Gas chromatographic study of acetyl derivates of chlorinated guaiacols

Summary The gas chromatography of acetyl derivatives of guaiacol and all chlorinated guaiacols has been studied on SE-30, OV-351 and Carbowax 20M capillary columns. The retention order and relative retention times under isotermal and temperature-programmed conditions are discussed. Different retention times for all mono- and dichloro compounds have been observed on the SE-30 column. However, all trichloroguaiacol isomers were separated only on polar columns. The best overall temperature-programmed separations have been achieved on an SE-30 capillary column.     

Glass capillary gas chromatography of chlorinated methyl acetates,propanoates and butanoates on Carbowax 20M and SE-30 columns

Summary The gas chromatography of all chlorinated methyl acetates, methyl propanoates and methyl mono- and dichlorobutanoates has been studied on Carbowax 20M and SE-30 glass capillary columns under various running conditions. The order of elution on a non-polar column was largely determined by the boiling point of esters, whereas on a polar column it was much influenced by the structure of compounds. Complete separation of the combined mixture of all 27 compounds could not be achieved, however, methyl 3,3-dichlorobutanoate was the only ester overlapped on both columns in spite of the various column temperatures used. The best separation of the mixture was on Carbowax 20M with a temperature program from 50°C at 8°C/min, isothermal running conditions leading either to poor separation of volatile components or long analysis time and broad peaks of higher chlorinated esters. The relative retention times for compounds at the various column temperatures are given and the retention order on a polar and on a non-polar column discussed.     

Simultaneous determination of C1−C8 n-alkyl acetates and corresponding mono-, di- and trichloroacetates on glass capillary columns with programmed temperature rise

Summary Gas chromatography of mixtures of aliphaticn-alkyl acetates (CH₃–COOR), chloroacetates (CHCl₂–COOR), dichloroacetates (CHCl₂–COOR) and trichloroacetates (CCl₃–COOR), where the alcohol chain length (R) varied between 1 and 8, has been studied on SE-30, Carbowax 20M and OV-351 glass capillary columns with programmed temperatures from 50°C at 2, 4, 6, 8 and 10°C/min. Compounds in the homologous series are eluted in the direct order from methyl ton-octyl acetate. The isomeric chloro esters are eluted on SE-30 according to their boiling points in the order: mono-, di- and trichloro isomer, whereas on polar columns di- and trichloro esters are eluted in the reverse order. The complete separation of all 32 individual components from the mixture could not be reached by any single column, the best separation occurred on SE-30. The mixture can, however, be separated by using columns with polar and non-polar stationary phases. The relative retention times for the compounds are given and the retention order discussed.     

Radioimpurity identification by retention index in tritium labeling

Retention indexes (RI's) on SE-30 and Carbowax 20M columns are characteristic and can be used for identification purposes. A method for predicting RI on the basis of the number of atoms and contributions from substituents and functional groups is discussed. This method establishes a structure retention index relationship (SRIR), capable of relating structure to RI and is useful for suggesting structure to match with radioactive peaks. Examples of labeled side products tentatively identified in this manner are given.     

Fatty acids. VII. The gas-liquid chromatographic properties of all dimethylene interrupted methyl cis,cis-octadecadienoates.

The gas-liquid chromatographic behaviour of all the dimethylene interrupted methyl cis,cis-octadecadienoates was studied on polar (Carbowax 20M, FFAP, DEGA, DEGS and Silar 10C), semi-polar (XE-60) and non-polar (SE-30, OV-101 and Apiezon L) stationary phases. The equivalent chain length of each isomer is recorded; the possibility of separation and the retention pattern of these isomers are discussed.     

Determination of volatiles in spirits using combined stationary phases in capillary GC

Summary The analysis of spirits with a single stationary phase is still an unsolved problem; the two amyl alcohols, ethyl acetate and acetal are not separated on a polar column, methanol and acetaldehyde coelute from an apolar column. Trials with coupled columns of different polarities showed that optimum results were obtained with a 40 m capillary column, comprising 6 m of Carbowax 20 M, 12 m of 1:1 Carbowax 20M:OV1 mixture and 30 m of PS 264. Best results were achieved when a 1 m retention gap was used, injecting a small amount of sample and using a 7 cm syringe needle.     

Selective retention of explosives and related compounds on gas-chromatographic capillary columns coated with lanthanide(III) β-diketonate polymers

The purpose of this research was to investigate coating capillary columns with lanthanide(III) β-diketonate polymers to provide gas-chromatographic columns with selectivity toward explosives and related compounds. Capillary columns were statically coated with a mixture of a lanthanide(III) β-diketonate polymer, which utilized p-di(4,4,5,5,6,6,6-heptafluoro-1,3-hexanedionyl)benzene (dihed) as a ligand, and SE-30. A novel coating technique was developed that used a methanol-containing azeotrope to provide solubility for both polymers while maintaining a low boiling point compatible with static coating. As based on temperature-programmed retention indices, the experimental columns displayed selective retention of nitroaromatic, nitroalkane, and nitrate ester test probes relative to an appropriate SE-30 control column. Selective retention was more pronounced for strongest Lewis base analyte contained in the test mixture (i.e., cyclohexanone). Relative analyte retention on the La(dihed), Tb(dihed), and Eu(dihed) columns are discussed relative to Lewis acidity and solubility of the polymer in the azeotropic coating solution.     

Sensitivity of the methylbenzenes and chlorobenzenes retention index to column temperature, stationary phase polarity, and-number and chemical nature of substituents

Retention indices of methylbenzenes and chlorobenzenes on two fused silica capillary columns, HP-5 (diphenylsiloxane 5% diphenyldimethylsiloxane) and ZB-WAX (polyethylene glycol), have been calculated at various isothermal temperatures and compared with literature data. The retention index temperature effect was studied for each solute, finding greater retention index the higher the column temperature. A comparison between the straight line fit and the fit to the recently proposed equation I = A + B/T +C ln T was carried out. The effect of the stationary phase polarity on the retention index was checked. In general, a greater retention index was found for the more polar stationary phase. The retention indices of the chlorobenzenes are greater than the retention indices of the methylbenzenes, irrespective of the stationary phase and the column temperature. In addition, the influence of the methyl/chlorine substitution on the benzene molecule was investigated at each temperature. The retention indices increased as the number of substituents (methyl/chlorine) increased. The retention index increments of methyl and chloro derivatives are also discussed, which permits to compare the effect of both, methyl or chlorine, chemical functions, for a fixed substituent number in the benzene molecule.     

Fatty acids. IV. Synthesis of all the dimethylene-interrupted methyl octadecadiynoates and a study of their gas-liquid chromatographic properties.

All the dimethylene-interrupted methyl octadecadiynoates have been synthesised and the gas-liquid chromatographic behaviour of these isomers was studied on polar [Carbowax 20M, FFAP, DEGA, DEGS and Silar 10C (recently renamed as Apolar 10C)], semi-polar (XE-60) and non-polar (SE-30, OV-101 and Apiezon L) stationary phases. The possibility of identification and separation of these isomers is discussed. The delta3a,7a isomer was found to decompose on most polar phases and the delta2a,6a isomer could not be eluted from the Carbowax 20M phase.     

Simultaneous gas chromatographic determination of aliphatic C2−C20 n-carboxylic acids and their methyl esters using SE-30 and OV-351 quartz capillary columns

Summary Simultaneous determination of aliphatic C₂–C₂₀ carboxylic acids and their methyl esters was carried out using SE-30 and OV-351 quartz capillary columns with temperature programming. Complete resolution of all 36 components was achieved. On SE-30 the methyl ester and the corresponding free acid are eluted in turn, whereas on OV-351 acetic acid eluted after methyl octanoate, after which the C_n methyl ester and C_n-6 carboxylic acid (n>9) are eluted one after the other. A non-polar SE-30 column is better for long-chain acids giving sharp peaks without tailing, the analysis time of the mixture being less than 16 minutes. The weight response correction factors for compounds under optimum operating conditions are given.     

Permethylated β-cyclodextrin in liquid poly(oxyethylene) as a stationary phase for capillary gas chromatography

This paper reports the study of poly(oxyethylene) as a solvent for heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin (PM-β-CD) and the potential of these mixtures for constructing enantioselective gas chromatography columns. Enantioseparations of volatile racemic mixtures using capillaries coated with 10–50% PM-β-CD diluted in Carbowax 20M were evaluated. The influence of the polymer type on retention, separation and reproducibility over a period of time is critically discussed. The poly(oxyethylene)-based columns were also compared to columns prepared by dilution of PM-β-CD in two polysiloxanes, SE-30 and SE-54, at several temperatures. Finally, we evaluated a new stationary phase prepared by crosslinking the chiral selector to the poly(oxyethylene) matrix.     

单萜/顺丁烯二酸酐加成物及其酯类衍生物的气相色谱法分析

 摘要：研究了单萜/顺酐加成物及其酯化衍生物在OV-17和SE-30柱上的某些色谱性能和定量分析的线性相应关系。结果表明,这两种化合物在涂渍量为5％～10％的OV-17和SE-30柱上均能正常出峰;在峰形对称性和出峰时间上,OV-17柱具有优势。260℃以后,色谱峰面积与汽化温度无关。     

Stimultaneous quantitative analysis using dual capillary columns of different polarities

Complex organic mixtures, such as coal liquefaction and oil shale products and by-products, are comprised of hundreds or thousands of individual components. State-of-the-art high resolution gas chromatography does not always provide sufficient resolution to allow accurate quantitation or identification of many compounds of interest. The concept of dual capillary column chromatography combines the different resolving characteristics of two capillary columns coated with different stationary phases into a single chromatographic run. In this approach, both columns are connected to the same injection port. Analysis of complex mixtures in this fashion can confirm the identification and quantitation of components on two columns of different polarity with little increased analysis time, can provide a means of obtaining quantitative data for individual components which are known to coelute on any one column, and can alert one to unknown coelution problems that would be undetected by gas chromatographic analysis on a single capillary column. Simultaneous dual column analysis was applied to three samples, the neutral polycyclic aromatic hydrocarbon (PAH) fraction of a Solvent Refined Coal-II (SRC-II) heavy distillate, the nitrogen-containing polycyclic aromatic compound (N-PAC) fraction of an SRC-II heavy distillate, and the basic fraction from a shale oil process water. Fused silica capillary columns coated with SE-54 and Durawax 3 were used for the analyses of the heavy distillate, while SE-54 an Carbowax 20M capillary columns were used for the analysis of the process water.     

Gas-liquid chromatographic analyses : IV. Glass capillary gas chromatography of methyl and chloromethyl monochloro esters of aliphatic C5-carboxylic acids

The gas chromatography of methyl and chloromethyl esters of pivalic, 2-methylbutyric, isovaleric and valeric acid and certain of their monochloro derivatives was studied. Separation of the combined mixtures of methyl and chloromethyl esters was better on Carbowax 20M than on SE-30. The retention times of esters with subtituents adjacent (i.e. at C-2) to the carboxyl group appear to be sensitive to column polarity, particularly in the case of the chloromethyl esters. The retention order and relative retention times of compounds are discussed.     

Use of carbowax 20M glass capillary columns below their lower temperature limit

The optimal separation properties of Carbowax 20M as a stationary phase in 300-m glass capillary columns at temeperatures below its lower temperature limit (60°) in terms of the selectivity, efficiency and speed of the gas chromatographic analysis of isomeric C₁₀---₁₃n-alkenes were investigated.In the separation of isomeric n-alkenes two possible states of the Carbowax stationary phase below 60° were used (solid state and intermediate liquid state), and the dependence of the retention of the isomers on temperature was studied. The region of the hysteresis portion of the I^CW = f(T)diagram permits the continuous setting of column selectivity. The efficiency of the column at temperatures below the lower temperature limit of Carbowax 20M depends on the spatial cis-trans configuration of n-alkenes and, in the solid state, for cis-isomers is comparable to the high efficiency of this column at higher temperatures (115°). Utilization of Carbowax 20M in the solid state made it possible to achieve faster and more complete separations of the eleven possible positional and spatial isomers of n-tridecenes in comparison with previous methods.     

Comparison of surface modification techniques used for the preparation of wall coated open tubular glass capillary columns

Summary Comparison of different techniques for modifying internal glass surfaces to accept a substrate loading on wall coated open tubular columns (WCOT) were examined. Inner surfaces pretreated with a non-extractable Carbowax 20M layer, barium carbonate and silica whiskers were prepared and coated with a Carbowax 20M liquid phase. The columns were evaluated for efficiency, acidic-basic and adsorption properties, thermal stability and coating efficiency. Column performances were also assessed for deactivated surfaces. Each column was applied to a standard mixture of Aroclor 1016.     

Gas-liquid chromatography of thioesters of perfluorocarboxylic acids 1. Characteristics of retention

Retention of thioesters of perfluoropentanoic acid C₄F₉C(O)SR was studied by GLC on packed and capillary columns using stationary phases SE-30, SKTFT-50X, XE-60, and Carbowax 20M. The retention indices of these compounds were calculated, and their relationship with the structure of the compounds and the conditions of the analysis were established. Translated fromIzvestiya Akademii, Nauk. Seriya Khimicheskaya, No. 5, pp. 984–986, May, 1997.     

Prediction of retention indexes. IV. Chain branching in alkylbenzene isomers with C10-13 alkyl chains identified in a scintillator solvent.

Twenty solvent components in a commercial scintillator were identified by chromatography on polar and non-polar columns and by gas chromatography-mass spectrometry (GC-MS) as isomeric 1-(alkyl)m(alkyl)nbenzenes with formulae C16H26, C17H28, C18H30 and C19H32. These isomers occur in four clusters of chromatographic peaks representing ca. 6, 44, 34 and 16% of the total solvent mass. The retention indexes of the isomers are influenced by the lengths of the alkyl chains in the molecule, and their polarity and polarizability can affect the column difference, which is the difference between retention indexes on polar and non-polar columns. 1-Methylalkylbenzenes have higher retention indexes and larger column differences than the evenly distributed isomers, such as 1-butylhexyl-1-pentylhexyl, 1-pentylheptyl- and 1-pentyloctylbenzene. The results demonstrate the effect of structural symmetry on the retention indexes of the isomers. This study shows that the ability to relate GC data and column differences to structures can facilitate the interpretation of GC-MS data in the structure identification of isomers.     

单壁碳纳米管+SE-30毛细管柱的制备研究及对多种物质的拆分

使用单壁碳纳米管(SWNTs)作气相色谱的固定相, 并用静态涂渍法在单壁碳纳米管内壁涂渍浓度不同的SE-30固定液. 为考察固定液浓度不同的几根毛细管柱的柱性能, 对多种物质进行了拆分, 并将该拆分结构与直接涂渍SE-30柱的毛细管柱性能进行对照. 实验结果表明: 键合了SWNTS再涂渍SE-30的毛细管柱较之直接涂渍SE-30的毛细管柱拆分效果有所改进, 但存在一定的拖尾现象. 此外, 前者对气体有较好的拆分效果, 且其效果随SE-30浓度按一定规律变化. 从分离性能来看, 键合了SWNTS再涂渍SE-30的固定相对气体的分离具有较好的效果.     

毛细管气相色谱法研究硝基氨基甲苯异构体在SE-30、SE-54中的热力学性质

通过对色谱分离过程的热力学处理, 得到了用毛细管色谱法测定溶质在溶剂中的溶解热力学性质的关系式, 利用该式测定了硝基氨基甲苯的五种异构体在SE-30, SE-54固定液中的溶解焓和溶解熵, 并对结果进行了定性解释。