Mischkristalle aus A4B3-Molekülen (A = P,As; B = S,Se)

Mixed Crystals from A₄B₃ Molecules (A = P, As; B = S, Se) The system P₄S₃? P₄Se₃? As₄S₃? As₄Se₃ was investigated by thermal and x-ray methods. Five regions of solid solubility with different crystal structures were found at room temperature. The range of existence can be influenced by the temperature of annealing. All these phases transform into a plastic-crystalline modification with complete solid solubility at higher temperature. A decomposition reaction of the A₄B₃ molecules was observed in the P₄Se₃/As₄Se₃/As₄S₃ part of the system. The molecules decompose into A₄B₄ molecules and an amorphous phase. The existence of all molecules of the type P_nAs_4–nS_mSe_3–m (n = 0–4, m = 0–3) and also As₄S_mSe_4–m (m = 1–3) was verified by mass spectrometric measurements. The thermochemical data of the mixed crystals are determined by the type of the constituent A₄B₃ molecules. The temperature and the entropy of the α–β transition are lower for mixed crystals, formed by substituted molecules, than for those of the same structure, consisting of pure A₄B₃ molecules.     

Solid State Chemistry of A4B3−Molecules

Abstract

The system P₄S₃?P₄Se₃?As₄S₃?As₄Se₃ was investigated by thermal and X-ray methods. Five regions of solid solubility with different crystal structures were found. All transform at higher temperatures into the plastically-crystalline state with β-P₄S₃?structure.

The substituted species P_4-nAs_nS_mSe_3-m (n = 0–4, m = 0–3) are formed in molten mixtures of A₄B₃?molecules (FIGURE 1). They were identified by HPLC and mass-spectrometric measurements.

After long equilibration times P₄Se₃, As₄S₃ and As₄Se₃ decompose peritectoidally into the resp. A₄B₄?species and an amorphous product.     

Neues vom P4Se4

New Results on P₄Se₄ Preparation of P₄Se₄ from the elements yields always the β-modification of P₄Se₄. α-P₄Se₄ is obtained only with selenium deficient samples. However, it is also observed, when P₄Se₃ is annealed and then extracted with CS₂. The insoluble part has the X-ray pattern of α-P₄Se₄. A reversible α-β transition is not observed. MAS-³¹P-NMR investigations on solid P₄Se₄ by Eckert et al. [2] reveal P₂Se_4/2 building units, which are, in view of our results, not dimer but linked to a polymeric network. Well-crystallized samples of β-P₄Se₄ are obtained only at measuring temperatures above 573 K. The structure is of monoclinic symmetry with the space group P2₁/n (a = 114.9, b = 729.0, c = 1211.0 pm, β = 120.80°). The reaction of α-P₄Se₃I₂ with bis-(trimethyltin)selenide in CS₂ at low temperature yields molecular α-P₄Se₄, which can be detected in solution by ³¹P-NMR spectroscopy. α-P₄Se₄ has D_2d-symmetry like α-P₄S₄. It polymerizes at higher temperature. α-P₄Se₃I(SeSnMe₃) and α-P₄Se₃(SeSnMe₃)₂ were observed in the course of this reaction, too. The analogous reaction of α-P₄Se₃I₂ with bis-(trimethyltin)sulfide leads to comparable results.     

Konzentrationen von Isomeren des Typs P m As4−m X 3 in P4S3-As4S3- und P4Se3-As4Se3-Mischungen

The reactions of P₄S₃ with As₄S₃ and of P₄Se₃ with As₄Se₃ in the molten state yields molecules of the type P _m As_4–m S₃ and P _m As_4–m Se₃, respectively. A method was developed to separate the different components by the HPLC technique, and to determine their concentrations. The identification of the isomers in the HPLC pattern was achieved with the aid of the LC-MS method. In the selenium system, the distribution of the different species is statistical. In the system P₄S₃-As₄S₃, the formation of PAs₃S₃ with one phosphorus atom in the apical position is favoured.

     

Schwingungsspektren von As4S4 und As4Se4

Vibrational Spectra of As₄S₄ and As₄Se₄ The vibrational spectra of solid α- and β-As₄S₄ and the Raman spectrum of molten As₄S₄ have been recorded. The assignments of the frequencies are proposed mainly based on polarization data. The Raman melt spectra suggest that As₄S₄ molecules (symmetry D_2d) are retained in the molten state. A partial decomposition of the melt by prolonged laser irradiation was observed. The Raman spectrum of solid As₄Se₄ is presented and the frequencies are tentatively assigned to an As₄Se₄ molecule of the cradle type, possessing D_2d symmetry.     

Schwingungsspektren von β-P4S5 und P4S7

Vibrational Spectra of β-P₄S₅ and P₄S₇ The vibrational spectra of the solid and liquid cage compounds β-P₄S₅ and P₄S₇ have been recorded. The assignments of the frequencies are proposed mainly based on polarization data. β-P₄S₅ decomposes during melting into P₄S₃ α-P₄S₇ and β-P₄S₆. Molten α-P₄S₇ dissociates to some extent into β-P₄S₆ and sulphur. An association of β-P₄S₆ with α-P₄S₇ is discussed for the molten state. All reactions in molten P₄S₇ are reversible.     

Über die Umsetzung von P4E3I2 (E = S,Se) mit einigen Carbonsäuren und Dithiocarbonsäuren

On the Reaction of P₄E₃I₂ (E = S, Se) with some Carboxylic Acids and Dithiocarbamic Acids By the reaction of α-P₄E₃I₂ (E = S, Se) with carboxylic acids, dithiobenzoic acid or dithiocarbamic acids in the presence of triethylamin or with (C₆H₅)₃SnR, or of β-P₄E₃I₂ with tin-organic compounds α-P₄E₃(I)R, α(β)-P₄E₃R₂ [R = ? OC(O)C₆H₅, ? OC(O)CH₃, ? SC(S)NC₅H₁₀, ? SC(S)N(C₂H₅)₂], α-P₄S₃(I)SC(S)C₆H₅, α-P₄S₃(SC(S)C₆H₅)₂ and β-P₄E₃(I)R (R = ? OC(O)C₆H₅, ? OC(O)CH₃) were prepared in solution and identified by ³¹P NMR spectroscopy. In addition α-P₄S₃(NC₅H₁₀)(SC(S)NC₅H₁₀) was detected. The β-isomers could be obtained also with lesser yields by the reaction with the dithiocarbamic acids, too. The substitution of the second iodine ligand in β-P₄E₃I₂ resulted mainly in β-P₄S₃(R_exo)₂ and by inversion of the configuration at a phosphorus atom, in β-P₄E₃R_exoR_endo. α-P₄S₃I₂ reacted with methanol in CS₂ to α-P₄S₃(OCH₃)(SC(S)OCH₃) and α-P₄S₃(SC(S)OCH₃)₂. The ³¹P NMR data of the compounds are discussed. The ³¹P NMR spectra of the α(β)-P₄E₃ dithiocarbamates indicate dynamic processes in the solution, e. g. α-P₄S₃(I)(SC(S)NR₂) showed an intramolecular conversion, due to the anisobidentate dithiocarbamate ligand. This behaviour had not previously been noticed for compounds with a P₄S₃-skeleton.     

Ab initio quantum mechanical calculations of energy,geometry, vibrational frequencies and IR intensities of tetraphosphorus tetrasulphide, α-P4S4(D2d), and vibrational analysis of As4S4 and As4Se4

Geometry, vibrational frequencies and IR intensities are calculated for α-P₄S₄ by scaled quantum mechanical calculations at the 6-31G*/SCF and STO-3G*/SCF levels. For both basis sets the frequencies are scaled with factors close to or equal to those found for P₄S₃, and based on these results a revised assignment is proposed. The α-P₄S₄ force field is transferred to the isostructural As₄S₄ and As₄Se₄ molecules and rescaled, and based on a good fit to experimental frequencies a new assignment is also proposed for these compounds.     

Phase equilibria in the Ag4SSe–As2Se3 system

The phase diagram of the system Ag₄SSe–As₂Se₃ is studied by means of X-ray diffraction, differential thermal analyses and measurements of the microhardness and the density of the materials. The unit-cell parameters of the intermediate phases 3Ag₄SSe·As₂Se₃ (phase A) and Ag₄SSe·2As₂Se₃ (phase B) are determined as follows for phase A: a=4.495 Å, b=3.990 Å, c=4.042 Å, α=89.05°, β=108.98°, γ=92.93°; for phase B: a=4.463 Å, b=4.136 Å, c=3.752 Å, α=118.60°, β=104.46°, γ=83.14°. The phase 3Ag₄SSe·As₂Se₃ and Ag₄SSe·2As₂Se₃ have a polymorphic transition α?β consequently at 105 and 120°C. The phase A melts incongruently at 390°C and phase B congruently at the same temperature.     

Phases of tetraphosphorus triselenide analysed by magic angle spinning 31P NMR and Raman spectroscopy,and the Raman spectrum of tetraphosphorus tetraselenide

The local environments of the cage molecules in the phases of P₄Se₃ are analysed with ³¹P MAS-NMR and Raman spectroscopy.The ³¹P MAS-NMR spectra of the orientationally ordered α and α′,-phases have different chemical shifts for the apical P atom (α: 68.0, 86 and 88.0 ppm; α′: 75.8 ppm), but similar chemical shifts for the basal P atoms (α: −58.8 ppm, α′: −60.0 ppm).When either α or α′-P₄Se₃ is heated above 358 K, the resulting β-P₄Se₃ has a well-resolved, liquid-like spectrum, indicating extensive molecular re-orientation. The slowly quenched β-phase shows a remnant β-phase mixed with the α-phase as well as P₄Se₄. A rapidly quenched sample of β-P₄Se₃ also shows a small remnant β-phase in the α-phase, but also a new phase with sharp resonances at 12.5, 3.6, 0.1 and −12 ppm. These are probably due to a P₄Se₄ phase which may be orientationally disordered.The Raman spectrum of P₄Se₃ heated above the α-β phase transition temperature shows a disappearance of the lattice modes and the 373 cm⁻¹ mode as previously reported, but also shows some decomposition to P₄Se₄. The β-phase reverts into the α-phase on quenching, with only weak remnant bands attributable to P₄Se₄. The bands of P₄Se₄ become more prominent as the temperature of the β-phase is raised, but above the β-∂ phase transition they are less prominent.The Raman spectrum of P₄Se₄ is reported. The strongest band is at 350 cm⁻¹, with the next strongest band at 185 cm⁻¹. The spectra indicate that the dominant isomer is the selenium analogue of α-P₄S₄ (D_2h), confirming previous ³¹P MAS-NMR studies.     

Character of interaction and glass formation in the TlAs<Subscript>2</Subscript>Se<Subscript>4</Subscript>-Tl<Subscript>3</Subscript>As<Subscript>2</Subscript>S<Subscript>3</Subscript>Se<Subscript>3</Subscript> system

The TlAs₂Se₄-Tl₃As₂S₃Se₃ system was investigated by physicochemical methods (DTA, X-ray powder diffraction, microstructural analysis), and its phase diagram was constructed. The TlAs₂Se₄-Tl₃As₂S₃Se₃ join is a quasi-binary internal section of the As-Tl-S-Se quaternary system. The solubility range of TlAs₂Se₄-based solid solutions is extended to 7 mol %, and the region of Tl₃As₂S₃Se₃-based solid solutions is extended to 15 mol %.     

Coordination Chemistry of P4S3 and P4Se3 towards the Iron Fragments [Fe(Cp)(CO)2]+ and [Fe(Cp)(PPh3)(CO)]+

The complexes Ag(L)_n[WCA] (L=P₄S₃, P₄Se₃, As₄S₃, and As₄S₄; [WCA]=[Al(OR^F)₄]⁻ and [F{Al(OR^F)₃}₂]⁻; R^F=C(CF₃)₃; WCA=weakly coordinating anion) were tested for their performance as ligand-transfer reagents to transfer the poorly soluble nortricyclane cages P₄S₃, P₄Se₃, and As₄S₃ as well as realgar As₄S₄ to different transition-metal fragments. As₄S₄ and As₄S₃ with the poorest solubility did not yield complexes. However, the more soluble silver-coordinated P₄S₃ and P₄Se₃ cages were transferred to the electron-poor Fp⁺ moiety ([CpFe(CO)₂]⁺). Thus, reaction of the silver salt in the presence of the ligand with Fp−Br yielded [Fp−P₄S₃][Al(OR^F)₄] ( 1 a ), [Fp−P₄S₃][F(Al(OR^F)₃)₂] ( 1 b ), and [Fp−P₄Se₃][Al(OR^F)₄] ( 2 ). Reactions with P₄S₃ also yielded [FpPPh₃−P₄S₃][Al(OR^F)₄] ( 3 ), a complex with the more electron-rich monophosphine-substituted Fp⁺ analogue [FpPPh₃]⁺ ([CpFe(PPh₃)(CO)]⁺). All complex salts were characterized by single-crystal XRD, NMR, Raman, and IR spectroscopy. Interestingly, they show characteristic blueshifts of the vibrational modes of the cage, as well as structural contractions of the cages upon coordination to the Fp/FpPPh₃ moieties, which oppose the typically observed cage expansions that lead to redshifts in the spectra. Structure, bonding, and thermodynamics were investigated by DFT calculations, which support the observed cage contractions. Its reason is assigned to σ and π donation from the slightly P−P and P−E antibonding P₄E₃-cage HOMO (e symmetry) to the metal acceptor fragment.     

Reaktionen von P4S3I2 mit bifunktionellen Liganden

Reactions of P₄S₃I₂ with Bifunctional Ligands Nitrogen, oxygen, selenium or carbon atoms were introduced as bridges into the P₄S₃ skeleton by the reaction of α- or β-P₄S₃I₂ with bifunctional ligands. Among compounds in the series α-P₄S₃-α-E, the oxide μ-P₄SO was made for the first time. High concentrations of α-P₄S₄Se, made by a new route, allowed observation of ⁷⁷Se satellites in its ³¹P NMR spectrum and hence the assignment of ³¹P chemical shifts. Polymeric species were more stable than these monomers, leading to low yields in both reactions. α- and β-isomers of P₄S₃I₂ reacted with diethyl malonate. While β-P₄S₃I₂ gave traces of β-P₄S₃(CR₂)(R = C₂H₅CO₂) and of β-P₄S₃(CHR₂)_exo(CHR₂)_endo, along with insoluble products, α-P₄S₃I₂ yielded α-P₄S₃(CR₂), which could be isolated. P₄S₂(CR₂), a new skeleton similar to that of P₄S₃, was formed on storage of CS₂ solutions of a-P₄S₃(CR₂) for two days. The ³¹P NMR data of the molecules are given.     

As12Se44—: ein neuartiges Selenoarsenatanion mit einem Polyarsenkäfig in der Verbindung [Co(NH3)6]2As12Se4 · 12 NH3

As₁₂Se₄^4—: a New Selenoarsenate Anion with a Polyarsenic Cage in the Compound [Co(NH₃)₆]₂As₁₂Se₄ · 12 NH₃ Orange coloured crystals of [Co(NH₃)₆]₂As₁₂Se₄ · 12 NH₃ were prepared by the reduction of As₄Se₄ with a solution of sodium in liquid ammonia and subsequent precipitation with CoBr₂. The X‐ray structure determination shows them to contain the selenoarsenate anion As₁₂Se₄^4—, which consists of a central As₁₂‐cage with four exo‐bonded, formally negatively charged Se atoms. The structure of the As₁₂‐cage is equivalent to the main polyphosphorus building unit of a known organopolyphosphane and of tubular P₁₂ in the compound (CuI)₃P₁₂.     

Darstellung und Kristallstruktur des ersten polymeren Phosphorselenids catena-(P4Se4)x

Preparation and Crystal Structure of the First Polymeric Phosphorus Selenide catena-(P₄Se₄)_x Catena-(P₄Se₄)_x was prepared in crystalline form from the elements using iodine as a catalyst, and characterized by means of X-ray diffraction and IR spectroscopy. Single-crystal investigations (space group P2₁/c, a = 1 119.2(3), b = 728.2(2), c = 1 142.5(3) pm, β = 115.91(2)°, V = 837.5(7) · 10⁶ pm³) revealed parallel chains of P₄Se₃ hetero-norbornane units linked via Se atoms. Thus, being the first phosphorus selenide which does not contain discrete molecules, catena-(P₄Se₄)_x can be regarded as a polymeric form of α-P₄Se₄ or as a crystalline modification of vitrous phosphorus selenide.     

Dinuclear Manganese(II) Complexes with Bridging Selenidodiarsenate Anions [As2Se4]4−, [As2Se5]4− and [As2Se6]2−

Solvothermal reaction of [MnCl₂(amine)] (amine = terpy and tren) with elemental As and Se at a 1:1:2 molar ratio in H₂O/tren (10:1) affords the dimanganese(II) complexes [{Mn(terpy)}₂(μ‐As₂Se₄)] ( 1 ) and [{Mn(tren)}₂(μ‐As₂Se₅)] ( 2 ) respectively. The tetradentate [As₂Se₄]^4? bridging ligands in 1 contain a central As–As bond and exhibit approximately C_2h symmetry. Pairs of gauche sited Se atoms participate in five‐membered As₂Se₂Mn chelate rings. In contrast, two AsSe₃ pyramids share a common corner in the [As₂Se₅]^4? ligands of 2 and each coordinates an [Mn(tren)]²⁺ fragment through a single terminal Se atom. Such dinuclear complexes are linked into tetranuclear moieties through weak Se···Mn interactions of length 3.026(3) Å involving one of these terminal Se atoms. At a 1:3:6 molar ratio, solvothermal reaction of [MnCl₂(tren)] with As and Se leads to formation of a second dinuclear complex [{Mn(tren)}₂(μ‐As₂Se₆)₂] ( 3 ), which contains two bridging bidentate [As₂Se₆]^2? ligands. These are cyclic with an As₂Se₄ ring and can be regarded as being derived from [As₂Se₅]^4? anions by formation of two Se‐Se bonds to an additional Se atom.     

Aminoderivate von α‐P4S3, α‐P4Se3 und P3Se4 – Daten und Analyse der 31P‐NMR‐Spektren in Lösungen

Amino Derivatives of α‐P₄S₃, α‐P₄Se₃, and P₃Se₄; Data and Analyses of their ³¹P NMR Spectra in Solution α‐P₄S₃I₂, α‐P₄Se₃I₂, and P₃Se₄I were reacted with primary and secondary amines in CS₂. The reaction yields exo‐exo isomeres of α‐P₄S₃L₂ and α‐P₄Se₃L₂, the N‐bridged compounds α‐P₄S₃L′ and P₃Se₄L, with L = NHR¹, NPhR², THC (R¹ = ^tBu, Ad, Ph, Flu, TPMP; R² = Me, Et, ⁱPr), and L′ = NR¹. The ³¹P NMR data of the compounds in CS₂ solution were measured. By the reaction of α‐P₄Se₃I₂ with primary amines NH₂^tBu and NH₂Ad in CS₂ an asymmetric isomer α‐P₄Se₃I_endo(NHR¹)_exo was observed for the first time in the ³¹P NMR spectra. The influence of the ligands L on the ³¹P NMR parameter of α‐P₄S₃L₂, α‐P₄Se₃L₂, and P₃Se₄L is discussed.     

Derivate von arsensubstituierten Phosphorchalkogeniden

Derivatives of Arsenic Substituted Phosphorus Chalcogenides α-AsP₃S₃I₂, α-AsP₃Se₃I₂, and three isomers of β-AsP₃S₃I₂ were observed besides several phosphorus sulfides by ³¹P NMR spectroscopy after the reaction of As_nP_4–nE₃ (E ? S; Se; n = 0–4) with I₂ in the melt or with I₂, PI₃, and N-iodosuccinimid in CS₂ solutions. The reaction of As_nP_4–nS₃ with CHI₃ in CS₂ solution yielded two isomers of β-AsP₃S₃(CHI₂)I.     

Cs4BiAs3Se7: A Novel Bismuth‐Selenoarsenate with Infinite [BiAs3Se7]4– Chains Containing Two Different Anions, [AsSe3]3– and trans‐[As2Se4]4–

A new phase has been prepared by methanolothermal reaction of Cs₂CO₃, BiCl₃ and Li₃AsSe₃ at 130 °C for 36 hours. Cs₄BiAs₃Se₇ ( I ) reveals the first Bi‐selenoarsenate polyanionic chain [Bi(As₂Se₄)(AsSe₃)]^4–, consisting of Bi³⁺ ions in a distorted octahedral environment of [AsSe₃]^3– and trans‐[As₂Se₄]^4– units. The latter anion consists of a central “As₂⁴⁺” dumb‐bell whereby two Se atoms are attached to each of the As atoms. Structural Data: Space Group P2₁/n, a = 13.404(4) Å, b = 23.745(8) Å, c = 13.880(4) Å, β = 99.324(6)°, Z = 8.     

Phase diagram of the In3As2Se6-In3As2S3Se3 system

The In₃As₂Se₆-In₃As₂S₃Se₃ system has been investigated by methods of physicochemical analysis (DTA, X-ray powder diffraction, MSA) and by microhardness and density measurements. The phase diagram of the system, which is the quasi-binary section of the As-In-S-Se quaternary system, has been constructed. The region of the In₃As₂Se₆-based solid solutions is extended to 7 mol %, and the In ₃As₂S₃Se₃-based region to 15 mol %. A new quaternary compound In₆As₄S₃Se₉ is found in the system. Original Russian Text ? I.I. Aliev, R.S. Magammedragimova, A.A. Farzaliev, Dzh. Veliev, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 4, pp. 691–694.