KINETICS OF FORMATION AND STABILITY CONSTANTS OF MONO AND BIS l-TYROSINE COMPLEXES OF Cu(II), Co(II), AND Ni(II)

Abstract

The kinetics and stability constants of l-tyrosine complexation with copper(II), cobalt(II) and nickel(II) have been studied in aqueous solution at 25° and ionic strength 0.1 M. The reactions are of the type M(HL)^(3-n)+ _n-1 + HL- ? M(HL)^(2-n)+_n(k_n, forward rate constant; k_-n, reverse rate constant); where M=Cu, Co or Ni, HL^? refers to the anionic form of the ligand in which the hydroxyl group is protonated, and n=1 or 2. The stability constants (K_n=k_n/k_-n) of the mono and bis complexes of Cu²⁺, Co²⁺ and Ni²⁺ with l-tyrosine, determined by potentiometric pH titration are: Cu²⁺, log K₁=7.90 ± 0.02, log K₂=7.27 ± 0.03; Co²⁺, log K₁=4.05 ± 0.02, log K₂=3.78 ± 0.04; Ni²⁺, log K₁=5.14 ± 0.02, log K₂=4.41 ± 0.01. Kinetic measurements were made using the temperature-jump relaxation technique. The rate constants are: Cu²⁺, k₁=(1.1 ± 0.1) × 10⁹ M ^?1 sec^?1, k_-1=(14 ± 3) sec^?1, k₂=(3.1 ± 0.6) × 10⁸ M ^?1 sec^?1, k^?2=(16 ± 4) sec^?1; Co²⁺, k₁=(1.3 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-1=(1.1 ± 0.2) × 10² sec^?1, k₂=(1.5 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-2=(2.5 ± 0.6) × 10² sec^?1; Ni²⁺, k₁=(1.4 ± 0.2) × 10⁴ M ^?1 sec^?1, k_-1=(0.10 ± 0.02) sec^?1, k₂=(2.4 ± 0.3) × 10⁴ M ^?1 sec^?1, k_-2=(0.94 ± 0.17) sec^?1. It is concluded that l-tyrosine substitution reactions are normal. The presence of the phenyl hydroxyl group in l-tyrosine has no primary detectable influence on the forward rate constant, while its influence on the reverse rate constant is partially attributed to substituent effects on the basicity of the amine terminus.     

On the Oxidation of Octamethylenetetrathiafulvalene by CuBr2 – Synthesis,Crystal Structure and Magnetic Properties of (OMTTF)2[Cu4Br10]

The reaction of octamethylenetetrathiafulvalene (OMTTF) with excess CuBr₂ in tetrahydrofurane/acetonitrile yields black (OMTTF)₂[Cu₄Br₁₀] ( 1 ). The crystal structure determination shows the presence of OMTTF cations and tetranuclear bromidocuprate anions. The novel anion consists of four edge and corner sharing CuBr₄ tetrahedra, which are connected to a ring. The assignment of the ionic charges and oxidation states for the copper atoms is supported by the magnetic properties. 1 is antiferromagnetic with T_N ≈ 30 K. The magnetic moment reaches 2.54 B.M., which indicates, together with the Curie–Weiss constant of –35 K, a coupling of the paramagnetic spins over the whole temperature region. The ionic charges of the salt‐like compound 1 are therefore (OMTTF²⁺)₂[(Cu⁺)₂(Cu²⁺)₂Br₁₀]^4–. The antiferromagnetism is explained by the coupling of the spins of two Cu²⁺ ions in the anion with an exchange constant of J = –18 cm^–1. The Cu^I and Cu^II atoms are clearly distinguishable in the mixed valent anion. The OMTTF cation is not planar but exhibits an interplanar angle between the two central C₃S₂ ring moieties of 15.3°, which is in accordance to the dicationic oxidation state.     

On the hydrolysis of the titanium(IV) ion in chloride media

Determinations of the [Ti(IV)]/[Ti(III) ratio in solutions of titanium(IV) chloride equilibrated with H₂(g), at 25°C in 3 M (Na)Cl ionic medium, have indicated the predominance of the Ti(OH)₂²⁺ species in the concentration ranges 0.5 ? [H⁺] ? 2 M and 1.5 x 10^?3 ? [Ti(IV)] ? 0.05 M. From the equilibrium data the reduction potential has been evaluated Ti(OH)₂²⁺ + 2 H⁺ + e ? Ti³⁺ + 2H₂O, E_oH = (7.7 ± 0.6) x 10^?3 V. The acidification reactions of Ti(OH)₂²⁺ were also studied in 12 M(Li)Cl medium at 25°C by measuring the redox potential of the Ti(IV)/Ti(III) couple as a function of [H⁺]. The potentiometric data in the acidity range 0.3 ? [H⁺] ? 12 M have been explained by assuming Ti⁴⁺ + e ? Ti³⁺, E_o = 0.202 ± 0.002 V Ti⁴⁺ + H₂O ? TiOH³⁺ + H⁺, log K_a1 = 0.3 ± 0.01 Ti⁴⁺ + 2H₂O ? Ti(OH)₂²⁺ + 2H⁺, log K_a1K_a2 = 1.38 ± 0.05.     

Medium effects on HSO 4 − formation in a mixture of isomolar solutions of hydrochloric acid and an alkali metal chloride

The strontium sulfate solubility has been studied in mixtures of isomolar MCl and HCl solutions (M = Li, Na, K, Cs) with ionic strengths of I = 0.5, 1.0, 2.0, 3.0, and 4.0 at 25°C. At I ≥ 2, the SrSO₄ solubility as a function of hydrogen ion concentration passes through a maximum in all systems but (Li,H)Cl. The position of this maximum depends only slightly on the nature and ionic strength of the medium. The presence of the maximum is unambiguous evidence that there are secondary effects of the medium associated with the substitution of H⁺ for M⁺. These effects oppose the ordinary shift of the HSO ₄ ^? formation equilibria. A method is suggested for separating these effects. The standard values of pSP⁰ and logβ⁰, determined by extrapolation to zero ionic strength, are in satisfactory agreement with the literature. The parameter α₁, which characterizes the secondary effects of the medium on one of the basic equilibrium constants (log K _S1 ^O ), increases in the order (Li,H)Cl < (Na,H)Cl < (K,H)Cl < (Cs,H)Cl.     

The heat of mixing electrolytes: The cross-square rule in the solvent N-methylacetamide

The six possible heats of mixing of the system Na⁺, Pr₄N⁺?Br^?, I^? have been measured at 35°C in the solvent N-methylacetamide at an ionic strength of 0.5. The cross-square rule of T. F. Young^(1,2) does not hold accurately, and there are strong attractive forces between a cation and an anion. The largest effect in the heats of mixing is the formation of tetra-n-propylammonium iodide interactions. The data is compared to that of the Na⁺,K⁺?Cl^?,NO ₃ ^? system in water.     

Stability constants for aqueous silver/bromide/thiocyanate complexes

Stability constants for aqueous Ag⁺/Br^?, Ag⁺/SCN^?, and mixed Ag⁺/Br^?/SCN^? complexes are determined at 25° C by using data generated potentiometrically in solutions having ionic strengths of 0.4, 1.0, and 2.0 m. Monte Carlo numerical methods which yield apparent stability constants for these complexes as well as confidence limits are described in detail. Explicit consideration of speciation shows that under useful precipitation conditions (high bromide and low thiocyanate), a significant fraction of soluble silver is present as AgBr_n (SCN)^1?n?m_m complexes. The most prevalent mixed complexes under these conditions are AgBr (SCN)^? (log β₁₁=8.0 ± 0.5) and AgBr₂(SCN)^2? (log β₂₁=9.2 ± 0.3). The free energies of formation of the other tri- and tetra-coordinate mixed complexes are nearly indistinguishable (log β₁₂=9.3 ± 0.5; log β₃₁=9.0 ± 0.6; log β₂₂=9.6 ± 0.9; log β₁₃=10.3 ±0.5).     

Complexation of silver(I) with benzylpenicilline and oxacilline

The complexation of Ag⁺ ions with anions of β-lactam antibiotics, such as benzylpenicilline (Bzp^?) and oxacilline (Oxa^?), in aqueous solution at 25°C and an ionic strength of 0.1 (KNO₃) was studied potentiometrically using a silver indicator electrode. The formation constants of the complexes AgBzp (logβ = 2.21 ± 0.01), AgBzp ₂ ^? (logβ = 3.91 ± 0.02), Ag₂Oxa⁺ (logβ = 4.89 ± 0.01), AgOxa (logβ = 2.88 ± 0.01), (logβ = 5.43 ± 0.01) were determined.     

Kinetic study of the reaction of meso-tetrakis (p-trimethylammoniumphenyl)porphinatodiaquorhodate(II) with chloride,bromide, iodide,hexacyanocobaltate(III) and thiocyanate ions in aqueous solution

The reaction of Cl^?, Br^?, I^?, Co(CN)₆^3? and NCS^? with meso-tetrakis (p-trimethylammoniumphenyl)porphinatodiaquorhodate(III), [RhTAPP(H₂O)₂]⁵⁺, has been studied at 15, 25 and 35°C in 0.1 M [H⁺] with μ = 1.00 M (NaNO₃). The value of the acidity constant, K_al, at 25°C is 4.39 × 10^?9 M. The reactions are first order in anion concentration up to 0.9 M. The values of the stability constants, K₁, and the second order rate constants, k₁, for the reaction with Cl^?, Br^?, I^?, Co(CN)₆^3? and NCS^? are respectively 0.23 M^?1 and 2.5 × 10^?3 M^?1 s^?1, 1.1 M^?1 and 6.92 × 10^?3 M^?1 s^?1, 40.0 M^?1 and 17.0 × 10^?3 M^?1 s^?1, 550 M^?1 and 20.0 × 10^?3 M^?1 s^?1, 3400 M^?1 and 20.9 × 10^?3 M^?1 s^?1. The porphine greatly labilizes the Rh(III). There has been about a 500-fold increase in the rate constant for substitution compared to that of [Rh(NH₃)₅H₂O]³⁺. The substitution rates are however about the same as for [Rh(TPPS)(H₂O)₂]^3?, indicating that the overall charge on the complex plays only a minor role. The kinetic results indicate that dissociative activation is occurring in these reactions.     

Complex Formation of PdII Ion with the Tripodal Ligand Tris[2-(dimethylamino)ethyl]amine

The complex formation of Pd^II with tris[2-(dimethylamino)ethyl]amine (N(CH₂CH₂N(CH₃)₂)₃, Me₆tren) was investigated at 25° and ionic strength I = 1, using UV/VIS, potentiometric, and NMR measurements. Chloride, bromide, and thiocyanate were used as auxiliary ligands. The stability constant of [Pd(Me₆tren)]²⁺ in various ionic media was obtained: log β([Pd(Me₆tren)] = 30.5 (I = 1(NaCl)) and 30.8 (I = 1(NaBr)), as well as the formation constants of the mixed complexes [Pd(HMe₆tren)X]²⁺ from [Pd(HMe₆tren)(H₂O)]³⁺:log K = 3.50 = Cl^?) and 3.64 (X^? = Br^?) and [Pd(Me₆tren)X]⁺ from [Pd(Me₆tren)(H₂O)]²⁺: log K = 2.6 (X^? = Cl^?), 2.8(Br^?) and 5.57 (SCN^?) at I = 1 (NaClO₃). The above data, as well as the NMR measurements do not provide any evidence for the penta-coordination of Pd^II, proposed in some papers.     

A re-examination of the decay kinetics of pulse radiolytically generated Br-2 radicals in aqueous solution

The decay of Br^-₂ in Ar-purged or N₂O-saturated aqueous solutions of KBr (0.01-1.0 M) in the pH range 1–7 has been re-examined using the techniques of pulse radiolysis and computer simulation. The dependence of the rate constant for the intrinsic decay of Br^-₂ on ionic strength (controlled by KBr) has been established; the values of k (Br^-₂ + Br^-₂) are (1.9 ± 0.1) × 10⁹, (2.2 ± 0.3) × 10⁹ and (2.4 ± 0.3) × 10⁹ M^-1 s^-1 in the presence of 0.01, 0.1 and 1.0 M KBr, respectively, independent of pH between 2 and 7. The computer simulation of the decay of Br^-₂ has also generated, for the latter species, ϵ = 10,000 ± 700 M^-1 cm^-1 at λ_max = 360 nm; this value has been calculated without making any assumption concerning G(Br^-₂). For the reduction of Br^-₂ by H atoms, a value of k (H + Br^-₂) = (1.4 ± 0.3) × 10¹⁰ M^-1 s^-1 has been obtained in the presence of 0.01-1.0 M KBr, independent of pH between 1–4. For the reduction of Br^-₂ by e^-_aq at pH 7 (10^-3 M phosphates) and μ = 0.1, a value of k (Br^-₂ + e^-_aq = (1.1 ± 0.2) × 10¹⁰ M^-1 s^-1 has been obtained.     

A new semiempirical kinetic method for the determination of ion exchange constants for counterions of cationic micelles: Study of the rate of pH‐independent hydrolysis of phthalimide as the kinetic probe

Pseudo‐first‐order rate constants (k_obs) for pH‐independent hydrolysis of phthalimide ( 1 ), obtained at a constant total concentration of cetyltrimethylammonium bromide and hydroxide ([CTABr]_T), 2.0 × 10^?4 M 1 , 0.02 M MOH (M⁺ = Li⁺, Na⁺ and K⁺) and various concentrations of inert salt MX (= LiCl, LiBr, NaCl, NaBr, KCl and KBr), follow a relationship derived from the pseudophase micellar (PM) model coupled with an empirical equation. This relationship gives empirical constants, F_X/S and K_{X /S}, with S representing anionic 1 . The magnitude of F_X/S is the measure of the fraction of micellized anionic 1 (S^?_M) transferred to the aqueous phase by the limiting concentration of X^?. The value of K_X/S is the measure of the ability of the counterions (X^?) to expel the reactive counterions (S^?) from the cationic micellar surface to the aqueous phase. The values of F_{X/ S} are ～ 1 for MBr (M⁺ = Li⁺, Na⁺ and K⁺) and in the range ? 0.7 to ? 0.5 for MCl (M⁺ = Na⁺ and K⁺) at 0.006, 0.010 and 0.016 M CTABr. For LiCl, the values of F_X/S become ～1 at 0.006 and 0.010 M CTABr and 0.8 at 0.016 M CTABr. The values of the empirical constants, F_X/S and K_X/S, have been used to determine the usual ion exchange constant (K^Cl_Br). The mean values of K^Cl_Br are 3.9 ± 0.5, 2.7 ± 0.1, and 2.6 ± 0.3 for LiX, NaX, and KX, respectively. These values of K^Cl_Br are comparable with those obtained directly by other physicochemical techniques. Thus, this new method for the determination of ion exchange constants for various counterions of cationic micelles may be considered as a reliable one. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 43: 9–20, 2011     

L'extraction des lanthanides et des actinides par les oxydes d'alkylphosphine : L'extraction del'acide nitrique par quelques dioxydes de diphosphine

The distribution of nitric acid between an aqueous phase of constant or variable ionic strength and a benzene solution of diphosphine dioxide can be explained by the following reactions H⁺_a+ NO_3^-a+ DiPO₀ ? D1PO·HNO₃₀ H⁺_a+ NO_3^-a+ DiPO·HNO₃₀ ? DiPO·2 HNO₃₀ At constant ionic strength, the stability constants K₁″ were determined for the complexes 1,1-DiPO·HNO₃ (98 ± 01 (M)^-1), 1,4-DiPO·HNO₃(44±3 (M)_-1) and 1,5-DiPO·HNO₃ (51 ± 1 (M)^-1). The constants K₁₁″ for the complexes 1,1-DiPO·2 HNO₃ and 1,5-DiPO.2 HNO₃ are respectively 035±001 (M)^-1 and 62 ±0.05 (M)^-1 at 25°. With an aqueous phase of variable ionic strength, values of K₁'=54±7 (M)^-2 for 1,5-D1PO.HNO₃ and K_II'=65 ± 04 (M)^-2 for 1,5-DiPO·2 HN0₃ were obtained     

Oxoacidobasic properties of water in the molten LiCl−KCl eutectic

The quantitative study of the oxoacidobasic properties of water, in the LiCl?KCl eutectic, was carried out by means of a galvanic cell consisting of a pO^2? indicator electrode (made of a calcia-stabilized zirconia tube filled with a Ni+NiO mixture and an Ag/AgCl reference electrode). The equilibrium constants of the following reactions:2OH^? agO^2?+H₂O (K₁)H₂O+2Cl^? agO^2?+2HCl (K₂) have been determined in the temperature range 642–742°C and are given by:log K₁=7.86?7.68×10³/Tlog K₂=2.29?10.03×10³/T where T is the thermodynamic temperature, K₁ and K₂ being expressed in the atm and molar fraction scale.     

Electrode processes of Cr(II) in non-complexing and complexing media

The formal potentials and the kinetics parameters for the electrode process: Cr²⁺+2 e⁻ = Cr^o occurring at a mercury electrode in solutions of NaClO₄, NaCI, NaBr, and NaSCN, were determined from the analysis of irreversible anodic and cathodic chronocoulometric waves. The interaction of Cr(II) with Cl⁻ was found to be negligible (equilibrium constant K <1) whereas the interaction with Br⁻ and SCN⁻ was weak (K₁(Br⁻)=1 M⁻¹ and β₂(SCN⁻) = 25 M⁻²). The results of the analysis of the formal rate constant of this and other amalgam forming reactions suggested that the formation of amalgam was the most important step in the whole process.     

Kinetic Study of the Bromine-Catalyzed Isomerization of Maleic Acid in Aqueous Ce(IV)-Br−-H2SO4 Medium

The presence of ceric and bromide ions catalyzes the isomerization of maleic acid (MA) to fumaric acid (FA) in aqueous sulfuric acid. A kinetic study of this bromine-catalyzed reaction was carried out. The reaction between ceric ion and maleic acid is first order with respect to Ce(IV). For [Ce(IV)]₀=5.0×10^?4 M, [H₂SO₄]₀=1.2 M, μ=2.0 M (adjusted by NaClO₄), and [MA]₀=(0.5–1.0)M, the observed pseudo-first-order rate constant (k₀₃) at 25° is k₀₃=7.622×10^?5 [MA]₀/(1+0.205[MA]₀). The reaction between ceric and bromide ions is first order with respect to Ce(IV). For [Ce(IV)]₀=5.0×10^?4 M, [H₂SO₄]₀=1.2 M, μ=2.0 M, and [Br^?]₀=(0.025–0.150)M, the pseudo-first-order rate constant (k₀₂) at 25° is k₀₂= (4.313±0.095)x10^?2[Br^?]²+(2.060±0.119)x10^?3[Br^?]. The reaction of Ce(IV) with maleic acid and bromide ion is also first order with respect to Ce(IV). For [Ce(IV)]₀=5.0×10^?4 M, [MA]₀=0.75 M, [H₂SO₄]₀=1.2 M, μ=2.0 M, and [Br^?]₀= (0.025–0.150)M, the pseudo-first-order rate constant (k₀₃) at 25° is k₀₃= (5.286±0.045)x10^?2[Br^?]²+(3.568±0.056)x10^?3[Br^?]. For [Ce(IV)]₀=5.0 × 10^?4 M, [Br^?]₀=0.050 M, [H₂SO₄]₀=1.2 M, μ=2.0 M, and [MA]₀=(0.15–1.0)M at 25°, k₀₃=(2.108×10^?4+2.127×10^?4[MA]₀)/(1+0.205[MA]₀). A mechanism is proposed to rationalize the results. The effect of temperature on the reaction rate was also studied. The energy barrier of Ce(IV)—Br^? reaction is much less than that of Ce(IV)—MA reaction. Maleic and fumaric acids have very different mass spectra. The mass spectrum of fumaric acid exhibits a strong metastable peak at m/e 66.5.     

Yttrium and Rare Earth Element Complexation by Chloride Ions at 25°C

Formation constants for yttrium and rare earth element (YREE) chloride complexation have been measured at 25°C by examining the influence of medium (NaClO₄ and NaCl) on YREE complexation by fluoride ions and methyliminodiacetate (MIDA). YREE chloride complexation constants _Clβ₁(M) obtained in this work using dissimilar procedures are in good agreement and indicate that, at constant temperature and ionic strength, _Clβ₁(M) does not vary significantly across the fifteen-member series of elements. The ionic strength μ dependence of YREE chloride formation constants between 0 and 6 molar ionic strength can be written, for all YREE, as ${\text{log}}_{{\text{CI}}} \beta _1 \left( M \right) = \log _{{\text{CI}}} \beta _1^0 \left( M \right) - 3.066\mu ^{0.5} /\left( {1 + 1.727\mu ^{0.5} } \right)$ where _Clβ₁(M) = [MCl²⁺][M³⁺]^?1[Cl^?1]^?1 and log_Clβ₁ ^o(M) represents the MCl²⁺ formation constant for all YREE at zero ionic strength: log_Clβ₁ ^o = 0.65 ± 0.05.     

Solvated positron chemistry. II. The reaction of hydrated positrons with Cl−, Br− and I− ions

The reaction of the hydrated positron, e_aq⁺ with Cl^?, Br^?, and I^? ions in aqueous solutions was studied by means of positron The measured angular correlation curves for [Cl^?, e⁺], [Br^?, e⁺, and [I^?, e⁺] bound states were in good agreement with th Because of this agreement and the fact that the calculated positron wavefunctions penetrate far outside the X^? ions in the [X^?, e⁺] sta propose that a bubble is formed around the [X^?, e⁺] state, similar to the Ps bubble found in nearly all liquids. F^?ions did not react w Preliminary results showed that CN^? ions react with e_aq⁺ while OH^?ions are non reactive. The rate constants were 3.9 × 10¹⁰ M^?1 s^?1, 4.4 × 10¹⁰ M^?1 s^?1, and 6.3 × 10¹⁰ M^?1 s^?1 for Cl^?, Br^?, and I^?, respectively, at low (? 0.03 M) X^? concentrations. A 25% decrease in the rate constant caused by the addition of 1 M ethanol to the I^? solutions was i The influence of halide ions on the positronium (Ps) yields in pure water was studied by use of lifetime measurements. The Cl^?, Br^?, and I^? ions reduced the Ps yields at low concentrations (? 0.03 M), while F^? ions only reduced the Ps-yield However, the Ps yields saturated (e.g. at ≈ 21% ortho-Ps yield in the Cl^? case) at higher concentrations. This saturation and the high-concentration effects-in the angular correlation results were interpreted as caused by rather complicated spur effects, wh It is proposed that spur electrons may pick off the positron from the [X^?, e⁺ states with an efficiency which depends on the structure of the     

Kinetics and mechanism of the Cu(I)/Cu(Hg) electrode reactions in DMSO solutions of halide ions

The electrode reaction Cu(I)/Cu(Hg) in complex chloride, bromide and iodide solutions with DMSO as solvent has been studied at the equilibrium potential by the faradiac impedance method and a cyclic current-step method. The kinetic data refer to the ionic strength 1 M with ammonium perchlorate as supporting electrolyte and to the temperature 25°C. Double-layer data have been obtained from electrocapillary measurements. From the results for the chloride system at [Cl^?]>15 mM it is concluded that the charge transfer is catalysed by ligand bridging at the amalgam and the following parallel reactions predominate: Cl_ads^?-Cu⁺+e^?(am)Cl_ads^?+Cu(am) Cl_ads^?-Cu₂Cl_j^2?j+e^?(am)Cl_ads^?+Cu(am)+CuCl_j^1?j At lower [Cl^?] and in the whole ligand concentration range available in the bromide and iodide systems the impedance measurements indicate a rate-controlling adsorption step. It is suggested that uncharged complex CuL (L^?=halide ion) then forms an adsorbed two-dimensional network on the amalgam surface.     

Flexibility of Na,K-ATPase secondary structure upon drug-protein interaction

The enzyme Na⁺, K⁺-ATPase is an integral membrane protein which transports sodium and potassium cations against an electrochemical gradient. The transport of Na⁺ and K⁺ ions is connected to an oscillation of the enzyme between the two conformational states, the E₁ (Na⁺) and the E₂ (K⁺) conformations. The enzymatic activity of ATPase is largley affected by different ligands complexation. This review reports the effects of several drugs such as AZT (anti-AIDS), cis-Pt (antitumor), aspirin (anti-inflammatory) and vitamin C (antioxidant) on the stability and secondary structure of Na,K-ATPase in vitro. Drug-enzyme binding is mainly through H-bonding to the polypeptide C=O and C-N groups with two binding constants K_1(AZT) = 5.30 × 10⁵ M^?1 and K_2(AZT) = 9.80 × 10³ M^?1 for AZT and one binding constant for K_cis-Pt = 1.93 × 10⁴ M^?1, K_aspirin = 6.45 × 10³ M^?1 and K_ascorbate = 1.04 × 10⁴ M^?1 for cis-Pt, aspirin and ascorbic acid. The enzyme secondary structure was altered from that of α-helix 19.8% (free protein) to almost 22–26% and the β-sheet from 25.6% to 18–22%, upon drug complexation with the order of induced stability AZT > cis-Pt > ascorbate > aspirin.     

Formation and Stability of Binary Complexes of Divalent Ecotoxic Ions (Ni, Cu, Zn, Cd, Pb) with Biodegradable Aminopolycarboxylate Chelants (dl-2-(2-Carboxymethyl)Nitrilotriacetic Acid, GLDA, and 3-Hydroxy-2,2′-Iminodisuccinic Acid, HIDS) in Aqueous Solutions

The protonation and complex formation equilibria of two biodegradable aminopolycarboxylate chelants {dl-2-(2-carboxymethyl)nitrilotriacetic acid (GLDA) and 3-hydroxy-2,2??-iminodisuccinic acid (HIDS)} with Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ ions were investigated using the potentiometric method at a constant ionic strength of I?=?0.10?mol·dm^?3 (KCl) in aqueous solutions at 25?±?0.1?°C. The stability constants of the proton?Cchelant and metal?Cchelant species for each metal ion were determined, and the concentration distributions of various complex species in solution were evaluated for each ion. The stability constants (log₁₀ K _ML) of the complexes containing Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ ions followed the identical order of log₁₀ K _CuL?>?log₁₀ K _NiL?>?log₁₀ K _PbL?>?log₁₀ K _ZnL?>?log₁₀ K _CdL for either GLDA (13.03?>?12.74?>?11.60?>?11.52?>?10.31) or HIDS (12.63?>?11.30?>?10.21?>?9.76?>?7.58). In each case, the constants obtained for metal?CGLDA complexes were larger than the corresponding constants for metal?CHIDS complexes. The conditional stability constants (log₁₀ $ K_{\text{ML}}^{'} $ ) of the metal?Cchelant complexes containing GLDA and HIDS were calculated in terms of pH, and compared with the stability constants for EDTA and other biodegradable chelants.