Nucleophile‐electrophile interactions in the reaction of oxiranes with carboxylic acids in the presence of tertiary amines

The nucleophile‐electrophile interactions in the reaction system “N,N‐dimethylaniline – acetic acid – epichlorohydrin” have been investigated using kinetic methods and computer modeling. The observed orders of reactions have been determined for the overall reaction as well as for individual stages. The kinetic equations have been proposed; the activation parameters of the reactions have been evaluated. The behavior of the initial (amine) and intermediate (carboxylate) nucleophiles has been detailed in reaction pathway. Amine reacts with oxirane activated by acidic reagent while carboxylate‐anion—with both activated and nonactivated epichlorohydrin. The mechanism of oxirane ring opening by acid reagent in the presence of tertiary amine has been proposed, which comprise parallel‐consecutive compensation stages of reaction product formation. It has been demonstrated that the observed reaction order with respect to acid reactant depends upon the nature of electrophilic reagent (activated/nonactivated oxirane) and the ratio of the rates of compensation stages.     

Hydrolysis and retro‐aldol cleavage of ethyl threo‐2‐(1‐adamantyl)‐3‐hydroxybutyrate: competing reactions

The hydrolysis of ethyl threo‐2‐(1‐adamantyl)‐3‐hydroxybutyrate ( 1 ) and the parent ester ethyl 3‐hydroxybutyrate ( 4 ) has been studied experimentally and computationally. In the hydrolysis of threo‐ester 1 with 2 M NaOH, predominantly retro‐aldol product was observed, whereas the hydrolyzed product was present in a minor amount. When the reaction is carried out under the same conditions with the parent ester ethyl 3‐hydroxybutyrate ( 4 ), hydrolyzed product is exclusively observed. The competitive pathways, namely hydrolysis and the retro‐aldol reaction for 1 and 4 were investigated using DFT calculations in the both gas and solvent phase. The calculated results in the solvent phase at B3LYP/6–31 + G* level revealed that the formation of retro‐aldol products is kinetically preferred over the hydrolysis of threo‐ester 1 in the presence of a base. However, the parent ester 4 showed that the retro‐aldol process is less favored than the hydrolysis process under similar conditions. The steric effect imposed by the bulky adamantyl group to enhance the activation barriers for the hydrolysis of the ethyl threo‐2‐(1‐adamantyl)‐3‐hydroxybutyrate ( 1 ) was further supported by the calculations performed with tert‐butyl group at the α‐carbon atom of ethyl 3‐hydroxybutyrate ( 7 ). Copyright © 2010 John Wiley & Sons, Ltd.     

A computational study into the reactivity of epichlorohydrin and epibromohydrin under basic conditions in the gas phase and solution

Ab initio molecular orbital calculations were carried out on epibromohydrin (EBH) and epichlorohydrin (ECH) in an attempt to elucidate their reactivity with respect to a hard nucleophile, hydroxide. These systems were modeled in both the gas phase and a polar solvent under basic conditions. In the gas phase, it was determined that a direct displacement mechanism (nucleophilic attack at the C1 position) was operative for EBH, while an indirect pathway (nucleophilic attack at the C3 position and subsequent intramolecular displacement) was followed for ECH. In an acetone solution, only the indirect displacement mechanism was found to occur. An electrostatic argument is advanced to account for this behavior in polar solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Reversible formation of aryloxenium ions from the corresponding quinols under acidic conditions

Quinols, 1, are products of the hydration of O‐aryloxenium ions, 2, and N‐arylnitrenium ions, 3, and they are being investigated for medical uses. Under acidic conditions (pH 1–3) kinetics and products of Br^– trapping demonstrate that 1a, 4‐phenyl‐4‐hydroxy‐2,5‐cyclohexadienone, and 1b, 4‐p‐tolyl‐4‐hydroxy‐2,5‐cyclohexadienone, generate the corresponding oxenium ions 2a and 2b, respectively, as steady‐state intermediates. Formation and trapping of the oxenium ions occurs in competition with the acid catalyzed dienone–phenol rearrangement. Because oxenium ion formation is reversible, the ion can only be detected by trapping with a nucleophile. Br^– is an efficient trap under acidic conditions because, unlike N₃^–, it is not protonated under those conditions. Attempts to detect the oxenium ions 2a and 2b at pH 4.6 and 7.1 with N₃^– were unsuccessful indicating that oxenium ion formation only occurs under acidic conditions. The oxenium ion 2c could not be detected under acidic conditions from the quinol 1c, 4‐(benzothiazol‐2‐yl)‐4‐hydroxy‐2,5‐cyclohexadienone, by Br^– trapping methods, even though this ion can be detected during hydrolysis of the corresponding ester, 4c. Although the benzothiazol‐2‐yl group is a resonance electron donor that is capable of stabilizing an O‐aryloxenium ion, it is also a strong inductive electron withdrawing group that hinders the formation of 2c from 1c by decreasing the extent of protonation of 1c to generate 1cH⁺ and by destabilizing the transition state for ionization of 1cH⁺. Generation of an oxenium ion from the corresponding quinol is feasible under acidic conditions as long as the 4‐substituent of the quinol is both a resonance and inductive electron donor. Copyright © 2012 John Wiley & Sons, Ltd.     

Molecular structure and vibrational spectra of 3 (or 4 or 6)‐methyl‐5‐nitro‐2‐pyridinethiones: FT‐IR,FT‐Raman and DFT quantum chemical calculations

IR and Raman spectra (RS) of polycrystalline 3‐(or 4 or 6)‐methyl‐5‐nitro‐2‐pyridinethione have been measured and analyzed by means of density functional theory (DFT) quantum chemical calculations. The B3LYP/6‐311G(2d,2p) approach has been applied for both the thiol and thione tautomers due to the possibility of the formation of these two thiole forms. Molecular structures of these compounds have been optimized starting from different molecular geometries of the thiol group and thione group. Two conformations of the 2‐mercaptopyridine, trans and cis, have been taken into account. It was shown that the studied compounds appear in the solid state in the thione form. The effect of the hydrogen‐bond formation in the studied compounds has been considered. Copyright © 2008 John Wiley & Sons, Ltd.     

Experimental (FT‐IR) and theoretical (DFT) studies on prototropy and H‐bond formation for pyrazine‐2‐amidoxime

The results of the first structural studies (with the use of both experimental and theoretical methods) on pyrazine‐2‐amidoxime (PAOX) were shown and discussed. FT‐IR spectra were recorded in different concentrations of the PAOX in apolar solvent to check the possibility of the inter‐ or intramolecular hydrogen‐bond formation. All possible tautomers–rotamers of PAOX were then theoretically considered at the DFT(B3LYP)/6‐311+G** level in vacuo. For selected isomers, calculations were also performed at higher levels of theory {B3LYP/6‐311+G(3df,2p) and G3B3}. Based on the results of DFT calculations, the most stable isomers were found, and their total free energies and infrared spectra were calculated. The energy variation plots for the N8?C7?N9?O10 and N1?C2?C7?N9 dihedral angles were also computed to find two energy barriers, one for E/Z isomerization around the C7?N9 double bond and the other one for rotation of the pyrazinyl ring around the C2?C7 single bond. The results show that the stability of the PAOX isomers strongly depend on their configuration and orientation of the substituents. The possibilities of inter‐ and intramolecular hydrogen bonds were also experimentally and theoretically checked. Finally, a potential of mean force was determined in CHCl₃ for a dimer of PAOX with hexamethylphosphoramide. Both, experimental and theoretical results are in agreement. Copyright © 2016 John Wiley & Sons, Ltd.     

Hydrolytic reactions of cyclic bis(3′‐5′)diadenylic acid (c‐di‐AMP)

Hydrolytic reactions of cyclic bis(3′‐5′)diadenylic acid (c‐di‐AMP) have been followed by Reversed phase high performance liquid chromatography (RP‐HPLC) over a wide pH range at 90 °C. Under neutral and basic conditions (pH ≥ 7), disappearance of the starting material (first‐order in [OH^?]) was accompanied by formation of a mixture of adenosine 2′‐monophosphate and 3′‐monophosphate (2′‐AMP and 3′‐AMP). Under very acidic conditions (from H₀ = ?0.7 to 0.2), c‐di‐AMP undergoes two parallel reactions (first‐order in [H⁺]): the starting material is cleaved to 2′‐AMP and 3′‐AMP and depurinated to adenine (i.e., cleavage of the N‐glycosidic bond), the former reaction being slightly faster than the latter one. At pH 1–3, isomerization to cyclic bis(2′‐5′)diadenylic acid competes with the depurination. Copyright © 2012 John Wiley & Sons, Ltd.     

On the structure of 3‐acetylamino‐5‐methyl‐1,2,4‐oxadiazole and on the fully degenerate rearrangements (FDR) of its anion: a stimulating comparison between the results of ‘in‐silicon chemistry’ and ‘laboratory chemistry’

An accurate crystal structure determination has provided evidence for a planar conformation for 3‐acetylamino‐5‐methyl‐1,2,4‐oxadiazole ( 5 ), in agreement with quantum‐mechanical calculations in the gas phase. In the crystal, a series of strong intermolecular N7H7^….O9 hydrogen bonds link the amido groups of different molecules, causing the formation of infinite parallel ordered chains. The effect of the DMSO solvent on the energy and charge distribution of compound 5 and on its relevant 5 ^? anion, involved in a fully degenerate rearrangement (FDR), has been deepened by quantum‐mechanical DFT calculations. The calculated energy barrier for the FDR increases in going from in vacuo to DMSO, in agreement with previsions based on the Hughes and Ingold rules concerning the nucleophilic substitution of an anionic reagent (the deprotonated amido group in the side chain) on a neutral substrate (the 1,2,4‐oxadiazole ring). Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of additional metal ions on the ratio of the rates of intermediate product transformations in the hydrolysis of adenizine-5′-triphosphoric acid catalyzed by divalent Cu ions

It was shown earlier that the hydrolysis of the (CuATP²⁻)₂ dimeric complex to CuADP⁻ and inorganic phosphate P _i was an irreversible reaction. The main intermediate hydrolysis product, the formation of which should be taken into account at comparatively early hydrolysis stages, was the IntK pentacovalent intermediate. It was formed in parallel with hydrolysis to CuADP⁻ and P _i through the common intermediate product (CuATP²⁻)₂OH⁻ — DOH⁻. We studied the influence of the addition of various concentrations of Mg²⁺ ions to the reaction mixture at pH 7.1–7.2, a range for which the kinetics of hydrolysis is sensitive to the rate constants of deactivation of DOH⁻ active centers (conjugated with CuADP⁻ formation and occurring via the formation of IntK). The conversion of ATP above which stationary hydrolysis regime was observed decreased as the concentration of Mg²⁺ grew. The DOH⁻ $ \underset{{OH^ - }}{\overset{{OH^ - }}{\longleftrightarrow}}$ \underset{{OH^ - }}{\overset{{OH^ - }}{\longleftrightarrow}} IntK equilibrium according to the conversion of ATP was established more rapidly, and it was to a greater extent shifted toward IntK. It was assumed that hydrated Mg²⁺ linked as a second metal ion with ATP β and γ phosphate groups hydrated IntK much stronger than DOH⁻. The Cu · OH₂ · AMP complex played the role of a common acid catalyst and hydrated DOH⁻ better than Mg²⁺ · OH₂. The selective hydration of DOH⁻ by the CuOH₂ · AMP complex at early hydrolysis stages directed the process toward the formation of IntK, which caused the appearance of an induction period in the formation of CuADP⁻.     

A computational study of stereospecifity in the thermal elimination reaction of menthyl benzoate in the gas phase

This paper reports a theoretical study, at the B3LYP/6–31 + G(d,p) and M05‐2X/6–31G + (d,p) levels, on the thermal decomposition of menthyl benzoate (2‐isopropyl‐5‐methylcyclohexyl benzoate). It undergoes a unimolecular first‐order elimination to give 3‐menthene (1‐isopropyl‐4‐methylcyclohexene), 2‐menthene (3‐isopropyl‐6‐methylcyclohexene), and benzoic acid. We studied two possible mechanisms trying to explain the formation of 2‐ and 3‐menthene, via six‐membered or four‐membered cyclic transition states. Rate constants were calculated at two temperatures, 587.1 and 598.6 K, and they agree well with the experimentally determined values. We verify that 3‐menthene is the product mainly formed at both temperatures. The progress of the reactions has been followed by means of the Wiberg bond indices. Intrinsic reaction coordinate (IRC) calculations have been carried out to verify that the localized transition state structures connect with the reactants and products and also to verify that the parent compound, menthyl benzoate, is taking the cis‐configuration needed in the reaction. Copyright © 2009 John Wiley & Sons, Ltd.     

Experimental and theoretical push‐pull Chemo‐ and regioselectivity in 1,3‐Dipolar cycloaddition reactions: the case of benzotriazepin‐5‐one with mesitylnitrile oxide

A novel heterocyclic compound 3‐mesityl‐5‐methyl‐4,5,11,11a‐tetrahydro‐6H‐[1,2,4]oxadiazolo [5,4‐b][1,3,4]benzotriazépin‐6‐one 4 has been synthesised by a 1,3 dipolar cycloaddition (13DC) reaction of 1,3,4‐benzotriazepin‐5‐one 1 with mesitylnitrile oxide 3 . The reaction, beside its synthetic interest, has shown to be completely chemo‐ and regioselective. The structure of the compound was determined by X‐ray crystallography and analysed by spectral methods (NMR and mass spectrometry). The molecular mechanism for the reaction has been studied using quantum mechanical calculations at the B3LYP/6‐31G* theory level. Two mechanisms are possible for the formation of the cycloadduct 4 . The first one involves a 13DC reaction between 1 , as dipolarophile and 3 , as dipole. Analysis of the results indicates that it takes place along asynchronous concerted bond‐formation process with a very low polar character. The regioselectivity obtained from the calculations are in complete agreement with the unique formation of the cycloadduct 4 . The second mechanism is initiated by the nucleophilic attack of the N3 nitrogen of the tautomer form of 2 , to the C5 carbon of the nitrile oxide 3 to yield an amidoxime. However, the large energy involved in this addition prevents this mechanism. The large energy difference between the tautomers 1 and 2 , makes that only the C?N site of benzotriazepin‐5‐one 1 could act as a dipolarophile site. This fact makes the 13DC reaction to be chemoselective. The analysis of global electrophilicity of the reagents allows explaining the low polar character of these 13DC reactions. Copyright © 2007 John Wiley & Sons, Ltd.     

Morphine studied by vibrational spectroscopy and DFT calculations

Morphine is a highly potent opiate analgesic drug considered to be the prototypical opioid. It is metabolized in the body to morphine‐3‐O‐glucuronide, which is antagonistic to the analgesic effects of the drug. Other forms of morphine of biological activity are salts used in medical dosing. In order to investigate morphine, its metabolite and salts and as well as pharmaceutical product, Fourier transform (FT) infrared and Raman spectroscopy were used. Experimental spectra of morphine were interpreted with the help of quantum‐chemical calculations performed at the B3LYP/6‐311 + + G(d,p) level. The results presented in this study provide clear evidence of the benefits of Raman and IR spectroscopy in alkaloid analysis, which can be used for efficient quality control, forensic analysis and analytical chemistry. Copyright © 2011 John Wiley & Sons, Ltd.     

Can tetra‐tert‐butylethylene be formed by ion–ion recombination or ion–molecule reaction of two di‐tert‐butylcarbene units?—a DFT study

The reaction channels of di‐tert‐butylcarbene ( 2 ), its radical anion, ( 3 ) and its radical cation ( 4 ) were investigated theoretically by using DFT/B3LYP with 6‐31+G(d) basis set and 6‐311+G(2d,p) for single point energy calculations. Conversion of the neutral carbene 2 to the charged species 3 and 4 results in significant geometric changes. In cation 4 two different types of C? (CH₃)₃ bonds are observed: one elongated sigma bond called “axial” with 1.61 Å and two normal sigma bonds with a bond length of 1.55 Å. Species 2 and 4 have an electron deficient carbon center; therefore, migration of CH₃ and H is observed from adjacent tert‐butyl groups with low activation energies in the range of 6–9 kcal/mol like similar Wagner–Meerwein rearrangements in the neopentyl‐cation system. Neutral carbene 2 shows C? H insertion to give a cyclopropane derivative with an activation energy of 6.1 kcal/mol in agreement with former calculations. Contrary to species 2 and 4 , the radical anion 3 has an electron rich carbon center which results in much higher calculated activation energies of 26.3 and 42.1 kcal/mol for H and CH₃ migrations, respectively. NBO charge distribution indicates that the hydrogen migrates as a proton. The central issue of this work is the question: how can tetra‐tert‐butylethylene ( 1 ) be prepared from reaction of either species 2 , 3 , or 4 as precursors? The ion–ion reaction between 3 and 4 to give alkene 1 with a calculated reaction enthalpy of 203.5 kcal/mol is extremely exothermic. This high energy decomposes alkene 1 after its formation into two molecules of carbene 2 spontaneously. Ion–molecule reaction of radical anion 3 with the neutral carbene 2 is a much better choice: via a proper oriented charge–transfer complex the radical anion of tetra‐tert‐butylethylene (11) is formed. The electron affinity of 1 was calculated to be negligible. Copyright © 2010 John Wiley & Sons, Ltd.     

Resonance Raman spectroscopic and density functional theory investigation of the excited state structural dynamics of 2‐mercapto‐1‐methylimidazole

The resonance Raman spectroscopy in conjunction with the density functional theory calculations were used to study the excited state structural dynamics of 2‐mercapto‐1‐methylimidazole (MMI). The experimental UV absorption bands were assigned according to the time‐dependent density functional calculations. The vibrational assignments were done for the A‐band resonance Raman spectra of MMI in water and acetonitrile on the basis of the Fourier transform infrared (FT‐IR) and FT‐Raman measurements in solid, in water and in acetonitrile and the corresponding B3LYP/6‐311+G(d, p) computations. The dynamic structures of MMI were obtained by analysis of the resonance Raman intensity pattern and normal mode analysis. The differences in the dynamic structures of MMI and thiourea were revealed and explained. The structural dynamic of MMI was found to be similar to that of 2‐thiopyrimidone in terms of major reaction coordinates and thus favored the intra‐molecular proton transfer reaction. Copyright © 2012 John Wiley & Sons, Ltd.     

X‐ray‐Raman‐scattering‐based EXAFS beyond the dipole limit

X‐ray Raman scattering (XRS) provides a bulk‐sensitive method of measuring the extended X‐ray absorption fine structure (EXAFS) of soft X‐ray absorption edges. Accurate measurements and data analysis procedures for the determination of XRS‐EXAFS of polycrystalline diamond are described. The contributions of various angular‐momentum components beyond the dipole limit to the atomic background and the EXAFS oscillations are incorporated using self‐consistent real‐space multiple‐scattering calculations. The properly extracted XRS‐EXAFS oscillations are in good agreement with calculations and earlier soft X‐ray EXAFS results. It is shown, however, that under certain conditions multiple‐scattering contributions to XRS‐EXAFS deviate from those in standard EXAFS, leading to noticeable changes in the real‐space signal at higher momentum transfers owing to non‐dipole contributions. These results pave the way for the accurate application of XRS‐EXAFS to previously inaccessible light‐element systems.     

Electroless plating of copper on surface-modified glass substrate

This work focuses on developing a novel convenient method for electroless copper deposition on glass material. This method is relied on the formation of amino (NH₂)-terminated film on the surface of glass substrate, by coating polyethylenimine (PEI) on glass matrix and using epichlorohydrin (ECH) as cross-linking agent. The introduced amino groups can effectively adsorb the palladium, the catalysts which could initiate the subsequent Cu electroless plating, onto the glass substrate surface. Finally, a copper film is formed on the palladium-activated glass substrate through copper electroless plating and the surface-coppered glass material is therefore acquired. X-ray diffraction (XRD), atomic force microscope (AFM), scanning electron microscopy (SEM) images combined with energy diffraction X-ray (EDX) analysis demonstrate the successful copper deposition on the surface of glass substrate.     

Theoretical calculations of the kinetics and mechanisms of the gas phase elimination of primary,secondary, and tertiary 2‐hydroxyalkylbenzenes

Theoretical study of the elimination kinetics of 2‐phenylethanol, 1‐phenyl‐2‐propanol, and 2‐methyl‐1‐phenyl‐2‐propanol in the gas‐phase has been carried out at the MP2/6‐31G(d,p), B3LYP/6‐31G(d,p), B3LYP/6‐31++G(d,p), MPW1PW91/6‐31G(d,p), MPW1PW91/6‐31++G(d,p), PBEPBE/6‐31G(d,p), and PBEPBE/6‐31++G(d,p) levels of theory. The three substrates undergo two parallel elimination reactions. The first elimination appears to proceed through a six‐membered cyclic transition state to give toluene and the corresponding aldehyde or ketone. The second parallel elimination takes place through a four‐membered cyclic transition state producing water and the corresponding unsaturated aromatic hydrocarbon. Results from MP2/6‐31G(d,p) and MPW1PW91/6‐31++G(d,p) methods were found to be in good agreement with the experimental kinetic and thermodynamic parameters in the formation of toluene and the corresponding carbonyl compound. However, the results for PBEPBE/6‐31G(d,p) were in better agreement with the experimental data for the second parallel reaction yielding water and the corresponding unsaturated aromatic hydrocarbon. The charge distribution differences in the TS related to the substitution by methyl groups in the substrates can account for the observed reaction rate coefficients. The synchronicity parameters imply semi‐polar transition states for these elimination reactions. Copyright © 2009 John Wiley & Sons, Ltd.     

DFT simulations and vibrational analysis of FTIR and FT‐Raman spectra of 2‐amino‐4,6‐dihydroxypyrimidine

This work deals with the vibrational spectroscopy of 2‐amino‐4,6‐dihydroxy pyrimidine (ADHP) by means of quantum chemical calculations. The mid‐ and far FTIR and FT‐Raman spectra were measured in the condensed state. The fundamental vibrational wavenumbers and intensity of vibrational bands were evaluated using density functional theory (DFT) with the standard B3LYP/6‐311 + G** methods and basis set combinations, and were scaled using various scale factors, which yielded good agreement between the observed and calculated wavenumbers. The vibrational spectra were interpreted with the aid of normal coordinate analysis based on the scaled density functional force field. The results of the calculations were applied to simulate the infrared and Raman spectra of the title compound, which showed excellent agreement with the observed spectra. Copyright © 2008 John Wiley & Sons, Ltd.     

Micellar effects on aromatic nucleophilic substitution by the ANRORC mechanism. Hydrolysis of 2‐chloro‐3,5‐dinitropyridine

The hydrolysis of 2‐chloro‐3,5‐dinitropyridine by sodium hydroxide in the presence of micelles of cetyltrimethylammonium bromide (CTABr), cetyltrimethylammonium chloride (CTACl) and sodium dodecyl sulfate (SDS) has been studied. The reaction follows a consecutive reaction path involving the formation of a long‐lived intermediate 3 and finally giving the product, 3,5‐dinitro 2‐pyridone 2 . The mechanism follows an addition of the nucleophile, ring opening and ring closure (ANRORC) reaction path. The rate constant was observed to be first‐order dependent on [OH^?]. The rate of reaction increased on increasing [CTABr] and, after reaching to the maxima, it started decreasing. The anionic SDS micelles inhibited the rate of hydrolysis. The results of the kinetic experiments were treated with the help of the pseudophase ion exchange model and the Menger–Portnoy model. The added salts, viz. NaBr, Na‐toluene‐4‐sulphonate, and (CH₃)₄NBr on varying [CTACl] and [SDS] inhibited the rate of reaction. The various kinetic parameters in the presence and absence of salts were determined and are reported herewith. Copyright © 2011 John Wiley & Sons, Ltd.     

Surface anchoring mode‐dependent hydrolysis reactions of hydrazone groups on gold examined by pH‐dependent Raman spectroscopy

We conducted a comparative study of the pH‐dependent anchoring behaviors of 3‐methyl‐2‐benzothiazolinone hydrazone (3M2BH) and benzophenone hydrazone (BPH) on gold nanoparticles (AuNPs) by means of interfacial Raman spectroscopy. We found that several bands of 3M2BH in the highly alkaline pH region disappeared as the colloidal conditions became more neutral and acidic. The vibrational band at 919, 1174, and 1222 cm⁻¹ at pH 10.0 disappeared below pH 9.2, which may be because of the hydrolysis reactions that cleave the labile N―NH₂ group of 3M2BH, indicating a rather perpendicular orientation via the sulfur atom at the surfaces. A fairly high transition pH value was assumed to be because of the interaction of the N―NH₂ group in the vicinity of the surfaces. Several characteristic bands, including 1584 and 1617 cm⁻¹, also exhibited different intensities, suggesting that the adsorbates on Au surfaces underwent structural transformations of the N―NH₂ group after the pH value became neutral or acidic. These changes were not observed for BPH, presumably because of the direct and robust binding of the hydrazone onto Au surfaces. Our results revealed that the pH‐dependent cleavage reactions may vary depending on the surface anchoring modes of the adsorbates. Copyright © 2015 John Wiley & Sons, Ltd.