Study of the dynamics of surface molecules by time-resolved sum-frequency generation spectroscopy

Sum-frequency generation (SFG) is a nonlinear laser-spectroscopy technique suitable for analysis of adsorbed molecules. The sub-monolayer sensitivity of SFG spectroscopy enables vibrational spectra to be obtained with high specificity for a variety of molecules on a range of surfaces, including metals, oxides, and semiconductors. The use of ultra-short laser pulses on time-scales of picoseconds also makes time-resolved measurements possible; this can reveal ultrafast transient changes in molecular arrangements. This article reviews recent time-resolved SFG spectroscopy studies revealing site-hopping of adsorbed CO on metal surfaces and the dynamics of energy relaxation at water/metal interfaces. Time-resolved sum frequency generation spectroscopy at surfaces with non-resonant laser pulse irradiation     

和频光谱研究油酸包覆的Fe3 O4 纳米颗粒

采用红外-可见和频振动光谱研究了表面包覆油酸分子的Fe3O4纳米颗粒, 得到了2种实验构型(构型1: 可见光入射角63°, 红外光入射角55°; 构型2: 可见光入射角45°, 红外光入射角55°)和3种偏振组合(ssp, ppp, sps)下的和频振动光谱, 比较了2种实验构型下和频光谱的特征, 通过偏振分析方法对各个光谱峰进行了归属.     

Non-invasive vibrational SFG spectroscopy reveals that bacterial adhesion can alter the conformation of grafted "brush" chains on SAM

Understanding bacterial adhesion on a surface is a crucial step to design new materials with improved properties or to control biofilm formation and eradication. Sum Frequency Generation (SFG) vibrational spectroscopy has been employed to study in situ the conformational response of a self-assembled monolayer (SAM) of octadecanethiol (ODT) on a gold film to the adhesion of hydrophilic and hydrophobic ovococcoid model bacteria. The present work highlights vibrational SFG spectroscopy as a powerful and unique non-invasive biophysical technique to probe and control bacteria interaction with ordered surfaces. Indeed, the SFG vibrational spectral changes reveal different ODT SAM conformations in air and upon exposure to aqueous solution or bacterial adhesion. Furthermore, this effect depends on the bacterial cell surface properties. The SFG spectral modeling demonstrates that hydrophobic bacteria flatten the ODT SAM alkyl chain terminal part, whereas the hydrophilic ones raise this ODT SAM terminal part. Microorganism-induced alteration of grafted chains can thus affect the desired interfacial functionality, a result that should be considered for the design of new reactive materials.     

Laser Linewidth and Spectral Resolution in Infrared Scanning Sum Frequency Generation Vibrational Spectroscopy System

Sum frequency generation vibrational spectroscopy (SFG-VS) is a robust technique for interfacial investigation at molecular level. The performance of SFG-VS mostly depends on the spectral resolution of the SFG system. In this research, a simplified function was deduced to calculate the spectral resolution of picosecond SFG system and the lineshape of SFG spectra based on the Guassian shaped functions of IR beam and visible beam. The function indicates that the lineshpe of SFG spectra from nonresonant samples can be calculated by the Guassian widths of both IR beam and visible beam. And the Voigt lineshape of SFG spectra from vibrational resonant samples can be calculated by the Homogeneous broadening (Lorentzian width) and Inhomogeneous broadening (Guassian width) of vibrational modes, as well as the Guassian widths of both IR beam and visible beam. Such functions were also applied to verify the spectral resolution of the polarization-resolved and frequency-resolved picosecond SFG-VS system which was developed by our group recently. It is shown that the linewidths of IR beams that generated from current laser system are about 1.5 cm^-1. The calculated spectral resolution of current picosecond IR scanning SFG-VS system is about 4.6 cm^-1, which is consist with he spctral resolution shown in the spectra of cholesterol monolayer (3.5-5 cm^-1).     

High-pressure ammonia adsorption and dissociation on clean fe(111) and oxygen-precovered fe(111) studied by sum frequency generation vibrational spectroscopy

The adsorption of gases N2, H2, O2, and NH3 that play a role in ammonia synthesis have been studied on the Fe(111) crystal surface by Sum Frequency Generation (SFG) vibrational spectroscopy using an integrated ultrahigh vacuum/high-pressure system. SFG spectra are presented for the dissociation intermediates, NH2 ( approximately 3325 cm-1) and NH ( approximately 3235 cm-1) under high pressure of ammonia (200 Torr) on the clean Fe(111) surface. Addition of 0.5 Torr of oxygen to 200 Torr of ammonia does not significantly change the bonding of dissociation intermediates to the surface. However, it leads to a phase change of nearly 180 degrees between the resonant and nonresonant second-order nonlinear susceptibility of the surface, demonstrated as a reversal of the SFG spectral features. Heating the surface in the presence of 200 Torr of ammonia and 0.5 Torr of oxygen reduces the oxygen coverage, which can be seen from the SFG spectra as another relative phase change of 180 degrees . The reduction of the oxide is also supported by Auger electron spectroscopy. The result suggests that the phase change of the spectral features could serve as a sensitive indicator of the chemical environment of the adsorbates. Clean Fe(111) is found to have a large SFG nonresonant signal. The magnitude of the nonresonant signal was dependent on the adsorption species; O2 and N2 decrease, while H2 and NH3 increase the SFG nonresonant signal. The change in nonresonant signal is correlated to the change in work function for Fe(111) upon adsorption. Adsorption-induced changes in the SFG nonresonant signal was used as an indicator of surface conditions and to monitor surface reactions.     

Conformational changes of fibrinogen after adsorption

The adsorption behavior of fibrinogen to two biomedical polyurethanes and a perfluorinated polymer has been investigated. Changes in the secondary structure of adsorbed fibrinogen were monitored using attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and sum frequency generation vibrational spectroscopy (SFG). SFG measurements were performed in the amide I range as well as in the C-H/N-H stretching range. Amide I signals from SFG demonstrate that fibrinogen has post-adsorption conformational changes that are dependent upon the polymer surface properties. For example, strong attenuation of the amide I and N-H stretching signals with increasing residence time was observed for fibrinogen adsorbed to poly(ether urethane) but not for the other two polymers. This change is not readily observed by ATR-FTIR. Differences in the observed spectral changes for fibrinogen adsorbed to each polymer are explained by different initial binding mechanisms and post-adsorption conformational changes.     

Vibrational sum-frequency-generation (SFG) spectroscopy study of the structural assembly of cellulose microfibrils in reaction woods

The cellulose microfibril assemblies in secondary cell walls of tension wood and compression wood were studied with vibrational sum frequency generation (SFG) spectroscopy. The tension wood contains the gelatinous layer with highly-crystalline and highly-aligned cellulose microfibrils. The SFG spectral features of tension wood changed depending on the azimuth angle between the polarization of the incident IR beam and the preferential alignment axis of the cellulose microfibrils. The SFG spectra of the compression wood did not show any dependence on the azimuth angle, implying that the overall orientation of cellulose microfibrils in compression wood is not highly aligned. Instead, the decrease of cellulose content in compression wood brought about larger separation between cellulose microfibrils, which was manifested as changes in CH₂/OH intensity ratio in SFG spectra. These results implied that SFG spectral features are sensitive to cellulose microfibril alignments and inter-fibrillar separations.     

Vibrational Sum‐Frequency Generation Activity of a 2,4‐Dinitrophenyl Phospholipid Hybrid Bilayer: Retrieving Orientational Parameters from a DFT Analysis of Experimental Data

The vibrational nonlinear activity of films of 2,4‐dinitrophenyl phospholipid (DNP) at the solid interface is measured by sum‐frequency generation spectroscopy (SFG). Hybrid bilayers are formed by a Langmuir–Schaefer approach in which the lipid layer is physisorbed on top of a self‐assembled monolayer of dodecanethiol on Pt with the polar heads pointing out from the surface. The SFG response is investigated in two vibrational frequency domains, namely, 3050–2750 and 1375–1240 cm^?1. The first region probes the CH stretching modes of DNP films, and the latter explores the vibrational nonlinear activity of the 2,4‐dinitroaniline moiety of the polar head of the lipid. Analysis of the CH stretching vibrations suggests substantial conformational order of the aliphatic chains with only a few gauche defects. To reliably assign the detected SFG signals to specific molecular vibrations, DFT calculations of the IR and Raman activities of molecular models are performed and compared to experimental solid‐state spectra. This allows unambiguous assignment of the observed SFG vibrations to molecular modes localized on the 2,4‐dinitroaniline moiety of the polar head of DNP. Then, SFG spectra of DNP in the 1375–1240 cm^?1 frequency range are simulated and compared with experimental ones, and thus the 1,4‐axis of the 2,4‐dinitrophenyl head is estimated to have tilt and rotation angles of 45±5° and 0±30°, respectively.     

Methane dissociative adsorption on the Pt(111) surface over the 300-500 K temperature and 1-10 Torr pressure ranges

The dissociative adsorption of methane on the Pt(111) surface has been investigated and characterized over the 1-10 Torr pressure and 300-500 K temperature ranges using sum frequency generation (SFG) vibrational spectroscopy and Auger electron spectroscopy (AES). At a reaction temperature of 300 K and a pressure of 1 Torr, C-H bond dissociation occurs in methane on the Pt(111) surface to produce adsorbed methyl (CH(3)) groups, carbon, and hydrogen. SFG results suggest that C-C coupling occurs at higher reaction temperatures and pressures. At 400 K, methyl groups react with adsorbed C to form ethylidyne (C(2)H(3)), which dehydrogenates at 500 K to form ethynyl (C(2)H) and methylidyne (CH) species, as shown by SFG. By 600 K, all of the ethylidyne has reacted to form the dissociation products ethynyl and methylidyne. Calculated C-H bond dissociation probabilities for methane, determined by carbon deposition measured by AES, are in the 10(-8) range and increase with increasing reaction temperature. A mechanism has been developed and is compared with conclusions from other experimental and theoretical studies using single crystals.     

Ordered adsorption of coagulation factor XII on negatively charged polymer surfaces probed by sum frequency generation vibrational spectroscopy

Electrostatic interactions between negatively charged polymer surfaces and factor XII (FXII), a blood coagulation factor, were investigated by sum frequency generation (SFG) vibrational spectroscopy, supplemented by several analytical techniques including attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), quartz crystal microbalance (QCM), ζ-potential measurement, and chromogenic assay. A series of sulfonated polystyrenes (sPS) with different sulfonation levels were synthesized as model surfaces with different surface charge densities. SFG spectra collected from FXII adsorbed onto PS and sPS surfaces with different surface charge densities showed remarkable differences in spectral features and especially in spectral intensity. Chromogenic assay experiments showed that highly charged sPS surfaces induced FXII autoactivation. ATR-FTIR and QCM results indicated that adsorption amounts on the PS and sPS surfaces were similar even though the surface charge densities were different. No significant conformational change was observed from FXII adsorbed onto surfaces studied. Using theoretical calculations, the possible contribution from the third-order nonlinear optical effect induced by the surface electric field was evaluated, and it was found to be unable to yield the SFG signal enhancement observed. Therefore it was concluded that the adsorbed FXII orientation and ordering were the main reasons for the remarkable SFG amide I signal increase on sPS surfaces. These investigations indicate that negatively charged surfaces facilitate or induce FXII autoactivation on the molecular level by imposing specific orientation and ordering on the adsorbed protein molecules. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

和频振动光谱研究多晶金电极/溶液界面乙腈分子取向的flip-flop行为

用和频振动光谱研究乙腈/金电极界面,观测到乙腈的甲基振动峰强度随施加的电极电势而变化.当电极电势越过零电荷电势（pzc）时,甲基振动峰符号发生反转,这意味着基团取向发生反转（flip-flop）.由此推断出乙腈分子在金电极界面的吸附构型.即在零电荷电势下,电极界面吸附的乙腈分子构型为甲基靠近电极表面而腈基远离电极表面;而高于零电荷电势则电极界面吸附的乙腈分子构型发生反转,变为腈基靠近电极表面而甲基远离电极表面的构型.     

Surface plasma treatment effects on the molecular structure at polyimide/air and buried polyimide/epoxy interfaces

Polyimides are widely used as chip passivation layers and organic substrates in microelectronic packaging. Plasma treatment has been used to enhance the interfacial properties of polyimides, but its molecularmechanism is not clear. In this research, the effects of polyimide surface plasma treatment on the molecular structures at corresponding polyimide/air and buried polyimide/epoxy interfaces were investigated in situ using sum frequency generation (SFG) vibrational spectroscopy. SFG results show that the polyimide backbone molecular structure was different at polyimide/air and polyimide/epoxy interfaces before and after plasma treatment. The different molecular structures at each interface indicate that structural reordering of the polyimide backbone occurred as a result of plasma treatment and contact with the epoxy adhesive. Furthermore, quantitative orientation analysis indicated that plasma treatment of polyimide surfaces altered the twist angle of the polyimide backbone at corresponding buried polyimide/epoxy interfaces. These SFG results indicate that plasma treatment of polymer surfaces can alter the molecular structure at corresponding polymer/air and buried polymer interfaces.     

Specific binding of a biotinylated,metallocarbonyl‐labelled dendrimer to immobilized avidin detected by diffuse‐reflectance infrared Fourier transform spectroscopy

Molecular recognition between avidin covalently immobilized at the surface of acrylic resin beads and a transition metallocarbonyl tracer of the biotin ligand was detected using diffuse reflectance infrared Fourier transform spectroscopy. Copyright © 2004 John Wiley & Sons, Ltd.     

Sum Frequency Generation Vibrational Spectra of Perovskite Nanocrystals at the Single-Nanocrystal and Ensemble Levels

Determination of molecular structures of organic-inorganic hybrid perovskite (OIHP) nanocrystals at the single-nanocrystal and ensemble levels is essential to understanding the mechanisms responsible for their size-dependent optoelectronic properties and the nanocrystal assembling process, but its detection is still a bit challenging. In this study, we demonstrate that femtosecond sum frequency generation (SFG) vibrational spectroscopy can provide a highly sensitive tool for probing the molecular structures of nanocrystals with a size comparable to the Bohr diameter (~10 nm) at the single-nanocrystal level. The SFG signals are monitored using the spectral features of the phenyl group in (R-MBA)PbBr₃ and (R-MBA)₂PbI₄ nanocrystals (MBA: methyl-benzyl-ammonium). It is found that the SFG spectra exhibit a strong resonant peak at 3067±3 cm^-1 (ν₂ mode) and a weak shoulder peak at 3045±4 cm^-1 (ν_7a mode) at the ensemble level, whereas a peak of the ν₂ mode and a peak at 3025±3 cm^-1 (ν_20b mode) at the single-nanocrystal level. The nanocrystals at the single-nanocrystal level tend to lie down on the surface, but stand up as the ensemble number and the averaged sizes increase. This finding may provide valuable information on the structural origins for size-dependent photo-physical properties and photoluminescence blinking dynamics in nanocrystals.     

Molecular recognition of avidin on biotin-functionalized gold surfaces detected by FT-IRRAS and use of metal carbonyl probes

Fourier transform infrared reflection-absorption spectroscopy (FT-IRRAS) was successively used to monitor the covalent immobilization of biotin molecules onto a planar gold substrate covered with a self-assembled monolayer of cystamine and to transduce the molecular recognition of avidin and biotin. This detection was greatly facilitated and made selective by the labeling of avidin and of biotin with various transition metal carbonyl probes. The binding of avidin to the surface was optimized by blocking the nonspecific binding sites by adsorption of an unrelated protein, bovine serum albumin. This work exemplifies the feasibility of detecting biomolecular associations involving molecules of any size at a liquid/solid interface by using a simple and accessible surface analysis technique.     

Surface‐Charge Differentiation of Streptavidin and Avidin by Atomic Force Microscopy–Force Spectroscopy

Chemical information can be obtained by using atomic force microscopy (AFM) and force spectroscopy (FS) with atomic or molecular resolution, even in liquid media. The aim of this paper is to demonstrate that single molecules of avidin and streptavidin anchored to a biotinylated bilayer can be differentiated by using AFM, even though AFM topographical images of the two proteins are remarkably alike. At physiological pH, the basic glycoprotein avidin is positively charged, whereas streptavidin is a neutral protein. This charge difference can be determined with AFM, which can probe electrostatic double‐layer forces by using FS. The force curves, owing to the electrostatic interaction, show major differences when measured on top of each protein as well as on the lipid substrate. FS data show that the two proteins are negatively charged. Nevertheless, avidin and streptavidin can be clearly distinguished, thus demonstrating the sensitivity of AFM to detect small changes in the charge state of macromolecules.     

Preparation of Surface-enhanced Raman Scattering(SERS)-active Optical Fiber Sensor by Laser-induced Ag Deposition and Its Application in Bioidentification of Biotin/Avidin

A surface-enhanced Raman scattering(SERS) optical fiber sensor was prepared by the laser-induced deposition of Ag nanoparticle membrane on a silica optical fiber tip, which was applied to the real time SERS spectral monitoring on the biorecognition of biotin/avidin. The bioidentification of biotin/avidin was carried out through a indirect method, in which the bioidentification is based on the SERS response signal of a labeled dye(Atto610) after its fluorescence has been quenched totally by the deposited Ag nanoparticle membrane. By SERS monitoring the bioidentification process of biotin/avidin, it has been found that this recognition process is finished in 40 min. The lowest detection concentration of biotin is 1.0×10^-7 mg/mL. This research is promising in the application of immunoassays on line and in vivo.     

Unique Vibrational Features as a Direct Probe of Specific Antigen–Antibody Recognition at the Surface of a Solid‐Supported Hybrid Lipid Bilayer

Here, we demonstrate how sum frequency generation (SFG), a vibrational spectroscopy based on a nonlinear three‐photon mixing process, may provide a direct and unique fingerprint of bio‐recognition; This latter can be detected with an intrinsically discriminating unspecific adsorption, thanks to the high sensitivity of the second‐order nonlinear optical (NLO) response to preferential molecular orientation and symmetry properties. As a proof of concept, we have detected the biological event at the solid/liquid interface of a model bio‐active antigen platform, based on a solid‐supported hybrid lipid bilayer (ss‐HLB) of a 2,4‐dinitrophenyl (DNP) lipid, towards a monoclonal mouse anti‐DNP complementary antibody.     

FT-IRRAS spectroscopic studies of the interaction of avidin with biotinylated dendrimer surfaces

The interaction of avidin with biotin on a functional Au surface containing fourth generation amine-terminated polyamidoamine (G4-NH₂ PAMAM) dendrimers was investigated through the use of Fourier transform infrared reflection–adsorption spectroscopy (FT-IRRAS). The first step in the fabrication of the functional surfaces used was the construction of an aldehyde-terminated self-assembled monolayer (SAM) through the treatment of Au-coated glass slides with ethanol solutions of self-synthesized 2-hydroxypentamethylene sulfide (HPMS). The as-formed aldehyde-terminated monolayer was subsequently immersed in methanol solutions of G4-NH₂ PAMAM dendrimer to obtain well-organized primary amine-terminated surfaces. Biotinylation of the amine-terminated layers thus obtained was accomplished by use of the N-succinimidyl ester of biotin. Each step of the synthetic process, as well as the performance of final surface for protein recognition was monitored by FT-IRRAS. In particular, the molecular recognition ability was examined and quantified by use of an alkyne dicobalt hexacarbonyl probe coupled with avidin. Non-specific adsorption of avidin was determined by exposure of the amine-terminated and/or biotinylated surfaces to solutions of biotin-saturated avidin. The results indicate that the biotinylated G4-NH₂ PAMAM dendrimer layers formed according to this procedure have a high capacity for binding avidin with relatively high specificity. The performance of these layers (i.e. both binding capacity and specificity) improve substantially when 6-mercapto-1-hexanol (MH) is present as a co-adsorbent during the formation of the initial aldehyde-terminated layers. This effect can be attributed to the dilution of the initial aldehyde-terminated SAM, leading to a more favorable spatial arrangement of the subsequent biotinylated surfaces.