Drying and hydrophobic collapse of paraffin plates

We perform molecular dynamics simulations of the hydrophobic collapse of two paraffin plates to examine how the collapse is mediated by realistic paraffin-water attractive van der Waals forces. We explore several aspects of the drying transition between the plates, including the critical separation for drying and the critical size of the vapor bubble required for the nucleation of the drying event. We also investigate the kinetics of hydrophobic collapse and find that the hydrophobic collapse occurs in about 100 ps. We compare these results with the simulations with the plate-water van der Waals attractions turned off and with recent results on the hydrophobic collapse of multidomain proteins. Last, we discuss the relationship among the dewetting transition critical distance, van der Waals potential well depth, and water contact angle on solute surface using a simple macroscopic theory.     

Simulation analysis of the temperature dependence of lignin structure and dynamics

Lignins are hydrophobic, branched polymers that regulate water conduction and provide protection against chemical and biological degradation in plant cell walls. Lignins also form a residual barrier to effective hydrolysis of plant biomass pretreated at elevated temperatures in cellulosic ethanol production. Here, the temperature-dependent structure and dynamics of individual softwood lignin polymers in aqueous solution are examined using extensive (17 μs) molecular dynamics simulations. With decreasing temperature the lignins are found to transition from mobile, extended to glassy, compact states. The polymers are composed of blobs, inside which the radius of gyration of a polymer segment is a power-law function of the number of monomers comprising it. In the low temperature states the blobs are interpermeable, the polymer does not conform to Zimm/Stockmayer theory, and branching does not lead to reduction of the polymer size, the radius of gyration being instead determined by shape anisotropy. At high temperatures the blobs become spatially separated leading to a fractal crumpled globule form. The low-temperature collapse is thermodynamically driven by the increase of the translational entropy and density fluctuations of water molecules removed from the hydration shell, thus distinguishing lignin collapse from enthalpically driven coil-globule polymer transitions and providing a thermodynamic role of hydration water density fluctuations in driving hydrophobic polymer collapse. Although hydrophobic, lignin is wetted, leading to locally enhanced chain dynamics of solvent-exposed monomers. The detailed characterization obtained here provides insight at atomic detail into processes relevant to biomass pretreatment for cellulosic ethanol production and general polymer coil-globule transition phenomena.     

Hydration forces: Observations, explanations, expectations, questions

The hydration force between large molecules or large surfaces is built on weak perturbation of many solvent molecules. The structure of the surface sets boundary conditions on solvent while structural forces within the solvent set the range. For this collection of essays, we focused on forces between surfaces at nanometer separations. It is instructive to distinguish primary hydration, the binding of water and perturbation within a few layers, from secondary hydration related to redistribution of solutes. The subject is still basically empirical, lacking satisfactory theory and sufficient measurement.     

Recent advances in the use of the quartz crystal microbalance with dissipation for the study of the collapse of polyelectrolyte brushes

The combination of Quartz Crystal Microbalance and ellipsometry to quantify polyelectrolyte brush hydration and how this impacts on the study of brush collapse is discussed here. Recent articles study collapse after quantifying hydration of poly (2-methacryloyloxy ethyl trimethyl ammonium chloride) (PMETAC) and poly(potassium sulfo propyl methacrylate). Water lost increases with ionic strength but only a 50% of their water content is lost at 1 M NaCl. For PMETAC brushes the exchange of Cl⁻ by ClO₄⁻ is more effective, causing 50% lost at 0.05 M. The hydration and water lost for PMETAC brushes synthesized from thiol monolayers with variable density of initiators from 1 to 100% show that the freely entrapped water of the brushes is around a 10%. Irrespectively of initiator percentage the brush does not lose at 1 M NaCl more than 50% of the original water content. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1068–1072     

Site-specific hydration dynamics in the nonpolar core of a molten globule by dynamic nuclear polarization of water

Water-protein interactions play a direct role in protein folding. The chain collapse that accompanies protein folding involves extrusion of water from the nonpolar core. For many proteins, including apomyoglobin (apoMb), hydrophobic interactions drive an initial collapse to an intermediate state before folding to the final structure. However, the debate continues as to whether the core of the collapsed intermediate state is hydrated and, if so, what the dynamic nature of this water is. A key challenge is that protein hydration dynamics is significantly heterogeneous, yet suitable experimental techniques for measuring hydration dynamics with site-specificity are lacking. Here, we introduce Overhauser dynamic nuclear polarization at 0.35 T via site-specific nitroxide spin labels as a unique tool to probe internal and surface protein hydration dynamics with site-specific resolution in the molten globular, native, and unfolded protein states. The (1)H NMR signal enhancement of water carries information about the local dynamics of the solvent within ～10 ? of a spin label. EPR is used synergistically to gain insights on local polarity and mobility of the spin-labeled protein. Several buried and solvent-exposed sites of apoMb are examined, each bearing a covalently bound nitroxide spin label. We find that the nonpoloar core of the apoMb molten globule is hydrated with water bearing significant translational dynamics, only 4-6-fold slower than that of bulk water. The hydration dynamics of the native state is heterogeneous, while the acid-unfolded state bears fast-diffusing hydration water. This study provides a high-resolution glimpse at the folding-dependent nature of protein hydration dynamics.     

Extended frequency range depolarized light scattering study of N-acetyl-leucine-methylamide-water solutions

We have studied the influence of the amphiphilic model peptide N-acetyl-leucine-methylamide (NALMA) on the dynamics of water using extended frequency range depolarized light scattering (EDLS), between 0.3 GHz and 36 THz. This technique allowed us to separate solute from solvent dynamics and bulk from hydration water, providing both characteristic times and relative fractions. In the temperature range 5-65 °C, a retardation factor from 9 to 7 is found for water hydrating NALMA. Moreover, in the same range, a hydration number from 62 to 50 is observed, corresponding to more than two hydration layers. This strong perturbation suggests the existence of a collective effect of amphiphilic molecules on surrounding water molecules.     

Thermal signature of hydrophobic hydration dynamics

Hydrophobic hydration, the perturbation of the aqueous solvent near an apolar solute or interface, is a fundamental ingredient in many chemical and biological processes. Both bulk water and aqueous solutions of apolar solutes behave anomalously at low temperatures for reasons that are not fully understood. Here, we use (2)H NMR relaxation to characterize the rotational dynamics in hydrophobic hydration shells over a wide temperature range, extending down to 243 K. We examine four partly hydrophobic solutes: the peptides N-acetyl-glycine-N'-methylamide and N-acetyl-leucine-N'-methylamide, and the osmolytes trimethylamine N-oxide and tetramethylurea. For all four solutes, we find that water rotates with lower activation energy in the hydration shell than in bulk water below 255 +/- 2 K. At still lower temperatures, water rotation is predicted to be faster in the shell than in bulk. We rationalize this behavior in terms of the geometric constraints imposed by the solute. These findings reverse the classical "iceberg" view of hydrophobic hydration by indicating that hydrophobic hydration water is less ice-like than bulk water. Our results also challenge the "structural temperature" concept. The two investigated osmolytes have opposite effects on protein stability but have virtually the same effect on water dynamics, suggesting that they do not act indirectly via solvent perturbations. The NMR-derived picture of hydrophobic hydration dynamics differs substantially from views emerging from recent quasielastic neutron scattering and pump-probe infrared spectroscopy studies of the same solutes. We discuss the possible reasons for these discrepancies.     

Hydration properties and potentials of mean force of nonpolar amino acid residues in water: a pertubation theoretic approach

We use a perturbation approach to calculate the solute-solvent and solute-solute pair correlations for infinitely dilute solutions of nonpolar amino acid side chains in water. In particular, from the solute-solute correlations we derive potentials of mean force for all the distances between different residues of amino acids. Comparison with molecular dynamics simulations performed using GROMOS package shows that the goodness of the approximation varies with the amino acid considered. We discuss in terms of hydrophobicity the different effect that the inclusion of the attractions causes on the solute-water and solute-solute correlations.     

Global thermodynamics of hydrophobic cavitation, dewetting, and hydration

Pure water experimental and simulation results are combined to predict the thermodynamics of cavity formation, spanning atomic to macroscopic length scales, over the entire ambient liquid temperature range. The resulting cavity equation of state is used to quantify dewetting excess contributions to cavity formation thermodynamics and construct a thermodynamic perturbation theory of hydrophobic hydration. Predictions are compared with large cavity simulations and experimental rare-gas hydration thermodynamics data (for He, Ne, Ar, Kr, Xe, and Rn). Key findings include the strong temperature dependence of the critical length scale for hydrophobic dewetting and the evaluation of fundamental solute-solvent interaction contributions to rare-gas hydration chemical potentials.     

Long-range hydrogen-bond structure in aqueous solutions and the vapor-water interface

There is a considerable disagreement about the extent to which solutes perturb water structure. On the one hand, studies that analyse structure directly only show local structuring in a solute's first and possibly second hydration shells. On the other hand, thermodynamic and kinetic data imply indirectly that structuring occurs much further away. Here, the hydrogen-bond structure of water around halide anions, alkali cations, noble-gas solutes, and at the vapor-water interface is examined using molecular dynamics simulations. In addition to the expected perturbation in the first hydration shell, deviations from bulk behavior are observed at longer range in the rest of the simulation box. In particular, at the longer range, there is an excess of acceptors around halide anions, an excess of donors around alkali cations, weakly enhanced tetrahedrality and an oscillating excess and deficiency of donors and acceptors around noble-gas solutes, and enhanced tetrahedrality at the vapor-water interface. The structuring compensates for the short-range perturbation in water-water hydrogen bonds induced by the solute. Rather than being confined close to the solute, it is spread over as many water molecules as possible, presumably to minimize the perturbation to each water molecule.     

Proton conductivity in crosslinked hydrophilic ionic polymer system: Competitive hydration,crosslink heterogeneity,and ineffective domains

High proton conductivity in hydrophobic backbone‐based polymers such as Nafion is known to be due to the formation of organized ionic clusters and channels upon hydration. However, a lower proton conductivity in hydrophilic, ionic polymers and the role played by the microstructure are not well understood. In this work, we demonstrate the importance of heterogeneity in crosslinked ionic polymer networks in explaining proton conductivity. Poly(vinyl alcohol) (PVA) crosslinked with sulfosuccinic acid (SSA) is used as the model polymer system for the study. Evolution of the microstructure with hydration and the effect on proton conductivity are analyzed using ATR‐FTIR spectroscopy, dielectric spectroscopy, and small‐angle neutron scattering. We show that the presence of the two hydrophilic groups in PVA‐SSA (hydroxyl and sulfonic acid), as opposed to Nafion, results in competition for water and a lower proton conductivity. The crosslinked polymer–water system contains heterogeneous domains of crosslink nodes which are conductive. These domains (of size 20–35 Å) interconnect with each other and form tortuous percolating domains through which proton conduction takes place. The presence of hydroxyl groups results in some of the domains being ineffective for proton transport, resulting in a lower conductivity. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1087–1101     

How short-range attractions impact the structural order, self-diffusivity, and viscosity of a fluid

We present molecular simulation data for viscosity, self-diffusivity, and the local structural ordering of (i) a hard-sphere fluid and (ii) a square-well fluid with short-range attractions. The latter fluid exhibits a region of dynamic anomalies in its phase diagram, where its mobility increases upon isochoric cooling, which is found to be a subset of a larger region of structural anomalies, in which its pair correlations strengthen upon isochoric heating. This "cascade of anomalies" qualitatively resembles that found in recent simulations of liquid water. The results for the hard-sphere and square-well systems also show that the breakdown of the Stokes-Einstein relation upon supercooling occurs for conditions where viscosity and self-diffusivity develop different couplings to the degree of pairwise structural ordering of the liquid. We discuss how these couplings reflect dynamic heterogeneities. Finally, we note that the simulation data suggest how repulsive and attractive glasses may generally be characterized by two distinct levels of short-range structural order.     

Surface hydration for antifouling and bio-adhesion

Antifouling properties of materials play crucial roles in many important applications such as biomedical implants, marine antifouling coatings, biosensing, and membranes for separation. Poly(ethylene glycol) (or PEG) containing polymers and zwitterionic polymers have been shown to be excellent antifouling materials. It is believed that their outstanding antifouling activity comes from their strong surface hydration. On the other hand, it is difficult to develop underwater glues, although adhesives with strong adhesion in a dry environment are widely available. This is related to dehydration, which is important for adhesion for many cases while water is the enemy of adhesion. In this research, we applied sum frequency generation (SFG) vibrational spectroscopy to investigate buried interfaces between mussel adhesive plaques and a variety of materials including antifouling polymers and control samples, supplemented by studies on marine animal (mussel) behavior and adhesion measurements. It was found that PEG containing polymers and zwitterionic polymers have very strong surface hydration in an aqueous environment, which is the key for their excellent antifouling performance. Because of the strong surface hydration, mussels do not settle on these surfaces even after binding to the surfaces with rubber bands. For control samples, SFG results indicate that their surface hydration is much weaker, and therefore mussels can generate adhesives to displace water to cause dehydration at the interface. Because of the dehydration, mussels can foul on the surfaces of these control materials. Our experiments also showed that if mussels were forced to deposit adhesives onto the PEG containing polymers and zwitterionic polymers, interfacial dehydration did not occur. However, even with the strong interfacial hydration, strong adhesion between mussel adhesives and antifouling polymer surfaces was detected, showing that under certain circumstances, interfacial water could enhance the interfacial bio-adhesion.

Antifouling properties of materials play crucial roles in many important applications such as biomedical implants, marine antifouling coatings, biosensing, and membranes for separation.     

Effect of temperature, pressure, and cosolvents on structural and dynamic properties of the hydration shell of SNase: a molecular dynamics computer simulation study

It is now generally agreed that the hydration water and solvational properties play a crucial role in determining the dynamics and hence the functionality of proteins. We present molecular dynamics computer simulation studies on staphylococcal nuclease (SNase) at various temperatures and pressures as well as in different cosolvent solutions containing various concentrations of urea and glycerol. The aim is to provide a molecular level understanding of how different types of cosolvents (chaotropic and kosmotropic) as well as temperature and high hydrostatic pressure modify the structure and dynamics of the hydration water. Taken together, these three intrinsic thermodynamic variables, temperature, pressure, and chemical potential (or activity) of the solvent, are able to influence the stability and function of the protein by protein-solvent dynamic coupling in different ways. A detailed analysis of the structural and dynamical properties of the water and cosolvents at the protein surface (density profile, coordination numbers, hydrogen-bond distribution, average H-bond lifetimes (water-protein and water-water), and average residence time of water in the hydration shell) was carried out, and differences in the structural and dynamical properties of the hydration water in the presence of the different cosolvents and at temperatures between 300 and 400 K and pressures up to 5000 bar are discussed. Furthermore, the results obtained help understand various thermodynamic properties measured for the protein.     

Perturbation of water structure due to monovalent ions in solution

The ion induced modification to the tetrahedral structure of water is a topic of much current interest. We address this question by interpreting neutron diffraction data from monovalent ionic solutions of NaCl and KCl using a computer assisted structural modeling technique. We investigate the effect that these ions have on the water-water O-O, O-H and H-H radial distribution functions as a function of ionic concentration. It is found that the O-H and H-H functions are only marginally affected by ionic composition, signaling that hydrogen bonding between water molecules remains largely intact, even at the highest concentrations. On the other hand the O-O functions are strongly modified by the ions. In particular the position of the second peak in g(OO)(r), is found to move inwards with increasing salt concentration, in a manner closely analogous to what happens in pure water under pressure. Furthermore by recalculating g(OO)(r) after excluding all the water molecules in the first hydration shell of each ion, we show that this structural perturbation exists outside the first hydration shell of the ions.     

Molecular description of the collapse of hydrophobic polymer chains in water

We propose a self-consistent molecular theory of conformational properties of flexible polymers in solution. It is applied to the collapse of a hydrophobic polymer chain in water, and can be readily generalized to any polymer-solvent system (e.g., copolymers with high complexity). We stress the potential of this method for a variety of problems, such as protein folding.     

Hydration of humic and fulvic acids studied by DSC

Qualitative and quantitative aspects of hydration of four humic acids (HA) and three fulvic acids (FA) originating from different sources were investigated. DSC experiments at subambient temperatures were carried out in order to monitor differences in ice behavior originating from freezable water surrounding humic molecules. It was found that kinetic effects play a significant role in hydration processes of both HA and FA. In fact, the hydration took part over 21?days which was detected as a progressive decrease in ice melting enthalpy. Simultaneously, the peak shapes and positions changed indicating structural changes in the physical structure of the humic substances. In case of FA, the dependency of melting enthalpy on water concentration showed a linear trend resembling a complete hydration previously observed for water-soluble hydrophilic polymers. In contrast, the melting enthalpy of some HA increased in a step-like way with increasing water content, suggesting preservation of original hydrophobic scaffold during the hydration. The differences between the rather young FA and the rather old HA lead to the conclusion that water can play a significant role in processes of humification. We assume that separation of hydrophobic and hydrophilic domains and thus increase in nanoscale heterogeneity represents an important physical contribution to the overall humification process. It was also demonstrated that the higher content of oxygen in humic molecules is not the only indicator of higher water holding capacity. Instead the porosity of humic matrix seems to contribute as additional parameter into these processes.     

原位探测防污高分子材料与液体界面的分子结构

Marine organisms such as plants, algae or small animals can adhere to surfaces of materials that are submerged in ocean. The accumulation of these organisms on surfaces is a marine biofouling process that has considerable adverse effects. Marine biofouling on ship hulls can cause severe fuel consumption increase. Investigations on antifouling polymers are therefore becoming important research topics for marine vessel operations. Antifouling polymers can be applied as coating layers on the ship hull, protecting it against the settlement and growth of sea organisms. Polyethylene glycol (PEG) is a hydrophilic polymer that can effectively resist the accumulation of marine organisms. PEG-based antifouling coatings have therefore been extensively researched and developed. However, the inferior stability of PEG makes it subject to degradation, rendering it ineffective for long-term services. Zwitterionic polymers have also emerged as promising antifouling materials in recent years. These polymers consist of both positively charged and negatively charged functional groups. Various zwitterionic polymers have been demonstrated to exhibit exceptional antifouling properties. Previously, surface characterizations of zwitterionic polymers have revealed that strong surface hydration is critical for their antifouling properties. In addition to these hydrophilic polymers, amphiphilic materials have also been developed as potential antifouling coatings. Both hydrophobic and hydrophilic functional groups are incorporated into the backbones or sidechains of these polymers. It has been demonstrated that the antifouling performance can be enhanced by precisely controlling the sequence of the hydrophobic-hydrophilic functionalities. Since biofouling generally occurs at the outer surface of the coatings, the antifouling properties of these coatings are closely related to their surface characteristics in water. Therefore, understanding of the surface molecular structures of antifouling materials is imperative for their future developments. In this review, we will summarize our recent advancements of antifouling material surface analysis using sum frequency generation (SFG) vibrational spectroscopy. SFG is a surface-sensitive technique which can provide molecular information of water and polymer structures at interfaces in situ in real time. The antifouling polymers we will review include zwitterionic polymer brushes, mixed charged polymers, and amphiphilic polypeptoids. Interfacial hydration studies of these polymers by SFG will be presented. The salt effect on antifouling polymer surface hydration will also be discussed. In addition, the interactions between antifouling materials and protein molecules as well as algae will be reviewed. The above research clearly established strong correlations between strong surface hydration and good antifouling properties. It also demonstrated that SFG is a powerful technique to provide molecular level understanding of polymer antifouling mechanisms.     

Effect of counterion substitution on the viscosity anomaly in AOT microemulsions

AOT-based water-in-oil microemulsions display an anomalous maximum in the viscosity with X, the water to surfactant ratio. Several explanations for this phenomenon have been offered. In this work, we investigate viscosity and droplet interactions in Ca(AOT)(2)/water/n-decane and KAOT/water/n-decane microemulsions and compare our results with the commonly studied NaAOT/water/oil system. The Ca(AOT)(2) system demonstrates a maximum in relative viscosity and droplet attraction near X=15, similar to the NaAOT system, although the maximum occurs at a higher value of X in the Ca(AOT)(2) system. By contrast, the viscosity and interparticle interactions in the KAOT system do not strongly depend on the amount of water in the system. We attribute the differences in behavior between the two systems to different hydration characteristics of the counterion, and we believe that our results are consistent with a previously proposed model that attributes interdroplet attractions to charge fluctuations and surfactant exchange. Our findings support the connection between the viscosity anomaly and interparticle interactions.