Volume‐exclusion effects in polyethylene blends filled with carbon black,graphite, or carbon fiber

Conductive polymer composites possessing a low percolation‐threshold concentration as a result of double percolation of a conductive filler and its host phase in an immiscible polymer blend afford a desirable alternative to conventional composites. In this work, blends of high‐density polyethylene (HDPE) and ultrahigh molecular weight polyethylene (UHMWPE) were used to produce ternary composites containing either carbon black (CB), graphite (G), or carbon fiber (CF). Blend composition had a synergistic effect on electrical conductivity, with pronounced conductivity maxima observed at about 70–80 wt % UHMWPE in the CB and G composites. A much broader maximum occurred at about 25 wt % UHMWPE in composites prepared with CF. Optical and electron microscopies were used to ascertain the extent to which the polymers, and hence filler particles, are segregated. Differential scanning calorimetry of the composites confirmed that the constituent polymers are indistinguishable in terms of their thermal signatures and virtually unaffected by the presence of any of the fillers examined here. Dynamic mechanical analysis revealed that CF imparts the greatest stiffness and thermal stability to the composites. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1013–1023, 2002     

纤维状填料/HDPE复合体系的导电渗流与流变渗流行为的关系

研究了纤维状导电材料不锈钢纤维(SSF)填充高密度聚乙烯(HDPE)导电复合体系的导电渗流与流变渗流行为之间的关系,并与颗粒状导电颗粒炭黑(CB)/HDPE导电复合体系进行了比较.发现当SSF含量极低(0.3vol%)时,SSF/HDPE体系即发生导电渗流现象,且导电渗流转变区域极窄;而仅当SSF含量达到4.8vol%时,该复合体系才表现出流变渗流现象,这一结果与CB/HDPE体系及纳米级导电纤维填充体系截然不同.此外,通过正温度系数效应的研究发现SSF形成的导电通路稳定性高于CB/HDPE体系.我们认为,SSF/HDPE体系呈现的这些特点均与SSF较大的直径及长径比且其导电通路及流变渗流网络的形成机理不同有关.     

Relationship between electrical resistivity and particle dispersion state for carbon black filled poly (ethylene-<Emphasis Type="Italic">co</Emphasis>-vinyl acetate)/poly (<Emphasis Type="SmallCaps">L</Emphasis>-lactic acid) blend

It is known that the electrical volume resistivity of insulating polymers filled with conductive fillers suddenly decreases at a certain content of filler. This phenomenon is called percolation. Therefore, it is known that controlling resistivity in the semi-conductive region for carbon black (CB) filled composites is very difficult. When poly (ethylene-co-vinyl acetate) (EVA) is used as a matrix, the percolation curve becomes gradual because CB particles disperse well in EVA. In this study, the relationship between the dispersion state of CB particles and electrical resistivity for EVA/poly (L-lactic acid) (PLLA) filled with CB composite was investigated. The apparent phase separation was seen in the SEM photograph. It was predicted that the CB particles located into the EVA phase in the light of thermodynamical consideration, which was estimated from the wetting coefficient between polymer matrix and CB particles. The total surface area per unit mass of dispersed CB particles in the polymer blend matrix was estimated from small-angle X-ray scattering and the volume resistivity decreased with increasing CB content. The values of the surface area of CB particles in CB filled EVA/PLLA (25/75 wt%) and EVA/PLLA (50/50 wt%) polymer blends showed a value similar to that of the CB filled EVA single polymer matrix. In electrical volume resistivity measurement, moreover, the slopes of percolation curves of EVA/PLLA (25/75 wt%) and EVA/PLLA (50/50 wt%) filled with CB composite are similar to that of EVA single polymer filled with CB composite. As a result, it was found that CB particles selectively locate in the EVA phase, and then the particle forms conductive networks similar to the networks in the case of EVA single polymer used as a matrix.     

Preparing iPP/HDPE/CB functionally gradient materials: influence factors of components and processing

In this work, gradient materials with low electrical resistivity were prepared by compounding isotactic polypropylene (iPP)/high density polyethylene (HDPE) blends with carbon black (CB) through extruding and injection molding. Contact angle measurements and morphology measurements showed that the CB particles were selectively located in HDPE phase and the final composites had a gradient structure that the HDPE/CB phase exhibited different morphologies in the skin layer and core layer of the composites under different processing procedures. The main factors influencing the formation of the functional gradient materials (FGM), including screw speed during extruding, iPP types and CB contents were discussed. They affect the phase morphology by shear stress, the restoration of HDPE phase, and the viscosity ratio of polymer blends, respectively. In conclusion, iPP/HDPE/CB FGM could be formed easily in the composites blending with the iPP type with narrow molecular weight distribution (MWD) and higher CB content extruded at higher screw speed. The electrical properties of iPP/HDPE/CB composites were studied and the results showed that screw speed in extrusion significantly influenced the percolation curve and electrical property of the final composites. Copyright © 2011 John Wiley & Sons, Ltd.     

Polymeric positive-temperature-coefficient materials: dynamic curing effect

The object of this work was to prepare high-density polyethylene (HDPE)/ethylene–propylene–diene terpolymer (EPDM)/conductive carbon black (CB) composites by dynamic curing and to characterize the positive-temperature-coefficient (PTC) performances of the composites.EPDM and dicumyl peroxide were preblended in a research mill. The roll-milled strands were blended with HDPE and CB in a Haake mixer. The sheet resistivity and morphology of the HDPE/EPDM/CB composites with or without the dynamic curing process were investigated. It was concluded that the dynamically cured blends exhibit better PTC performance than the simple blends without dynamic curing. The effects of shear intensity and dicumyl peroxide content during the dynamic curing process were discussed for the PTC characteristics of the HDPE/EPDM/CB composites.     

CB/HDPE导电复合体系中Kerner-Nielson方程修正及电渗流与粘弹渗流的相关性

随着导电填料含量的增加,聚合物导电复合材料的电导率呈现非连续的递增.当填料含量达到渗流阈值并导致渗流现象出现时,导电填料相互聚集并形成网络,体系电导率急剧增大,关于此类电渗流现象已有很多报道^[1～4].填充类导电复合材料的结构和性能与其粘弹性密切相关.近年来,由于炭黑填充使得许多光学方法失效,流变学方法受到了广泛重视.最新的研究发现,非均相结构的出现和演化对浓度的依赖性有着特征流变响应,是一种粘弹渗流现象^[5～7].     

Resistivity-Temperature Behavior of CB-Filled HDPE Foaming Composites

High-density polyethylene/carbon black foaming conductive composites were prepared from acetylene black（ACEY） and super conductive carbon black（HG-1P） as conductive filler, low-density polyethylene（LDPE） as the second component, ethylene-vinyl acetate（EVA） and ethylene propylene rubber（EPR） as the third component, azobisformamide（AC） as foamer, and dicumyl peroxide（DCP） as cross-linker. The structure and resistivity-temperature behavior of high-density polyethylene（HDPE）/CB foaming conductive composites were investigated. Influences of carbon black, LDPE, EVA, EPR, AC, and DCP on the foaming performance and resistivity-temperature behavior of HDPE/CB foaming conductive composites were also studied. The results reveal that HDPE/CB foaming conductive composite exhibits better switching characteristic; ACET-filled HDPE foaming conductive composite displays better positive temperature coefficient（PYC） effect; whereas super conductive carbon black（HG-1P）-filled HDPE foaming conductive composite shows better negative temperature coefficient（NTC） effect.     

Conduction stability of high-density polyethylene/carbon black composites due to electric field action

Conduction stability of high-density polyethylene/carbon black (HDPE/CB) composites with a CB volume fraction slightly above the percolation threshold is studied in relation to electric field action at various ambient temperatures below the melting point of HDPE. It is found that resistance of the composites shows considerable changes after the electric field is switched off. Influence of irradiation crosslinking of HDPE on the conduction stability is also discussed.     

Influence of multiwall carbon nanotubes on morphology and electrical conductivity of PP/ABS blends

Polypropylene (PP) and acrylonitrile‐butadiene‐styrene (ABS) blends with multiwall carbon nanotubes (MWNT) were prepared by melt mixing. PP/ABS blends without MWNT revealed coarse co continuous structures on varying the ABS content from 40 to 70 wt %. Bulk electrical conductivity of the blends showed lower percolation threshold (0.4–0.5 wt %) in the 45/55 co continuous blends whereas the percolation threshold was between 2 and 3 wt % in matrix‐particle dispersed morphology of 80/20 blends. Interestingly, droplet size was observed to decrease with addition of MWNT above percolation threshold in 80/20 blends. Further, the bulk electrical conductivity was found to be dependent on the melt flow index of PP. The non‐polar or weakly polar nature of blends constituents resulted in the temperature independent dielectric constant, dielectric loss, and DC electrical conductivity. Rheological analysis revealed the formation of 3D network‐like structure in 80/20 PP/ABS blends at 3 wt % MWNT. An attempt was made to understand the relationship between rheology, morphology, and electrical conductivity of these blends. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2286–2295, 2008     

Effects of thermal volume expansion on positive temperature coefficient effect for carbon black filled polymer composites

Polymeric positive temperature coefficient (PTC) materials have been prepared by incorporating carbon black (CB) into two different polymer matrices, crystalline high density polyethylene (HDPE) and amorphous polystyrene (PS). The effects of thermal volume expansion on the electrical properties of conductive polymer composites were studied. The volume fraction of conductive particles behaves like a switch from insulator to conductor in the polymeric PTC composite. Our mathematical model and experimental model have proved that the abrupt resistivity increase at PTC transition range and at the percolation curve close to the critical volume fraction for both polymeric PTC composites have the same conductive mechanism. The thermal expansion is one of the key factors responsible for the PTC effect and can be seen by comparing the PTC transition curves from model predictions and experiment. Furthermore, the model predicts PTC curves of CB/PS composite more successfully than it does for the CB/HDPE composite, and the reasons for this are also discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3078–3083, 2007     

Resistivity control in the semiconductive region for carbon-black-filled polymer composites

It is known that the electrical volume resistivity of insulating polymers filled with conductive fillers, such as metal particles and/or carbon black (CB) particles, suddenly decreases at a certain content of the filler. Therefore, it is very difficult to control the resistivity in the semiconductive region for the CB-filled composites. We examined two effects to control the electrical volume resistivity in the semiconductive region for CB-filled polymer composites. One is the effect of fluorination of the CB surface on the percolation behavior using surface-fluorinated CB particles as a filler. The other is the effect of copolymerization of polyethylene (PE) with a vinyl acetate (VA) functional group on the percolation behavior using poly(ethylene-co-VA) (EVA) as a matrix. By immersion heat measurements, it was found that the London dispersive component turned out to be the predominant factor of the surface energy of fluorinated CBs. The London dispersive component of the surface energy significantly decreased, while the polar component slightly increased on increasing the fluorine content. The resistivity of fluorinated a CB-filled low-density PE composite showed that the percolation threshold increased, and the transition from the insulating state to the conductive state became sluggish, on increasing the fluorine content. In the case of using EVA as a matrix, on the other hand, the percolation curve was moderated with the increase in the VA content. Therefore, copolymerization of PE with VA is also suitable for the design of a semiconductive polymer composite as well as for fluorination of the CB surface. The total surface area per unit mass of dispersed CB particles in the EVA matrix estimated from small-angle X-ray scattering decreased with increasing CB content. Further, the decrease in the surface area is moderated with an increase in VA content. It was found that the difference in the percolation curve is due to the difference in the dispersive state of CB particles.     

粒子填充HDPE复合体系动态流变行为研究

研究了炭黑(CB)和石墨(GP)填充高密度聚乙烯(HDPE)复合体系的动态流变行为.发现高填料含量时出现似固体行为,并认为它归因于无机粒子网络逾渗结构的形成.在相同聚合物基体条件下,粒子种类和粒子几何参数(粒子形状、大小、粒径分布)对低频区域流变行为、流变参数的逾渗行为和逾渗阈值(φ_c)有决定性影响,且种类的影响相比于粒子几何参数更为显著.此外,高表面活性及高比表面积(大径厚比、小尺寸)粒子填充体系具有较低的φ_c.     

Estimation of the agglomeration structure for conductive particles and fiber‐filled high‐density polyethylene through dynamic rheological measurements

A study on the correlation between electrical percolation and viscoelastic percolation for carbon black (CB) and carbon fiber (CF) filled high‐density polyethylene (HDPE) conductive composites was carried out through an examination of the filler concentration (?) dependence of the volume resistivity (ρ) and dynamic viscoelastic functions. For CB/HDPE composites, when ? was higher than the modulus percolation threshold (?_G ～ 15 vol %), the dynamic storage modulus (G′) reached a plateau at low frequencies. The relationship between ρ and the normalized dynamic storage modulus (G_c^′/G_p^′, where G_c^′ and G_p^′ are the dynamic storage moduli of the composites and the polymer matrix, respectively) was studied. When ? approached a critical value (?_r), a characteristic change in G_c^′/G_p^′ appeared. The critical value (G_c^′/G^′_p)c was 9.80, and the corresponding ?_r value was 10 vol %. There also existed a ? dependence of the dynamic loss tangent (tan δ) and a peak in a plot of tan δ versus the frequency when ? approached a loss‐angle percolation (?_δ = 9 vol %). With parameter K substituted for A, a modified Kerner–Nielson equation was obtained and used to analyze the formation of the network structure. The viscoelastic percolation for CB/HDPE composites could be verified on the basis of the modified equation, whereas no similar percolation was found for CF/HDPE composites. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1199–1205, 2004     

电响应聚合物薄膜的表面图案化

研究了炭黑(CB)和石墨(GP)填充高密度聚乙烯(HDPE)复合体系的动态流变行为.发现高填料含量时出现似固体行为,并认为它归因于无机粒子网络逾渗结构的形成.在相同聚合物基体条件下,粒子种类和粒子几何参数(粒子形状、大小、粒径分布)对低频区域流变行为、流变参数的逾渗行为和逾渗阈值(φc)有决定性影响,且种类的影响相比于粒子几何参数更为显著.此外,高表面活性及高比表面积(大径厚比、小尺寸)粒子填充体系具有较低的φc.     

Viscoelastic properties of ionic polymer composites reinforced by soy protein isolate

Both linear and nonlinear viscoelastic properties of ionic polymer composites reinforced by soy protein isolate (SPI) were studied. Viscoelastic properties were related to the aggregate structure of fillers. The aggregate structure of SPI is consisted of submicron size of globule protein particles that form an open aggregate structure. SPI and carbon black (CB) aggregates characterized by scanning electron microscope and particle size analyzer indicate that CB aggregates have a smaller primary particle and aggregate size than SPI aggregates, but the SPI composites have a slightly greater elastic modulus in the linear viscoelastic region than the CB composites. The composite containing 3–40 wt % of SPI has a transition in the shear elastic modulus between 6 and 8 vol % filler, indicating a percolation threshold. CB composites also showed a modulus transition at <6 vol %. The change of fractional free volume with filler concentration as estimated from WLF fit of frequency shift factor also supports the existence of a percolation threshold. Nonlinear viscoelastic properties of filler, matrix, and composites suggested that the filler‐immobilized rubber network generated a G′ maximum in the modulus‐strain curves and the SPI formed a stronger filler network than the CB in these composites. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3503–3518, 2005     

聚乙烯/聚并苯复合材料室温电阻率变化规律研究

以新型导电材料聚并苯替代碳黑作为导电填料制备聚乙烯/聚并苯复合物.确定了复合物渗流转变区,并解释渗流转变现象的产生机理.从聚并苯含量和热处理过程,对聚乙烯/聚并苯复合物室温电阻率变化规律进行讨论.结果表明,聚并苯质量分数在20%～40%之间是聚乙烯/聚并苯复合物渗流转变区;热处理有利于聚乙烯晶区完善排列,也有利于导电链形成;以聚并苯作为导电填料所制备的复合物具有较高的PTC强度;辐射交联可以提高聚乙烯/聚并苯复合物PTC强度,抑制NTC效应.     

Positive‐temperature‐coefficient/negative‐temperature‐coefficient effect of low‐density polyethylene filled with a mixture of carbon black and carbon fiber

Low‐density polyethylene (LDPE) filled with carbon black (CB) and carbon fiber (CF) composites were prepared by a conventional melt‐mixing method. The effects of a mixture of CB and CF on the positive‐temperature‐coefficient (PTC) effect and the negative‐temperature‐coefficient (NTC) effect, as well as the percolation threshold, were examined in detail. A synergy effect between CB and CF occurred, in that continuous conductive pathways formed within the CB/CF‐filled composite. The percolation threshold was moved to a reduced filler content with the addition of CF to an LDPE/CB composite. A model was proposed to explain the difference in the PTC behavior of composites containing CB and CF and composites containing only CB or CF. In addition, the NTC effect was weakened with a mixture of CB and CF, and a relatively small radiation dose was required to eliminate the NTC phenomenon in LDPE/CB/CF composites. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3094–3101, 2003     

超细颗粒填充高密度聚乙烯复合体的导电和流变学性质(英文)

制备了多壁碳纳米管、石墨和碳黑填充高密度聚乙烯(HDPE)复合体,研究了复合体的导电和流变学性质.利用隧道逾渗模型对关键指数分别为4.4、6.4和2.9的三种复合体的"非普适性"导电行为进行了解释.与此同时,考察了颗粒类型和含量,以及剪切速率对复合体流变学性质的影响.结果表明,复合体系的储能模量在低频区出现"第二平台",而复合黏度则表现出强烈的剪切变稀行为,标志着颗粒在聚合物内部发生聚集形成了网络结构.与石墨和碳黑填充复合体相比,具有更高纵横比的多壁碳纳米管填充复合体具有更高的储能模量和复合黏度.基于Guth-Smallwood理论结合有效介近似的G′r分析结果表明,填充HDPE复合体系的流变学逾渗阈值和导电逾渗阈值吻合良好.     

Blends of carbon blacks and multiwall carbon nanotubes as reinforcing fillers for hydrocarbon rubbers

The reinforcement of a styrene‐butadiene rubber (SBR) by single fillers—carbon black (CB) or multiwall carbon nanotubes (MWNTs)—or by mixtures of CB and MWNTs, is investigated. The morphologies, mechanical and electrical properties of the composites, are analyzed. A significant improvement in the tensile properties is observed for samples containing a dual phase. Using atomic force (AFM) and transmission electron (TEM) microscopies, we demonstrate that the double loading improves the dispersion of the nanotubes in SBR. Electrical measurements show lower resistivity and a lower percolation threshhold for composites containing blends of fillers, which provides further evidence of better dispersion. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 46: 1939–1951, 2008     

Electrical properties of carbon black‐filled polymer composites

This work deals with the dielectric properties of conductive composite materials, which consist of thermoplastic polypropylene (PP) matrix filled with carbon black (CB). The CB concentration was systematically varied in a wide range. Our main interest is focused on the investigation of electrical conductivity mechanism and related percolation phenomena in these materials. To study the electrical and dielectric properties of composites we used broadband ac dielectric relaxation spectroscopy (DRS) techniques in a wide temperature range. By measurements of complex dielectric permittivity, ϵ*, the dependence of ac conductivity, σ_ac, and dc conductivity, σ_dc, on the frequency, the temperature and the concentration of the conductive filler was investigated. The behavior of this system is described by means of percolation theory. The percolation threshold, P_C, value was calculated to be 6.2 wt.% CB. Both, dielectric constant and dc conductivity follow power‐law behavior, yielding values for the critical exponents, which are in good agreement with the theoretical ones. Indications for tunneling effect in the charge carriers transport through the composites are presented. The temperature dependence of dc conductivity gives evidence for the presence of positive temperature coefficient (PTC) effect.