, L¹ and L²: ligands resulted from 2-tolylbiguanide, ammonia/hydrazine and formaldehyde one pot condensation) were synthesised and characterised. The features of complexes have been assigned from microanalytical, IR and UV–Vis data. Redox behaviour was established by cyclic voltammetry. The in vitro qualitative and quantitative antimicrobial activity assays showed that the complexes exhibited variable antimicrobial activity against Gram-negative and Gram-positive strains isolated from the hospital environment. The thermal analyses have evidenced the thermal intervals of stability and also the thermodynamic effects that accompany them. After water elimination, complexes have a similar thermal behaviour. Processes as water elimination, melting, chloride anion removal as well as oxidative degradation of the organic ligands were observed. The final product of decomposition was copper (II) oxide.     

Ames Mutagenicity Tests of Three Acetanilide Herbicides During Their Alkaline Degradation

Abstract

Three acetanilide herbicides—propanil, propachlor and pronamide—were studied for alkaline degradation using the HPLC technique and found to be relatively stable for chemical degradation with the highest hydrolysis rate for pronamide (k _b = 0.4966 M^?1 hr^?1), followed by propachlor (k_b = 0.1466 M^?1 hr^?1) and propanil k_b = 0.0154 M^?1 hr^?1). Simultaneously, the Ames mutagenicity test for non-degraded and half-degraded acetanilides have been performed. Testing two types of samples (primary chemicals and mixtures of half-degraded primary chemicals with their degradation products, both in 10%-acetonitrile buffer; the ranges of concentrations were 2–400 mg l^?1 for propanil and propachlor and 2–50 mg l^?1 (for pronamide) have shown the increase in mutagenicity for propanil, the decrease for propachlor and almost the same dose-response curve for pronamide during their degradation. The preliminary results of the research indicate that some environmental problems related to the impact of pesticide degradation products can appear, not only to a pesticide itself.     

Electrical,Mechanical, and Thermal Properties of Poly(4,4′-Cyclohexylidene Diphenylene-m-Benzene/Toluene-2,4-Disulfonate)

Abstract

The films of poly(4,4′-cyclohexylidene diphenylene-m-benzene disulfonate) (PSBB, 0.610 mm thick) and poly(4,4′-cyclohexylidene diphenylene-toluene-2,4-disulfonate) (PSBT, 0.537 mm thick) showed 8.23 ± 0.25 and 9.6 ± 0.245 kV, respectively, as the dielectric breakdown voltage (ac) in air at room temperature. The same films have 8.8 × 10¹¹ and 7.2 × 10¹⁴ ω°Cm volume resistivity. PSBB (40 μm thick) and PSBT (50 μm thick) films have tensile strengths of 1971 and 1677 kg/cm² and percent elongations of 1.3 and 1.2, respectively. The static hardnesses of PSBB (0.178 mm thick) and PSBT (0.190 mm thick) at three different loads (15–60 g) are 12.8–15.5 and 14.5–16.5 kg/mm², respectively. PSBB and PSBT are thermally stable up to about 355°C in an N₂ atmosphere and involve two-step degradation. DSC and DTA showed T _g at about 125–127 and 138–142°C, respectively, for PSBB and PSBT in N₂. PSBB and PSBT have comparable breakdown voltages and volume resistivity with some useful plastics whereas they have superior T _g and thermal stability with retention of excellent solubility in common solvents over polysulfonates without a cardo group. Thus, the cardo (cyclo-hexyl) group has enhanced thermal and mechanical properties with excellent solubility and easy processing.     

Syntheses and characterization of new MnII and FeII complexes with 4′-(4-pyridyl)-2,2′ : 6′,2″-terpyridine (pyterpy), [Mn(pyterpy)(MeOH)2(OAc)](ClO4) and [Fe(pyterpy)2](SCN)2 · MeOH

Two new Mn^II and Fe^II complexes with 4′-(4-pyridyl)-2,2′ : 6′,2″-terpyridine (pyterpy), [Mn(pyterpy)(MeOH)₂(OAc)](ClO₄) (1) and [Fe(pyterpy)₂](SCN)₂ · MeOH (2) have been synthesized and characterized by CHN elemental analysis, IR spectroscopy, and structurally analyzed by single-crystal X-ray diffraction. The thermal stabilities of these compounds were studied by thermal gravimetric (TG) and differential thermal analyses (DTA). The potentially tetradentate pyterpy ligand is a tridentate donor to both Mn(II) and Fe(II). The non-coordinated pyridyl interacts via O–H ··· N and C–H ··· N hydrogen bonds with adjacent molecules in 1 and 2, respectively, to form inversion symmetric dimers. Compound 1 is further extended into infinite hydrogen bonded chains via pairs of O–H ··· O_acetate hydrogen bonds.     

Kinetics of thermal depolymerization of trimethylsiloxy end-blocked polydimethylsiloxane and polydimethylsiloxane-N-phenylsilazane copolymer

The thermal degradation of Me₃SiO end-blocked polydimethylsiloxane (eb-PDMS) and polydimethylsiloxane-N-phenylsilazane (eb-PDMS–NPhSz) copolymer was studied. For both polymers relative degree of polymerization (DP /DP ₀) as a function of conversion (1 – W/W₀) data were obtained. For eb-PDMS the results were consistent with a mechanism involving a rate determining random siloxane bond cleavage initiation step followed by a rapid and complete depropagation of the active fragments evolving volatile cyclic oligomers. Rate constants (k) for initiation were obtained at four temperatures from plots of DP ^?1 vs. time. An Arrhenius activation energy of approximately 80 kcal/mol was determined and is consistent with a SiOSi scission transition state. The degradation of eb-PDMS–NPhSz appears to follow the same depolymerization process evolving cyclic oligomers. Although DP /DP ₀ vs. C data suggest a random cleavage–complete depolymerization mechanism, an Arrhenius plot suggests a more complex degradation mechanism. The role of impurities as degradation catalysts is discussed.     

Degradation of Phosphorylated Poly(N-Vinylcarbazole) by Thermogravimetry ‡

Abstract

The thermal degradation of phosphorylated poly(N-vinylcarbazole) was studied by thermogravimetry. The onset degradation temperature decreases with respect to that of unmodified poly(N-vinylcarbazole), indicating a lower thermal stability for the phosphorylated sample. The activation energy values for the degradation process were calculated from the thermograms by treating it as a kinetic analysis; these values are smaller than those for unmodified samples and depend on molecular weight, phosphorous contents, and heating rate.     

Monooxovanadium(V) 2-phenylphenoxides: synthesis,characterization, and antimicrobial potential

Monooxovanadium(V) complexes of the composition VOCl_{3? n} (L) _n (where L = 2-phenylphenoxide ion; n = 1–3) (1–3) have been synthesized in quantitative yields by the reaction of VOCl₃ with 2-phenylphenol in toluene. The characterization of the complexes has been accomplished by elemental analysis, molar conductance measurements, IR, ¹H-NMR, electronic, mass spectral, and thermal studies. The ligands as well as the complexes have been screened for their in vitro antimicrobial activity against the pathogenic bacteria Escherichia coli and Staphylococcus aureus and fungi Candida albicans, Aspergillus niger, and Fusarium oxysporum by a twofold serial dilution. An increase in the biocidal activity was observed for the vanadium complexes. The minimum inhibitory concentration (MIC) values were 6.25–25 µg mL^?1 for complexes, relative to that of the free ligand of 25–50 µg mL^?1.     

Two multifunctional organic-inorganic hybrid complexes based on polyoxometalates,BiEDTA and sodium linker: crystal structures,photochromic, and catalytic performances

Two 3-D organic–inorganic hybrid supermolecular complexes, Na(BiHEDTA·2H₂O)₃(PW₁₂O₄₀)·2H₃O (BiPW) and Na(BiHEDTA·2H₂O)₃(PMo₁₂O₄₀)·2H₃O·2H₂O (BiPMo) ethylenediamine tetraacetic acid (EDTA) have been synthesized by solution method and characterized by ultraviolet visible (UV–vis) spectroscopy, thermogravimetric-differential thermal analysis, photoluminescence, cyclic voltammetry, and single-crystal X-ray diffraction (XRD). XRD analysis reveals that BiPW and BiPMo are isostructural with 3-D architectures assembled by 2-D layer tetranuclear cation and a Keggin-type polyoxoanion. Although these two hybrids exhibit similar structures, the properties depend on the nature of polyoxoanion [PM₁₂O₄₀]^3? (M = W, Mo). Under UV irradiation, BiPW and BiPMo show fast response of reversible and irreversible photochromism, respectively. BiPW exhibits excellent photocatalytic activity in degradation of methyl orange dyes under irradiation of UV–visible light. It can be reused for at least six cycles without obvious loss of activity in the degradation experiments; BiPMo shows catalytic activity in elimination of methanol. The elimination rate of methanol reaches 56.9% when the concentration of methanol is 2.3 g·m^?3 and the flow velocity is 10 mL·min^?1 at 100 °C.     

Thermal properties and flame retardancy of novel epoxy based on phosphorus‐modified Schiff‐base

Through addition reaction of Schiff‐base terephthalylidene‐bis‐(p‐aminophenol) ( DP‐1 ) and diethyl phosphite (DEP), a novel phosphorus‐modified epoxy, 4,4'‐diglycidyl‐(terephthalylidene‐bis‐(p‐aminophenol))diphosphonate ether ( EP‐2 ), was obtained. An modification reaction between EP‐2 and DP‐1 resulted in an epoxy compound, EP‐3 , possessing both phosphonate groups and C?N imine groups. The structure of EP‐2 was characterized by Fourier transform infrared (FTIR), elemental analysis (EA), ¹H, ¹³C, and ³¹P NMR analyses. The thermal properties of phosphorus‐modified epoxies cured with 4,4'‐diaminodiphenylmethane (MDA) and 4,4'‐diaminodiphenyl ether (DDE) were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The activation energies of dynamic thermal degradation (E_d) were calculated using Kissinger and Ozawa's methods. The thermal degradation mechanism was characterized using thermogravimetric analysis/infrared spectrometry (TG‐IR). In addition, the flame retardancy of phosphorus‐modified epoxy thermosets was evaluated using limiting oxygen index (LOI) and UL‐94 vertical test methods. Via an ingenious design, phosphonate groups were successfully introduced into the backbone of the epoxies; the flame retardancy of phosphorus‐modified epoxy thermosets was distinctly improved. Due to incorporation of C?N imine group, the phosphorus‐modified epoxy thermosets exhibited high thermal stabilities; the values of glass‐transition temperatures (T_gs) were about 201–210°C, the values of E_d were about 220–490 kJ/mol and char yields at 700°C were 49–53% in nitrogen and 45–50% in air. These results showed an improvement in the thermal properties of phosphorus‐modified epoxy by the incorporation of C?N imine groups. Copyright © 2010 John Wiley & Sons, Ltd.     

Fluorine-substituted β-diketonate PbII complexes, [Pb(phen)(TFPB)2] and [Pb(2,2′-bipy)(TFPB)2]

Lead(II) 4,4,4-trifluoro-1-phenyl-1,3-butandionate (TFPB^?) complexes with 1,10-phenanthroline (phen) and 2,2′-bipyridine (2,2′-bipy), [Pb(L)(TFPB)₂], have been synthesized and characterized by elemental analysis, IR-, ¹H NMR spectroscopy and studied by X-ray crystallography. The self-assembly of [Pb(L)(TFPB)₂] complexes, (L?=?phen or 2,2′-bipy) is caused by C–H?···?F–C, C–H?···?O–C and π–π stacking interactions. The thermal stabilities of compounds were studied by thermal gravimetric (TG) and differential thermal analyses (DTA).     

Thermal properties of [MII(phen)3]2V4O12·phen·22H2O (M II=Co,Ni, Cu,phen=1,10-phenanthroline)

Thermal decomposition of three tetravanadates, [M^II(phen)₃]₂V₄O₁₂·phen·22H₂O, where M ^II is Co (1), Ni (2), Cu (3) and phen is 1,10-phenanthroline, was studied by dynamic method (for 1 and 2) or isothermally (for 3). The thermal decomposition of the studied compounds is a multi-step process which involve: discontinuous dehydration, release of uncoordinated, and of coordinated phenanthroline molecules. In course of the latter process, a phase transition of the cyclo-tetravanadates to polymeric metavanadates occurred. Metavanadates with chain structure of the anion were the final decomposition products of all tetravanadates studied. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation,Mechanical Properties and Thermal Degradation Kinetics of a Novel Poly(ester-ether-imide) Elastomer Based on N′,N-Bis(2-hydroxyethyl)-Pyromellitimide Unit

A novel poly(ester-ether-imide) (PEEI) based on N′,N-bis(2-hydroxyethyl)-pyromellitimide unit was synthesized via a conventional two-stage procedure with 1,4-butanediol (BD), dimethyl terephthalate (DMT) and poly(tetramethylene glycol) (PTMG1000). The structures of imide dihydric alcohol and PEEI were confirmed by FT-IR and ¹H-NMR spectra, respectively. The thermal properties and mechanical properties were investigated. The results show PEEI possesses good mechanical properties and excellent thermal stability with the 5% weight loss temperature of the PEEI at 367.3°C, and melting temperature of hard segments (T_mh) at 209.7°C. In addition, the kinetic parameters of thermal degradation of the PEEI were studied by thermogravimetric analysis (TGA) at different heating rates. The activation energy of the solid-state process was determined to be 174.83 and 175.83 kJ/mol using Kissinger and Flynn–Wall–Ozawa methods, respectively. The degradation mechanism model of PEEI was determined bythe Coats-Redfern method. Compared with the values obtained from the Kissinger and Flynn–Wall–Ozawa methods, the actual reaction mechanism of the novel PEEI is a F₁ type (Random nucleation with one nucleus on the individual particle nucleation) and growth model with integral g(a)=?ln(1?a)).     

Copper(II) and molybdenum(VI) complexes with 5-bromosalicylaldehyde S-allylisothiosemicarbazone: Syntheses,characterizations and crystal structures

A new tridentate Schiff base, 5-bromosalicylaldehyde S-allylisothiosemicarbazone hydrobromide (H₂L), and several new mononuclear complexes of copper(II) and molybdenum(VI) of this ligand with general formulas ([Cu(L)Im] (1)), ([Cu(L)NH₃]·4H₂O (2)), and ([MoO₂(L)1-MeIm] (3), Imidazole: Im, 1-methylimidazole: 1-MeIm) were prepared and characterized by elemental analyses, IR, proton magnetic resonance Spectroscopy, and ultraviolet–visible techniques. The physico-chemical results suggested that the H₂L coordinates in the dianionic tridentate form. Crystal structures of the Cu(II) complexes reveal a square planar configuration surrounded by the dianionic tridentate isothiosemicarbazone (ONN) and Im and NH₃ for 1 and 2, respectively. The L^2-, two oxo, and 1-methylimidazole are coordinated to molybdenum(VI) in a distorted octahedral geometry in 3. Formation of pure metal oxide residues was confirmed by thermal degradation of the complexes.     

Synthesis and mesomorphism of ether–ester mixed tail C3-symmetrical truxene discotic liquid crystals

Truxene discotic liquid crystals are interesting for their polymesomorphism and as organic semiconductor candidates. We developed an efficient synthetic method for C₃-symmetrical truxene derivative 2,7,12-trihydroxy-3,8,13-trimethoxytruxene 5, and further a series of ether–ester mixed tail truxene discogens HTn, TR(OMe)₃[OOCC₆H₂(OC_nH_2n+1)₃]₃ were prepared. The truxene discogens HTn (n?=?4–8, 10, 12) were characterised by using ¹H and ¹³C nuclear magnetic resonance, and high-resolution mass spectrometry. Their thermal stability was studied with thermal gravimetric analysis and their liquid crystal properties were investigated by using polarising optical microscopy, differential scanning calorimetry and X-ray diffraction. They exhibit a hexagonal columnar (Col_h) mesophase in fairly wide temperature ranges.