Synthesis and crystallization behavior study of syndiotactic polystyrene‐g‐isotactic polypropylene (sPS‐g‐iPP) graft copolymers

Based on coordination polymerization mechanism only, novel stereoregular graft copolymers with syndiotactic polystyrene main chain and isotactic polypropylene side chain (sPS‐g‐iPP) were synthesized via two steps of catalytic reactions. First, a chain transfer reaction was initiated by a chain transfer complex composed of a styrene derivative, 1,2‐bis(4‐vinylphenyl)ethane, and hydrogen in propylene polymerization mediated by rac‐Me₂Si[2‐Me‐4‐Ph(Ind)]₂ZrCl₂ and MAO, which gave iPP macromonomer bearing a terminal styryl group (iPP‐t‐St). Then the iPP‐t‐St macromonomers of varied molecular mass were engaged in syndiospecific styrene polymerization over a typical mono‐titanocene catalyst (CpTiCl₃/MAO) under different conditions to produce sPS‐g‐iPP graft copolymers of varied structure. With an effective purification process, well‐defined sPS‐g‐iPP copolymers were obtained, which were then subjected to differential scanning calorimetry (DSC) and polarized optical micrograph (POM) studies. The graft copolymers were generally found with dual melting and crystallization temperatures, which were ascribable respectively to the sPS backbone and iPP graft. However, it was revealed that the two segments displayed largely different melting and crystallization behaviors than sPS homopolymer and the precursory iPP‐t‐St macromonomer. Consequently, the graft copolymer exhibited much distinctive crystalline morphologies when compared with their individual components. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

RAFT synthesis of a water‐soluble triblock copolymer of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) using a macromolecular chain transfer agent in aqueous solution

Triblock copolymers of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) with narrow molecular weight distribution (M_w/M_n = 1.28–1.40) and well‐defined structure have been synthesized in aqueous solution at 70 °C via reversible addition‐fragmentation chain transfer polymerization. Poly(ethylene glycol) (PEG) capped with 4‐cyanopentanoic acid dithiobenzoate end groups was used as the macro chain transfer agent (PEG macro‐CTA) for sole monomer sodium 4‐styrenesulfonate. The reaction was controllable and displayed living polymerization characteristics and the triblock copolymer had designed molecular weight. The reaction rate depended strongly on the CTA and initiator concentration ratio [CTA]₀/[ACPA]₀: an increase in [CTA]₀/[ACPA]₀ from 1.0 to 5.0 slowed down the polymerization rate and improved the molecular weight distribution with a prolonged induction time. The polymerization proceeded, following first‐order kinetics when [CTA]₀/[ACPA]₀ = 2.5 and 5.0. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3698–3706, 2007     

Spacer‐length‐dependent association in polymers with multiple‐hydrogen‐bonded end groups

Herein, we investigate the influence of spacer length on the homoassociation and heteroassociation of end‐functionalized hydrogen‐bonding polymers based on poly(n‐butyl acrylate). Two monofunctional ureido‐pyrimidinone (UPy) end‐functionalized polymers were prepared by atom transfer radical polymerization using self‐complementary UPy‐functional initiators that differ in the spacer length between the multiple‐hydrogen‐bonding group and the chain initiation site. The self‐complementary binding strength (K_dim) of these end‐functionalized polymers was shown to depend critically on the spacer length as evident from ¹H NMR and diffusion‐ordered spectroscopy. In addition, the heteroassociation strength of the end‐functionalized UPy polymers with end‐functionalized polymers containing the complementary 2,7‐diamido‐1,8‐naphthyridine (NaPy) hydrogen‐bond motif is also affected when the aliphatic spacer length is too short. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

End‐functionalization of syndiotactic polystyrene by vinylsilane inducing selective chain transfer reactions

Structurally well‐defined end‐functionalized syndiotactic polystyrene (sPS) can be prepared by conducting a simultaneous selective chain transfer reaction during the syndiospecific polymerization of styrene in the presence of vinylsilanes. The production of vinylsilane end‐capped sPS involves a unique selective chain transfer pathway via the incorporation of a terminal vinylsilane unit at the polymer chain end by 2,1‐insertion. This unusual insertion pattern situates the bulky silyl functional group at a closer β‐position from the active catalyst center, thus deactivating the propagating chain by a steric jam between the vinylsilane end group and the active catalyst. Subsequently, chain releasing by hydrogen addition (in the presence of H₂) or by β‐elimination (in the absence of H₂) can take place, which leads to the production of end‐functionalized sPS with precise controls of stereoregularity and of the location of functionality. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1690–1698, 2010     

Synthesis of i‐PP‐based functional block copolymer by a facile combination of styryl‐capped i‐PP and ATRP

This article demonstrates a facile and efficient method to combine olefin coordination polymerization with atom transfer radical polymerization (ATRP) for the synthesis of isotactic polypropylene (i‐PP)‐based functional diblock copolymers. The chemistry involves a styryl‐capped i‐PP precursor prepared through the controlled consecutive chain transfer reaction, first to 1,2‐bis(4‐vinylphenyl)ethane and then to hydrogen in propylene polymerization mediated by an isospecific metallocene catalyst. The i‐PP precursor can be quantitatively transformed into i‐PP terminated with a 1‐chloroethylbezene group (i‐PP‐t‐Cl) by a straightforward hydrochlorination process using hydrogen chloride. With the resultant i‐PP‐t‐Cl as a macroinitiator of ATRP, methyl methacrylate (MMA) polymerization was exemplified in the presence of CuBr/pentamethyldiethylenetriamine, preparing i‐PP‐b‐PMMA copolymers of different PMMA contents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

The comonomer inducing selective β‐methyl elimination chain transfer: A new approach for end‐functionalizations of syndiotactic polypropylene‐based copolymers

The end‐functionalization of syndiotactic polypropylene‐based copolymers can be accomplished by conducting propylene polymerization in the presence of norbornene using Me₂C(Cp)(Flu)ZrCl₂/MAO as the catalyst. The detailed structural analyses clearly reveal the occurrence of the β‐methyl elimination chain transfer reaction that leads to the generation of the ethenyl group end‐capped syndiotactic polypropylene‐based propylene–norbornene copolymer. Subsequently, the ethenyl group end‐capped copolymer can be used for the preparation of other end‐functionalized syndiotactic polypropylene‐based copolymers by conducting organic functional group transformation reactions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2167–2176, 2008     

Synthesis of well‐defined azide‐terminated poly(vinyl alcohol) and their subsequent modification via click chemistry

A new azide‐functionalized xanthate, S‐(4‐azidomethylbenzyl) O‐(2‐methoxyethyl) xanthate, was synthesized and used to mediate the reversible addition fragmentation chain transfer polymerization of vinyl acetate. The polymerization was demonstrated to be controlled, and well‐defined PVAc with α‐azide, ω‐xanthate groups were obtained, the xanthate groups of which were further removed by radical‐induced reduction with lauroyl peroxide in the presence of excess 2‐propanol. Hydrolysis of α‐azide‐terminated PVAc (N₃‐PVAc) led to the formation of the corresponding α‐azide‐terminated PVA (N₃‐PVA). Finally, end‐modification of N₃‐PVA by click chemistry with alkyne‐end‐capped poly(caprolactone) (A‐PCL), alkynyl‐mannose, and alkynyl‐pyrene was carried out to obtain a new block copolymer PCL‐b‐PVA, and two PVA with mannose or pyrene as the end functional groups. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy, and FTIR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4494–4504, 2009     

Simultaneous dual end‐functionalization of peg via the passerini three‐component reaction for the synthesis of ABC miktoarm terpolymers

In this article, we demonstrate the Passerini three‐component reaction as a simple, effective method for the synthesis of polymers with double functional end groups, which are key precursors for the preparation of ABC miktoarm terpolymers. Thus, via the one‐step Passerini reaction of monomethoxy poly(ethylene glycol)–propionaldehyde (PEG‐CHO) with 2‐bromo‐2‐methylpropionic acid and propargyl isocyanoacetamide, the PEG chain end was simultaneously functionalized with one atom transfer radical polymerization (ATRP) initiating site and one alkynyl group. The resulting PEG(‐alkynyl)‐Br was then used for the synthesis of three types of miktoarm ABC terpolymers via two approaches. First, we conducted ATRP of N‐isopropylacrylamide (NIPAM), then click reaction with azido‐terminated polystyrene (PS‐N₃) or poly(tert‐butyl acrylate) (PtBA‐N₃) and obtained two ABC miktoarm terpolymers PEG(‐b‐PNIPAM)‐b‐PS and PEG(‐b‐PNIPAM)‐b‐PtBA. Alternatively, we conducted single electron transfer living radical polymerization of tBA and click reaction with PS‐N₃ simultaneously to give PEG(‐b‐PtBA)‐b‐PS. All the polymer precursors and miktoarm terpolymers have been characterized by ¹H NMR, Fourier transform infrared, gel permeation chromatography, demonstrating that both approaches provided well‐defined ABC miktoarm terpolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Influence of the stirring speed and CaCl2 concentration on the nano‐object morphologies obtained via RAFT‐mediated aqueous emulsion polymerization in the presence of a water‐soluble macroRAFT agent

Aqueous emulsion polymerizations of styrene were performed in the presence of a macromolecular reversible addition‐fragmentation chain transfer (RAFT) agent (macroRAFT) composed of acrylic acid (AA) and poly(ethylene oxide) methyl ether acrylate (PEOA), end‐capped by a reactive dodecyl trithiocarbonate group (P(AA‐co‐PEOA)‐TTC). The influence of the stirring speed or the presence of different amounts of a divalent salt, CaCl₂, were investigated in this polymerization‐induced self‐assembly process, in which spherical and nonspherical nano‐objects were formed upon the synthesis of amphiphilic diblock copolymers in situ. It appeared that the addition of CaCl₂ led to the controlled formation of different nano‐objects such as spheres, fibers or vesicles, whereas an appropriate stirring speed was required for the formation of nanofibers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of amphiphilic ABC triblock copolymers by single electron transfer nitroxide radical coupling reaction in tetrahydrofuran

A series of ABC triblock copolymers, that is, polyisoprene‐block‐polystyrene‐block‐poly(ethylene oxide) (PI‐PS‐PEO), PI‐block‐poly(tert‐butyl acrylate)‐block‐PEO (PI‐PtBA‐PEO), and PI‐block‐poly(acrylic acide)‐block‐PEO (PI‐PAA‐PEO) were obtained by combination of anionic technique, atom transfer radical polymerization (ATRP), and single electron transfer nitroxide coupling (SETNRC) reaction. Anionic polymerization of isoprene followed by end capping with ethylene oxide yielded hydroxyl‐terminated PI. After esterification, PI with Br end group was used as a macroinitiator to initiate the polymerization of styrene and tBA by ATRP that was then trapped by 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) group in PEO by SETNRC reaction rapidly with high efficiency in tetrahydrofuran at room temperature. The effect of reaction time and polymer chain length on SETNRC reaction was discussed in detail. In the presence of Cu⁰/tris[2‐(dimethylamino)ethyl]amine, SETNRC between PI‐PS‐Br and PEO‐TEMPO was carried out with the efficiency of up to 91.6% in 2 h. With the increase in polymer chain length, the efficiency decreased fleetly. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of poly(vinylidene fluoride)‐b‐poly(styrene sulfonate) block copolymers by controlled radical polymerizations

Block copolymers based on poly(vinylidene fluoride), PVDF, and a series of poly(aromatic sulfonate) sequences were synthesized from controlled radical polymerizations (CRPs). According to the aromatic monomers, appropriate techniques of CRP were chosen: either iodine transfer polymerization (ITP) or atom transfer radical polymerization (ATRP) from PVDF‐I macromolecular chain transfer agents (CTAs) or PVDF‐CCl₃ macroinitiator, respectively. These precursors were produced either by ITP of VDF with C₆F₁₃I or by radical telomerization of VDF with chloroform, respectively. Poly(vinylidene fluoride)‐b‐poly(sodium styrene sulfonate), PVDF‐b‐PSSS, block copolymers were produced from both techniques via a direct polymerization of sodium styrene sulfonate (SSS) monomer or an indirect way with the use of styrene sulfonate ethyl ester (SSE) as a protected monomer. Although the reaction led to block copolymers, the kinetics of ITP of SSS showed that PVDF‐I macromolecular CTAs were not totally efficient because a limitation of the CTA consumption (56%) was observed. This was probably explained by both the low activity of the CTA (that contained inefficient PVDF‐CF₂CH₂? I) and a fast propagation rate of the monomer. That behavior was also noted in the ITP of SSE. On the other hand, ATRP of SSS initiated by PVDF‐CCl₃ was more controlled up to 50% of conversion leading to PVDF‐b‐PSSS block copolymer with an average number molar mass of 6000 g·mol^?1. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of amphiphilic A2B star‐shaped copolymers of polystyrene‐b‐[poly(ethylene oxide)]2 via atom transfer nitroxide radical coupling

The amphiphilic A₂B star‐shaped copolymers of polystyrene‐b‐[poly(ethylene oxide)]₂ (PS‐b‐PEO₂) were synthesized via the combination of atom transfer nitroxide radical coupling (ATNRC) with ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP) mechanisms. First, a novel V‐shaped 2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐PEO₂ (TEMPO‐PEO₂) with a TEMPO group at middle chain was obtained by ROP of ethylene oxdie monomers using 4‐(2,3‐dihydroxypropoxy)‐TEMPO and diphenylmethyl potassium as coinitiator. Then, the linear PS with a bromine end group (PS‐Br) was obtained by ATRP of styrene monomers using ethyl 2‐bromoisobutyrate as initiator. Finally, the copolymers of PS‐b‐PEO₂ were obtained by ATNRC between the TEMPO and bromide groups on TEMPO‐PEO₂ and PS‐Br, respectively. The structures of target copolymers and their precursors were all well‐defined by gel permeation chromatographic and nuclear magnetic resonance (¹H NMR). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

The relationship between catalyst precursors and chain end groups in homogeneous propene polymerization catalysis

The chain transfer to monomer reactions promoted by primary and secondary growing chains in the propene polymerization promoted by ansa‐zirconocenes and postmetallocene precursors are studied by using DFT methods. From the theoretical results it comes out that the prevalence of propene insertion over β‐hydrogen transfer to the monomer decreases drastically in the presence of a secondary chain. Furthermore, we explained the reason why C₂‐symmetric metallocene catalysts promote the selective formation of cis but‐2‐enyls end group after a 2,1 inserted unit whereas for octahedral bis(phenoxy‐imine)titanium‐based catalysts, chain release promotes exclusively the formation of allyl terminated chain end. These results might be useful to design ligand precursors able to obtain not only high M_n PP polymers but also tuned chain end groups to build new polymer architectures. Overall, a more general picture of the enantioselectivity of the chain transfer to monomer processes is reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 699–708, 2010     

Synthesis of ω‐sulfonated polystyrene via reversible addition fragmentation chain transfer polymerization and postpolymerization modification

The synthesis of chain‐end sulfonated polystyrene [PS (ω‐sulfonated PS)] by reversible addition fragmentation chain transfer (RAFT) polymerization followed by postpolymerization modification was investigated by two methods. In the first method, the polymer was converted to a thiol‐terminated polymer by aminolysis. This polymer was then sulfonated by oxidation of the thiol end‐group with m‐chloroperoxybenzoic acid (m‐CPBA) to produce a sulfonic acid end‐group. In the second method, the RAFT‐polymerized polymer was directly sulfonated by oxidation with m‐CPBA. After purification by column chromatography, ω‐sulfonated PS was obtained by both methods with greater than 95% end‐group functionality as measured by titration. The sulfonic acid end‐group could be neutralized with various ammonium or imidazolium counter ions through acid–base or ionic metathesis reactions. The effect of the ionic end‐groups on the glass transition temperature of the PS was found to be consistent with what is known for PS ionomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

R‐RAFT approach for the polymerization of N‐isopropylacrylamide with a star poly(ε‐caprolactone) core

Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a more robust and versatile approach than other living free radical polymerization methods, providing a reactive thiocarbonylthio end group. A series of well‐defined star diblock [poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide)]₄ (SPCLNIP) copolymers were synthesized by R‐RAFT polymerization of N‐isopropylacrylamide (NIPAAm) using [PCL‐DDAT]₄ (SPCL‐DDAT) as a star macro‐RAFT agent (DDAT: S‐1‐dodecyl‐S′‐(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate). The R‐RAFT polymerization showed a controlled/“living” character, proceeding with pseudo‐first‐order kinetics. All these star polymers with different molecular weights exhibited narrow molecular weight distributions of less than 1.2. The effect of polymerization temperature and molecular weight of the star macro‐RAFT agent on the polymerization kinetics of NIPAAm monomers was also addressed. Hardly any radical–radical coupling by‐products were detected, while linear side products were kept to a minimum by careful control over polymerization conditions. The trithiocarbonate groups were transferred to polymer chain ends by R‐RAFT polymerization, providing potential possibility of further modification by thiocarbonylthio chemistry. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Block copolymers of poly(ethylene oxide) and poly(vinyl alcohol) synthesized by the RAFT methodology

A methodology for the synthesis of well‐defined poly(ethylene oxide)‐block‐poly(vinyl alcohol) (PEO‐b‐PVA) and PVA‐b‐PEO‐b‐PVA polymers was reported. Novel xanthate end‐functionalized PEOs were synthesized by a series of end‐group transformations. They were then used to mediate the reversible addition–fragmentation chain transfer polymerization of vinyl acetate to obtain well‐defined poly(ethylene oxide)‐b‐poly(vinyl acetate) (PEO‐b‐PVAc) and PVAc‐b‐PEO‐b‐PVAc. When these block copolymers were directly hydrolyzed in methanol solution of sodium hydroxide, polymers with brown color were obtained, which was due to the formation of conjugated unsaturated aldehyde structures. To circumvent these side reactions, the xanthate groups were removed by adding a primary amine before hydrolysis and the products thus obtained were white powders. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy and FT‐IR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1901–1910, 2009     

Thermal and pH‐sensitive gold nanoparticles from H‐shaped block copolymers of (PNIPAM/PDMAEMA)‐b‐PEG‐b‐(PNIPAM/PDMAEMA)

Well‐defined H‐shaped pentablock copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM), poly(N,N‐dimethylaminoethylacrylamide) (PDMAEMA), and poly(ethylene glycol) (PEG) with the chain architecture of (A/B)‐b‐C‐b‐(A/B) were synthesized by the combination of single‐electron‐transfer living radical polymerization, atom‐transfer radical polymerization, and click chemistry. Single‐electron‐transfer living radical polymerization of NIPAM using α,ω azide‐capped PEG macroinitiator resulted in PNIPAM‐b‐PEG‐b‐PNIPAM with azide groups at the block joints. Atom‐transfer radical polymerization of DMAEMA initiated by propargyl 2‐chloropropionate gave out α‐capped alkyne‐PDMAEMA. The H‐shaped copolymers were finally obtained by the click reaction between PNIPAM‐b‐PEG‐b‐PNIPAM and alkyne‐PDMAEMA. These copolymers were used to prepare stable colloidal gold nanoparticles (GNPs) in aqueous solution without any external reducing agent. The formation of GNPs was affected by the length of PDMAEMA block, the feed ratio of the copolymer to HAuCl₄, and the pH value. The surface plasmon absorbance of these obtained GNPs also exhibited pH and thermal dependence because of the existence of PNIAPM and PDAMEMA blocks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Design and property of thermoresponsive core–shell fluorescent nanoparticles via RAFT polymerization and suzuki coupling reaction

The polymerization of a 2,7‐dibromocarbazole‐containing functional monomer, 6‐(2,7‐dibromo‐9H‐carbazol‐9‐yl)hexyl methacrylate (DBCzMA), was successfully carried out via the reversible addition‐fragmentation chain transfer (RAFT) technology. The polymerization behavior possessed the feature of “living”/controlled radical polymerization, for example, the first‐order kinetics, the linear increase of the molecular weight of the polymer with the monomer conversion and relatively narrow molecular weight distribution (M_w/M_n ≤ 1.27). The amphiphilic copolymers, poly(DBCzMA_m‐b‐NIPAM_n), with different chain length of poly(DBCzMA) and poly(N‐isopropylacrylamide) (PNIPAM), were successfully prepared via RAFT chain‐extension reaction, using poly(DBCzMA) as the macromolecular chain transfer agent (macro‐CTA) and NIPAM as the second monomer. Modification of 2,7‐dibromide groups in amphiphilic copolymer poly(DBCzMA‐b‐NIPAM) via Suzuki coupling reaction employed 2,7‐bis(4′,4′,5′,5′‐tetramethyl‐1′,3′,2′‐dioxaborolan‐2′‐yl)‐N?9″‐heptadecanylcarbazole as the other reaction material to afford a poly(2,7‐carbazole)‐containing crosslinked materials. The stable and uniform core–shell fluorescent nanoparticles were successfully prepared in water. The formed fluorescent nanoparticles showed good thermoresponsive properties, which is confirmed by dynamic light scattering observation. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4021–4030     

Synthesis of amphiphilic and thermoresponsive ABC miktoarm star terpolymer via a combination of consecutive click reactions and atom transfer radical polymerization

Well‐defined amphiphilic and thermoresponsive ABC miktoarm star terpolymer consisting of poly(ethylene glycol), poly(tert‐butyl methacrylate), and poly(N‐isopropylacrylamide) arms, PEG(‐b‐PtBMA)‐b‐PNIPAM, was synthesized via a combination of consecutive click reactions and atom transfer radical polymerization (ATRP). Click reaction of monoalkynyl‐terminated PEG with a trifunctional core molecule bis(2‐azidoethyl)amine, (N₃)₂? NH, afforded difunctional PEG possessing an azido and a secondary amine moiety at the chain end, PEG‐NH? N₃. Next, the amidation of PEG‐NH? N₃ with 2‐chloropropionyl chloride led to PEG‐based ATRP macroinitiator, PEG(? N₃)? Cl. The subsequent ATRP of N‐isopropylacrylamide (NIPAM) using PEG(? N₃)? Cl as the macroinitiator led to PEG(? N₃)‐b‐PNIPAM bearing an azido moiety at the diblock junction point. Finally, well‐defined ABC miktoarm star terpolymer, PEG(‐b‐PtBMA)‐b‐PNIPAM, was prepared via the click reaction of PEG(? N₃)‐b‐PNIPAM with monoalkynyl‐terminated PtBMA. In aqueous solution, the obtained ABC miktoarm star terpolymer self‐assembles into micelles consisting of PtBMA cores and hybrid PEG/PNIPAM coronas, which are characterized by dynamic and static laser light scattering, and transmission electron microscopy. On heating above the phase transition temperature of PNIPAM in the hybrid corona, micelles initially formed at lower temperatures undergo further structural rearrangement and fuse into much larger aggregates solely stabilized by PEG coronas. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4001–4013, 2009     

Synthesis and micellization of thermoresponsive galactose‐based diblock copolymers

Thermoresponsive double hydrophilic diblock copolymers poly(2‐(2′‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate)‐b‐poly(6‐O‐methacryloyl‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP) with various compositions and molecular weights were obtained by deprotection of amphiphilic diblock copolymers P(MEO₂MA‐co‐OEGMA)‐b‐poly(6‐O‐methacryloyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP), which were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization using P(MEO₂MA‐co‐OEGMA) as macro‐RAFT agent. Dynamic light scattering and UV–vis studies showed that the micelles self‐assembled from P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP were thermoresponsive. A hydrophobic dye Nile Red could be encapsulated by block copolymers P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP upon micellization and released upon dissociation of the formed micelles under different temperatures. The galactose functional groups in the PMAGP block have specific interaction with HepG2 cells, and P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP has potential applications in hepatoma‐targeting drug delivery and biodetection. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011