Thermally conductive and electrically insulative nanocomposites based on hyperbranched epoxy and nano‐Al2O3 particles modified epoxy resin

Novel epoxy nanocomposites based on a diglycidyl ether of bisphenol A (DGEBA) epoxy, an epoxy functionalized hyperbranched polymer (HTTE) and nano‐Al₂O₃ were synthesized with the aim of determining the effect of the nano‐Al₂O₃ particles and HTTE on the structure and properties of epoxy nanocomposites. The mechanical properties, thermal conductivity, bulk resistivity, and thermal stability of the nano‐Al₂O₃/HTTE/DGEBA ternary composites were evaluated and compared with the corresponding matrix. The improvement in impact properties of these nanocomposites was explained in terms of fracture surface analysis by SEM. The results indicate that the incorporation of nanoparticles and hyperbranched epoxy effectively improved the toughness of epoxy composites without sacrificing thermal conductivity and bulk resistivity compared to the neat epoxy and Al₂O₃/DGEBA, obtaining a well dispersion of nanoparticles in epoxy matrix and solving the drawbacks for single fillers filled epoxy nanocomposite. Copyright © 2010 John Wiley & Sons, Ltd.     

Bio-based thermostable, biodegradable and biocompatible hyperbranched polyurethane/Ag nanocomposites with antimicrobial activity

The enhanced thermal and antimicrobial activity of silver nanoparticles prompts their uses in many medical devices. Mesua ferrea L. seed oil based antimicrobial biocompatible hyperbranched and linear polyurethane/Ag nanocomposites have been prepared in dimethylformamide without using any extra reducing agent. Formation of the stable and well-dispersed Ag nanoparticles was confirmed by ultra violet, X-ray diffractometeric, transmission electron microscopic and Fourier transform infra-red spectroscopic analyses. The enhancement of properties like thermal stability by (46-53)°C and 42 °C, tensile strength to ∼170% and ∼180% for hyperbranched and linear polyurethanes respectively was observed by the formation of nanocomposites. The cytocompatibility test based on the inhibition of RBC hemolysis showed that the materials lack cytotoxicity. The nanocomposites showed biodegradability as conferred from the bacterial degradation. Dose dependent excellent antibacterial activity of the nanocomposites against Gram positive (Staphylococcus aureus) and Gram negative (Escherichia coli) bacteria and antifouling activity against Candida albicans was observed.     

Polymer Nanocomposites Containing Fullerene C60 Nanofillers

Summary: The effect of fulleroids (fullerene C₆₀, mixture of C₆₀/C₇₀ and fulleroids soot which used for fullerenes production) and carbon fillers (carbon black, graphite) on mechanical properties of polymer nanocomposites based on reactoplasts (epoxy resins) and thermoplasts (polyamide-12) was investigated. The nanocomposites were prepared by in situ polymerization. It was found that additives of these fillers did not influenced on the properties of reactoplasts. Therefore, the tensile modulus and tensile strength of thermoplast based polymer nanocomposites are improved by about 30-40% with loading of 0.02-0.08 fulleroids materials. Best results were obtained for a mixture of C₆₀/C₇₀.     

Self-assembled fabrication and flame-retardant properties of reduced graphene oxide/waterborne polyurethane nanocomposites

The graphite oxide (GO) was prepared from expandable graphite by the pressurized oxidation method, and samples were characterized using XRD, UV–Vis, and TEM. GO is reduced in situ emulsion using hydrazine to achieve reduced graphene oxide/waterborne polyurethane (rGO/WPU) nanocomposites. The effect of rGO content on the stability, fracture morphologies, mechanical performance, thermal degradation, and flame-retardant properties of rGO/WPU composites was investigated by zeta potential analyzer, TEM, SEM, universal testing machine, TG, and Cone Calorimeter. The results of zeta potential, TEM, and SEM analysis indicate that rGO has a good stability and dispersibility in rGO/WPU nanocomposites. The results of mechanical tests showed that the mechanical properties of rGO/WPU nanocomposites increased consistently with increasing rGO content up to 2 mass%, and TG showed that the thermostability of rGO/WPU nanocomposites decreased slightly compared to pure WPU, but carbon residue increased from 0.99 to 1.99 % when the mass fraction of rGO in WPU is 2 %. Cone Calorimeter test indicated that the flame-retardant and smoke suppression properties of rGO/WPU composites showed significant improvement compared to the WPU alone. When the mass fraction of rGO is 1 %, the total smoke release and smoke factor decreased by 25 and 38 %, respectively, compared to those of pure WPU.     

Polymeric Nanocomposites—Polyhedral Oligomeric Silsesquioxanes (POSS) as Hybrid Nanofiller

Abstract

Polyhedral oligomeric silsesquioxane (POSS), a hybrid nanostructured macromer has been used in the last decade for preparation of polymeric nanocomposites. Its versatile chemistry, which lends it for almost infinite chemical modification, sets it apart from other nanostructured fillers like nanoclays, carbon nanotubes, and carbon nanofibers. Depending on its functionality, 3‐D network, bead or pendant type‐POSS based polymeric nanocomposites can be synthesized. These have the potential to be designed for products with specific nanostructures for specific end‐use applications. This article discusses the trends in current research involving use of POSS macromers for modification of mainly thermal and viscoelastic properties of various polymers.     

Hydrogen‐bonding,crystallinity, and morphological properties of poly(silicic acid)/waterborne polyurethane nanocomposites

Unique nanocomposites consisting of poly(silicic acid) nanoparticles (PNs) and waterborne polyurethane (WPU) were prepared. The aliphatic WPU prepared in this study was end‐capped with a silanol group, which could react with PNs via a sol–gel process. PNs were modified with phenyltrimethoxysilane (PTMS) and 3‐(trimethoxysilyl)propyl ester (TMPE) and then blended with WPU. The structure–property relationships were examined. Solid‐state ²⁹Si NMR spectra of WPU showed that structures T₁, T₂, and T₃ of WPU decreased and structures Q₃ and Q₄ of PN/WPU nanocomposites increased gradually. When the PN concentration increased to 10 wt %, PN/WPU nanocomposites exhibited the maximum fraction of hydrogen‐bonded carbonyl groups. In the PTMS–PN and TMPE–PN systems, the fraction of hydrogen‐bonded carbonyl groups fluctuated stably when the concentrations of PTMS–PN and TMPS–PN exceeded 5 wt %. The X‐ray diffraction results revealed that α‐form, γ‐form, or triclinic crystallization could be found in the WPU matrix. A differential scanning calorimetry spectrum showed that the crystalline structure of the hard segment of WPU was influenced by the nanoparticle concentration. The degrees of crystallinity were 88% for the PN/WPU nanocomposites, 41% for the PTMS–PN/WPU nanocomposites, and 54% for the TMPE–PN/WPU nanocomposites when the PN, PTMS–PN, and TMPE–PN concentrations were 5 wt %. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1076–1089, 2005     

Liquid crystalline polymers XVI*. Thermotropic liquid crystalline copoly(arylidene-ether)/TiO2 Nanocomposites: synthesis,characterisation and applications

ABSTRACT

Polymer nanocomposites are already a part of many important worldwide businesses. Among many nanocomposite precursors, titanium dioxide (TiO₂) nanopowder is increasingly being investigated due to its special properties. In this work, the feasibility of synthesising a new series of materials, copoly(arylidene-ether)/titanium dioxide nanocomposites, using in-situ copolymerisation technique has been investigated. This can be performed by the interaction of both cyclohexanone and 4-tert-butylcyclohexanone monomers with 4,4′-diformyl-2,2′-dimethoxy-α,ω-diphenoxyalkanes Ia–e, respectively, using different additions of titanium dioxide-P25. The structure of the prepared nanocomposites IIa–e/TiO₂ (0.2–3.0%) was confirmed by elemental analysis (energy dispersive X-ray spectroscopy) and spectral data (Fourier transform-infrared [FT-IR]). FT-IR verified the dispersion of nanofillers in the copolymer. Then, the characterisation and applications of these nanocomposites are extensively discussed depending on the investigation of how the addition of titanium dioxide nanoparticles affected on their properties using various techniques, such as X-ray diffraction, SEM, transmission electron microscopy, Water Contact Angle (WCA), thermogravimetric analysis, differential thermogravimetric, differential thermal analysis (DTA), polarising optical microscope and UV–vis absorption spectroscopy. The nanoparticles affected on the copolymer thermal behaviour in different ways (discrepancy results) depending on how these nanoparticles are dispersed in the copolymer matrix. UV–vis absorption spectra displayed a decrease in the optical band gap of some nanocomposites, which resulted from the addition of titanium dioxide to these copolymers, and this can improve the efficiency of them as organic emitting materials.     

水性聚氨酯及其接枝共聚物分散液颗粒的形态研究

通过自乳化法合成了水性聚氨酯 ,并用甲基丙烯酸甲酯对其进行了接枝共聚 .用动态光散射对其胶束粒径进行了测量 ,并用透射电镜对胶束的粒子形态进行了观察 ,研究结果表明 ,胶束粒子的粒径与聚氨酯结构中的二元醇组成有密切的关系 ,亲水性二元醇合成的聚氨酯胶束粒径比疏水性二元醇合成的要大 ;随聚丙二醇含量增多 ,接枝共聚反应更易进行 ,且接枝后的胶束粒径比接枝前增大 ,但随丙二醇含量增加 ,接枝共聚反应难以进行 ,且胶束粒径接枝前后变化不大 ,并有减小的趋势 ;随聚氨酯分子侧链的柔顺性增加 ,主链的刚性增强 ,胶束粒子易发生微相分离 ,形成壳 核结构     

Bio‐based hyperbranched polyurethane/clay nanocomposites: adhesive,mechanical, and thermal properties

The unison of vegetable oil‐based hyperbranched polymers with nanotechnology can unhook myriad of avant‐garde applications of such materials. Thus Mesua ferrea L. seed oil‐based hyperbranched polyurethane (HBPU)/clay nanocomposites and their performance, with special reference to adhesive strength, are reported for the first time. The nanocomposites of the hyperbranched polyurethane with organically modified nanoclay were obtained by ex situ solution technique and cured by bisphenol‐A‐based epoxy with poly(amido amine) hardener system. The partially exfoliated and well‐distributed structure of nanoclay was confirmed by XRD, SEM, and TEM studies. FTIR spectra indicate the presence of H‐bonding between nanoclay and the polymer matrix. Two times improvement in the adhesive strength and scratch hardness, 10 MPa increments in the tensile strength and 112°C more thermo‐stability have been observed without much affecting the impact resistance, bending, and elongation at break of the nanocomposites compared to the pristine epoxy modified HBPU system. Thus, the resulted nanocomposites are promising materials for different advanced applications including adhesive. Copyright © 2009 John Wiley & Sons, Ltd.     

Hyperbranched molecules based on calixarenes

Synthesis of the diamide 2 derived from tris(2-aminoethyl)amine and monocarboxymethylcalix[4]arene provides a starting material useful for the preparation of a variety of hyperbranched molecules. Metal ion binding is one of the potentially useful properties of these new materials.     

3D Mass diffusion in ordered nanocomposite systems: Finite element simulation and phenomenological modeling

The optimization of polymer barrier properties is currently of crucial importance for a wide range of applications from packaging to building or even energy applications. To meet the requirements of these applications, polymer matrices are often combined with impermeable (nano) fillers. Different nanofiller natures, shapes, and contents have been experimentally used and a large range of barrier materials has been obtained^. In the meantime, several numerical approaches have been developed to model gas diffusion properties of nanocomposite materials. However, these approaches often considered bidimensional systems. The aim of this work is to develop 3D Finite Element Model which would be used to predict gas barrier properties of nanocomposites for disk‐shaped nanofillers. The model thus obtained is valid in a wide range of fillers volume fraction values as well as aspect ratios, which makes it possible to go from diluted regimes to semidiluted or even concentrated ones. Furthermore, an analytical equation which describes gas diffusion through nanocomposites films has been built and validated with our finite element modeling model. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 51–61     

Structure and properties of composites compression‐molded from silk fibroin powder and waterborne polyurethane

The degummed silk filament was pulverized with a home‐made machine to obtain the silk fibroin (SF) powder with the diameter of around 3 µm. The resulting SF powder was blended with waterborne polyurethane (WPU) aqueous dispersion, and then was dried and compression‐molded to prepare novel blended materials with improved miscibility and mechanical properties. WPU acted as a plasticizer and one of the components for the blends during the compression‐molded process. The structure, morphology, and properties of the blended films were investigated. The results indicated that β‐sheet of SF existed in the blended films. The SEM images showed that the cross‐section of the blended films exhibited an overall homogeneous morphology. Furthermore, the transmission electron microscope observation exhibited that some sphere‐like SF particles were well dispersed in the WPU matrix. The hydrogen bond interaction between SF and WPU in the blended films led to an increase of the glass transition temperature for the soft segment of WPU in the blended films. The blended films showed an improved Young's modulus and tensile strength from 1.2 to 288.9 MPa and 0.3 to 16.5 MPa, respectively, with the increasing of SF up to a content of 70 wt%. The hydrogen‐bonding interactions existing in SF and WPU and compression molding method played the important role in improving the miscibility and mechanical properties of the blended films. Copyright © 2011 John Wiley & Sons, Ltd.     

Cellulose/iron oxide hybrids as multifunctional pigments in thermoplastic starch based materials

Cellulose/iron oxide hybrids were prepared by the controlled hydrolysis of FeC₂O₄ in the presence of vegetable and bacterial cellulose fibres as substrates. By varying the relative amount of FeC₂O₄ and NaOH, either hematite or magnetic iron oxides were grown at the cellulose fibres surfaces. This chemical strategy was used for the production of a number of materials, whose coloristic properties associated to their reinforcement role allowed their use as new hybrid pigments for thermoplastic starch (TPS) based products. The TPS reinforced materials were characterized by several techniques in order to evaluate: the morphology and the compatibility between the matrix and the fillers; the mechanical reinforcement effect of the cellulose/iron oxide pigments on TPS and the coloristic properties of the composites. All materials showed good dispersion and strong adhesion for the cellulose/iron oxide nanocomposites in the TPS matrix thus resulting in improved mechanical properties.     

Effect of walnut shells and silanized walnut shells on the mechanical and thermal properties of rigid polyurethane foams

In the study walnut shells (WS) and silanized walnut shells (S_WS) were used as cellulosic fillers for novel polyurethane (PU) composite foams. The impact of 1, 2 and 5 wt% of WS and S_WS on the foaming parameters, mechanical and thermo-mechanical properties of obtained materials were evaluated. The results have shown that compared to untreated WS filler, the application of S_WS leads to PU foams with more regular structure and improved physico-mechanical behavior of PU materials. For example, compared to controlled WS_0 foam, PU foams enhanced with 1 wt% of the S_WS exhibited better mechanical properties, such as higher compressive strength (~15% of improvement), better impact strength (~6% of improvement), and improved tensile strength (~9% of improvement). The addition of S_WS improved the thermomechanical stability of PU foams. This work provides a better understanding of a relationship between the surface modification of the walnut shell filler and the mechanical, insulating and thermal properties of the PU composites. Due to these positive and beneficial effects, it can be stated that the use of WS and S_WS as natural fillers in PU composite foams can promote a new application path in converting agricultural waste into useful resources for creating a new class of green materials.     

Poly(vinyl chloride) Nanocomposites

Poly(vinyl chloride) is one of the major thermoplastics beside other commodities polymers like polyethylene and polystyrene. However, some of its main characteristics such as plasticity, thermal and photo stability are inferior to other commodity polymers. Adding nano scale inorganic fillers to poly(vinyl chloride) or other polymers in view to obtain polymer nanocomposites with superior properties has drawn the attention of many researchers in the last decades. Poly(vinyl chloride) nanocomposites are obtained mainly by in situ polymerization, solution based or mixing techniques. The resulting products show improvement of most important properties of poly(vinyl chloride) such as thermal, mechanical, rheological, flammability, antibacterial, etc. This paper presents preparation ways of poly(vinyl chloride) nanocomposites using different nano fillers and the improved properties compared with those of virgin poly(vinyl chloride).     

Functionalization of graphene oxide with different diisocyanates and their use as a reinforcement in waterborne polyurethane composites

Abstract

To examine the reinforcing effects of isocyanated graphene oxide (NCO-GO) on a waterborne polyurethane matrix, the surface of GO was respectively modified by isophorone diisocyanate (IPDI), hexamethylene diisocyanate (HDI) and toluene diisocyanates (TDI) and then confirmed by FT-IR, Raman, TGA, XRD, TEM, AFM and SEM-EDS. The dispersity behavior between different NCO-GO and polymer was evaluated by FESEM and XRD. The nanocomposites’ chemical structure, emulsion morphology, hydrophobicity, thermal and mechanical properties were investigated by FT-IR, TEM, TGA, tensile testing machine and water contact angle test, respectively. It was shown that these properties of nanocomposites including tensile strength, initial thermal degradation and hydrophobicity were increased by the incorporation of NCO-GO, in which, particularly, the tensile stress and initial degradation temperature were respectively increased from 13.32 to 18.80?Mpa and 249 to 288?°C after the addition of TDI-GO. These superior reinforcing effects were attributed to the two-dimensional structure of NCO-GO as well as the good interfacial adhesion between the NCO-GO and WPU matrix.     

Preparation and Rheological Characterization of Polymer Nanocomposites Based on Expanded Graphite

A new type of conductive filler, namely expanded graphite (EG), was used to prepare novel nanocomposites. The EG was incorporated into several rather different polymers, specifically polycarbonate (PC), low‐density polyethylene (LDPE), isotactic polypropylene (PP), and polystyrene (PS), using melt mixing in a small‐scale DACA‐Microcompounder. The EG content was varied between 1 and 20 wt%. The rheological properties and morphologies of the nanocomposites were characterized by melt rheology and scanning electron microscopy (SEM), respectively. The melt‐state linear viscoelastic properties were investigated using an ARES rheometer, with the measurements performed in the dynamic mode at various temperatures over a wide range of frequencies. Addition of the EG increased the linear dynamic moduli and melt viscosity of the materials. Up to a certain critical concentration of EG, the materials exhibited a simple liquid‐like behavior. Above this concentration, however, significant changes in the frequency dependences of the moduli and viscosity were observed. In addition, the moduli showed a liquid‐solid transition resulting in a second plateau in the low frequency‐regime, and the complex viscosity revealed shear‐thinning behavior. Specific values of this percolation concentration were found to be at around 4 wt% in the case of PC/EG, 9 wt% for PP/EG and PS/EG, and 12 wt% for PE/EG. This critical concentration was correlated to a network‐like structure formed through interactions between the EG platelets and the polymers. The extent of these complications was found to vary from polymer to polymer, presumably due to different degrees of EG exfoliation and dispersion arising from different EG‐polymer interactions and from variable shearing forces dependent on the polymer viscosities. The formation of network‐like structures is very sensitively displayed using van Gurp‐Palmen plots, which are most suitable for identifying “rheological percolation” in our investigated systems.     

氧化钛/氧化石墨纳米复合材料的制备、表征及性能

采用四氯化钛(TiCl₄)和氧化石墨为主要原料, 通过原位复合的方法制备了氧化钛/氧化石墨(TiO₂/GO)纳米复合材料. 采用傅里叶变换红外(FTIR)光谱仪、X射线衍射(XRD)仪、热重-差热分析(TG-DTA)仪、X射线光电子能谱(XPS)、透射电子显微镜(TEM)和扫描电子显微镜(SEM)等手段研究了TiO₂/GO纳米复合材料的结构和性能. 结果表明, 石墨在氧化过程中结构层键合大量含氧官能团, 部分含氧官能团进一步与纳米TiO₂以化学键结合; 复合后氧化石墨原有衍射峰消失. 将TiO₂/GO添加到水性聚氨酯(WPU)中, 制备了TiO₂/GO-WPU复合涂膜. 紫外吸收光谱表明, 随着氧化石墨含量的增加, 复合涂膜的紫外吸收能力增强, 当GO含量达到一定数值时, 涂膜的紫外吸收最强, 随着GO含量继续增加吸收又呈下降趋势, 存在一较优浓度值. TiO₂/GO的添加显著提高了聚氨酯涂层的抗紫外线性能, 耐磨损性能和热稳定性能.     

Preparation and Characterization of Epoxy/Inorganic Anti‐electrostatic Nanocomposites Using Submicrometer Al(OH)3 and Colloid Al2O3

New organic‐inorganic hybrid materials and their anti‐electrostatic hybrid membranes are prepared via sol‐gel process. The polycondensation of epoxy oligomers and AEAPS/Al₂O₃ complexes which are organically surface modified submicrometer aluminum trihydroxide inorganic fillers with an active aminoterminal silane coupling agent, N‐(2‐aminoethyl)‐3‐aminopropyltrimethoxysilane (AEAPS), are performed. AEAPS enhances the interfacial interactions between the inorganic fillers and epoxy polymers. Meanwhile, this coupling agent maintains well dispersion of fillers in these composites. To improve the mechanical strength and thermal stability, pyromellitic dianhydride (PMDA) is used as curing agent. These hybrid films prepared from this method have excellent physical properties, such as UV‐shielding, high transmission in visible resign (> 85%), high hardness (7～8H) , high adhesive force (7～8) and low relative surface resistance (9.71 × 10¹¹～1.26 × 10¹⁰ Ω/cm²) with anti‐electrostatic characters. For thermal resistance, the best Td value of epoxy/PMDA/AEAPS/Al₂O₃ is 378.6 °C which is 85.4 °C higher than that of neat epoxy resin. Physical properties of these materials are almost the same as those of the nanocomposites prepared from expensive colloid Al₂O₃. Evidences from TEM micrograph show that the inorganic additives are dispersed evenly in organic matrix with nanometer scale.     

Synthesis of poly(1-vinylimidazole)-block-poly(9-vinylcarbazole) copolymers via RAFT and their use in chemically responsive graphitic composites

This study reports the synthesis of novel poly(1-vinylimidazole)-b-poly(9-vinylcarbazole) (PVI-b-PVK) block copolymers with varying monomer ratios using reversible addition-fragmentation chain-transfer (RAFT) polymerization and their incorporation in responsive composite materials. Specifically, non-covalent exfoliation of two different conductive fillers, multi-walled carbon nanotubes (MWCNTs) or reduced graphene oxide (rGO), was studied. The percolation threshold of the synthesized nanocomposites was dependent on the polymer used for dispersion, showing a better affinity of the fillers for block copolymers with higher relative carbazole content. Resistivity measurements showed selective variation in the resistance signal when the materials were exposed to various organic solvents and acids, providing a good basis for the design of sensing devices.