Surface grafting on poly(ethylene terephthalate) track‐etched microporous membrane by activation with trifluorotriazine: Application to the biofunctionalization with GRGDS peptide

A two‐step wet chemistry protocol has been developed for the surface derivatization of poly(ethylene terephthalate) (PET) track‐etched membrane used as cell culturing support, that is, (a) activation by trifluorotriazine (1 M in acetonitrile (ACN), 30 °C, 3 h); (b) coupling to amine‐terminated molecules, namely 3,5‐bis(trifluoromethyl)benzylamine ((F)Tag), (L)‐4,5‐[³H]‐lysine, and Gly‐Arg‐Gly‐Asp‐Ser (GRGDS) pentapeptide (10^?3 M in PB‐ACN, 1:1 (v/v), 20 °C, 17 h). The grafting rates determined by X‐ray photoelectron spectroscopy, from the F/C and N/C atomic ratios, are in the range of 100–140 pmol/cm² (apparent surface), whereas the liquid scintillation counting assays give higher values (180–230 pmol/cm²) corresponding to the open surface reactivity. PET‐g‐(F)Tag is reasonably stable under two usual sterilization conditions of biomaterials, that is, steam heating at 121 °C and γ‐irradiation at 25 kGy. On the other hand, PET‐g‐GRGDS is found to be stable only under ionization radiation (84% of remaining peptide molecules), but damaged in a large extent by the autoclave treatment (23% of remaining peptide molecules). The surfaces of the sterilized PET and PET‐g‐GRGDS samples have been characterized by water contact angle measurement and by atomic force microscopy analysis in air and under water. Comparatively to the corresponding nonsterilized surfaces, γ‐irradiated surfaces are slightly more hydrophilic and also slightly more rough and jagged. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 195–208, 2010     

Functionalization of polymeric surfaces by simple photoactivation of C?H bonds

A universal photoassisted pathway to functionalize polymeric surfaces is presented by transferring the inert surface sp³ C? H bonds into reactive groups, such as ? SO₃H, ? NH₂, ? SH, and ? COOH. The proposed method uses acetone as photoinitiator and different phenols with a para substituent XR as the reactants. Acetone excited by UV irradiation acts as a pair of scissors cutting both the surface C? H bonds of the polymer substrate and the O? H bonds of phenol, leading to the formation of carbon‐centered surface chain free radicals and oxygen‐centered phenoxy free radicals. By coupling of these two radicals, a variety of functional X groups with an R spacer from XR species of different phenol reactants were readily bonded to the polymeric surfaces, where phenol reactants included 4‐hydroxylbenzene sulfonic acid for ? SO₃H, p‐aminophenol and tyramine for ? NH₂, 4‐hydroxythiophenol for ? SH, and tyrosine for ? COOH. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Alternating narrow band gap copolymers derived from indeno[1,2‐b]fluorene and thiophene‐cored‐thieno[3,4‐b]pyrazine derivatives—Synthesis,characterization and comparative studies of photochemical stability

Alternating narrow band gap (NBG) conjugated polymers derived from 6,6′,12,12′‐tetraoctylindeno[1,2‐b]fluorene (IF) and 2,3‐dimethyl‐5,7‐dithien‐2‐yl‐thieno[3,4‐b]pyrazine (DTTP), 2,3‐diphenyl‐5,7‐dithien‐2‐yl‐thieno[3,4‐b]pyrazine (DPTP) or 2,3‐dioctyl‐5,7‐dithien‐2‐yl‐thieno[3,4‐b]pyrazine (DOTP), named as PIF‐DTTP, PIF‐DPTP, and PIF‐DOTP, respectively, were synthesized by Suzuki coupling reaction and characterized. The photochemical stabilities of the copolymers and copolymer derived from IF and 5,7‐dithien‐2‐yl‐thieno[3,4‐b]pyrazine (DTP) were investigated by the UV absorptions, PL spectra, FT‐IR spectra, and photovoltaic properties of the copolymers as a function of UV irradiation time. The studies revealed that the degradation of thieno[3,4‐b]pyrazine (TP) ring under UV irradiation can be retarded or eliminated by introducing phenyl group into the 2,3‐positions of TP ring, and indicated that 2,3‐diphenylthieno[3,4‐b]pyrazine could be used as durable electron deficient moiety to achieve donor–acceptor NBG‐conjugated polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and applications of a novel supramolecular polymer network with multiple H‐bonded melamine pendants and uracil crosslinkers

A conjugated main‐chain copolymer ( PBT ) consisting of bithiazole, dithieno[3,2‐b:2′,3′‐d]pyrroles (DTP), and pendent melamine units was synthesized by Stille polymerization, which can be hydrogen‐bonded (H‐bonded) with proper molar amounts of bi‐functional π‐conjugated crosslinker F (i.e., two uracil motifs covalently attached to a fluorene core through triple bonds symmetrically) to develop a novel supramolecular polymer network ( PBT/F ). The effects of multiple H‐bonds on light harvesting capabilities, HOMO levels, and photovoltaic properties of polymer PBT and H‐bonded polymer network PBT/F are investigated. The formation of supramolecular polymer network ( PBT/F ) between PBT and F was confirmed by FTIR and XRD measurements. Because of the stronger light absorption, lower HOMO level, and higher crystallinity of H‐bonded polymer network PBT/F , the solar cell device containing PBT/F showed better photovoltaic properties than that containing polymer PBT . The preliminary results show that the solar cell device containing 1:1 weight ratio of PBT/F and [6,6]‐phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) offers the best power conversion efficiency (PCE) value of 0.86% with a short‐circuit current density (J_sc) of 4.97 mA/cm², an open circuit voltage (V_oc) of 0.55 V, and a fill factor (FF) of 31.5%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and healing properties of poly(arylene ether sulfone)‐poly(alkyl disulfide) multiblock copolymers

A multiblock copolymer consisting of hard (poly(arylene ether sulfone)) and soft (poly(alkyl disulfide)) segments was successfully synthesized by oxidative coupling of the corresponding thiol‐terminated oligomers. Its structure was confirmed by ¹H and ¹³C NMR spectroscopy. The GPC data (M_w = 82,000, M_w/M_n = 2.7) and inherent viscosity (0.67 dL g⁻¹) indicated the formation of a high‐molecular‐weight multiblock copolymer, while AFM and DSC indicated a microphase‐separated morphology. Tensile testing of the multiblock copolymer films showed a large elongation at break, which is characteristic of microphase‐separated hard/soft multiblock copolymers. Over 90% of the elongation at break of damaged samples (notched or cut) was recovered by UV irradiation. The elongation recovery was proportional to the UV irradiation energy, and the high recovery was achieved by relatively weak irradiation (<170 J cm⁻²). The high content of disulfide bonds in the multiblock copolymer resulted in a lower self‐healing energy. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1358–1365     

Effects of double photoreactions on polycoumarate photomechanics

We established a polymerization condition of 3‐hydroxycinnamic acid, 3HCA, having photoreactive units over all the main chains. The polymers showed two types of photoreaction, that is, intramolecular E–Z isomerization and interchain [2 + 2] cycloaddition. Spectroscopic studies showed that the rate of the isomerization was higher than that of the cycloaddition. Although the original fiber was very brittle, the short‐time UV‐irradiation made the fiber softer and more elastic because the chain bending by the isomerization preferentially occurred. On the other hand, the long‐time irradiation made the fiber harder because of the cross‐linking by the cycloaddition, and simultaneously enhanced the elasticity. Besides we found that the cast film of P3HCA showed a photo‐bending behavior with the convex surface facing the UV‐lamp by the initial E–Z isomerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Living cationic polymerization of a coumarin‐substituted vinyl ether and reversible photoinduced crosslinking of the resulting homopolymers and amphiphilic block copolymers

Living cationic polymerization of 4‐methyl‐7‐(2‐vinyloxyethoxy)coumarin (CMVE) was achieved using SnCl₄ in the presence of nBu₄NBr as an added salt at 0 °C. The number‐average molecular weight of the resulting polymers increased in direct proportion to the monomer conversion while retaining relatively low polydispersity. Structural analysis revealed that the resulting polymers carried pendant coumarinyl moieties. These coumarinyl moieties were crosslinked by irradiation with UV light at λ_max = 366 nm, and the crosslinked sites were then cleaved by irradiation with UV light at λ_max = 254 nm. The crosslinking behaviors of the polymers were studied by UV and FTIR spectroscopic measurement. PolyCMVE was soluble in dichloromethane but was found to be insoluble upon UV light irradiation. We also synthesized amphiphilic block polymers bearing coumarinyl moieties by living cationic copolymerization with an amphiphilic vinyl ether. The resulting block polymers were soluble in an aqueous medium and also formed micelle‐like aggregates. Upon UV irradiation of aqueous solutions above the critical micelle concentration, an efficient crosslinking reaction occurred. Photoinduced structural changes of these polymer aggregates in the solution state were further investigated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and photovoltaic properties of copolymers based on bithiophene and bithiazole

Three simple structured D‐A copolymers, PBTBTz‐1 , PBTBTz‐2 , and PBTBTz‐3 , containing bithiophene (BT) donor unit and bithiazole (BTz) acceptor unit with different alkyl chain length were synthesized by the Pd‐catalyzed Stille‐coupling method. The copolymers were characterized by thermogravimetric analysis, UV–vis absorption, electrochemical cyclic voltammetry, and photovoltaic measurements. The results indicate that the introduction of BTz unit to the polythiophene main chain effectively decreases highest occupied molecular orbital levels of the copolymers and increases the open circuit voltage (V_oc) of polymer solar cells (PSCs) based on the copolymers as donor, and the alkyl chain length influences the photovoltaic properties of the polymers significantly. The PSCs based on PBTBTz‐2 and PBTBTz‐3 show higher V_oc up to 0.77 and 0.81 V, respectively. The power conversion efficiency of the PSC based on PBTBTz‐2 :PC₇₀BM = 1:1(w/w) reached 2.58% with short circuit current of 8.70 mA/cm², under the illumination of AM1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Microwave‐assisted TCNE/TCNQ addition to poly(thienyleneethynylene) derivative for construction of donor–acceptor chromophores

The alkyne moieties of poly(3‐hexylthienyleneethynylene) were reacted with tetracyanoethylene or 7,7,8,8‐tetracyanoquinodimethane by microwave irradiation to produce donor–acceptor chromophores in the polymer main chain. The resulting polymers were fully characterized by GPC, ¹H NMR, and IR spectroscopies, and elemental analyses. They were both thermally and chemically stable, as revealed by thermogravimetric analyses and ESR measurements. UV–vis‐NIR spectroscopy revealed charge‐transfer bands in the low‐energy region, and electrochemistry confirmed the narrower band gaps with the elevated HOMO and lower LUMO levels relative to the precursor polymer. To take advantage of these postfunctionalization methods, p‐type doping of the polymers with I₂ was attempted. Room temperature conductivities of the postfunctionalized polymers reached 4.5 × 10^?5 S cm^?1, which was about 10 times greater than that of the precursor polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and photochemical properties of novel pentamethylated norbornadiene containing polyimides

A novel pentamethylated norbornadiene (NBD) based dianhydride, α,α′‐bis‐(3,4,5,6,7‐pentamethylcyclopenta‐2,4‐dienyl)meta‐xylene‐1,2‐dianhydride (3), was prepared from α,α′‐bis‐(pentamethylcyclopentadienyl)meta‐xylene (1) and acetylene dicarboxylic acid. The bis‐adduct formed via Diels–Alder reaction afforded tetra‐acid (2), which was chemically cyclodehydrated to lead the targeted dianhydride (3). New polyimides containing NBD moieties in the main chain were prepared from the dianhydride monomer (3) and various aromatic diamines. The chemical structure of the polymers was confirmed by both ¹H and ¹³C NMR analysis. Their Molecular weights were also measured by SEC. All of these polyimides are soluble at room temperature in common organic solvents, such as chloroform, dichloromethane, THF, DMSO, DMF, and NMP, and show good thermal stabilities. The photochemical isomerization of the NBD into quadricyclane (QC) was investigated by UV/vis spectrophotometry from polymer films using visible sunlight as irradiation source. It was found that the kinetic rate of the conversion NBD‐QC which proceeded smoothly is a first kinetic order. The stored energies released by the transformation of QC groups into NBD ones of the irradiated polymer films were also evaluated by DSC measurement and were found to be around 90 kJ mol^?1. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Fabrication and characterization of SiO2/PVDF composite nanofiber‐coated PP nonwoven separators for lithium‐ion batteries

SiO₂/polyvinylidene fluoride (PVDF) composite nanofiber‐coated polypropylene (PP) nonwoven membranes were prepared by electrospinning of SiO₂/PVDF dispersions onto both sides of PP nonwovens. The goal of this study was to combine the good mechanical strength of PP nonwoven with the excellent electrochemical properties of SiO₂/PVDF composite nanofibers to obtain a new high‐performance separator. It was found that the addition of SiO₂ nanoparticles played an important role in improving the overall performance of these nanofiber‐coated nonwoven membranes. Among the membranes with various SiO₂ contents, 15% SiO₂/PVDF composite nanofiber‐coated PP nonwoven membranes provided the highest ionic conductivity of 2.6 × 10^?3 S cm^?1 after being immersed in a liquid electrolyte, 1 mol L^?1 lithium hexafluorophosphate in ethylene carbonate, dimethyl carbonate and diethyl carbonate. Compared with pure PVDF nanofiber‐coated PP nonwoven membranes, SiO₂/PVDF composite fiber‐coated PP nonwoven membranes had greater liquid electrolyte uptake, higher electrochemical oxidation limit, and lower interfacial resistance with lithium. SiO₂/PVDF composite fiber‐coated PP nonwoven membrane separators were assembled into lithium/lithium iron phosphate cells and demonstrated high cell capacities and good cycling performance at room temperature. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1719–1726     

Surface nanostructuring of kevlar fibers by atmospheric pressure plasma‐induced graft polymerization for multifunctional protective clothing

Atmospheric plasma‐induced graft polymerization was employed successfully to generate free radical on the surface of Kevlar® (poly‐(p‐phenylene terephthalamide or PPTA), and to initiate and control graft polymerization of cationic antimicrobial precursors diallyldimethylammonium chloride (DADMAC) or 3‐(trimethoxysilyl)propyl‐dimethyloctadecyl ammonium chloride (TMS) onto the fabric surface, which eliminates the need for separate processes that may involve thermal energy or UV irradiation. It was demonstrated that when the radiofrequency of the plasma power was 400 W, the radical density generated on the surface was 10¹⁵ to 10¹⁶ radicals cm^?2, which were enough to generate a poly‐DADMAC or poly‐TMS with surface charge of at least 2 × 10¹⁷ N⁺/cm², which is the minimum threshold for an effective cationic biocidal surface. In both cases, the grafted polymers were characterized and confirmed using SEM, FTIR, and XPS. The antimicrobial activity was measured using the AATCC Test Method 100, which showed that at least 3‐log reduction of bacteria colonies was achieved in the case of grafted poly‐DADMAC or grafted poly‐TMS on Kevlar®. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Side‐chain glycylglycine‐based polymer for simultaneous sensing and removal of copper(II) from aqueous medium

Since glycylglycine (Gly‐Gly) residue in the N‐terminal region of human prion protein, a copper binding protein, binds with Cu(II), N‐terminus Gly‐Gly side‐chain containing water soluble block copolymer was synthesized and used for simultaneous sensing and removal of Cu(II) ion from aqueous medium. The polymer has amide nitrogen atom and ester carbonyl group as potential binding sites in the side‐chain Gly‐Gly pendants. Job's plot experiment confirms 2:1 binding stoichiometry of polymer with Cu(II). This polymer is able to sense parts per billion level of Cu(II) very selectively in an aqueous medium and remove Cu(II) ions quantitatively by precipitating out the Cu(II) via complex formation in the pH range 7–9. The binding mode of polymer with Cu(II) in polymer‐Cu(II) complex was characterized by ¹H NMR, FTIR, and UV–vis spectroscopy. The attachment of Cu(II) in the polymer‐Cu(II) complex was confirmed by cyclic voltammetry experiment. Cu(II) release from the complex was achieved at pH 5 due to the protonation of amide nitrogen atoms in the Gly‐Gly moiety. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 914–921     

Annealing effect on performance and morphology of photovoltaic devices based on poly(3‐hexylthiophene)‐b‐poly(ethylene oxide)

Novel block copolymers, poly(3‐hexylthiophene)‐b‐poly(ethylene oxide) (P3HT‐b‐PEO) were synthesized via Suzuki coupling reaction of P3HT and PEO homopolymers. The copolymers were characterized by NMR, gel permeation chromatography, differential scanning calorimeter, and UV–vis measurements. A series of devices based on the block copolymers with a fullerene derivative were evaluated after thermal or solvent annealing. The device using P3HT‐b‐PEO showed higher efficiency than using P3HT blend after thermal annealing. Phase‐separated structures in the thin films of block copolymer blends were investigated by atomic force microscopy to clarify the relationship between morphologies constructed by annealing and the device performance. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of siloxane‐based urethane dimethacrylates carrying carboxylic groups and the effect of silver nanoparticles on the properties of composite polymer films

This work reports on the synthesis of three acid oligosiloxane‐urethane dimethacrylates and their use to obtain hybrid nanocomposite films, in which the presynthesized silver nanoparticles (NPs) were incorporated before photopolymerization, or produced via in situ photoreduction of the silver nitrate (AgNO₃) precursor into the formulation, without any conventional reducing agent. All samples were characterized by ¹H NMR, FT‐infrared and UV spectroscopies, photodifferential scanning calorimetry (photo‐DSC), transmission electron microscopy (TEM), and energy‐dispersive X‐ray (EDX) analysis. Fourier transformed infrared spectroscopy and photo‐DSC results showed that dimethacrylates having hydrophilic segment of poly(ethylene oxide) type in structure are more reactive than the acid oligosiloxane dimethacrylate. When another urethane dimethacrylate is taken as a comonomer, the photopolymerization rate (0.112–0.132 s^?1) and the degree of conversion (82–93%) significantly increased. Experimental evidence of the existence of nanosilver into the polymer matrix generated upon UV irradiation has been supported by UV spectroscopy, EDX and TEM analysis, the last allowing a visualization of the formation of silver NPs with size between 2 and 15 nm. Mechanical parameters and wettability of the photocrosslinked films are also discussed in the prospect of further potential applications in the biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel routes to epoxy functionalization of PHA‐based electrospun scaffolds as ways to improve cell adhesion

Straightforward and versatile routes to functionalize the surface of poly(3‐hydroxyalkanoate) (PHA) electrospun fibers for improving cell compatibility are reported under relatively mild conditions. The modification of nanofibrous PHAs is implemented through two different methodologies to introduce epoxy groups on the fiber surface: (1) preliminary chemical conversion of double bonds of unsaturated PHAs into epoxy groups, followed by electrospinning of epoxy‐functionalized PHAs blended with nonfunctionalized PHAs, (2) electrospinning of nonfunctionalized PHAs, followed by glycidyl methacrylate grafting polymerization under UV irradiation. The latter approach offers the advantage to generate a higher density of epoxy groups on the fiber surface. The successful modification is confirmed by ATR‐FTIR, Raman spectroscopy, and TGA measurements. Further, epoxy groups are chemically modified via the attachment of a peptide sequence such as Arg‐Gly‐Asp (RGD), to obtain biomimetic scaffolds. Human mesenchymal stromal cells exhibit a better adhesion on the latter scaffolds than that on nonfunctionalized PHA mats. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 816–824     

Miscibility and crystallization behavior of PBT/epoxy blends

The miscibility and the isothermal crystallization kinetics for PBT/Epoxy blends have been studied by using differential scanning calorimetry, and several kinetic analyses have been used to describe the crystallization process. The Avrami exponents n were obtained for PBT/Epoxy blends. An addition of small amount of epoxy resin (3%) leads to an increase in the number of effective nuclei, thus resulting in an increase in crystallization rate and a stronger trend of instantaneous three‐dimensional growth. For isothermal crystallization, crystallization parameter analysis showed that epoxy particles could act as effective nucleating agents, accelerating the crystallization of PBT component in the PBT/Epoxy blends. The Lauritzen–Hoffman equation for DSC isothermal crystallization data revealed that PBT/Epoxy 97/3 had lower nucleation constant K_g than 100/0, 93/7, and 90/10 PBT/Epoxy blends. Analysis of the crystallization data of PBT/Epoxy blends showed that crystallization occurs in regime II. The fold surface free energy, σ_e = 101.7–58.0 × 10^?3 J/m², and work of chain folding, q = 5.79–3.30 kcal/mol, were determined. The equilibrium melting point depressions of PBT/Epoxy blends were observed and the Flory–Huggins interaction parameters were obtained. It indicated that these blends were thermodynamically miscible in the melt. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1320–1330, 2006     

Synthesis and characterization of fluorene and cyclopentadithiophene‐based copolymers exhibiting broad absorption for photovoltaic devices

In this study, two low bandgap copolymers composed of fluorene (Fl), cyclopentadithiophene (CDT), and 4,7‐bis(2‐thienyl)‐2,1,3‐benzothiadiazole (DBT) were synthesized, and their optical, electrochemical, and photovoltaic (PV) characteristics were investigated for applications in PV devices. The feed ratio of the Fl and CDT moieties was modulated to tune the electronic structures and resulting optical properties of the polymers. In the copolymeric structures, the Fl‐CDT unit absorbs the short‐wavelength UV/vis regions, and the CDT‐DBT (or Fl‐DBT) unit with strong intramolecular charge transfer characteristics covers the long‐wavelength visible regions. P1 exhibited a wide UV absorption spectrum covering the UV and entire visible region in the range of 300–800 nm, and P2 showed absorption covering from 300 to 700 nm. UV/vis and electrochemical studies confirmed the desirable highest occupied molecular orbital/lowest unoccupied molecular orbital levels of the copolymers with bandgaps of 1.62–1.86 eV, enabling efficient electron transfer and a high open‐circuit voltage when blending them with fullerene derivatives. When the polymers were blended with [6,6]phenyl‐C₆₁‐butyric acid methyl ester, P1 exhibited the best device performance with an open‐circuit voltage of 0.66 V, short‐circuit current of 4.92 mA cm^?2, and power conversion efficiency of 1.13% under Air Mass 1.5 Global (AM 1.5G, 100 mW cm^?2) illumination. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thermosensitive gel formation of novel polypeptides containing a collagen‐derived Pro‐Hyp‐Gly sequence and an elastin‐derived Val‐Pro‐Gly‐Val‐Gly sequence

A triple‐helix‐forming collagen model peptide, (prolyl‐trans‐4‐hydroxyprolyl‐glycyl)₁₀ [(Pro‐Hyp‐Gly)₁₀], and a thermosensitive elastin‐derived pentapeptide, valyl‐prolyl‐glycyl‐valyl‐glycyl (Val‐Pro‐Gly‐Val‐Gly), were copolymerized in various mole ratios using 1‐ethyl‐3‐(3‐dimethylaminopropyl)‐carbodiimide hydrochloride and 1‐hydroxybenzotriazole in dimethyl sulfoxide at 20 °C. All of the obtained polypeptides have molecular weight higher than 10³ and contain a triple‐helical structure, and showed an inverse phase transition from transparent solution to turbid suspension in response to a rise in temperature. The lower critical solution temperature of the polypeptide solution decreased upon increasing the content of Val‐Pro‐Gly‐Val‐Gly. Furthermore, polypeptides containing 82–86 mol % of Val‐Pro‐Gly‐Val‐Gly in composition showed reversible gel formation, suggesting that (Pro‐Hyp‐Gly)₁₀ acts as a hydrated unit and Val‐Pro‐Gly‐Val‐Gly acts as a thermosensitive crosslinking point. These biodegradable thermosensitive polypeptides may be useful for biomedical applications, including, as a scaffold for tissue regeneration. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6048–6056, 2005     

pH and temperature responsiveness in AgNPs stabilized by a new poly(vinylidene fluoride) random graft copolymer

Poly(vinylidene fluoride)(PVDF)‐graft‐random copolymers(PD) of diethyleneglycol methylether methacrylate(MeO₂MA) and dimethylaminoethyl methacrylate(DMAEMA) are synthesized by a combined atom transfer radical coupling and atom transfer radical polymerization technique at three different co‐monomer compositions. The molar ratio of MeO₂MA to DMAEMA in PD are measured to be 1:5.8, 1:1.3, and 1:0.5 for PD1, PD2, and PD3 graft copolymers. In PD2 the feed ratio and mole ratio are same indicating an azeotropic composition causing highest yield (89%) and highest molecular weight (9.29 × 10⁵). The grafted chains of PD are temperature and pH responsive and in basic pH they show a sudden increase in size above certain temperature for LCST‐type phase transition, however, this is not observed at pH 4 and 7. PD can generate AgNPs under UV irradiation and morphology of PD at 30 °C varies with pH from vesicle to nanosphere. The AgNPs lie on the surface of the vesicles or assemble with the PD chains forming nanosphere morphology. At different pH, PD samples exhibit plasmon peaks at different wavelengths attributed to various size, shapes and cluster formation. The UV–vis spectra of AgNPs stabilized by PD1 and PD2 samples exhibits similar LCST‐type phase transition as observed above, but that of PD3 does not show any such transition. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 960–970