Transition‐Metal‐Functionalized DNA Double‐Crossover Tiles: Enhanced Stability and Chirality Transfer to Metal Centers

The double crossover junction (DX) is a fundamental building block for generating complex and varied structures from DNA. However, its implementation in functional devices is limited to the inherent properties of DNA itself. Here, we developed design strategies to generate the first metal–DX DNA tiles (DX_M) by site‐specifically functionalizing the tile crossovers with tetrahedral binding pockets that coordinate Cu^I. These DX junctions bind two Cu^I ions independently at distinct sites, display greater thermal stability than native DX tiles upon metalation, and melt in a cooperative fashion. In addition, the right‐handed helical chirality of DNA is transferred to the metal centers. Our tiles display high metal ion selectivity, such that Cu^II is spontaneously reduced to Cu^I in situ. By modifying our design over three generations of tiles, we elucidated the thermodynamic and geometric requirements for the successful assembly of DX_M tiles, which have direct applicability in developing robust, stable DNA‐based materials with electroactive, photoactive, and catalytic properties.     

Self‐Assembly of Complex DNA Tessellations by Using Low‐Symmetry Multi‐arm DNA Tiles

Modular DNA tile‐based self‐assembly is a versatile way to engineer basic tessellation patterns on the nanometer scale, but it remains challenging to achieve high levels of structural complexity. We introduce a set of general design principles to create intricate DNA tessellations by employing multi‐arm DNA motifs with low symmetry. We achieved two novel Archimedean tiling patterns, (4.8.8) and (3.6.3.6), and one pattern with higher‐order structures beyond the complexity observed in Archimedean tiling. Our success in assembling complicated DNA tessellations demonstrates the broad design space of DNA structural motifs, enriching the toolbox of DNA tile‐based self‐assembly and expanding the complexity boundaries of DNA tile‐based tessellation.     

Directed Self‐Assembly of DNA Tiles into Complex Nanocages

Tile‐based self‐assembly is a powerful method in DNA nanotechnology and has produced a wide range of well‐defined nanostructures. But the resulting structures are relatively simple. Increasing the structural complexity and the scope of the accessible structures is an outstanding challenge in molecular self‐assembly. A strategy to partially address this problem by introducing flexibility into assembling DNA tiles and employing directing agents to control the self‐assembly process is presented. To demonstrate this strategy, a range of DNA nanocages have been rationally designed and constructed. Many of them can not be assembled otherwise. All of the resulting structures have been thoroughly characterized by gel electrophoresis and cryogenic electron microscopy. This strategy greatly expands the scope of accessible DNA nanostructures and would facilitate technological applications such as nanoguest encapsulation, drug delivery, and nanoparticle organization.     

Binding‐Induced DNA Nanomachines Triggered by Proteins and Nucleic Acids

We introduce the concept and operation of a binding‐induced DNA nanomachine that can be activated by proteins and nucleic acids. This new type of nanomachine harnesses specific target binding to trigger assembly of separate DNA components that are otherwise unable to spontaneously assemble. Three‐dimensional DNA tracks of high density are constructed on gold nanoparticles functionalized with hundreds of single‐stranded oligonucleotides and tens of an affinity ligand. A DNA swing arm, free in solution, is linked to a second affinity ligand. Binding of a target molecule to the two ligands brings the swing arm to AuNP and initiates autonomous, stepwise movement of the swing arm around the AuNP surface. The movement of the swing arm, powered by enzymatic cleavage of conjugated oligonucleotides, cleaves hundreds of oligonucleotides in response to a single binding event. We demonstrate three nanomachines that are specifically activated by streptavidin, platelet‐derived growth factor, and the Smallpox gene. Substituting the ligands enables the nanomachine to respond to other molecules. The new nanomachines have several unique and advantageous features over DNA nanomachines that rely on DNA self‐assembly.     

Templated self-assembly of wedge-shaped DNA arrays

We demonstrate the use of a one-dimensional template to control the shape of a two-dimensional array self-assembled from a minimal set of DNA tiles. A periodic single-stranded template seeds tile assembly. A unique vertex tile at the 5′ end of the template controls the positioning of edge and body tiles to create a wedge-shaped array. The vertex angle of the array is approximately 12°; edge lengths are of the order of 1 μm.     

Constructing Large 2D Lattices Out of DNA-Tiles

The predictable nature of deoxyribonucleic acid (DNA) interactions enables assembly of DNA into almost any arbitrary shape with programmable features of nanometer precision. The recent progress of DNA nanotechnology has allowed production of an even wider gamut of possible shapes with high-yield and error-free assembly processes. Most of these structures are, however, limited in size to a nanometer scale. To overcome this limitation, a plethora of studies has been carried out to form larger structures using DNA assemblies as building blocks or tiles. Therefore, DNA tiles have become one of the most widely used building blocks for engineering large, intricate structures with nanometer precision. To create even larger assemblies with highly organized patterns, scientists have developed a variety of structural design principles and assembly methods. This review first summarizes currently available DNA tile toolboxes and the basic principles of lattice formation and hierarchical self-assembly using DNA tiles. Special emphasis is given to the forces involved in the assembly process in liquid-liquid and at solid-liquid interfaces, and how to master them to reach the optimum balance between the involved interactions for successful self-assembly. In addition, we focus on the recent approaches that have shown great potential for the controlled immobilization and positioning of DNA nanostructures on different surfaces. The ability to position DNA objects in a controllable manner on technologically relevant surfaces is one step forward towards the integration of DNA-based materials into nanoelectronic and sensor devices.     

An Aptamer‐Nanotrain Assembled from Six‐Letter DNA Delivers Doxorubicin Selectively to Liver Cancer Cells

Expanding the number of nucleotides in DNA increases the information density of functional DNA molecules, creating nanoassemblies that cannot be invaded by natural DNA/RNA in complex biological systems. Here, we show how six‐letter GACTZP DNA contributes this property in two parts of a nanoassembly: 1) in an aptamer evolved from a six‐letter DNA library to selectively bind liver cancer cells; and 2) in a six‐letter self‐assembling GACTZP nanotrain that carries the drug doxorubicin. The aptamer‐nanotrain assembly, charged with doxorubicin, selectively kills liver cancer cells in culture, as the selectivity of the aptamer binding directs doxorubicin into the aptamer‐targeted cells. The assembly does not kill untransformed cells that the aptamer does not bind. This architecture, built with an expanded genetic alphabet, is reminiscent of antibodies conjugated to drugs, which presumably act by this mechanism as well, but with the antibody replaced by an aptamer.     

One‐Step Formation of “Chain‐Armor”‐Stabilized DNA Nanostructures

DNA‐based self‐assembled nanostructures are widely used to position organic and inorganic objects with nanoscale precision. A particular promising application of DNA structures is their usage as programmable carrier systems for targeted drug delivery. To provide DNA‐based templates that are robust against degradation at elevated temperatures, low ion concentrations, adverse pH conditions, and DNases, we built 6‐helix DNA tile tubes consisting of 24 oligonucleotides carrying alkyne groups on their 3′‐ends and azides on their 5′‐ends. By a mild click reaction, the two ends of selected oligonucleotides were covalently connected to form rings and interlocked DNA single strands, so‐called DNA catenanes. Strikingly, the structures stayed topologically intact in pure water and even after precipitation from EtOH. The structures even withstood a temperature of 95 °C when all of the 24 strands were chemically interlocked.     

Gold‐Nanoparticle‐Mediated Jigsaw‐Puzzle‐like Assembly of Supersized Plasmonic DNA Origami

DNA origami has rapidly emerged as a powerful and programmable method to construct functional nanostructures. However, the size limitation of approximately 100 nm in classic DNA origami hampers its plasmonic applications. Herein, we report a jigsaw‐puzzle‐like assembly strategy mediated by gold nanoparticles (AuNPs) to break the size limitation of DNA origami. We demonstrated that oligonucleotide‐functionalized AuNPs function as universal joint units for the one‐pot assembly of parent DNA origami of triangular shape to form sub‐microscale super‐origami nanostructures. AuNPs anchored at predefined positions of the super‐origami exhibited strong interparticle plasmonic coupling. This AuNP‐mediated strategy offers new opportunities to drive macroscopic self‐assembly and to fabricate well‐defined nanophotonic materials and devices.     

Reciprocal Self‐Assembly of Peptide–DNA Conjugates into a Programmable Sub‐10‐nm Supramolecular Deoxyribonucleoprotein

To overcome the limitations of molecular assemblies, the development of novel supramolecular building blocks and self‐assembly modes is essential to create more sophisticated, complex, and controllable aggregates. The self‐assembly of peptide–DNA conjugates (PDCs), in which two orthogonal self‐assembly modes, that is, β‐sheet formation and Watson–Crick base pairing, are covalently combined in one supramolecular system, is reported. Despite extensive research, most self‐assembly studies have focused on using only one type of building block, which restricts structural and functional diversity compared to multicomponent systems. Multicomponent systems, however, suffer from poor control of self‐assembly behaviors. Covalently conjugated PDC building blocks are shown to assemble into well‐defined and controllable nanostructures. This controllability likely results from the decrease in entropy associated with the restriction of the molecular degrees of freedom by the covalent constraints. Using this strategy, the possibility to thermodynamically program nano‐assemblies to exert gene regulation activity with low cytotoxicity is demonstrated.     

A Case Study of the Likes and Dislikes of DNA and RNA in Self‐Assembly

Programmed self‐assembly of nucleic acids (DNA and RNA) is an active research area as it promises a general approach for nanoconstruction. Whereas DNA self‐assembly has been extensively studied, RNA self‐assembly lags much behind. One strategy to boost RNA self‐assembly is to adapt the methods of DNA self‐assembly for RNA self‐assembly because of the chemical and structural similarities of DNA and RNA. However, these two types of molecules are still significantly different. To enable the rational design of RNA self‐assembly, a thorough examination of their likes and dislikes in programmed self‐assembly is needed. The current work begins to address this task. It was found that similar, two‐stranded motifs of RNA and DNA lead to similar, but clearly different nanostructures.     

Host–Guest Binding‐Site‐Tunable Self‐Assembly of Stimuli‐Responsive Supramolecular Polymers

Despite the remarkable progress made in controllable self‐assembly of stimuli‐responsive supramolecular polymers (SSPs), a basic issue that has not been consideration to date is the essential binding site. The noncovalent binding sites, which connect the building blocks and endow supramolecular polymers with their ability to respond to stimuli, are expected to strongly affect the self‐assembly of SSPs. Herein, the design and synthesis of a dual‐stimuli thermo‐ and photoresponsive Y‐shaped supramolecular polymer (SSP2) with two adjacent β‐cyclodextrin/azobenzene (β‐CD/Azo) binding sites, and another SSP (SSP1) with similar building blocks, but only one β‐CD/Azo binding site as a control, are described. Upon gradually increasing the polymer solution temperature or irradiating with UV light, SSP2 self‐assemblies with a higher binding‐site distribution density; exhibits a flower‐like morphology, smaller size, and more stable dynamic aggregation process; and greater controllability for drug‐release behavior than those observed with SSP1 self‐assemblies. The host–guest binding‐site‐tunable self‐assembly was attributed to the positive cooperativity generated among adjacent binding sites on the surfaces of SSP2 self‐assemblies. This work is beneficial for precisely controlling the structural parameters and controlled release function of SSP self‐assemblies.     

Reconfigurable T‐junction DNA Origami

DNA self‐assembly allows the construction of nanometre‐scale structures and devices. Structures with thousands of unique components are routinely assembled in good yield. Experimental progress has been rapid, based largely on empirical design rules. Herein, we demonstrate a DNA origami technique designed as a model system with which to explore the mechanism of assembly. The origami fold is controlled through single‐stranded loops embedded in a double‐stranded DNA template and is programmed by a set of double‐stranded linkers that specify pairwise interactions between loop sequences. Assembly is via T‐junctions formed by hybridization of single‐stranded overhangs on the linkers with the loops. The sequence of loops on the template and the set of interaction rules embodied in the linkers can be reconfigured with ease. We show that a set of just two interaction rules can be used to assemble simple T‐junction origami motifs and that assembly can be performed at room temperature.     

Dynamic Expression of DNA Complexation with Self‐assembled Biomolecular Clusters

We report herein the implementation of a dynamic covalent chemistry approach to the generation of multivalent clusters for DNA recognition. We show that biomolecular clusters can be expressed in situ by a programmed self‐assembly process using chemoselective ligations. The cationic clusters are shown, by fluorescence displacement assay, gel electrophoresis and isothermal titration calorimetry, to effectively complex DNA through multivalent interactions. The reversibility of the ligation was exploited to demonstrate that template effects occur, whereby DNA imposes component selection in order to favor the most active DNA‐binding clusters. Furthermore, we show that a chemical effector can be used to trigger DNA release through component exchange reactions.     

Surface‐Assisted Large‐Scale Ordering of DNA Origami Tiles

The arrangement of DNA‐based nanostructures into extended higher order assemblies is an important step towards their utilization as functional molecular materials. We herein demonstrate that by electrostatically controlling the adhesion and mobility of DNA origami structures on mica surfaces by the simple addition of monovalent cations, large ordered 2D arrays of origami tiles can be generated. The lattices can be formed either by close‐packing of symmetric, non‐interacting DNA origami structures, or by utilizing blunt‐end stacking interactions between the origami units. The resulting crystalline lattices can be readily utilized as templates for the ordered arrangement of proteins.     

Dry Sintering Meets Wet Silver‐Ion “Soldering”: Charge‐Transfer Plasmon Engineering of Solution‐Assembled Gold Nanodimers From Visible to Near‐Infrared I and II Regions

Achieving highly tunable and localized surface plasmon resonance up to near infrared (NIR) regions is a key target in nanoplasmonics. In particular, a self‐assembly process capable of producing highly uniform and solution‐processable nanomaterials with tailor‐made plasmonic properties is lacking. We herein address this problem through a conjunctive use of wet Ag⁺ soldering and dry thermal sintering to produce nanodimer‐derived structures with precisely engineered charge‐transfer plasmon (CTP). The sintered dimers are water soluble, featuring gradually shifted CTP spanning an 800 nm wavelength range (up to NIR II). Upon silica removal, the products are grafted by DNA to offer surface functionality. This process is also adaptable to DNA‐linked AuNP dimers toward plasmonic meta‐materials via DNA‐guided soldering and sintering.     

Crystallization of DNA‐Capped Gold Nanoparticles in High‐Concentration,Divalent Salt Environments

The multiparametric nature of nanoparticle self‐assembly makes it challenging to circumvent the instabilities that lead to aggregation and achieve crystallization under extreme conditions. By using non‐base‐pairing DNA as a model ligand instead of the typical base‐pairing design for programmability, long‐range 2D DNA–gold nanoparticle crystals can be obtained at extremely high salt concentrations and in a divalent salt environment. The interparticle spacings in these 2D nanoparticle crystals can be engineered and further tuned based on an empirical model incorporating the parameters of ligand length and ionic strength.     

Crystallization of DNA‐Capped Gold Nanoparticles in High‐Concentration,Divalent Salt Environments

The multiparametric nature of nanoparticle self‐assembly makes it challenging to circumvent the instabilities that lead to aggregation and achieve crystallization under extreme conditions. By using non‐base‐pairing DNA as a model ligand instead of the typical base‐pairing design for programmability, long‐range 2D DNA–gold nanoparticle crystals can be obtained at extremely high salt concentrations and in a divalent salt environment. The interparticle spacings in these 2D nanoparticle crystals can be engineered and further tuned based on an empirical model incorporating the parameters of ligand length and ionic strength.     

Programmed Self‐Assembly of a Quadruplex DNA Nanowire

The ability to produce, reproducibly and systematically, well‐defined quadruplex DNA nanowires through controlled rational design is poorly understood despite potential utility in structural nanotechnology. The programmed hierarchical self‐assembly of a long four‐stranded DNA nanowire through cohesive self‐assembly of GpC and CpG “sticky” ends is reported. The encoding of bases within the quadruplex stem allows for an uninterrupted π‐stacking system with rectilinear propagation for hundreds of nanometers in length. The wire is mechanically stable and features superior nuclease resistance to double‐stranded DNA. The study indicates the feasibility for programmed assembly of uninterrupted quadruplex DNA nanowires. This is fundamental to the systematic investigation of well‐defined DNA nanostructures for uses in optoelectronic and electronic devices as well as other structural nanotechnology applications.     

Monte Carlo Simulation of the Assembly of bis‐Biotinylated DNA and Streptavidin

We present Monte Carlo simulations of the self‐assembly of bivalent bis‐biotinylated DNA molecules with the tetravalent biotin‐binding protein streptavidin (STV). By fitting the STV binding probabilities for the four possible valencies, the modelling correctly reproduces the dependencies of various network parameters experimentally observed in an earlier study. The combined results from the experimental and theoretical studies suggest that the binding probability for divalent STV formation is about 50 times larger than for the formation of trivalent and about 200 times larger than for tetravalent STV. In accordance with the experimental results, the modelling also indicates that the mixture of an equimolar ratio of DNA and STV leads to a maximum in size of the oligomeric DNA–STV clusters formed. Furthermore, we found a percolation transition in which the DNA cluster size increases rapidly with increasing DNA concentration resulting in the formation of a single supercluster at elevated concentrations. This behaviour coincides with the occurrence of an immobile band previously observed in electrophoretic experiments, indicating the formation of extremely large DNA–STV aggregate networks.