Synthesis and characterization of new AB-type poly(etherimide)s containing bisphenol moieties

A series of new AB-type poly(etherimide)s having bisphenol-type moiety was prepared by the one-pot polyimidization using triphenylphosphite(TPP) in N-methyl-2-pyrrolidone(NMP)/pyridine solution at 150°C. Complete cyclodehydration was observed in the polymerizations as well as in model reactions. Polymers were obtained with inherent viscosities in the 0.27–0.49 dL/g range. The M_n and M_w/M_n of poly[4-(1,4-phenyleneoxy-1,4-phenylenehexafluoro-isopropylidene-1,4-phenylene)oxyphthalimide] (4d) with η_inh = 0.49 dL/g were 73,400 g/mol and 1.5, respectively. Most polymers could readily be dissolved in common organic solvents such as DMAc, NMP, and m-cresol. The polymer 4d was soluble even in chloroform. These polymers had glass transition temperatures between 205 and 235°C, and 5% weight loss temperatures in the range of 511–532°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3530–3536, 1999     

Novel polymers with a high carboxylic acid loading

Click chemistry has been used to prepare a range of novel polymers with pendant carboxylic acid side groups. Four azido carboxylic acids, either mono‐ or difunctional and aliphatic or aromatic, have been prepared and thoroughly characterized. Extensive model reactions with 1‐ethyl‐4‐hydroxybenzene, the simplest model for poly(4‐hydroxystyrene), and the four azido carboxylic acids have been conducted to establish the proper reaction conditions and provide an analytical frame for the corresponding polymers. Poly(4‐hydroxystyrene) moieties in three different polymers—poly(4‐hydroxystyrene), poly(4‐hydroxystyrene‐co‐methyl methacrylate), and poly(4‐hydroxystyrene‐b‐styrene)—have been quantitatively transformed into oxypropynes by the use of either Williamson or Mitsunobu strategies and subsequently reacted with the azido carboxylic acids. Detailed differential scanning calorimetry investigations of all the polymers in general exhibit [when poly(4‐hydroxystyrene) is a substantial part] significant changes in the glass‐transition temperature from the polar poly(4‐hydroxystyrene) (120–130 °C) to the much less polar alkyne polymers (46–60 °C). A direct correlation between the nature of the pendant groups in the derivatized polymers and the glass‐transition temperature has emerged: the aromatic carboxylic acids give high glass‐transition temperatures (90–120 °C), and the aliphatic carboxylic acids give lower glass‐transition temperatures (50–65 °C). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:6360–6377, 2006     

Synthesis of urea‐containing ABA triblock copolymers: Influence of pendant hydrogen bonding on morphology and thermomechanical properties

Reversible addition‐fragmentation chain transfer (RAFT) polymerization produced novel ABA triblock copolymers with associative urea sites within pendant groups in the external hard blocks. The ABA triblock copolymers served as models to study the influence of pendant hydrogen bonding on polymer physical properties and morphology. The triblock copolymers consisted of a soft central block of poly(di(ethylene glycol) methyl ether methacrylate) (polyDEGMEMA, 58 kg/mol) and hard copolymer external blocks of poly(2‐(3‐hexylureido)ethyl methacrylate‐co‐2‐(3‐phenylureido)ethyl methacrylate) (polyUrMA, 18‐116 kg/mol). Copolymerization of 2‐(3‐hexylureido)ethyl methacrylate (HUrMA) and 2‐(3‐phenylureido)ethyl methacrylate (PhUrMA) imparted tunable hard block T_g's from 69 to 134 °C. Tunable hard block T_g's afforded versatile thermomechanical properties for diverse applications. Dynamic mechanical analysis (DMA) of the triblock copolymers exhibited high modulus plateau regions (∼100 MPa) over a wide temperature range (−10 to 90 °C), which was indicative of microphase separation. Atomic force microscopy (AFM) confirmed surface microphase separation with various morphologies. Variable temperature FTIR (VT‐FTIR) revealed the presence of both monodentate and bidentate hydrogen bonding, and pendant hydrogen bonding remained as an ordered structure to higher than expected temperatures. This study presents a fundamental understanding of the influence of hydrogen bonding on polymer physical properties and reveals the response of pendant urea hydrogen bonding as a function of temperature as compared to main chain polyureas. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1844–1852     

Synthesis of phosphate‐pendant polymers and their application to thermally latent polymeric initiators

A novel phosphate monomer, O‐p‐(methacryloyloxymethyl)benzyl O,O‐diethyl phosphate (MDP) was synthesized by the reaction of diethyl phosphorochloridate with 1,4‐benzenedimethanol, followed by the reaction with methacryloyl chloride in the presence of triethylamine. The radical polymerization of MDP and copolymerization with methyl methacrylate were carried out in the presence of 2,2′‐azobisisobutyronitrile (3 mol %) in dimethylacetamide at 60 °C for 20 h to afford phosphate‐pendant polymers. The polymerization of glycidyl phenyl ether (GPE) was carried out with the phosphate‐pendant polymer as an initiator in the presence of ZnCl₂. The polymerization did not proceed below 90 °C but rapidly proceeded above 90 °C to afford polyGPE. The phosphate‐pendant polymer served as a good thermally latent polymeric initiator. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3365–3370, 2001     

Structure–initiator activity dependence of aminimides as thermally latent initiators in the polymerization of glycidyl phenyl ether

Novel aliphatic aminimides were synthesized from the corresponding carboxylic acid esters, 1,1‐dimethylhydrazine, and epoxides in 54–95% yields. Bulk polymerization of glycidyl phenyl ether (GPE) with 3 mol % of the aminimides was evaluated by DSC as a model process for curing of epoxy resin. All the aminimides showed no exothermic DSC peak below 120 °C but showed sharp exothermic peaks above 137 °C, indicating good thermal latency. Good relationships were observed between the calculated bond length from the carbonyl carbon to the α‐carbon of the aliphatic group (R C), DSC onset temperatures, and the thermal dissociation temperatures (T_d 's) of the aminimides. The aminimide with a longer R C bond length showed lower T_d and DSC onset temperature, that is, higher activity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3428–3433, 2000     

Rigid‐rod polyamides and polyimides prepared from 4,3″‐diamino‐2′,6′‐di(2‐naphthyl)‐p‐terphenyl and 2′,6′,3‴,5‴‐tetra(2‐naphthyl)‐4,4″‐diamino‐p‐quinquephenyl

A series of rigid‐rod polyamides and polyimides containing p‐terphenyl or p‐quinquephenyl moieties in backbone as well as naphthyl pendent groups were synthesized from two new aromatic diamines. The polymers were characterized by inherent viscosity, elemental analysis, FT‐IR, ¹H‐NMR, ¹³C‐NMR, X‐ray, differential scanning calorimetry (DSC), thermomechanical analysis (TMA), thermal gravimetric analysis (TGA), isothermal gravimetric analysis, and moisture absorption. All polymers were amorphous and displayed T_g values at 304–337°C. Polyamides dissolved upon heating in polar aprotic solvents containing LiCl as well as CCl₃COOH, whereas polyimides were partially soluble in these solvents. No weight loss was observed up to 377–422°C in N₂ and 355–397°C in air. The anaerobic char yields were 57–69% at 800°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 15–24, 1999     

Thermal rearrangements of polybutadienes with different vinyl contents

A study was made of the loss of double bonds in equibinary (1,4-1,2) polybutadiene (EB) and in polybutadienes with 30% 1,2, 70% 1,4 (FI), and 10% 1,2, 90% 1,4 (DI) double-bond content, when heated in vacuum under nonpyrolytic conditions (temperature range 220–280°C). These polymers were found to undergo second-order loss of 1,2 unsaturation with similar activation energies (E_a = 34.0 ± 3 kcal/mole), by analogy to the previously reported thermally induced loss of double bonds in 1,2-polybutadiene (VB) (E_a = 33.6 ± 3 kcal/mole). Moreover, EB and FI exhibited also second-order loss of 1,4 unsaturation, with E_a ca. 36 and 40 kcal/mole, respectively, while DI showed negligible loss of 1,4 unsaturation below 260°C, in common with cis-1,4-polybutadiene (CB) (with 2% 1,2 double bonds) examined earlier. The loss of 1,2 double bonds in the various polybutadienes with different vinyl contents is accompanied by substantial methyl production, ranging from about one methyl group formed for every 4–5 vinyl units lost in VB, to one methyl for every two vinyls lost in EB, and to almost one methyl for each vinyl lost in DI or CB. Mechanisms are proposed for the thermally induced loss of 1,2 and 1,4 unsaturation in various polybutadienes and for the accompanying methyl production.     

Reversible gelation of poly(dimethylsiloxane) with ionic and hydrogen‐bonding substituents

Poly(dimethylsiloxane) copolymers containing a small fraction of carboxylic acid or Zn‐carboxylate groups were prepared and compared regarding reversible gelation by hydrogen‐bonding and ion‐pair interaction. The polymers were synthesized by condensation of a t‐butylcarboxylate functionalized dichlorosilane with an α,ω‐dihydroxy‐poly(dimethylsiloxane), followed by thermal cleavage of the ester bond. Neutralization of the resulting carboxylic acid substituents was achieved by addition of Zn (acac)₂. Reversible crosslinking was investigated by step stress and oscillating shear experiments. The carboxylic acid containing poly(dimethylsiloxane) became rubberlike upon increasing the temperature and liquified again when it was brought back to room temperature. This observation has been explained tentatively by segregation of the carboxylic acid groups into polar domains at high temperatures [i.e., a behavior like it is observed for systems with a lower critical solution temperature (LCST)]. At ambient temperature, the carboxylic acid groups undergo hydrogen bonding to the Si–O–Si backbone. Clustering of the carboxylic acid groups occurs only as these hydrogen bonds break upon raising temperature. Moisture was found to have a strong influence on the reversal of the crosslinking. Addition of zinc acetylacetonate resulted in the formation of an elastic network already at ambient conditions consistent with the concept of ionomers which undergo reversible gelation by formation of ion‐pair multiplets and clusters in the hydrophobic polymer matrix in particularly at low temperatures. At high temperature, both the carboxylic acid and the carboxylate sample exhibited a rather similar viscoelastic behavior consistent with a common structure where transient crosslinks are formed by clusters of the carboxylic acid and the carboxylate groups. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 485–495, 1999     

Synthesis and characterization of polyesteramides derived from an oxazoline-functional alcohol and dicarboxylic acid anhydrides

Novel polyesteramides were synthesized by copolymerization in bulk of 5-(4,5-dihydro-1,3-oxazol-2-yl)-1-pentanol and various cyclic dicarboxylic acid anhydrides at temperatures varying between 120 and 200°C. The polymers resulting from polycondensation were characterized by means of ¹H–NMR, FTIR, MALDI–TOF–MS, SEC, and DSC. The glass transition temperatures, T_g, of the copolymers were varied between −28 and +31°C as a function of the anhydride type. Molecular weights, M_w, were dependent on reaction temperature, reaction time, and anhydride type. Spectroscopic investigation of reaction products and esteramide model compounds provided evidence for imide by-product formation, which accounts for the low degree of polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3367–3376, 1999     

Synthesis and properties of novel soluble poly(amide‐imide)s with different pendant substituents

Two types of novel fluorinated diimide‐diacid monomers—[2,2′‐(4,4′‐(3′‐methylbiphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (III) and [2,2′‐(4,4′‐(3′‐(trifluoromethyl)biphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (IV)—were respectively designed and prepared by the condensation of diamines I and II with two molar equivalents of trimellitic anhydride. From both diimide‐diacids, two series of novel poly(amide‐imide)s (PAIs) (IIIa–IIIe and IVa–IVe) bearing different pendant groups were prepared by direct polymerization with various aromatic diamines (a–e). All the PAIs had a high glass transition temperatures (T_gs, 232–265 °C), excellent thermal stability (exhibiting only 5% weight loss at 493–542 °C under nitrogen) and good solubility in various organic solvents due to the introduction of the bulky pendant groups. The cast films of these PAIs (80–90 μm) had good optical transparency (73–81% at 450 nm, 85–88% at 550 nm and 87–89% at 800 nm) and low dielectric constants (2.65–2.98 at 1 MHz). The spin‐coated films of these PAIs presented a minimum birefringence value as low as 0.0077–0.0143 at 650 nm and low optical absorption at the near‐infrared optical communication wavelengths of 1310 and 1550 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3243–3252     

Gel formation in cationic polymerization of divinyl ethers. II. 2,2-Bis{4-[(2-vinyloxy)ethoxy]phenyl}propane

Cationic polymerization of 2,2-bis{4-[(2-vinyloxy)ethoxy]phenyl}propane [CH₂CH O CH₂CH₂O C₆H₄ C(CH₃)₂ C₆H₄ OCH₂CH₂ O CHCH₂; 2], a divinyl ether with oxyethylene units adjacent to the polymerizable vinyl ether groups and a bulky central spacer, was investigated in CH₂Cl₂ at 0°C with the diphenyl phosphate [(C₆H₅O)₂P(O)OH]/zinc chloride (ZnCl₂) initiating system. The polymerization proceeded quantitatively and gave soluble polymers up to 85% monomer conversion. In the same fashion as the polymerization of 1,4-bis[2-vinyloxy(ethoxy)]benzene (CH₂CH O CH₂CH₂O C₆H₄ OCH₂CH₂ O CHCH₂; 1) that we already studied, the content of the unreacted pendant vinyl ether groups of the produced soluble polymers decreased with monomer conversion, and almost all the pendant vinyl ether groups were consumed in the soluble products prior to gelation. Alternatively, endo-type double bonds were gradually formed in the polymer main chains by chain transfer reactions and other side reactions as the polymerization proceeded. The polymerization behavior of isobutyl vinyl ether (3), a monofunctional vinyl ether, under the same conditions, showed that the endo-type olefins in the polymer backbones are of no polymerization ability with the growing active species involved in the present polymerization systems. These results indicate that the intermolecular crosslinking reactions occurred primarily by the pendant vinyl ether groups, and the final stage of crosslinking process leading to gelation also may occur by the small amount of the residual pendant vinyl ether groups (supposedly less than 2%). The formation of the soluble polymers that almost lack the unreacted pendant vinyl ether groups is most likely due to the frequent occurrence of intramolecular crosslinking reactions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1931–1941, 1999     

Synthesis and properties of poly(arylene ether)s bearing sulfonic acid groups on pendant phenyl rings

Two kinds of new aromatic poly(arylene ether)s containing sulfonic acid groups were synthesized. Polymer 1 composed of tetraphenylphenylene ether and perfluorobiphenylene units was sulfonated with chlorosulfonic acid. Sulfonation took place only at the para position of the pendant phenyl rings. The average degree of sulfonation per repeating unit (m) was controlled from 1 to 4. Sulfonated polymer 2 with m = 3 was soluble in methanol and dimethyl sulfoxide and swelled in water. Incorporating bis(3,5‐dimethylphenyl)sulfone moieties into the sulfonated polymer imparts less methanol affinity. Polymers 4 with 30–65 mol % tetrakis(sulfophenyl)phenylene ether units has high decomposition temperatures above 300 °C, hydrophilicity, and good hydrolytic stability. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3211–3217, 2001     

Thermally Crosslinkable and Chemically Modifiable Aromatic Polyesters Possessing Pendant Propargyloxy Groups

New aromatic (co)polyesters containing pendant propargyloxy groups were synthesized by phase transfer‐catalyzed interfacial polycondensation of 5‐(propargyloxy)isophthaloyl chloride (P‐IPC) and various compositions of P‐IPC and isophthaloyl chloride with bisphenol A. FTIR and NMR spectroscopic data, respectively, revealed successful incorporation of pendant propargyloxy groups into (co)polyesters and formation of (co)polyesters with desired compositions. (Co)polyesters exhibited good solubility in common organic solvents such as chloroform, dichloromethane, and tetrahydrofuran and could be cast into transparent, flexible, and tough films from chloroform solution. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.77–1.33 dL/g and 43,600–118,000 g/mol, respectively, indicating the achievement of reasonably high‐molecular weights. The 10% weight loss temperatures of (co)polyesters were in the range 390–420 °C, demonstrating their good thermal stability. (Co)polyesters exhibited T_g in the range 146–170 °C and T_g values decreased with increase in mol % incorporation of P‐IPC. The study of non‐isothermal curing by DSC indicated thermal crosslinking of (co)polyesters via propargyloxy groups. The utility of pendant propargyloxy group was demonstrated by post‐modification of the selected copolyester with 1‐(4‐azidobutyl)pyrene, 9‐(azidomethyl)anthracene, and azido‐terminated poly(ethyleneglycol) monomethyl ether via copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction. FTIR and ¹H NMR spectra confirmed that click reaction was quantitative. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 588–597     

Synthesis and characterization of novel polyimides with bulky pendant groups

New dianhydrides containing t‐butyl and phenyl pendant groups have been synthesized and used as monomers, together with commercial diamines, to prepare novel polyimides. The influence of the chemical structure of the monomers on their reactivity has been studied by quantum semiempirical methods. The polyimides have been characterized by FTIR and by NMR in the case of soluble polymers. The presence of pendant groups and the method used to imidize polyimide precursors greatly affected polymer properties such as solubility, glass transition temperature, thermal stability, and mechanical properties. As a rule, the novel polyimides showed better solubility in organic solvents than the parent polyimides. Glass transition temperatures in the range 250–270°C and decomposition temperatures over 520°C were observed for the set of current polymers. Tensile strengths up to 135 MPa and mechanical moduli up to 3.0 GPa were measured on films of the current polyimides. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 805–814, 1999     

A novel synthesis of polyethers with pendant hydroxyl groups by polyaddition of bis(oxetane)s with bis(phenol)s

The polyaddition of 1,4-bis[(3-ethyl-3-oxetanyl)methoxymethyl]benzene (BEOB) with 3,3′,5,5′-tetrachlorobisphenol A (TCBPA) was examined with or without catalysts. High molecular weight polymer (polymers 1) (M_n = 13,600) with pendant primary hydroxyl groups was obtained in a 99% yield without any gel products when the reaction was performed with 5 mol % of tetraphenylphosphonium bromide as a catalyst in NMP at 160°C for 96 h. However, when the reaction was carried out without a catalyst under the same conditions, a low molecular weight polymer (M_n = 3200) was obtained in a 51% yield. The structure of the resulting polymer was confirmed by IR, ¹H-NMR, and ¹³C-NMR spectra. In this reaction system, it was also found that tetraphenylphosphonium iodide and crown ether complexes such as 18-crown-6 (18-C-6)/KBr and 18-C-6/KI have high catalytic activity. Polyadditions of 1,4-bis[(3-methyl-3-oxetanyl)methoxymethyl]benzene with TCBPA and BEOB with 3,3′,5,5′-tetrabromobisphenol-S were also examined, and corresponding polymers (polymers 2 and 3) were obtained in good yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2781–2790, 1999     

Viscoelastic properties of supramolecular soft materials with transient polymer network

A series of supramolecular soft materials with hydrogen bonded transient networks was prepared by blending carboxy‐terminated telechelic poly(ethyl acrylate) (PEA‐(COOH)₂) and polyethyleneimine (PEI). Effects of PEA‐(COOH)₂ molecular weight (M_PEA) and the blend ratio on the viscoelastic properties were investigated by rheological and small angle X‐ray scattering measurements. Rubbery plateau appeared by adding PEI due to network formation with ionic hydrogen bonded crosslinks between amines on PEI and carboxylic acids on PEA‐(COOH)₂. The highest temperature of a storage modulus‐loss modulus crossover as well as the highest flow activation energy was attained at a certain mole ratio of amines to carboxylic acids, irrelevant to M_PEA, indicating optimized supramolecular networks were achieved by stoichiometric balance of two functional groups. Since telechelic PEA‐(COOH)₂ serves as a network strand, the plateau modulus was inversely proportional to M_PEA, which was consistent with the correlation length between crosslinks estimated by X‐ray scattering measurements. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 755–764     

Synthesis and characterization of new cardo polyimides prepared from 5,5-Bis[4-(4-aminophenoxy)phenyl]-4,7-methanohexahydroindane

A new cardo diamine monomer, 5,5-bis[4-(4-aminophenoxy)phenyl]-4,7-methanohexahydroindane (II), was prepared in two steps with high yield. The monomer was reacted with six different aromatic tetracarboxylic dianhydrides in N,N-dimethylacetamide (DMAc) to obtain the corresponding cardo polyimides via the poly(amic acid) precursors and thermal or chemical imidization. All the poly(amic acid)s could be cast from their DMAc solutions and thermally converted into transparent, flexible, and tough polyimide films which were further characterized by x-ray and mechanical analysis. All of the polymers were amorphous and the polyimide films had a tensile strength range of 89–123 MPa, an elongation at break range of 6–10%, and a tensile modulus range of 1.9–2.5 GPa. Polymers V_c, V_e, and V_f exhibited good solubility in a variety of solvents such as N-methyl-2-pyrrolidinone (NMP), DMAc, N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), pyridine, γ-butyrolactone, and even in tetrahydrofuran and chloroform. These polyimides showed glass-transition temperatures between 274 and 299°C and decomposition temperatures at 10% mass loss temperatures ranging from 490 to 521°C and 499 to 532°C in nitrogen and air atmospheres, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2815–2821, 1999     

Click chemistry‐based synthesis of azo polymers for second‐order nonlinear optics

Four linear polymers containing pendant azo moiety were synthesized through click chemistry for second‐order nonlinear optical study. The polymers were found soluble in most of the polar organic solvents such as tetrahydrofuran (THF), chloroform, and dimethyl formamide (DMF). The polymers showed thermal stability up to 300 °C and glass transition temperatures (T_g) in the range of 120–140 °C. The molecular weights (M_w) of these polymers (measured by gel permeation chromatography) were in the range 37,900–55,000 g/mol. The polymers were found to form optically transparent films by solution casting from THF solution. Order parameters were calculated from UV–vis absorption spectra. The morphology changes in the films after poling were characterized by atomic force microscopy. The angular dependence, temperature dependence, and time dependence of second harmonic generation (SHG) intensity were obtained by using 1064 nm Nd:YAG laser. The SHG intensity remained unchanged up to 95 °C. At room temperature, it remained stable up to 8 days after initial drop of about 14%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Investigation of thiol‐ene addition reaction on poly(isoprene) under UV irradiation: Synthesis of graft copolymers with “V”‐shaped side chains

Poly(isoprene) (PI) with pendant functional groups was successfully synthesized by thiol‐ene addition reaction under 365 nm UV irradiation, and the functionalized PI was further modified and used to prepare graft copolymers with “V”‐shaped side chains. First, the pendant ? SCH₂CH(OH)CH₂OH groups were introduced to PI by thiol‐ene addition reaction between 1‐thioglycerol and double bonds, and the results showed that the addition reaction carried out only on double bonds of 1,2‐addition isoprene units. After the esterification of hydroxyl groups by 2‐bromoisobutyryl bromide, the forming macroinitiator was used to initiate the atom transfer radical polymerization (ATRP) of styrene (St) and tert‐butyl acrylate (tBA), and the graft copolymers PI‐g‐PS ₂ and PI‐g‐PtBA ₂ or PI‐g‐PAA ₂ (by hydrolysis of PI‐g‐PtBA ₂) were obtained, respectively. It was confirmed that the graft density of side chains on PI main chains could be easily controlled by variation of the contents of modified 1,2‐addition isoprene units on PI. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3797–3806, 2010     

Design of photoresists with reduced environmental impact. II. Water‐soluble resists based on photocrosslinking of poly(2‐isopropenyl‐2‐oxazoline)

The performance of water‐ and solvent‐cast, two‐component photoresist films containing poly(2‐isopropenyl‐2‐oxazoline) or poly(2‐isopropenyl‐2‐oxazoline‐co‐styrene) with a photoacid generator has been investigated. These materials afford negative‐tone images after deep‐UV exposure and development in a suitable medium (water or toluene). Resist solutions prepared from polymers containing at least 80 mol % 2‐isopropenyl‐2‐oxazoline may be cast from and developed in pure water. Features of higher quality can be obtained when the resist is cast from 2‐methoxyethanol, probably because side reactions such as partial hydrolysis of the pendant oxazoline rings in aqueous environments are avoided. It was possible to resolve micrometer scale patterns using ca. 200 mJ/cm² of irradiation at 254 nm, followed by heating 2 min at 130°C and development in water alone. Image quality and etch resistance were improved using copolymers containing up to 20 mol % of styrene repeat units. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1225–1236, 1999