Second-Derivative Spectrophotometric Determination of Trace Copper after Preconcentration with the Ion Pair of 2-Nitroso-1-Naphthol-4-Sulfonic Acid and Tetradecyldimethylbenzylammonium Chloride on Microcrystalline Naphthalene or a Column

Copper is quantitatively retained by 2-nitroso-1-naphthol-4-sulfonic acid and tetradecyldimethylbenzylammonium chloride on microcrystalline naphthalene in the pH range 7.1–10.7 from large volumes of aqueous solutions of various samples. After filtration, the solid mass consisting of a copper complex and naphthalene is dissolved with 5 mL of dimethylformamide, and the metal is determined by second-derivative spectrophotometry. The copper complex can alternatively be quantitatively adsorbed on tetradecyldimethylbenzylammonium–naphthalene adsorbent packed in a column and determined similarly. About 1.5 g of copper can be concentrated in a column from 300 mL of aqueous sample, where its concentration is as low as 5 ng/mL. The effects of pH, the volume of the aqueous phase, and interferences from a number of metal ions on the determination of copper have been studied in detail to optimize the conditions for its determination in standard alloys and biological samples.     

Differential Pulse Polarographic Determination of Trace Amounts of Lead in Alloys and Biological Samples after Column Preconcentration Using Nitroso-S and TDBA

A highly selective, sensitive, rapid, and economical differential pulse polarographic method has been developed for the determination of trace amounts of lead in various standard alloys and biological samples after the adsorption of its 2-nitroso-l-naphthol-4-sulfonic acid (nitroso-S)—tetradecyldimethylbenzylammonium (TDBA) chloride on microcrystalline naphthalene in the pH range of 8.0–10.5. After filtration, the solid mass is shaken with 9.0 mL of 1 M hydrochloric acid, and lead is determined by differential pulse polarography (DPP). Lead can alternatively be quantitatively adsorbed on 2-nitroso-l-naphthol-4-sulfonic acid-tetradecyldimethylbenzylammonium-naphthalene adsorbent packed in a column and determined similarly. In this case, 1.0 g of lead can be concentrated in a column from 500 mL of an aqueous sample in which its concentration is as low as 2 ng/mL. Characterization of the electroactive process included an examination of the degree of reversibility. Various parameters, such as the pH effect, volume of aqueous phase, HCl concentration, reagent concentration, naphthalene concentration, shaking time, and the interference of a number of metal ions on the determination of lead were studied in detail to optimize the conditions for determination in standard alloys and standard biological samples.     

Preconcentration of Indium(III) from Complex Materials After Adsorption of Its Morpholine-4-dithiocarbamate on Naphthalene or Using Morpholine-4-dithiocarbamate-cetyltrimethylammonium Bromide-naphthalene Adsorbent

Abstract

A highly selective, sensitive and rapid differential pulse polarographic method has been developed for the estimation of trace amounts of indium in standard alloy, ore, synthetic and environmental samples. The morpholine-4-dithiocarbamate of indium(III) is adsorbed on microcrystalline naphthalene in the pH range 3.5–6.4. The metal complex is desorbed with HCl and determined with a differential pulse polarograph (DPP). This metal may alternatively be quantitatively retained on morpholine-4-dithiocarbamate-cetyltrimethylammonium bromidenaphthalene adsorbent packed in a column at a flow rate of 0.5–5.0 ml/min and determined similarly. The detection limit is 0.10 ppm at the minimum instrumental setting (signal to noise ratio = 2). Indium has been determined in the concentration range 0.70–15.0 ppm with a correlation factor of 0.9996 and a relative standard deviation of 0.76% (n = 8). In the column method, the linearity is maintained in the concentration range 0.70–8.5 ppm with a correlation factor of 0.9994 and a relative standard deviation of 0.89% (n = 8). Various parameters, such as the effect of pH, volume of aqueous phase, reagent, and naphthalene concentrations and interference of a large number of metal ions and anions on the estimation of indium have been studied in detail to optimize the conditions for its trace determination in various complex materials.     

Spectrophotometric determination of copper in environmental samples by solid-liquid extraction of its 9, 10-phenanthrenequinone monoximate complex into molten naphthalene

A fairly selective and sensitive spectrophotometric method has been developed for determination of copper after extraction of its 9, 10-phenanthrenequinone monoximate complex into molten naphthalene in the pH range of 6.1-8.4. At room temperature, the solid naphthalene containing the metal complex is separated by filtration, dissolved in dimethylformamide (DMF) and the absorbance measured at 470 nm against the reagent blank. Beer's law is obeyed in the concentration range, 0.0-9.6 micrograms of copper in 10ml of DMF. The molar absorptivity and sensitivity are 6.30 X 10(4) 1 mol-1 cm-1 and 0.001 micrograms cm-2, respectively. The interference of various ions has been studied and the method has been applied for the determination of copper in various standard reference materials, beers, wines, human hair and environmental samples.     

Atomic absorption spectrometric determination of trace amounts of nickel after preconcentration with [1-(2-Pyridylazo)-2-Naphthol]-Naphthalene adsorbent or after adsorption of its complex on microcrystalline naphthalene

An atomic absorption spectrometric method for the determination of trace amounts of nickel after adsorption of its 1 -(2-pyridylazo)-2-naphthol complex on microcrystalline naphthalene has been developed. This complex is adsorbed on microcrystalline naphthalene in the pH range 4.5-7.8 from large volumes of aque ous solutions of various alloys and biological and environmental samples containing nickel. After filtration, the solid mass consisting of nickel complex and naphthalene was dissolved in 5 mL of dimethylformamide, and the metal was determined using a flame atomic absorption spectrometer at a wavelength of 232 nm. Alternatively, nickel can be quantitatively adsorbed on [l-(2-pyridylazo)-2-naphthol]-naphthalene adsorbent packed in a column and determined similarly. The calibration curve is linear over the concentration range 2.0-100 Μg of nickel in 5 mL of the final dimethylformamide solution. Eight replicate determinations of 20 Μg of nickel give a mean absorbance of 0.072 with a relative standard deviation of 1.3%. The sensitivity for 1% absorption is 0.24 Μg/mL. Various parameters such as the effect of pH, the volume of the aqueous phase, and the interference of a large number of metal ions with the determination of nickel have been studied in detail to optimize the conditions for its determination in various standard alloys and biological and environmental samples. This article was submitted by the authors in English.     

Spectrophotometric determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol complex onto microcrystalline naphthalene

A selective Spectrophotometric method has been developed for the trace determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol (PTPT) complex onto microcrystalline naphthalene. The complex is quantitatively adsorbed on naphthalene in the pH range 7.5–11.5, separated by filtration, dissolved in dimethylformamide (DMF) and determined spectrophotometrically at 400 nm. Beer's law is obeyed in the concentration range 2.5–37.5 g of copper in 10 ml of DMF. The molar absorptivity and Sandell's sensitivity are 1.30 × 10⁴1 · mol^–1 · cm^–1 and 0.0048g cm^–2, respectively. Ten replicate analyses of a solution containing 20.0 g of copper gave a mean absorbance of 0.410 with a relative standard deviation of 0.91 %. The interferences of various ions have been studied and the method has been validated by the determination of copper in various standard reference materials, beers, wines, human hair, goat liver and environmental samples.On leave from St. Stephen's College, Delhi 110 007, India     

Derivative spectrophotometric determination of iridium after preconcentration of its 1-(2-pyridylazo)-2-naphthol complex on microcrystalline naphthalene

Iridium is preconcentrated from the large volume of its aqueous solution using 1-(2-pyridylazo-2-naphthol) (PAN) on microcrystalline naphthalene in the pH range of 4.5-6.0. The solid mass after filtration is dissolved with 5 ml of dimethylformamide (DMF) and the metal determined by first derivative spectrophotometry. The detection limit is 20 ppb (signal to noise ratio = 2) and the calibration curve is linear over the concentration range 0.25-75.0 mug in 5 ml of the final DMF solution with a correlation coefficient of 0.9996 and relative standard deviation of +/- 1.1%. Various parameters such as the effect of pH, volume of aqueous phase, choice of solvent, reagent and naphthalene concentration, shaking time and interference of a number of metal ions on the determination of trace amount of iridium have been studied in detail to optimize the conditions for its determination in synthetic samples corresponding to various standard alloys and environmental samples.     

The spectrophotometric determination of manganese(VII) after extraction with the trimethylene-bis(triphenylphosphonium) cation with microcrystalline naphthalene

Summary Manganese(VII) (0–120 g) can be determined spectrophotometrically at 548 nm after its adsorptive extraction at pH 6 as its trimethylene-bis(triphenylphosphonium) ion pair with microcrystalline naphthalene after dissolution of the solid phase in chloroform. The effects of pH, reagent conditions and diverse ions are reported. The system has been applied to the determination of manganese in a range of steels. For the determination of 60 g of manganese the relative standard deviation was 0.61%.

---

Spektralphotometrische Bestimmung von Mangan(VII) nach Extraktion mit dem Trimethylen-bis(triphenylphosphonium)- Kation mit Hilfe von mikrokristallinem Naphthalin

     

Spectrophotometric determination of iron after separation of its 9,10-phenanthrenequinone monoximate on microcrystalline naphthalene

A sensitive and selective spectrophotometric method has been developed for the determination of iron as Fe(II) or Fe(III) using 9,10-phenanthrenequinone monoxime (PQM) as the complexing agent. Fe(II) and Fe(III) react with PQM to form coloured water insoluble complexes which can be adsorbed on microcrystalline naphthalene in the pH ranges 3.7–6.2 and 2.0–8.4, respectively. The solid mass consisting of the metal complex and naphthalene is dissolved in DMF and the metal determined spectrophotometrically by measuring the absorbances Fe(II) at 745 nm and Fe(III) at 425 nm. Beer's law is obeyed over the concentration range 0.5–20.0 g of iron(II) and 20–170.0 g of Fe(III) in 10 ml of DMF solution. The molar absorptivities are 1.333 × 10⁴ 1 · mole^–1 · cm^–1 for Fe(II) and 2.428 × 10³1· mole^–1 · cm^–1 for Fe(III). The precision of determination is better than 1%. The interference of various ions has been studied and the method has been employed for the determination of iron in various standard reference alloys, bears, wines, ferrous gluconate, human hair and environmental samples.     

Spectrophotometric determination of cadmium(II) using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

The complex of cadmium with the reagent 2-(-5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) has been studied. The composition, stability constant, and free energy change of formation of the complex have been determined. A sensitive spectrophotometric method for the determination of cadmium has been developed and applied for a range of concentration of 0.4–4.0 μg/ml cadmium using the complex Cd-5-Br-PADAP. The optimum conditions for maximum sensitivity of determination such as standing time, pH, wavelength, and order of addition have been determined. The effect of foreign ions on this method has been also studied.     

Synthesis and properties of disulfonated (2-benzimidazolyl)(phenyl)methanone 5-nitro-2-pyridylhydrazone (S2BINPH) and spectrophotometric determination of trace amounts of nickel with S2BINPH

Disulfonated (2-benzimidazolyl)(phenyl)methanone 5-nitro-2-pyridylhydrazone (S₂BINPH) has been synthesized and its reactivity with metal ions investigated. A sensitive and selective spectrophotometric method for the determination of nickel with this reagent has been developed. S₂BINPH reacts with nickel(II) to form a stable 12 (metal ligand) complex with an absorption maximum at 501 nm. The complex formation is quantitative in the pH range 7.2–8.5. Beer's law is obeyed over the range 60–700 ng ml^–1 of nickel and the apparent molar absorptivity of the complex is 8.86 × 10⁴ mol^–1 1 cm^–1 at 501 nm. The proposed method was applied to the determination of nickel in a standard iron- and -steel sample with satisfactory results. Furthermore, proton dissociation constants of S₂BINPH and the overall formation constant of its nickel complex were also determined spectrophotometrically.     

Chromatographic preconcentration of copper in environmental and biological samples using 2,4,6-tri(2-pyridyl)-1,3,5-triazine-tetraphenylborate-naphthalene adsorbent

A method was established for the determination of trace amounts of copper using chromatographic preconcentration of copper(I) with 2,4,6-tri(2-pyridyl)-1,3,5-triazine and tetraphenylborate. Copper is quantitatively adsorbed on this adsorbent in the pH range 1.8–10.5 and at flow-rates of 0.2–10 ml/min. The solid mass consisting of copper complex along with naphthalene is dissolved from the column with 5 ml of dimethylformamide. A calibration curve is obeyed over the concentration range 0.2–10.0 g of copper in 5 ml of dimethylformamide. Eight replicate determinations of 3 g of copper gave a mean absorbance of 0.185 with a relative standard deviation of 1.4%. The characteristic concentration for 1% absorption is 0.0143 g/ml (0.103 gmg/ml for direct AAS in aqueous medium). The interference of various ion and salts has been studied and the proposed method has been employed to the determination of copper in biological and water samples.     

Complexometric determination of cadmium using 2-Mercaptoethanol as masking reagent

A complexometric method for the determination of cadmium(II) in presence of other metal ions is described based on the selective masking ability of 2-mercaptoethanol towards cadmium(II). Cadmium and other ions in a given sample solution are initially complexed with excess of EDTA and the surplus EDTA is titrated with lead nitrate solution at pH 5.0–6.0 (hexamethylentetramine), using xylenol orange as indicator. A known excess of 2-mercaptoethanol solution (10% alcoholic) is then added, the mixture is shaken well and the released EDTA from the Cd-EDTA complex is titrated against standard lead nitrate solution. The interferences of various ions are studied and the method is applied to the determination of cadmium in its complexes. Reproducible and accurate results are obtained for 3.5–25mg of Cd with relative errors 0.65% and standard deviations 0.06 mg.     

Solid phase preconcentration of iron as methylthymol blue complex on naphthalene-tetraoctylammonium bromide adsorbent with subsequent flame atomic absorption determination

A sensitive and selective preconcentration method for the determination of trace amounts of iron by atomic absorption spectrometry has been developed. Iron forms a complex with methylthymol blue at pH=3. This complex is retained by naphthalene tetraoctylammonium bromide adsorbent in a column with a height of about 2 cm. The adsorbed metal complex is then eluted from the column with nitric acid and its iron content is determined by flame atomic absorption spectrometry (FAAS). The effect of different variables such as pH, reagent concentration, flow rate and interfering ions on the recovery of the analyte was investigated. The calibration graph was linear in the range 25-350 ng ml⁻¹ of iron in the initial solution with r=0.9994. The limit of detection based on 3S_b criterion was 12 ng ml⁻¹ and the relative standard deviation for eight replicate measurements of 150 and 300 ng ml⁻¹ of iron was 3.1 and 1.8%, respectively. This procedure was successfully applied to the determination of iron in tap and sewage water samples.     

Atomic absorption spectrometric determination of trace zinc in alloys and biological samples after preconcentration with [1-(2-pyridylazo)-2-naphthol] on microcrystalline naphthalene

An atomic absorption spectrometric method for the determination of trace amounts of zinc after adsorption of its [1-(2-pyridylazo)-2-naphthol] complex on microcrystalline naphthalene has been developed. This complex is adsorbed on microcrystalline naphthalene in the pH range 3.5-7.5 from large volumes of aqueous solutions of various alloys and biological samples with a preconcentration factor of 40. After filtration, the solid mass consisting of the zinc complex and naphthalene was dissolved with 5 ml of dimethylformamide and the metal was determined by flame atomic absorption spectrometry. Zinc can alternatively be quantitatively adsorbed on [1-(2-pyridylazo)-2-naphthol]-naphthalene adsorbent packed in a column and determined similarly. About 0.5 ng of zinc can be concentrated in a column from 200 ml of aqueous sample, where its concentration is as low as 2.5 pg ml-1. The calibration curve is linear in the range 0.1-6.5 ng ml-1 in dimethylformamide solution. Eight replicate determinations of 2 ng ml-1 of zinc gave a mean absorbance of 0.145 with a relative standard deviation of 1.5%. The sensitivity for 1% absorption was 0.061 ng ml-1. Various parameters, such as the effect of pH and the interference of a number of metal ions on the determination of zinc, have been studied in detail to optimize the conditions for the determination of zinc in various standard complex materials.     

2‐Aminocyclopentene‐1‐Dithiocarboxylic Acid‐Naphthalene Adsorbent for the Preconcentration and Determination of a Trace Copper in Real Samples by Spectrophotometric Method

A solid uncharged complex produced from 2‐aminocyclopentene‐1‐dithiocarboxylic acid (synthetic reagent) on naphthalene provides a very sensitive, selective and economical method for the preconcentration and determination of trace amounts of copper in drug and alloy samples. The 2‐aminocyclopentene‐1‐dithiocarboxylate of copper is retained quantitatively on microcrystalline naphthalene in the pH range 2.8–3.3. After filtration the solid mass consisting of copper complex‐naphthalene is dissolved with 4 mL of dimethylformamide (DMF). The absorbance is measured at 462 nm with a spectrophotometer against the reagent blank and molar absorptivity found to be 2.8 × 10⁵ liter mol^?1 cm^?1. Beer's law is obeyed over the concentration range of 0.1–16.0 μg of copper in 4 mL of the dimethylformamide solution. Detection limit is 3 ng mL^?1 [signal to noise ratio = 2]. Ten replicate determinations on a sample containing 1 μg of copper gave a relative standard deviation of 0.76%. The interference of a large number of anions and cations have been studied and the optimized conditions developed were utilized for determination of copper in various real samples.     

Column preconcentration of trace manganese with the ion pair of 2-nitroso-1-naphthol-4-sulfonic acid tetradecyldimethylbenzyl-ammonium chloride supported on naphthalene and determination by derivative spectrophotometry

A column preconcentration method has been developed for the determination of trace amounts of manganese by preconcentration on 2-nitroso-1-naphthol-4-sulfonic acid (nitroso-S)-tetradecyldimethylbenzylammonium (TDBA) naphthalene as an adsorbent using a simple funnel tipped glass tube. Manganese reacts with nitroso-S to form a water soluble brown colored chelate anion. The chelate anion forms a water insoluble Mn-Nitroso-S-TDBA ion pair on naphthalene packed in a column in the pH range 9.6-10.5 at a flow rate of 1-2 ml/min. The solid mass consisting of manganese complex and naphthalene is dissolved in 5 ml of dimethylformamide (DMF) and the metal determined by second derivative spectrophotometry. The calibration curve is linear in the concentration range 0.25-35.0 micrograms of Mn in 5 ml of the final DMF solution. Eight replicate determinations of 25 micrograms of standard manganese solution give a mean peak height of 4.0 with a correlation coefficient of 0.9995 and relative standard deviation of +/- 1.1%. The sensitivity was calculated to be 0.502(d2 A/d lambda 2)/microgram ml-1 from the slope of the calibration curve. The detection limit was 0.020 microgram ml-1 for manganese at the minimum instrumental settings (signal to noise ratio = 2). Various parameters effecting the method such as the effect of pH, volume of aqueous phase and interference of a number of metal ions on the determination of manganese have been evaluated to optimize the conditions for its determination in standard alloys and biological samples.     

Spectrophotometric determination of zirconium with 9-methyl-2,3,7-trihydroxy-6-fluorone

Summary 9-Methyl-2.3.7-trihydroxy-6-fluorone has been used as a new colorimetric reagent for zirconium. The rose-red complex shows maximum absorption, against the reagent blank, at 500 nm and obeys Beer's law from 0.1 to 2.5 ppm. The optimum concentration range is from 0.66 to 2.5 ppm, where the per cent relative analysis error is 2.96. The composition of the complex, obtained from Job's method, indicates that the complex in solution contains the metal and the reagent in a ratio of 11. The instability constant of the complex is 1.07 · 10^–6.     

Ammonium tetraphenylborate-naphthalene adsorbent for the preconcentration and trace determination of uranium in standard alloys and synthetic samples using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol by fourth-derivative spectrophotometry

A solid ion-pair material produced from ammonium tetraphenylborate (ATPB) and naphthalene has been used for the preconcentration of uranium from the large volume of its aqueous complex samples. Uranium reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) to form a water insoluble, coloured complex. This complex is quantitatively retained on the ATPB-naphthalene adsorbent filled in a column in the pH range 7.0–9.5 and at a flow rate of 2 ml/min. The solid mass from the column is dissolved with 5 ml of dimethylformamide (DMF) and uranium is determined by fourth-derivative spectrophotometry. The calibration curve is linear over the concentration range of 0.13–15.0 g of uranium in 5 ml of the final DMF solution. Seven replicate determinations of 6 g of uranium gave a mean peak height (peak-to-peak signal between 592 nm and 582 nm) of 1.02 with a relative standard deviation of 0.95%. The sensitivity is 0.8419 (d⁴A/d⁴)/(g ml^–1) found from the slope of the calibration curve. The interference of a large number of anions and cations on the estimation of uranium has been studied and the method applied for the determination of uranium in coal fly ash, Zr-base alloy and some synthetic samples corresponding to standard alloys.     

Column chromatographic preconcentration of palladium in alloys with 9,10 phenanthrenequinonemonoxime-naphthalene

A solid chelating compound phenanthrenequinonemonoxime (PQM) supported on naphthalene provides a rapid, sensitive and economical means of preconcentration and separation of palladium from standard solutions and from synthetic samples. Palladium forms a complex with PQM supported on naphthalene in a column at pH 2.2-5.4 with a flow-rate of 1 ml/min. The metal complex and naphthalene are dissolved out from the column with 5 ml of CHCl(3) and the absorbance is measured at 430 nm or 500 nm against a reagent blank. Beers law is obeyed in the concentration range 3.0-56.0 mug and 6.0-42.0 mug at 430 nm and 500 nm respectively. The molar absorptivities are 2.10 x 10(4) and 1.69 x 10(4) 1.mole(-1).cm(-1) at 430 and 500 nm respectively.