Proline-Specific Extracellular Aminopeptidase Purified from <Emphasis Type="Italic">Streptomyces lavendulae</Emphasis>

Aminopeptidases catalyze the cleavage of specific amino acids from the amino terminus of protein or peptide substrates. A proline-specific aminopeptidase was purified to homogeneity from the culture-free extract of Streptomyces lavendulae ATCC 14162 in sequential steps comprising ammonium sulfate precipitation, ultra-filtration, and column chromatography on Q-sepharose and Sephadex G-100. The purified protein showed approximately 60 kDa in SDS-PAGE and was optimally active at pH 6.5 and 40 °C. Kinetic studies showed a K _m and V _max of 0.23 mM and 0.087 μmol/min, respectively, using Pro-p-NA, the substrate with maximum specificity. Enzyme activity was inhibited by PMSF and ions like Zn²⁺, Co²⁺, and Ni²⁺. However, unlike other aminopeptidases, the activity was enhanced in the presence of DTT, 1,10-phenanthroline, EDTA, amastatin, and bestatin. Ions like Ca²⁺, Mg²⁺, and Mn²⁺ also enhanced the activity.     

Thermodynamics and Kinetics of Heat Inactivation of a Novel Keratinase from Chryseobacterium sp. Strain kr6

A novel keratinase from Chryseobacterium sp. strain kr6 was purified to homogeneity by (NH₄)₂SO₄ precipitation, gel permeation on Sephadex G-100, and Q-Sepharose Fast Flow anion-exchange chromatography. The molecular weight of the purified enzyme was around 20 kDa. Kinetic and thermodynamic parameters for thermal inactivation were determined. The influence of Ca²⁺ and Mg²⁺ ions and purification degree on the enzyme stability was evaluated in the range of 50 to 60 °C. The results showed that first-order kinetics explained well the thermal denaturation of the keratinase in this temperature interval. The presence of Ca²⁺ increases significantly the enzyme stability. Compared with the controls, the half-life of the purified enzyme after two purification steps in the presence of Ca²⁺ increased 7.3, 20.2, and 9.8 fold at 50, 55, and 60 °C, respectively. Thermodynamics parameters for thermal inactivation were also determined.     

Purification and Characterization of a Novel Heparin Degrading Enzyme from <Emphasis Type="Italic">Aspergillus flavus</Emphasis> (MTCC-8654)

A heparinase-producing fungus was isolated, and the strain was taxonomically characterized as Aspergillus flavus by morphophysiological and 26S rRNA gene homology studies. The culture produced intracellular heparinase enzyme, which was purified 40.5-fold by DEAE-Sephadex A-50, CM-Sephadex C-50, and Sephadex G-100 column chromatography. Specific activity of the purified enzyme was found to be 44.6 IU/μg protein and the molecular weight of native as well as reduced heparinase was 24 kDa, showing a monomeric unit structure. Peptide mass spectrum showed poor homogeneity with the database in the peptide bank. The enzyme activity was maximum at 30 °C in the presence of 300 mM NaCl at pH 7.0. In the presence of Co²⁺, Mn²⁺ ions, and reducing agents (β-mercaptoethanol, dithiothreitol), enzyme activity was enhanced and inhibited by iodoacetic acid. These observations suggested that free sulfohydryl groups of cysteine residues were necessary for catalytic activity of the enzyme. The enzyme was also inhibited by histidine modifier, DEPC, which suggests that along with cysteine, histidine may be present at its active site. The enzyme showed a high affinity for heparin as a substrate with K _m and V _max as 2.2 × 10⁻⁵ M and 30.8 mM min⁻¹, respectively. The affinity of the enzyme for different glycosaminoglycans studied varied, with high substrate specificity toward heparin and heparin-derived polysaccharides. Depolymerization of heparin and fractionation of the oligosaccharides yielded heparin disaccharides as main product.     

Gene Cloning,Heterologous Expression,and Characterization of a High Maltose-Producing α-Amylase of <Emphasis Type="Italic">Rhizopus oryzae</Emphasis>

A putative α-amylase gene, designated as RoAmy, was cloned from Rhizopus oryzae. The deduced amino acid sequence showed the highest (42.8%) similarity to the α-amylase from Trichoderma viride. The RoAmy gene was successfully expressed in Pichia pastoris GS115 under the induction of methanol. The molecular weight of the purified RoAmy determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis was approximately 48 kDa. The optimal pH and temperature were 4–6 and 60 °C, respectively. The enzyme was stable at pH ranges of 4.5–6.5 and temperatures below 50 °C. Purified RoAmy had a K _m and V _max of 0.27 mg/ml and 0.068 mg/min, respectively, with a specific activity of 1,123 U/mg on soluble starch. Amylase activity was strongly inhibited by 5 mM Cu²⁺ and 5 mM Fe²⁺, whereas 5 mM Ca²⁺ showed no significant effect. The RoAmy hydrolytic activity was the highest on wheat starch but showed only 55% activity on amylopectin relative to soluble corn starch, while the pullulanase activity was negligible. The main end products of the polysaccharides tested were glucose and maltose. Maltose reached a concentration of 74% (w/w) with potato starch as the substrate. The enzyme had an extremely high affinity (K _m = 0.22 mM) to maltotriose. A high ratio of glucose/maltose of 1:4 was obtained when maltotriose was used at an initial concentration of 40 mM.     

Purification and Biochemical Characterization of a Highly Thermostable Xylanase from <Emphasis Type="Italic">Actinomadura</Emphasis> sp. Strain Cpt20 Isolated from Poultry Compost

An extracellular thermostable xylanase from a newly isolated thermophilic Actinomadura sp. strain Cpt20 was purified and characterized. Based on matrix-assisted laser desorption–ionization time-of-flight mass spectrometry analysis, the purified enzyme is a monomer with a molecular mass of 20,110.13 Da. The 19 residue N-terminal sequence of the enzyme showed 84% homology with those of actinomycete endoxylanases. The optimum pH and temperature values for xylanase activity were pH 10 and 80 °C, respectively. This xylanase was stable within a pH range of 5–10 and up to a temperature of 90 °C. It showed high thermostability at 60 °C for 5 days and half-life times at 90 °C and 100 °C were 2 and 1 h, respectively. The xylanase was specific for xylans, showing higher specific activity on soluble oat-spelt xylan followed by beechwood xylan. This enzyme obeyed the Michaelis–Menten kinetics, with the K _m and k _cat values being 1.55 mg soluble oat-spelt xylan/ml and 388 min⁻¹, respectively. While the xylanase from Actinomadura sp. Cpt20 was activated by Mn²⁺, Ca²⁺, and Cu²⁺, it was, strongly inhibited by Hg²⁺, Zn²⁺, and Ba²⁺. These properties make this enzyme a potential candidate for future use in biotechnological applications particularly in the pulp and paper industry.     

Characterization of Cyclodextrin Glucanotransferase Produced by <Emphasis Type="Italic">Bacillus megaterium</Emphasis>

Cyclodextrin glucanotransferase, produced by Bacillus megaterium, was characterized, and the biochemical properties of the purified enzyme were determined. The substrate specificity of the enzyme was tested with different α-1,4-glucans. Cyclodextrin glucanotransferase displayed maximum activity in the case of soluble starch, with a K _m value of 3.4 g/L. The optimal pH and temperature values for the cyclization reaction were 7.2 and 60 °C, respectively. The enzyme was stable at pH 6.0–10.5 and 30 °C. The enzyme activity was activated by Sr²⁺, Mg²⁺, Co²⁺, Mn²⁺, and Cu²⁺, and it was inhibited by Zn²⁺and Ag⁺. The molecular mass of cyclodextrin glucanotransferase was established to be 73,400 Da by sodium dodecyl sulfate–polyacrylamide gel electrophoresis, 68,200 Da by gel chromatography, and 75,000 Da by mass spectrometry. The monomer form of the enzyme was confirmed by the analysis of the N-terminal amino acid sequence. Cyclodextrin glucanotransferase formed all three types of cyclodextrins, but the predominant product was β-cyclodextrin.     

Purification and Characterization of Thermostable α-Galactosidase from <Emphasis Type="Italic">Aspergillus terreus</Emphasis><Subscript>GR</Subscript>

An extracellular thermostable α-galactosidase producing Aspergillus terreus _GR strain was isolated from soil sample using guar gum as sole source of carbon. It was purified to apparent homogeneity by acetone precipitation, gel filtration followed by DEAE-Sephacel chromatographic step. The purified enzyme showed a single band after sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The molecular weight of the purified enzyme after SDS-PAGE was 108 kDa. The enzyme showed optimum pH and temperature of 5.0 and 65 °C, respectively, for artificial substrate pNPαGal. α-Galactosidase from A. terreus _GR is found to be thermostable, as it was not inactivated after heating at 65 °C for 40 min. The K _m for pNPαGal, oNPαGal, raffinose, and stachyose are 0.1, 0.28, 0.42, and 0.33 mM, respectively. Inhibitors such as 1,10-phenanthroline, phenylmethylsulfonyl fluoride, ethylenediaminetetraacetic acid, mercaptoethanol, and urea have no effect, whereas N-bromosuccinamide inhibited enzyme activity by 100%. Among metal ions tested, Mg²⁺, Ni²⁺, Ca²⁺, Co²⁺, and Mn²⁺ had no effect on enzyme activity, but Ag⁺, Hg²⁺, and Cu²⁺ have inhibited complete activity.     

Purification and properties of cyclodextrinase fromBacillus stearothermophilus HY-1

A thermostable cyclodextrinase (EC 3.2.1.54) fromBacillus stearothermophilus HY-1 was purified to homogeneity by disc-electrophoresis after sonication disruption, ammonium sulfate fractionation, DEAE-cellulose(DE32) column chromatography, hydroxyapatite chromatography, Sephadex G150 gel-filtration, and α-cyclodextrin-AH-Sepharose 4B affinity chromatography. The enzyme was purified 230-fold with 21.2% of activity recovery. The optimal substrates of the enzyme were α-, Β-, and γ-cyclodextrins and linear maltooligosaccharides, and the final product was mainly maltose. The enzyme could hydrolyze pullulan to produce panose. It could also hydrolyze soluble starch, amylose, and amylopectin, but not glycogen. The Km and Vmax for α-, Β-, and γ-cyclodextrins were 1.79, 1.67, and 2.50 mg/mL, and 336, 185, and 208 Μmol/mg/min, respectively. The molecular weight of the enzyme was 61,000 by SDS-gel-electrophoresis. The isoelectric point was pH 5.0. The enzyme was most active at pH 6.2 and 55‡C, and it was strongly inhibited by Cu²⁺, Hg²⁺, Zn²⁺, Pb²⁺, and slightly by Fe²⁺. The effect of some protein modification reagents on the activity of the enzyme suggested that tryptophan and histidine residue(s) may be located at the active site. The amino acid composition of the enzyme was also determined.     

Purification and Characterization of a Hyperthermostable and High Maltogenic α-Amylase of an Extreme Thermophile <Emphasis Type="Italic">Geobacillus thermoleovorans</Emphasis>

The purified α-amylase of Geobacillus thermoleovorans had a molecular mass of 26 kDa with a pI of 5.4, and it was optimally active at 100 °C and pH 8.0. The T _1/2 of α-amylase at 100 °C increased from 3.6 to 5.6 h in the presence of cholic acid. The activation energy and temperature quotient (Q ₁₀) of the enzyme were 84.10 kJ/mol and 1.31, respectively. The activity of the enzyme was enhanced strongly by Co²⁺ and Fe²⁺; enhanced slightly by Ba²⁺, Mn²⁺, Ni²⁺, and Mg²⁺; inhibited strongly by Sn²⁺, Hg²⁺, and Pb²⁺, and inhibited slightly by EDTA, phenyl methyl sulfonyl fluoride, N-ethylmaleimide, and dithiothreitol. The enzyme activity was not affected by Ca²⁺ and ethylene glycol-bis (β-amino ethyl ether)-N,N,N,N-tetra acetic acid. Among different additives and detergents, polyethylene glycol 8000 and Tween 20, 40, and 80 stabilized the enzyme activity, whereas Triton X-100, glycerol, glycine, dextrin, and sodium dodecyl sulfate inhibited to a varied extent. α-Amylase exhibited activity on several starch substrates and their derivatives. The K _m and K _cat values (soluble starch) were 1.10 mg/ml and 5.9 × 10³ /min, respectively. The enzyme hydrolyzed raw starch of pearl millet (Pennisetum typhoides) efficiently.     

Glycosidases of turnip leaf tissues

Four myrosinase (β-thioglucosidase EC. 3.2.3.1) and seven disaccharase (β-fructofuranosidase, EC. 3.2.1.26) isoenzymes were isolated from turnip leaves. The most active enzymes were isolated in pure form. Myrosinase and disaccharase mol wt was 62.0 × 10³ and 69.5 × 10³ dalton, respectively, on the basis of gel filtration on Sephadex G-200. Myrosinase pH profile showed high activity between pH 5 and 7 with the optimum at pH 5.5. The purified enzyme was heat-stable for 60 min at 30°C with only loss of 24% of activity. Its activity is strongly inhibited (100%) by Pb²⁺, Ba²⁺, Cu²⁺ and Ca²⁺ ions, and activated (70%) by EDTA at 0.04M. The pure enzyme failed to hydrolyze amylose, glycogen, lactose, maltose, and sucrose. TheK _m andV _max values of myrosinase using sinigrin as specific substrate was 0.045 mM and 2.5 U, respectively. The maximal activity of disaccharase enzyme was obtained at pH 4–5 and 35–37°C. The enzyme was heat-stable at 30°C for 30 min with only 10% loss of its activity. Its activity is strongly activated (70–240%) by Ca²⁺, Ba²⁺, Cu²⁺, and EDTA at 0.01M. The enzyme activity is specific to the disaccharide sucrose and failed to hydrolyze other disaccharides (maltose and lactose). TheK _m andV _max of disaccharase were 0.123 mM and 3.33 U, respectively.     

New Thermostable Amylase from <Emphasis Type="Italic">Bacillus cohnii</Emphasis> US147 with a Broad pH Applicability

A new thermophilic bacterial strain identified as Bacillus cohnii US147 was isolated from the southern Tunisian soil. The identification was based on physiological tests and molecular techniques related to the 16S ribosomal ribonucleic acid. The isolated strain produced amylase, which was purified. This amylase had an apparent molecular mass of 30 kDa as estimated by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis. Amylase US147 showed K _m and V _max values of 0.7 mg/ml and 2.2 U/ml, respectively, with starch as the substrate. The enzyme was active in acid and basic pH and had a maximal activity on starch at pH 9 and 70 °C. The enzyme was stable at pH 9 for 72 h and retained half of its activity after incubation at 70 °C for 150 min. A partially inhibition (15%, 25%, 23%, 20%, and 22%) was obtained with 1 mM SDS, 1 mM NaBO₃, 1 mM H₂O_2, 1 mM Zn⁺², and 5 mM ethylenediamine tetraacetic acid (EDTA), respectively. The amylase recovered its original activity by the addition of 10 mM Ca ²⁺ to the 5 mM EDTA. These properties indicated a possible use of this amylase in starch saccharification, in detergent, and in other industrial applications.     

Isolation and Characterization of a Novel Thermophilic-Organic Solvent Stable Lipase From <Emphasis Type="Italic">Acinetobacter baylyi</Emphasis>

The benzene tolerant Acinetobacter baylyi isolated from marine sludge in Angsila, Thailand could constitutively secrete lipolytic enzymes. The enzyme was successfully purified 21.89-fold to homogeneity by ammonium sulfate precipitation and gel-permeable column chromatography with a relative molecular mass as 30 kDa. The enzyme expressed maximum activity at 60°C and pH 8.0 with p-nitrophenyl palmitate as a substrate and found to be stable in pH and temperature ranging from 6.0-9.0 to 60-80°C, respectively. A study on solvent stability revealed that the enzyme was highly resisted to many organic solvents especially benzene and isoamyl alcohol, but 40% inhibited by decane, hexane, acetonitrile, and short-chain alcohols. Lipase activity was completely inhibited in the presence of Fe²⁺, Mn²⁺, EDTA, SDS, and Triton X-100 while it was suffered detrimentally by Tween 80. The activity was enhanced by phenylmethylsulfonyl fluoride (PMSF), Na⁺, and Mg²⁺ and no significant effect was found in the presence of Ca²⁺ and Li⁺. Half of an activity was retained by Ba²⁺, Ag⁺, Hg⁺, Ni²⁺, Zn²⁺, and DTT. The enzyme could hydrolyze a wide range of p-nitrophenyl esters, but preferentially medium length acyl chains (C₈-C₁₂). Among natural oils and fats, the enzyme 11-folds favorably catalyzed the hydrolysis of rice bran oil, corn oil, sesame oil, and coconut oil in comparison to palm oil. Moreover, the transesterification activity of palm oil to fatty acid methyl esters (FAMEs) revealed 31.64 ± 1.58% after 48 h. The characteristics of novel A. baylyi lipase, as high temperature stability, organic solvent tolerance, and transesterification capacity from palm oil to FAMEs, indicate that it could be a vigorous biocatalyzer in the prospective fields as bioenergy industry or even in organic synthesis and pharmaceutical industry.     

Influence of Different Substrates on the Production of a Mutant Thermostable Glucoamylase in Submerged Fermentation

Three mutations, Ser54→Pro, Thr314→Ala, and His415→Tyr, were identified in Aspergillus awamori glucoamylase gene expressed by Saccharomyces cerevisiae. The mutant glucoamylase (GA) was substantially more thermostable than a wild-type GA at 70 °C, with a 3.0 KJ mol⁻¹ increase in the free energy of thermo-inactivation. The effect of starch from different botanical sources on the production of this GA was measured in liquid fermentation using commercial soluble starch, cassava, potato, and corn as the carbon source. The best substrate for GA production was the potato starch showing an enzymatic activity of 6.6 U/mL. The commercial soluble starch was also a good substrate for the enzyme production with 6.3 U/mL, followed by cassava starch and corn starch with 5.9 and 3.0 U/mL, respectively. These results showed a significant difference on GA production related to the carbon source employed. The mutant GA was purified by acarbose–Sepharose affinity chromatography; the estimated molecular mass was 100 kDa. The mutant GA exhibited optimum activity at pH 4.5 and an optimum temperature of 65 °C.     

Purification and Characterization of Extracellular Inulinase from a Marine Yeast <Emphasis Type="Italic">Cryptococcus aureus</Emphasis> G7a and Inulin Hydrolysis by the Purified Inulinase

The extracellular inulinase in the supernatant of the cell culture of the marine yeast Cryptococcus aureus G7a was purified to homogeneity with a 7.2-fold increase in specific inulinase activity compared to that in the supernatant by ultrafiltration, concentration, gel filtration chromatography (Sephadex™ G-75), and anion exchange chromatography (DEAE sepharose fast flow anion exchange). The molecular mass of the purified enzyme was estimated to be 60.0 kDa. The optimal pH and temperature of the purified enzyme were 5.0 and 50 °C, respectively. The enzyme was activated by Ca²⁺, K⁺, Na⁺, Fe²⁺, and Zn²⁺. However, Mg²⁺, Hg²⁺, and Ag⁺ acted as inhibitors in decreasing the activity of the purified inulinase. The enzyme was strongly inhibited by phenylmethanesulphonyl fluoride (PMSF), iodoacetic acid, EDTA, and 1,10-phenanthroline. The K _m and V _max values of the purified enzyme for inulin were 20.06 mg/ml and 0.0085 mg/min, respectively. A large amount of monosaccharides were detected after the hydrolysis of inulin with the purified inulinase, indicating the purified inulinase had a high exoinulinase activity.     

Biochemical Properties of α-Amylase from Peel of <Emphasis Type="Italic">Citrus sinensis</Emphasis> cv. Abosora

α-Amylase activity was screened in the peel, as waste fruit, of 13 species and cultivars of Egyptian citrus. The species Citrus sinensis cv. Abosora had the highest activity. α-Amylase AI from Abosora peel was purified to homogeneity using anion and cation-exchange, and gel filtration chromatographies. Molecular weight of α-amylase AI was found to be 42 kDa. The hydrolysis properties of α-amylase AI toward different substrates indicated that corn starch is the best substrate. The α-amylase had the highest activity toward glycogen compared with amylopectin and dextrin. Potato starch had low affinity toward α-amylase AI but it did not hydrolyze β-cyclodextrin and dextran. Apparent Km for α-amylase AI was 5 mg (0.5%) starch/ml. α-Amylase AI showed optimum activity at pH 5.6 and 40 °C. The enzyme was thermally stable up to 40 °C and inactivated at 70 °C. The effect of mono and divalent metal ions were tested for the α-amylase AI. Ba²⁺ was found to have activating effect, where as Li⁺ had negligible effect on activity. The other metals caused inhibition effect. Activity of the α-amylase AI was increased one and half in the presence of 4 mM Ca²⁺ and was found to be partially inactivated at 10 mM Ca²⁺. The reduction of starch viscosity indicated that the enzyme is endoamylase. The results suggested that, in addition to citrus peel is a rich source of pectins and flavanoids, α-amylase AI from orange peel could be involved in the development and ripening of citrus fruit and may be used for juice processing.     

Purification, characterization, and structural investigation of a new moderately thermophilic and partially calcium-independent extracellular α-amylase from Bacillus sp. TM1

A new α-amylase was extracted from a recently found strain of Bacillus sp. and purified by ion-exchange chromatography. Sodium dodecyl sulfate polyacrylamide gel electrophoresis showed a single band for the purified enzyme with an apparent molecular weight of 59 kDa. The optimum temperature and pH range of the enzyme were 40–60°C and 4.5–7.5, respectively, and its activation energy was 1.974 kcal/mol. The K _m value for the enzyme activity on solubie starch was 4 mg/mL, and the T _m values obtained from the circular dichroism (CD) results of thermal unfolding were 78.7 and 80.2°C in the absence and presence of the calcium, respectively. The enzyme was almost completely inhibited by the addition of Fe³⁺, Mn²⁺, and Zn²⁺ and was activated by EDTA, Cr³⁺, and Al³⁺. Moreover, it was partially inhibited by Ca²⁺, Ba²⁺, Ni²⁺, and Co²⁺. Proteolytic digestion of the enzyme using trypsin combined with results from T _m using CD and irreversible thermoinactivation suggests that this enzyme can be considered a moderate thermophile with both mild flexibility and rigidity.     

Cloning of a Heat-Stable Chitin Deacetylase Gene from <Emphasis Type="Italic">Aspergillus nidulans</Emphasis> and its Functional Expression in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A gene encoding chitin deacetylase was cloned by polymerase chain reaction from Aspergillus nidulans. Sequencing result showed 40% homology to the corresponding gene from Colletotrichum lindemuthianum. The complete gene contains an open reading frame of 747 nucleotides encoding a sequence of 249 amino acid residues. The chitin deacetylase gene was subcloned into a pET28a expression vector and expressed in Escherichia coli BL21 and then purified by metal affinity chromatography using a His-bind column. The purified chitin deacetylase demonstrated an activity of 0.77 U ml⁻¹ for the glycol chitin substrates, and its specific activity was 4.17 U mg⁻¹ for it. The optimal temperature and pH of the purified enzyme were 50 °C and 8.0, respectively. When glycol chitin was used as the substrate, K _m was 4.92 mg ml⁻¹, and K _cat showed 6.25 s⁻¹, thus the ratio of K _cat and K _m was 1.27 ml s⁻¹ mg⁻¹. The activity of chitin deacetylase was affected by a range of metal ions and ethylenediaminetetraacetic acid.     

Substrate Specificity and Thermostability of the Dehairing Alkaline Protease from <Emphasis Type="Italic">Bacillus pumilus</Emphasis>

An alkaline protease (DHAP) from Bacillus pumilus has shown great potential in hide dehairing. To get better insights on its catalytic properties for application, the substrate specificity and thermostability were investigated using five natural proteins and nine synthetic peptides. The results showed that DHAP could hydrolyze five proteins tested here in different specificity. Collagen, a component of animal skin, was more resistant to hydrolysis than casein, fibrin, and gelatin. Among the synthetic peptides, the enzyme showed activity mainly with tetrapeptide substrates with the catalytic efficiency in order of Phe>Leu>Ala at P1 site, although k _m value for AAVA-pN is much lower than that for AAPL-pN and AAPF-pN. With tripeptide substrates, smaller side-chain group (Gly) at P1 site was not hydrolyzed by DHAP. The enzyme showed good thermostability below 60 °C, and lost activity so quickly above 70 °C. The thermostability was largely dependent on metal ion, especially Ca²⁺, although other ions, like Mg²⁺, Mn²⁺, and Co²⁺, could sustain stability at certain extent within limited time. Cu²⁺, Fe²⁺, as well as Al³⁺, did not support the enzyme to retain activity at 60 °C even in 5 min. In addition, the selected metal ions could coordinate calcium in improvement or destruction of thermostability for DHAP.     

Cloning,Expression, and Characterization of a Wide-pH-Range Stable Phosphite Dehydrogenase from <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. K in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A phosphite dehydrogenase gene (ptdhK) consisting of 1,011-bp nucleotides which encoding a peptide of 336 amino acid residues was cloned from Pseudomonas sp. K. gene ptdhK was expressed in Escherichia coli BL21 (DE3) and the corresponding recombinant enzyme was purified by metal affinity chromatography. The recombinant protein is a homodimer with a monomeric molecular mass of 37.2 kDa. The specific activity of PTDH-K was 3.49 U mg⁻¹ at 25 °C. The recombinant PTDH-K exhibited maximum activity at pH 3.0 and at 40 °C and displayed high stability within a wide range of pHs (5.0 to 10.5). PTDH-K had a high affinity to its natural substrates, with K _m values for sodium phosphite and NAD of 0.475 ± 0.073 and 0.022 ± 0.007 mM, respectively. The activity of PTDH-K was enhanced by Na⁺, NH₄⁺, Mg²⁺, Fe²⁺, Fe³⁺, Co²⁺, and EDTA, and PTDH-K exhibited different tolerance to various organic solvents.     

Purification and Characterization of a Novel Collagenase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> Col-J

The collagenase, produced extracellular by Bacillus pumilus Col-J, was purified by ammonium sulfate precipitation followed by two gel filtrations, involving Sephadex G-100 column and Sepharose Fast Flow column. Purified collagenase has a 31.53-fold increase in specific activity of 87.33 U/mg and 7.00% recovery. The collagenase has a relative molecular weight of 58.64 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The optimal temperature for the enzyme reaction was 45 °C. More than 50% of the original activity still remained after 5 min of incubation at 70 °C or 10 min at 60 °C. The maximal enzyme activity of collagenase was obtained at pH 7.5, and it was stable over a pH range of 6.5–8.0. The collagenase activity was strongly inhibited by Mn²⁺, Pb²⁺, ethylenediamine tetraacetic acid, ethylene glycol tetraacetic acid, and β-mercaptoethanol. However, Ca²⁺ and Mg²⁺ greatly increased its activity. The collagenase from B. pumilus Col-J showed highly specific activity towards the native collagen from calf skin. The K _m and V _max of the enzyme for collagen were 0.79 mg/mL and 129.5 U, respectively.