Synthesis and characterization of 4‐arm star side‐chain liquid crystalline polymers containing azobenzene with different terminal substituents via ATRP

4‐Arm star side‐chain liquid crystalline (LC) polymers containing azobenzene with different terminal substituents were synthesized by atom transfer radical polymerization (ATRP). Tetrafunctional initiator prepared by the esterification between pentaerythritol and 2‐bromoisobutyryl bromide was utilized to initiate the polymerization of 6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate (MMAzo) and 6‐[4‐(4‐ethoxyphenylazo)phenoxy]hexyl methacrylate (EMAzo), respectively. The 4‐arm star side‐chain LC polymer with p‐methoxyazobenzene moieties exhibits a smectic and a nematic phase, while that with p‐ethoxyazobenzene moieties shows only a nematic phase, which derives of different terminal substituents. The star polymers have similar LC behavior to the corresponding linear homopolymers, whereas transition temperatures decrease slightly. Both star polymers show photoresponsive isomerization under the irradiation with UV–vis light. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3342–3348, 2007     

Synthesis and characterization of liquid crystalline elastomers bearing fluorinated mesogenic units and crosslinking mesogens

Several new side‐chain liquid crystalline (LC) polysiloxanes and elastomers ( IP ‐ VIP ) bearing fluorinated mesogenic units and crosslinking mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a fluorine‐containing LC monomer 4′‐undec‐10‐enoyloxy‐biphenyl‐4‐yl 4‐fluoro‐benzoate and a crosslinking LC monomer 4′‐(4‐allyloxy‐benzoxy)‐biphenyl‐4‐yl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques such as FTIR, ¹H‐NMR, EA, TGA, DSC, POM and XRD. The effect of crosslinking mesogens on mesomorphic properties of the fluorinated LC polymers was studied as well. The obtained polymers and elastomers were soluble in many solvents such as toluene, tetrahydrofuran, chloroform, and so forth. The temperatures at which 5% weight loss occurred (T_d) were greater than 250°C for all the polymers, and the weight of residue near 600°C increased slightly with increase of the crosslinking mesogens in the fluorinated polymer systems. The samples IP , IIP , IIIP and IVP showed both smectic A and nematic phases when they were heated and cooled, but VP and VIP exhibited only a nematic mesophase. The glass transition temperature (T_g) of polymers increased slightly with increase of crosslinking mesogens in the polymer systems, but the mesophase–isotropic phase transition temperature (T_i) and smectic A–nematic mesophase transition temperature (T_S‐N) decreased slightly. It suggests that the temperature range of the mesophase became narrow with the increase of crosslinking mesogens for all the fluorinated polymers and elastomers. In XRD curves, the intensity of sharp reflections at low angle decreased with increase of crosslinking mesogens in the fluorinated polymers systems, indicating that the smectic order derived from fluorinated mesogenic units should be destroyed by introduction of more crosslinking mesogens. Copyright © 2008 John Wiley & Sons, Ltd.     

Ordered nanostructures at two different length scales mediated by temperature: A triphenylene‐containing mesogen‐jacketed liquid crystalline polymer with a long spacer

A mesogen‐jacketed liquid crystalline polymer (MJLCP) containing triphenylene (Tp) moieties in the side chains with 12 methylene units as spacers (denoted as PP12V) was synthesized. Its liquid crystalline (LC) phase behavior was studied with a combination of solution ¹H NMR, solid‐state NMR, gel permeation chromatography, thermogravimetric analysis, polarized light microscopy, differential scanning calorimetry, and one‐ and two‐dimensional wide‐angle X‐ray diffraction. By simply varying the temperature, two ordered nanostructures at sub‐10‐nm length scales originating from two LC building blocks were obtained in one polymer. The low‐temperature phase of the polymer is a hexagonal columnar phase (Φ_H, a = 2.06 nm) self‐organized by Tp discotic mesogens. The high‐temperature phase is a nematic columnar phase with a larger dimension (a′ = 4.07 nm) developed by the rod‐like supramolecular mesogen—the MJLCP chain as a whole. A re‐entrant isotropic phase is found in the medium temperature range. Partially homeotropic alignment of the polymer can be achieved when treated with an electric field, with the polymer in the Φ_H phase developed by the Tp moieties. The incorporation of Tp moieties through relatively long spacers (12 methylene units) disrupts the ordered packing of the MJLCP at low temperatures, which is the first case for main‐chain/side‐chain combined LC polymers with MJLCPs as the main‐chain LC building block to the best of our knowledge. The relationship of the molecular structure and the novel phase behavior of PP12V has implications in the design of LC polymers containing nanobuilding blocks toward constructing ordered nanostructures at different length scales. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 295–304     

Branched Azobenzene Side‐Chain Liquid‐Crystalline Copolymers Obtained by Self‐Condensing ATR Copolymerization

Summary: The one step synthesis of a series of branched azobenzene side‐chain liquid‐crystalline copolymers by the self‐condensing vinyl copolymerization (SCVCP) of a methyl acrylic AB* inimer, 2‐(2‐bromoisobutyryloxy)ethyl methacrylate (BIEM), with the monomer 6‐(4‐methoxy‐azobenzene‐4′‐oxy)hexyl methacrylate (M), by atom transfer radical polymerization (ATRP) in the presence of CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as a catalyst system, and in chlorobenzene solvent, is reported. The degree of branching (DB), and the molecular weights and polydispersities of the resultant polymers were determined by NMR spectroscopy and size exclusion chromatography, respectively. The phase behaviors of the branched copolymers were characterized by differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). The degree of branching of the branched copolymers could be controlled by the comonomer ratio in the feed and influenced their liquid‐crystal properties. Liquid‐crystal properties were not exhibited when the comonomer ratio was low. Comonomer ratios greater than 8 gave polymers with a lower number of branches, which exhibited both a smectic and a nematic phase.

A polarized optical micrograph of the smectic phase texture of a polymer synthesized here with a higher comonomer feed ratio (magnification × 400).     

Liquid crystalline conjugated polymers and their applications in organic electronics

This article describes the syntheses and electro‐optical applications of liquid crystalline (LC) conjugated polymers, for example, poly(p‐phenylenevinylene), polyfluorene, polythiophene, and other conjugated polymers. The polymerization involves several mechanisms: the Gilch route, Heck coupling, or Knoevenagel condensation for poly(p‐phenylenevinylene)s, the Suzuki‐ or Yamamoto‐coupling reaction for polyfluorenes, and miscellaneous coupling reactions for other conjugated polymers. These LC conjugated polymers are classified into two types: conjugated main chain polymers with long alkyl side chains, namely main‐chain type LC polymers, and conjugated polymers grafting with mesogenic side groups, namely side‐chain type LC conjugated polymers. In general, the former shows higher transition temperature and only nematic phase; the latter possesses lower transition temperature and more mesophases, for example, smectic and nematic phases, depending on the structure of mesogenic side chains. The fully conjugated main chain promises them as good candidates for polarized electroluminescent or field‐effect devices. The polarized emission can be obtained by surface rubbing or thermal annealing in liquid crystalline phase, with maximum dichroic ratio more than 20. In addition, conjugated oligomers with LC properties are also included and discussed in this article. Several oligo‐fluorene derivatives show outstanding polarized emission properties and potential use in LCD backlight application. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2713–2733, 2009     

Amphiphilic mesogen‐jacketed liquid crystalline polymers: Design,synthesis, and self‐assembly behaviors

We synthesized a series of amphiphilic mesogen‐jacketed liquid crystalline (LC) polymers with a biphenyl side‐chain mesogen containing a carboxylic acid group on one side and an octyloxy group on the other, and the number of methylene units between the biphenyl core and the exterior carboxylic acid group was varied to adjust the mesophases and the amphiphilic nature. The polymers were obtained through conventional radical polymerizations and characterized by a combination of different techniques such as thermogravimetric analysis, differential scanning calorimetry, polarized light microscopy, and X‐ray scattering. The results revealed that the polymer without any methylene spacer, POBP‐0C, did not exhibit LC properties while POBP‐1C (n = 1) and POBP‐7C (n = 7) formed double layer smectic A (S_A) phases. The hydrogen bonding among the carboxylic acid groups and the segregation between the carboxylic acid groups and the alky chains played important roles in forming the mesophases. In addition, the solution self‐assembly behaviors were also preliminarily investigated through the fluorescent probe technique and transmission electron microscopy, and vesicles with uniform sizes were observed. The weak hydrophilicity and large degree of freedom of the carboxylic acid group and the relative rigidity of the polymer chain due to the “jacketing” effect were responsible for the formation of the structures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and hierarchical superstructures of side‐chain liquid crystal polyacetylenes containing galactopyranoside end‐groups

Three kinds of chiral saccharide‐containing liquid crystalline (LC) acetylenic monomers were prepared by click reaction between 2‐azidoethyl‐2,3,4,6‐tetraacetyl‐β‐D ‐galactopyranoside and 1‐biphenylacetylene 4‐alkynyloxybenzoate. The obtained monomers were polymerized by WCl₆‐Ph₄Sn to form three side‐chain LC polyacetylenes containing 1‐[2‐(2,3,4,6‐tetraacetyl‐β‐D ‐galactopyranos‐1‐yl)‐ethyl]‐1H‐[1,2,3]‐triazol‐4′‐biphenyl 4‐alkynyloxybenzoate side groups. All monomers and polymers show a chiral smectic A phase. Self‐assembled hiearchical superstructures of the chiral saccharide‐containing LCs and LCPs in solution state were studied by field‐emission scanning electron microscopy. Because of the LC behavior, the LC molecules exhibit a high segregation strength for phase separation in dilute solution (THF/H₂O = 1:9 v/v). The self‐assembled morphology of LC monomers was dependent upon the alkynyloxy chain length. Increasing the alkynyloxy chain length caused the self‐assembled morphology to change from a platelet‐like texture ( LC‐6 ) to helical twists morphology ( LC‐11 and LC‐12 ). Furthermore, the helical twist morphological structure can be aligned on the polyimide rubbed glass substrate to form two‐dimensional ordered helical patterns. In contrast to LC monomers, the LCP‐11 self‐assembled into much more complicate morphologies, including nanospheres and helical nanofibers. These nanofibers are evolved from the helical cables ornamented with entwining nanofibers upon natural evaporation of the solution in a mixture with a THF/methanol ratio of 3:7. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6596–6611, 2009     

Synthesis and properties of mesogen‐jacketed liquid crystalline polymers containing bistolane mesogen

On the basis of the concept of mesogen‐jacketed liquid crystalline polymers, a series of new methacrylate monomers, (2,5‐bis[2‐(4′‐alkoxyphenyl) ethynyl] benzyl methacrylate (MACn, n = 4, 6, 8, 10, and 12) and 2,5‐bis[2‐(6′‐decanoxynaphthyl) ethynyl] benzyl methacrylate (MANC10), and their polymers, PMACn (n = 4, 6, 8, 10, and 12) and PMANC10 were synthesized. The bistolane mesogen with large π‐electron conjugation were side‐attached to the polymer backbone via short linkages. Various characterization techniques such as differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized light microscopy were used to study their mesomorphic phase behavior. The polymer PMACn with shorter flexible substituents (n = 4) forms the columnar nematic (?_N) phase, but other polymers with longer flexible tails (n = 6, 8, 10, and 12) can develop into a smetic A (S_A) phase instead of a ?_N phase. The PMANC10 containing naphthyl can also form a well‐defined S_A phase. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

High‐molecular‐weight side‐chain liquid‐crystalline polyethers based on 4′‐cyanobiphenyl‐4‐oxy mesogenic groups

A set of poly[ω‐(4′‐cyano‐4‐biphenyloxy)alkyl‐1‐glycidylether]s were synthesized by the chemical modification of the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐cyano‐4′‐hydroxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yield and almost quantitative degree of modification. All side‐chain liquid‐crystalline polymers were rubbers soluble in tetrahydrofuran. The characterization by ¹H and ¹³C NMR revealed no changes in the regioregular isotactic microstructure of the starting polymer and the absence of undesirable side reactions such as deshydrobromination. The liquid crystalline behavior was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction. Polymers that had alkyl spacers with n = 2 and 4 were nematic, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C and showed some crystallization of the side alkyl chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3002–3012, 2004     

Tailoring the liquid crystalline property via controlling the generation of dendronized polymers containing azobenzene mesogen

The first‐ and second‐generation dendronized polymers containing azobenzene mesogen were designed and successfully synthesized via free radical polymerization. The chemical structures of the monomers were confirmed by elemental analysis, ¹H NMR, and ¹³C NMR. The molecular characterizations of the polymers were performed with ¹H NMR and gel permeation chromatography. The phase structures and transition behaviors were studied using differential scanning calorimetry, polarized light microscopy, and small‐angle X‐ray scatter experiments. The experiment results revealed that the first‐generation dendronized polymer exhibited liquid crystalline behavior of the conventional side‐chain liquid crystalline polymer with azobenzene mesogen, that is, the polymer exhibited smectic phase structure at lower temperature and nematic phase structure at higher temperature. However, the second‐generation dendronized polymers exhibited more versatile intriguing liquid crystalline structures, namely smectic phase structure at lower temperature and columnar nematic phase structure at higher temperature, and moreover, the phase structure still remained before the decomposition temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1149–1159, 2010     

Synthesis of novel three‐arm star azo side‐chain liquid crystalline polymer via ATRP and photoinduced surface relief gratings

A three‐arm star azo side‐chain liquid crystalline (LC) homopolymer, poly[6‐(4‐methoxy‐4‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO), was synthesized by atom transfer radical polymerization (ATRP) method. The polymerization of 6‐(4‐methoxy‐4‐oxy‐azobenzene) hexyl methacrylate proceeded in a controlled/“living” way. A series of three‐arm star LC block copolymers (PMMAZO‐b‐PMMA) were also synthesized. The polymers were characterized by ¹H NMR, gel permeation chromatograph, and UV–vis spectra, respectively. The both polymers of PMMAZO and copolymers of PMMAZO‐b‐PMMA exhibited a smetic phase and a nematic phase. As concern to the PMMAZO, the glass‐transition temperature (T_g) and phase‐transition temperature from the smetic to nematic phase and from the nematic to isotropic phase increased with the increase of molecular weight (M_n(GPC)) of PMMAZO. The phase transition temperature of the block copolymers, PMMAZO‐b‐PMMA, with the same PMMA block was similar to that of PMMAZO. However, the T_g of the PMMAZO‐b‐PMMA decreased at low azo content and then increased with the increasing M_n(GPC) when azo content was above 61.3%. With illumination of linearly polarized Kr⁺ laser beam at modest intensities (35 mW/cm²), significant surface relief gratings formed on PMMAZO films with different molecular weights were observed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 777–789, 2008     

Light scattering from a nematic monodomain in an electric field Twist elastic constant and viscosity coefficient of nematic polymer–solvent mixtures

Abstract

The light scattering technique was used to investigate the viscoelastic parameters characterizing director twist distortions in miscible nematic mixtures of 5CB (pentacyanobiphenyl) with two side chain liquid crystal polymers and a main chain liquid crystal polymer. By applying an AC electric field to homeotropically-aligned nematic monodomains of the mixtures, the field-dependent scattering intensities and director orientation fluctuation relaxation rates yield, respectively, the twist elastic constant K ₂₂ and viscosity coefficient γ₁. The results directly demonstrate that the addition of liquid crystal polymers causes substantial decreases of the relaxation rates for dynamic light scattering from the twist mode and these changes are due to small decreases in K ₂₂ coupled with large increases in γ₁. The decrements in K ₂₂ are comparable for both side chain and main chain liquid crystal polymers. The relative increase in the twist viscosity for the side chain liquid crystal polymers is much smaller than those of main chain polymers. A theoretical model is used to qualitatively interpret the difference between the viscous behaviour of the twist mode for both side chain and main chain liquid crystal polymers in a nematic solvent.     

Linear and A2+B3‐type hyperbranched polyesters comprising phenylbenzothiazole unit: Preparation,liquid crystalline,and optical properties

Novel liquid crystalline (LC) hyperbranched (HB) polyesters comprising phenylbenzothiazole (PBT) unit as mesogen in the interiors were prepared at various feed mole ratios (A₂/B₃) by solution polycondensation of a dioxydiundecanol derivative of PBT (A₂ monomer) with trimesic acid trimethyl ester (B₃ monomer) via A₂+B₃ approach and their LC and optical properties were investigated. Analogous linear polyesters containing the PBT unit in the main chains were also prepared by the solution polycondensation of A₂ monomer with aromatic or aliphatic dimethyl esters. FTIR and ¹H‐NMR spectroscopies indicated that the HB polyesters are produced without gelation during the polycondensation and have degree of branching (DB) of 7–46%. The structures of HB polymers changed depending on the feed mole ratios and the polymer prepared in the mole ratio of A₂/B₃ = 3/2 had the highest inherent viscosity and DB. Acetylation of terminal OH group‐having HB polyesters prepared in excess mole ratios of A₂/B₃ afforded ones bearing acetoxy groups in the terminals. DSC measurements, polarizing microscope observations of textures, and X‐ray analyses suggested that only the terminal OH group‐having HB polymer prepared in the mole ratio of A₂/B₃ = 3/1 form smectic C phase. In the linear polymers, the polymers derived by using the aromatic dimethyl esters had no LC melt, but those from the aliphatic dimethyl esters formed LC smectic C phase. The acetoxy group‐bearing HB polymers showed more stable smectic A or C phase than those with the OH terminals. Solution UV‐vis and photoluminescent (PL) spectra indicated that the linear and the HB polymers have analogous optical properties and display maximum absorbances and blue‐light emission on the basis of the PBT unit, where the Stokes shifts were observed because of intermolecular aggregation effects, but there is a large difference between the optical behaviors of the linear and the HB polymers in film, whose E_g values of the linear polymers decreased and those of the HB polymers vice versa. Quantum efficiencies (Φ) had a tendency of increase in the linear polymers and the HB polymers forming LC phases. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6688–6702, 2008     

Vinyl‐terminated side‐chain liquid‐crystalline polyethers containing mesogenic benzylideneaniline moieties

The synthesis of two vinyl‐terminated side‐chain liquid‐crystalline polyethers containing benzylideneaniline moieties as mesogenic cores was approached in two different ways: by chemically modifying poly(epichlorohydrin) with suitable mesogenic acids or by polymerizing analogous glycidyl ester or glycidyl ether derivatives. In all the conditions tested, the first approach led to materials in which the imine group was hydrolyzed. The second approach led to the desired polymers PG2a and PG2b , but only from the glycidyl ether derivatives and when the initiator was the system that combined polyiminophosphazene base t‐Bu‐P₄ and 3,5‐di‐t‐butylphenol. These polymers were chemically characterized by IR and ¹H and ¹³C NMR spectroscopies. The estimated degrees of polymerization ranged from 30 to 36. The liquid crystalline behavior of the synthesized polymers was studied by differential scanning calorimetry, polarized optical microscopy (POM) and X‐ray diffraction. Both polymers behave like liquid crystals and exhibited a single mesophase, which was recognized as a smectic C mesophase, probably with a bilayer arrangement, i.e., a smectic C₂ mesophase. The crosslinking of both polymers was performed with dicumyl peroxide as initiator, which led to liquid crystalline thermosets. POM and X‐ray diffraction confirmed that the mesophase organization mantained on the crosslinked materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1877–1889, 2006     

Macromolecular brushes synthesized by “grafting from” approach based on “click chemistry” and RAFT polymerization

Well‐defined macromolecular brushes with poly(N‐isopropyl acrylamide) (PNIPAM) side chains on random copolymer backbones were synthesized by “grafting from” approach based on click chemistry and reversible addition‐fragmentation chain transfer (RAFT) polymerization. To prepare macromolecular brushes, two linear random copolymers of 2‐(trimethylsilyloxy)ethyl methacrylate (HEMA‐TMS) and methyl methacrylate (MMA) (poly(MMA‐co‐HEMA‐TMS)) were synthesized by atom transfer radical polymerization and were subsequently derivated to azide‐containing polymers. Novel alkyne‐terminated RAFT chain transfer agent (CTA) was grafted to polymer backbones by copper‐catalyzed 1,3‐dipolar cycloaddition (azide‐alkyne click chemistry), and macro‐RAFT CTAs were obtained. PNIPAM side chains were prepared by RAFT polymerization. The macromolecular brushes have well‐defined structures, controlled molecular weights, and molecular weight distributions (M_w/M_n ≦ 1.23). The RAFT polymerization of NIPAM exhibited pseudo‐first‐order kinetics and a linear molecular weight dependence on monomer conversion, and no detectable termination was observed in the polymerization. The macromolecular brushes can self‐assemble into micelles in aqueous solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 443–453, 2010     

Side‐chain liquid crystalline polyacrylates containing 3,4‐disubstituted pyrrole moiety

Polymerization of liquid crystalline bifunctional monomer N‐{{ω‐{4‐[4‐(11‐acryloyloxy)undecanoxybenzoyl]biphenyleneoxy} alkyl}}‐3,4‐dimethylpyrrole gave a side‐chain liquid crystalline polyacrylate containing 3,4‐dimethylpyrrole group. Liquid crystallinity was determined by DSC and optical polarizing microscope measurements. The monomers having pentylene, hexylene, and decylene as the alkylene spacer group between the mesogenic unit and the 3,4‐dimethylpyrrole group exhibited smectic and nematic phases on the heating and cooling stages. The radically polymerized polyacrylate derivatives containing the 3,4‐dimethylpyrrole group showed nematic phases on the heating and cooling stages. These polymers are the first example of side‐chain liquid crystalline polymers containing 3,4‐dimethylpyrrole as functional group for further reaction. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1214–1221, 2000     

Synthesis of side‐chain liquid‐crystalline homopolymers and triblock copolymers with p‐methoxyazobenzene moieties and poly(ethylene glycol) as coil segments by atom transfer radical polymerization and their thermotropic phase behavior

A series of side‐chain liquid‐crystalline (LC) homopolymers of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with different degrees of polymerization were synthesized by atom transfer radical polymerization (ATRP), which were prepared with a wide range of number‐average molecular weights from 5.1 × 10³ to 20.6 × 10³ with narrow polydispersities of around 1.17. Thermal investigation showed that the homopolymers exhibit two mesophases, a smectic phase, and a nematic phase, and the phase‐transition temperatures of the homopolymers increase clearly with increasing molecular weights. A series of novel LC coil triblock copolymers with narrow polydispersities was synthesized by ATRP, and their thermotropic phase behavior was investigated with differential scanning calorimetry and polarized optical microscopy. The LC coil triblocks were designed to have an LC conformation of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with a wide range of molecular weights from 3.5 × 10³ to 1.7 × 10⁴ and the coil conformation of poly(ethylene glycol) (PEG) (number‐average molecular weight: 6000 or 12,000) segment. Their characterization was investigated with ¹H NMR, Fourier transform infrared spectra, and gel permeation chromatography. Triblock copolymers exhibited a crystalline phase, a smectic phase, and a nematic phase. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased, and the crystallization of PEG depressed with increasing molecular weight of the LC block. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2854–2864, 2003     

Influence of fluorinated substituent and terminal length on phase behavior of mesogen‐jacketed liquid crystalline polymers with a biphenyl mesogen

A series of mesogen‐jacketed liquid crystalline polymers, poly{2,2,3,3,4,4,4‐heptafluorobutyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PF3Cm, where m is the number of carbon atoms in the alkoxy groups, and m = 1, 4, 6, and 8), the side chain of which contains a biphenyl core with a fluorocarbon substituent at one end and an alkoxy unit of varying length on the other end, were designed and successfully synthesized via atom transfer radical polymerization. For comparison, poly{butyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PC4Cm), similar to PF3Cm but with a butyl group instead of the fluorocarbon substituent, was also prepared. Differential scanning calorimetric results reveal that the glass transition temperatures (T_gs) of the two series of polymers decrease as m increases and T_gs of the fluorocarbon‐substituted polymers are higher than those of the corresponding butyl‐substituted polymers. Wide‐angle X‐ray diffraction measurements show that the mesophase structures of these polymers are dependent on the number of the carbon atoms in the fluorocarbon substituent and the property of the other terminal substituent. Polymers with fluorocarbon substituents enter into columnar nematic phases when m ≥ 4, whereas the polymer PF3C1 exhibits no liquid crystallinity. For polymers with butyl substituents, columnar nematic phases form when the number of carbon atoms at both ends of the side chain is not equal at high temperatures and disappear after the polymers are cooled to ambient temperature. However, when the polymer has the same number of carbon atoms at both ends of the side chain, a hexagonal columnar phase develops, and this phase remains after the polymer is cooled. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and phase behaviour of a homologous series of polymethacrylate-based side-chain liquid crystal polymers

The homologous series of side chain liquid crystal polymers, the poly[ω-(4-methoxyazobenzene-4′-oxy)alkyl methacrylate]s, has been prepared in which the length of the flexible alkyl spacer has been varied from 3 to 11 methylene units. All the polymers exhibit liquid crystalline behaviour. The propyl and butyl members show exclusively nematic behaviour. The pentyl, hexyl, octyl and decyl members show a nematic and a smectic A phase while the heptyl, nonyl and undecyl homologues exhibit only a smectic A phase. The smectic A phase has been studied using X-ray diffraction and assigned as a smectic A₁ phase in which the side chains are fully overlapped and the backbones are confined to lie between the smectic layers. For the nonyl member an incommensurate smectic phase is observed. The dependence of the transition temperatures on the length of the flexible spacer is understood in terms of the average shapes of the side chains.     

Solution properties of dendronized poly(hydroxy ethyl methacrylate) polymers

Four generations of dendronized polymers with a methacrylate backbone and hydroxy‐functionalized aliphatic polyester dendrons based on 2,2‐bis(methylol)propionic acid were studied in solutions by rheological measurements, dynamic light scattering, turbidimetry, and ¹H NMR self‐diffusion measurements to reveal the effect of increasing hydrophilicity and molecular size on their solution properties. The studied polymers were interesting new amphiphiles with a hydrophobic main chain and a hydrophilic shell. Evidence of aggregation upon the heating of the first‐generation polymer in an aqueous solution was obtained by dynamic light scattering and turbidimetry, reflecting the effect of the hydrophobic polymer backbone, whereas the higher generation polymers did not show aggregation upon heating. Although the dimensions of the polymers were observed to increase with increasing generation, all the polymers exhibited low viscosities and Newtonian flow behavior in both aqueous and dimethyl sulfoxide solutions. The relative viscosities of the polymers in water and dimethyl sulfoxide showed that the conformation of the polymers was somewhat more open in dimethyl sulfoxide, and this led to higher viscosities than those in water, in agreement with the ¹H NMR diffusion measurements, by which the dimensions were found to be larger for the polymers dissolved in dimethyl sulfoxide. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3674–3683, 2006