Acetyl-containing phosphine oxides as extractants for actinides and lanthanides

Extraction capability and selectivity of acetyl-containing phosphine oxides R₂P(O)CMe₂CH₂C(O)Me (R = Pr, Bu, n-C₅H₁₁, n-C₆H₁₃, n-C₈H₁₇, Ph) toward actinides (U^VI, Th^IV) and trivalent lanthanides (La^III, Nd^III, Ho^III, Yb^III) were studied. The new ligands were shown to be more efficient and selective in the extraction of uranium, thorium, and heavy lanthanides from nitric acid solutions into chloroform as compared to the known extractants such as carbamoylphosphine oxide Ph₂P(O)CH₂C(O)NBu₂, trioctylphosphine oxide (n-C₈H₁₇)₃P(O), and tributyl phosphate (n-BuO)₃P(O).     

Thermodynamic study of the n-octane-1-pentanol-sodium dodecyl sulfate solutions in water

The thermodynamic properties, PVTx (T_S, P_S, ρ_S), (∂P/∂T)_VX, and C_VVTx, of three microemulsions (water + n-octane + sodium dodecylsulfate + 1-pentanol) with composition of solution-1: 0.0777 (H₂O):0.6997 (n-C₈H₁₈):0.0777 (SDS):0.1449 (1-C₅H₁₁OH) mass fraction; solution-2: 0.6220 (H₂O):0.1555 (n-C₈H₁₈):0.0777 (SDS):0.1448 (1-C₅H₁₁OH) mass fraction; and solution-3: 0.2720 (H₂O):0.5054 (n-C₈H₁₈):0.0777 (SDS):0.1449 (1-C₅H₁₁OH) mass fraction were measured. Sodium dodecylsulfate (SDS) was used as an ionic surfactant, 1-pentanol used as stabilizer (cosurfactant), and n-octane as oil component in aqueous solution. A high-temperature, high-pressure, adiabatic, and nearly constant-volume calorimeter supplemented by quasi-static thermogram technique was used for the measurements. Measurements were made at eight densities (isochores) between 475.87 and 919.03 kg m⁻³. The range of temperature was from 275 to 536 K and pressure range was up to 138 bar. Uncertainty of the pressure, density, derivative (∂P/∂T)_VX, and heat capacity measurements are estimated to be 0.25%, 0.02%, 0.12-1.5%, and 2.5%, respectively. Temperatures at liquid-gas phase transition curve, T_S(ρ), for each measured densities (isochores) were determined using a quasi-static thermogram technique. The uncertainty of the phase transition temperature measurements is about ±0.02 K. The effect of temperature, density, and concentration on the heat capacity of the microemulsions is discussed. Along the isochore of 438.40 kg m⁻³ at temperatures above 525.44 K for the first solution the precipitation of the solid phase (SDS) was found.     

Tin(IV) complexes of schiff bases derived from pentane-2,4-dione or 2-hydroxy-1-naphthaldehyde

The 1∶2 molar reactions of tin(IV) chloride with the Schiff bases, CH₃C(OH):CHC(CH₃):NR and 2 HOC₁₀H₆CH:NR′ (where R=C₂H₅,n-C₃H₇ orn-C₄H₉ and R′=C₆H₅, C₂H₅,n-C₄H₉ ort-C₄H₉) have resulted in the synthesis of SnCl₄·(SBH)₂ type derivatives (whereSBH represents the Schiff base molecule). These have been characterized by elemental analysis, conductivity measurements and IR spectral studies.     

Photochemistry of methyl- and n1-benzyl-n5-cyclopentadienyltricarbonyltungstein(II)

Irradiation of solutions of n⁵-C₅H₅W(CO)₃R (R  CH₃n1-CH₂C₆H₅) in cyclohexane at ca. 310490 nm leads to the formation of [n⁵-C₅H₅W(CO)₃]₂ and methane and of n⁵-C₅H₅W₅(CO)₂(n³-CH₂C₆H₅) and some [n⁵-C₅H₅W(CO)₃]₂, respectively. When the irradiation is carried out in the presence of excess P(C₆H₅)₃, the photoproducts are n⁵-C₅H₅W(CO)₂[P(C₆H₅)₃]CH₃ (R  CH₃) and n⁵-C₅H₅W(CO)₂(n₃-CH₂C₆H₅) and trace [n⁵-C₅H₅W(CO)₃]₂ (R  n¹-CH₂C₆H₅). Photolysis of the n⁵-C₅H₅W(CO)₃R in the presence of benzyl chloride affords n⁵-C₅H₅W(CO)₃Cl (R  CH₃) and both n⁵-C₅H₅W(CO)₂(n³-CH₂C₂H₅) and n⁵-C₅H₅W(CO)₃Cl (R  n¹-CH₂C₆H₅), the relative amounts of the latter products depending on the quantity of added C₆H₅CH₂Cl. Irradiation of n⁵-C₅H₅W(CO)₃-CH₃ in the presence of both P(C₆h₅)₃ and C₆H₅CH₂Cl affords n⁵-C₅H₅W(CO)₂-[P(C₆H₅)₃]CH₃, but no n⁵-C₅H₅W(CO)₃Cl. It is proposed that the primary photo-reaction in these transformations is dissociation of a CO group from n⁵-C₅H₅W-(CO)₃R to generate n⁵-C₅H₅W(CO)₂R, which can either combine with L to form a stable 18 electron complex, n⁵-C₅H₅W(CO)₂(L)R (L  CO, P(C₅H₅)₃; LR  n³-CH₂C₆H₅), or lose the group R in a competing, apparently slower step. This proposal receives support from the observation that, light intensifies being equal, n⁵-C₅H₅W(CO)₃CH₃ undergoes a considerably faster photoconversion to [n⁵-C₅H₅W(CO)₃]₂ under argon than under carbon monoxide.     

X-ray photoelectron spectroscopic and magnetic susceptibility study of cis-bis ethylenediaminoalkylamino nitrito cobalt(III) nitrate

X-ray photoelectron spectra of cis-[Co(en)₂(RNH₂)(NO₂)] (NO₃)₂ complexes, where R = CH₂CHCH₂, CH₃, n-C₂ H₅, n-C₄H₉, n-C₅H₁₁ and C₆H₁₃ have been recorded on a VG scientific ESCA-3MK II electron spectrometer to study the relative covalent bonding between the metal ion and the alkylamine group (RNH₂) and to study the degree of π-back bonding from metal to ligand nitrite. The magnetic susceptibility of all these complexes was also measured by the Faraday method at room temperature.     

Rotational and vibrational distributions of N2(C 3Πu) excited by state-selected Ar(3P2) and Ar(3P0) metastable atoms

The ESR method is used to study the oxidation kinetics of the CH₃, C₂H₅, n-C₄H₉, i-C₄H₉, s-C₄H₉, t-C₄H₉, n-C₆H₁₃, C₆H₁₁, C₆H₅CH₂, CH₃C₆H₄CH₂, and C₆H₅CH₂CH₂ radicals in methanol matrix at 87 K. The reaction kinetics are shown to be describable in terms of a time-dependent rate constant k(t). The contribution from the matrix relaxation to k(t) has been determined. The oxidation rate and the shape of the kinetic curve are independent of the type of the radical. Models interpreting the experimental data are discussed.     

The hapticity of cyclooctatetraene in its first row mononuclear transition metal carbonyl complexes: Several examples of octahapto coordination

The two cyclooctatetraene metal carbonyls that have been synthesized are the tetrahapto derivative (η⁴-C₈H₈)Fe(CO)₃ and the hexahapto derivative (η⁶-C₈H₈)Cr(CO)₃ using the reactions of cyclooctatetraene with Fe(CO)₅ and with fac-(CH₃CN)₃Cr(CO)₃, respectively. Related C₈H₈M(CO)_n (M = Ti, V, Cr, Mn, Fe, Co, Ni; n = 4, 3, 2, 1) species have now been investigated by density functional theory in order to explore the scope of cyclooctatetraene metal carbonyl chemistry. In this connection, the existence of octahapto (η⁸-C₈H₈)M(CO)_n species is predicted as long as the central metal M does not exceed the 18-electron configuration by receiving eight electrons from the η⁸-C₈H₈ ring. Thus the lowest energy structures (η⁸-C₈H₈)Ti(CO)_n (n = 3, 2, 1), (η⁸-C₈H₈)M(CO)_n (M = V, Cr; n = 2, 1), and (η⁸-C₈H₈)Mn(CO) all have octahapto η⁸-C₈H₈ rings. An exception is (η⁶-C₈H₈)Fe(CO), with a hexahapto η⁶-C₈H₈ ring and thus only a 16-electron configuration for the iron atom. Hexahapto (η⁶-C₈H₈)M(CO)_n structures are predicted for the known (η⁶-C₈H₈)Cr(CO)₃ as well as the unknown (η⁶-C₈H₈)Ti(CO)₄, (η⁶-C₈H₈)V(CO)₃, (η⁶-C₈H₈)Mn(CO)₂, and (η⁶-C₈H₈)Fe(CO)₂ with 18, 18, 17, 17, and 18 electron configurations, respectively, for the central metal atoms. There are two types of tetrahapto C₈H₈M(CO)_n complexes. In the 1,2,3,4-tetrahapto (η⁴-C₈H₈)M(CO)_n complexes two adjacent CC double bonds, forming a 1,3-diene unit similar to butadiene, are bonded to the metal atom. In the 1,2,5,6-tetrahapto (η^2,2-C₈H₈)M(CO)₃ derivatives two non-adjacent CC double bonds of the C₈H₈ ring are bonded to the metal atom. The known (η⁴-C₈H₈)Fe(CO)₃ is a 1,2,3,4-tetrahapto complex. The unknown isomeric 1,2,5,6-tetrahapto complex (η^2,2-C₈H₈)Fe(CO)₃ is predicted to lie ∼15 kcal/mol above (η⁴-C₈H₈)Fe(CO)₃. The related 1,2,5,6-tetrahapto complexes (η^2,2-C₈H₈)Cr(CO)₄, (η^2,2-C₈H₈)Mn(CO)₄, [(η^2,2-C₈H₈)Mn(CO)₃]⁻, (η^2,2-C₈H₈)Co(CO)₂, and (η^2,2-C₈H₈)Ni(CO)₂ are all predicted to be low-energy structures.     

The solid state structure of arene-mercury(II) complexes from magic-angle spinning carbon-13 NMR and the solution carbon-13 NMR of some complexes of mercury(II) with arenes having bulky aliphatic substituents

The cross-polarization magic angle spinning ¹³C NMR spectra of Hg(SbF₆)₂ - 2 Arene (Arene = C₆HMe₅, 1,2,4,5-C₆H₂Me₄, 1,2,3,4-C₆H₂Me₄, or C₆H₆) have been measured. The spectra of the complexes of C₆HMe₅ and 1,2,4,5-C₆H₂Me₄ are consistent with static η¹-bonding of the mercury to the arene at an unsubstituted carbon atom, while the spectra of the 1,2,3,4-C₆H₂Me₄ and C₆H₆ complexes show the arene to have time-averaged C_s or C₂, and C₆ symmetry respectively, at the temperature of measurement (300 K).The reduced temperature ¹³C NMR spectra of Hg(Arene)_n²⁺ (n = 1 or 2; Arene = 1,3,5-C₆H₃R₃ (R = Me, i-Pr, or t-Bu)) in SO₂ solution are also reported and affirm that in these intramolecularly mobile species the mercury bonds in an η¹-manner, with unsubstituted aryl carbon atoms being the strongly preferred point of mercury attachment. This site preference is further demonstrated by the solution ¹³C NMR spectra of Hg(Arene)_n²⁺ (Arene = 1,2,3,4-C₆H₂-Me₄, n = 1 or 2; Arene = 1,4-C₆H₄R₂, R = Me or t-Bu, n = 1). The spectra of the 1,4-C₆H₄R₂ complexes and Hg(p-C₆H₄-t-BuMe)²⁺ provide clear evidence for steric influence of the binding site.Like Hg(C₆Me₆)₂²⁺, but unlike most of the complexes of substituted benzenes which have been studied, Hg(1,3,5-C₆H₃-i-Pr₃)₂²⁺ exchanges only slowly with excess free ligand.     

C2-Bridged sandwich and half-sandwich entities with Ti(IV) and Cr(0) centers

The intense purple colored bi- and trimetallic complexes {Ti}(CH₂SiMe₃)[CC(η⁶-C₆H₅)Cr(CO)₃] (3) ({Ti}=(η⁵-C₅H₅)₂Ti) and [Ti][CC(η⁶-C₆H₅)Cr(CO)₃]₂ (5) {[Ti]=(η⁵-C₅H₄SiMe₃)₂Ti}, in which next to a Ti(IV) center a Cr(0) atom is present, are accessible by the reaction of Li[CC(η⁶-C₆H₅)Cr(CO)₃] (2) with {Ti}(CH₂SiMe₃)Cl (1) or [Ti]Cl₂ (4) in a 1:1 or 2:1 molar ratio. The chemical and electrochemical properties of 3, 5, {Ti}(CH₂SiMe₃)(CCFc) [Fc=(η⁵-C₅H₅)Fe(η⁵-C₅H₄)] and [Ti][(CC)_nMc][(CC)_mM′c] [n, m=1, 2; n=m; n≠m; Mc=(η⁵-C₅H₅)Fe(η⁵-C₅H₄); M′c=(η⁵-C₅H₅)Ru(η⁵-C₅H₄); Mc=M′c; Mc≠M′c] will be comparatively discussed.     

NMR investigation of bis(2,3-alkanedione dioximato)-bis(pyridine)cobalt(III) iodide complexes: 1H and 13C NMR spectra and 13C spin-lattice relaxation time measurements

The complexes of trans-[Co(III)(R,CH₃-dioxH)₂(py)₂]I2 (R = CH₃, C₂H₅, n-C₃H₇ and n-C₄H₉) were investigated in solution by ¹H and ¹³C NMR spectra and ¹³C spin-lattice relaxation time measurements. The ¹H and ¹³C-resonances of the R = C₂H₅, n-C₃H₇ and n-C₄H₉) groups were shifted to higher field than those of the free ligands by the complexation; it was attributable to the ring current shielding due to the axial pyridine ligands of the complexes. ¹³C spin-lattice relaxation times were interpreted as due to movement of the axial pyridine ligands as if they twist around the CoN (pyridine nitrogen) bond axis and the above R groups were moving segmentally. These segmental movements allowed the R groups to approach closely toward the axial pyridine ring plane to experience the ring current shielding.     

A thermogravimetric study of lithium tetraalkoxyborates

Properties of lithium tetraalkoxyborates Li[t-C₄H₉OB(OR)₃] (R = n-C₄H₉ to n-C₈H₁₇, n-C₁₂H₂₅) were studied by differential thermogravimetry. The kinetic parameters and heat effects of thermal decomposition of lithium tetraalkoxyborates in air and inert gas atmosphere as functions of the carbon chain length were determined.     

Onium Sulfates and Hydrogen Sulfates: Products of Reactions of Sulfur(IV) Oxide with Aqueous Solutions of Alkylamines and Aniline

The reaction products formed in the SO₂–L–H₂O–O₂ systems (L is n-propylamine, n-butylamine, tert-butylamine, n-heptylamine, n-octylamine, aniline) were isolated and identified as “onium” salts [n-C₃H₇NH₃]₂SO₄, [n-C₄H₉NH₃]₂SO₄, [t-C₄H₉NH₃]₂SO₄, [n-C₇H₁₅NH₃]₃SO₄(HSO₄), [n-C₈H₁₇NH₃]₃SO₄(HSO₄), and [C₆H₅NH₃]₂SO₄. The products were characterized by elemental analysis, IR and Raman spectroscopy, mass spectrometry, and thermogravimetry.     

Anionic alkyl diglycoldiamides with covalently bonded cobalt bis(dicarbollide)(1−) ions for lanthanide and actinide extractions

Ionic diamides composed of a N,N′-dialkyl diglycolyl complexing group and two cobalt bis(dicarbollide)(1−) anions were synthesized with the aim to develop efficient extraction agents for liquid-liquid extraction of polyvalent cations, i.e. lanthanides and actinides from high-level activity nuclear waste. Compounds of general formulation [{(N,N-(8-CH₂-CH₂O)₂-1,2-C₂B₉H₁₀)(1′,2′-C₂B₉H₁₁)-3,3′-Co)(N′,N′-R)NCOCH₂}₂O]Na₂, where R = n-C₄H₉, n-C₈H₁₇, n-C₁₂H₂₅ and 1-C₆H₄-4-CH₃ (1-4), were prepared and characterized by combination of ¹¹B ¹H, ¹³C NMR spectroscopy, ESI-MS, HPLC and other techniques. Effects of different nitrogen substitution in the structures of 1-4 on the extraction properties were tested. The study resulted in the observation that the compounds are significantly (2-3 orders in magnitude) more efficient extractants for Eu(III) and Am(III) than synergic mixtures of organic N,N′-tetra n-octyl diglycolic acid diamide (TODGA) and chlorinated cobalt bis(dicarbollide) at the same concentrations of both groups. Low polar mixtures of n-dodecane (D) and hexyl methyl ketone (HMK) can be applied as an auxiliary solvent for extraction, replacing thus the polar and less environmentally friendly nitro-, fluoro- and chloro- solvents used in the current dicarbollide liquid-liquid extraction process.     

Mixed halide dialkyldithiophosphate derivatives of arsenic(III) and antimony(III)

Mixed chloride dialkyldithiophosphates of arsenic(III) and antimony(III), [(RO)₂PSS]_nMCl_3?n (M = As, Sb; n = 1, 2; R = C₂H₅, n-C₃H₇, i-C₃H₇ and i-C₄H₉) have been synthesized for the first time by the reac metal chlorides with sodium dialkyldithiophosphates or alternatively by co-disproportionation reactions of metal chlorides with metal tris(dialkyldithiophosphates) in different stoichiometric ratios. Mixed halide dialkyl-dithiophosphates of antimony(III) have also been prepared by the cleavage reactions of antimony tris(diisopropyldithiophosphate) with bromine or iodine. Hydrolysis reactions of a few of these compounds have also been studied. The new compounds have been characterized by elemental analyses, molecular weight determinations (cryoscopic) as well as IR and NMR (¹H, ³¹P) data; chelated structures with bidentate dialkyldithiophosphate groups are proposed.     

Copolymers of Maleic Anhydride and Methylene Alkanes: Synthesis,Modification, and Pour Point Depressant Properties

Copolymers with the equimolar composition and presumably alternating microstructure are synthesized by the radical copolymerization of methylene alkanes, the products of dimerization of α-olefins with the general formula RCH₂CH₂C(=CH₂)R (R = n-C₄H₇, n-C₆H₁₃, n-C₈H₁₇, n-C₁₀H₂₁, n-C₁₂H₂₅), with maleic anhydride. The products of reactions between the obtained copolymers and 1-octadecanamine or 1-octadecanol are isolated and spectrally characterized. The depressor efficiency of the copolymers with respect to the solutions of paraffins in n-alkanes is studied. Qualitative differences between the copolymers of maleic anhydride with methylene alkanes and reference copolymers based on 1-octadecene are estimated using vibrational viscometry combined with analysis of the size and morphology of paraffin crystals. It is shown that the copolymers with methylene alkanes more effectively decrease the cold filter plugging point (CFPP) of paraffin solutions in n-decane.     

Synthesis, characterization and the crystal structure of 1-[(N-methyl-N-aryl)amino]ethylferrocenes

The reactions of ferrocenylketimines [(η⁵-C₅H₄CCH₃NAr)Fe(η⁵-C₅H₅)] (Ar=a variety of substituted phenyls) with methyl-iodide in refluxed dichloromethane followed by reduction with sodium borohydride in absolute ethanol led to [(η⁵-C₅H₄CH(CH₃)N(CH₃)Ar)Fe(η⁵-C₅H₅)]. Compound [(η⁵-C₅H₄CH(CH₃)N(CH₃)C₆H₄Cl-p)Fe(η⁵-C₅H₅)] (3d) has been characterized structurally. Compound 3d is monoclinic, space group P2₁/n, with a=8.908(2) Å, b=13.63(1) Å, c=14.510(3) Å and β=107.03°.     

Homo- and copolymerization of styrene and 1-alkene using Ph2Zn-Et(Ind)2ZrCl2-MAO initiator systems

Homopolymerization of α-olefins (1-C_nH_2n, n = 6, 8, 10, 12, 16 and 18) and their copolymerization with styrene were carried out in toluene at 60 °C using diphenylzinc-ethenylbisindenylzirconium dichloride-methylaluminoxane as initiator system. Atactic polystyrene and almost isotactic poly(α-olefin)s were obtained. Copolymerization of S/α-olefin with this initiator system gave isotactic olefin-enriched copolymers. According to DSC analysis, the homopolymers P(1-C₁₂H₂₄), P(1-C₁₆H₃₂), and P(1-C₁₈H₃₆) as well their styrene copolymers are crystalline.     

Low-frequency Raman-active vibrations of triclinic n-paraffins

The low-frequency Raman spectra of triclinic n-paraffins, n-C₈H₁₈ through n-C₂₄H₅₀, were observed. The normal-coordinate treatments of crystal vibrations of n-C₈H₁₈ through n-C₁₈H₃₈ were carried out. Six characteristic series of the observed Raman lines were assigned to rotatory lattice vibrations and intramolecular skeletal vibrations.     

The reaction between [η5-C5H5M(CO)3]2, η5-C5H5M(CO)3I (M  Mo,W) and isonitriles

The reaction between η⁵-C₅H₅M(CO)₃I (M  Mo, W) and isonitriles, RNC, (RNC  PhCH₂NC, t-BuNC and 2,6-dimethylphenylisocyanide (XyNC)) is catalysed by the dimer [η⁵-C₅H₅M(CO)₃]₂ (M = Mo, W) to yield η⁵-C₅H₅M(CO)_3?n(RNC)_nI (n = 1–3) and [η⁵-C₅H₅Mo(RNC)₄]I. The complexes (η⁵-C₅H₅)₂Mo₂(CO)₆?n(RNC)_n (n = 1, RNC = MeNC, PhCH₂NC, XyNC, t-BuNC; n = 2, RNC = t-BuNC) have been prepared in moderate yield from the direct reaction between [η⁵-C₅H₅Mo(CO)₃]₂ and RNC, and also catalyse the above reaction. A reaction pathway involving a fast non-chain radical mechanism and a slower chain radical mechanism is proposed to account for the catalysed reaction.     

Preparation and characterization of dichlorobis(N-alkyl-substituted salicylideneaminato)manganese(IV) complexes

A series of dichlorobis(N-alkyl-substituted salicylideneaminato)manganese(IV) complexes, Mn(N-R-Xsal)₂Cl₂, was prepared by the reaction of Mn(NRXsal)₂Cl complexes with hydrogen chloride, where R can be n-C₈H₁₇ (Oct), n-C₁₂H₂₅ (Dod), n-C₁₈H₃₇ (Octd), and CH₂C₆H₅ (Bz) and X can be 5-bromo, 5-nitro, and 5,6-benzo groups. These complexes were characterized by the magnetic susceptibilities, IR and electronic spectra, and cyclic voltammograms.