Multi‐Stimuli‐Responsive Polymeric Materials

Stimuli‐responsive materials are of immense importance because of their ability to undergo alteration of their properties in response to their environment. The properties of such materials can be tuned by subtle adjustments in temperature, pH, light, and so forth. Among such smart materials, multi‐stimuli‐responsive polymeric materials are of pronounced significance as they offer a wide range of applications and their properties can be tuned through several mechanisms. Here, we aim to highlight some recent studies showcasing the multi‐stimuli‐responsive character of these polymers, which are still relatively little known compared to their single‐stimuli‐responsive counterpart.     

Rapid,On‐Command Debonding of Stimuli‐Responsive Cross‐Linked Adhesives by Continuous,Sequential Quinone Methide Elimination Reactions

Adhesives that selectively debond from a surface by stimuli‐induced head‐to‐tail continuous depolymerization of poly(benzyl ether) macro‐cross‐linkers within a poly(norbornene) matrix are described. Continuous head‐to‐tail depolymerization provides faster rates of response than can be achieved using a small‐molecule cross‐linker, as well as responses to lower stimulus concentrations. Shear‐stress values for glass held together by the adhesive reach 0.51±0.10 MPa, whereas signal‐induced depolymerization via quinone methide intermediates reduces the shear stress values to 0.05±0.02 MPa. Changing the length of the macro‐cross‐linkers alters the time required for debonding, and thus enables the programmed sequential release of specific layers in a glass composite material.     

Multi‐Stimuli‐Responsive Polymer Materials: Particles,Films, and Bulk Gels

Stimuli‐responsive polymers have received tremendous attention from scientists and engineers for several decades due to the wide applications of these smart materials in biotechnology and nanotechnology. Driven by the complex functions of living systems, multi‐stimuli‐responsive polymer materials have been designed and developed in recent years. Compared with conventional single‐ or dual‐stimuli‐based polymer materials, multi‐stimuli‐responsive polymer materials would be more intriguing since more functions and finer modulations can be achieved through more parameters. This critical review highlights the recent advances in this area and focuses on three types of multi‐stimuli‐responsive polymer materials, namely, multi‐stimuli‐responsive particles (micelles, micro/nanogels, vesicles, and hybrid particles), multi‐stimuli‐responsive films (polymer brushes, layer‐by‐layer polymer films, and porous membranes), and multi‐stimuli‐responsive bulk gels (hydrogels, organogels, and metallogels) from recent publications. Various stimuli, such as light, temperature, pH, reduction/oxidation, enzymes, ions, glucose, ultrasound, magnetic fields, mechanical stress, solvent, voltage, and electrochemistry, have been combined to switch the functions of polymers. The polymer design, preparation, and function of multi‐stimuli‐responsive particles, films, and bulk gels are comprehensively discussed here.     

Synthesis of Poly(2‐oxazoline)‐Based Hydrogels with Tailor‐Made Swelling Degrees Capable of Stimuli‐Triggered Compound Release

A 32‐membered library of poly(2‐oxazoline)‐based hydrogels of the composition p EtOx _m‐p PhOx _n‐p PBO _q (m/n = 150/0, 100/50, 50/100, and 0/150; q = 1.5–30) was prepared from 2‐ethyl‐ ( EtOx ), 2‐phenyl‐2‐oxazoline ( PhOx ), and phenylene‐1,3‐bis‐(2‐oxazoline) ( PBO ). The polymerizations were performed from ground monomer mixtures at 140 °C in a single‐mode microwave reactor in reaction times as short as 1 h. Purified hydrogels, containing no residual monomers, were obtained in yields of 95% or higher. Acid‐mediated hydrolysis rates as well as swelling degrees of the hydrogels were adjustable over a broad range; swelling degrees in water/ethanol/dichloromethane ranged from 0 to 13.8/11.7/20.0. The hydrogels could incorporate organic molecules according to in situ or post‐synthetic routines. Post‐synthetic routines enabled for the preparation of hydrogels from which the incorporated compounds were only released through diffusion processes if the solvent was changed or through hydrogel degradation if the pH was lowered.     

Multi‐Sensitive Microgels Filled with Conducting Poly(3,4‐ethylenedioxythiophene) Nanorods

In this work we describe the synthesis of multi‐sensitive aqueous microgel particles with incorporated conducting poly(3,4‐ethylenedioxythiophene) (PEDOT) nanorods. We demonstrate that the loaded amount of PEDOT nanorods as well as their morphology can be varied by controlling the reaction conditions such as monomer concentration and alcohol concentration in aqueous phase. Obtained microgels can be stimulated by changes in the environment temperature as well as by the repulsion/attraction forces within polymeric network due to the reversible oxidation/reduction of the conjugated polymer. Microgels with unique properties can be operated in colloidal systems or used as building blocks for the preparation of nanostructured films.

     

Synthesis and Self‐Assembly of pH‐Responsive Amphiphilic Poly(dimethylaminoethyl methacrylate)‐block‐Poly(pentafluorostyrene) Block Copolymer in Aqueous Solution

We report the synthesis of a novel pH‐responsive amphiphilic block copolymer poly(dimethylaminoethyl methacrylate)‐block‐poly(pentafluorostyrene) (PDMAEMA‐b‐PPFS) using RAFT‐mediated living radical polymerization. Copolymer micelle formation, in aqueous solution, was investigated using fluorescence spectroscopy, static and dynamic light scattering (SLS and DLS), and transmission electron microscopy (TEM). DLS and SLS measurements revealed that the diblock copolymers form spherical micelles with large aggregation numbers, N_agg ≈ 30 where the dense PPFS core is surrounded by dangling PDMAEMA chains as the micelle corona. The hydrodynamic radii, R_h of these micelles is large, at pH 2–5 as the protonated PDMAEMA segments swell the micelle corona. Above pH 5, the PDMAEMA segments are gradually deprotonated, resulting in a lower osmotic pressure and enhanced hydrophobicity within the micelle, thus decreasing the R_h. However, the radius of gyration, R_g remains independent of pH as the dense PPFS cores predominate.

     

Poly(paraphenylene sulfide) and Poly(metaphenylene sulfide) via Light‐Initiated SRN1‐Type Polymerization of Halogenated Thiophenols

In this work, the synthesis of various halogenated thiophenol derivatives is presented. These thiophenols are used as monomers in light‐initiated S_RN1‐type radical polymerization reactions. The method provides easy access to industrially relevant poly(paraphenylene sulfide) and poly(metaphenylene sulfide). The influence of the halide leaving group and of other substituents in the thiophenol monomer on the polymerization process is investigated.

     

Response Behavior of Poly(vinyl chloride)‐ and Polyurethane‐Based Ca2+‐Selective Membrane Electrodes with Polypyrrole‐ and Poly(3‐octylthiophene)‐Mediated Internal Solid Contact

The potentiometric response behavior of Ca²⁺‐selective poly(vinyl chloride) (PVC) and polyurethane (PU) membranes with different inner contacts has been compared. Evidence for the formation of a water film between membrane and internal contact and, hence, a less than optimal lower detection limit have been found for membranes directly in contact with bare Au or with polypyrrole generated by electropolymerization in the presence of KCl. A significantly better behavior is shown by membranes with polypyrrole prepared in the presence of potassium hexacyanoferrate. Best performances have been obtained with solvent‐cast poly(3‐octylthiophene) as the internal contacting layer. As compared with the PVC membranes, those with PU had a significantly worse performance throughout.     

Self‐Assembly in Water of Poly(acrylic acid)‐Based Diblock Copolymers Synthesized by Nitroxide‐Mediated Polymerization

Summary: Amphiphilic diblock copolymers consisting of a hydrophilic block, poly(acrylic acid), and a hydrophobic block, polystyrene, were synthesized by direct nitroxide‐mediated polymerization using the PS block as a macro‐initiator for the first time. Several techniques were used to characterize the amphiphilic block copolymers (size exclusion chromatography, NMR spectroscopy). The proposed method can lead to samples with a broad range of composition and molar mass. Preliminary studies of their self‐assembly in aqueous medium using fluorescence spectroscopy and small‐angle neutron scattering are presented.

Schematic of the formation of the PS‐b‐PAA block copolymers and their micellization in aqueous media.     

Thermo‐ and pH‐Responsive Micelles of Poly(acrylic acid)‐block‐Poly(N,N‐diethylacrylamide)

Summary: The bis‐hydrophilic block copolymer, poly(acrylic acid)₄₅‐block‐poly(N,N‐diethylacrylamide)₃₆₀, was obtained after hydrolysis of poly(tert‐butyl acrylate)₄₅‐block‐poly(N,N‐diethylacrylamide)₃₆₀, synthesized by sequential anionic polymerization of tert‐butyl acrylate (tBA) and N,N‐diethylacrylamide (DEAAm) in the presence of Et₃Al. The polymer is stimuli‐sensitive with respect to both pH and temperature in aqueous solution, reversibly forming spherical crew‐cut micelles with PDEAAm‐core (〈R_h〉_z = 21.5 nm) under alkaline conditions for T > 35 °C as well as inverse star‐like micelles with an expanded PAA‐core (〈R_h〉_z = 43.8 nm) under acidic conditions for T < 35 °C, as indicated by dynamic light scattering.

Modes of micelle formation for poly(acrylic acid)₄₅‐block‐poly(N,N‐diethylacrylamide)₃₆₀ in aqueous solution depending on the pH and temperature.     

Platinum(II) Metallomesogens: New External‐Stimuli‐Responsive Photoluminescence Materials

New dicatenar isoquinoline‐functionalized pyrazoles, [Hpz^R(n,n)iq] (R(n,n)=C₆H₃(OC_nH_2n+1)₂; n=4, 6, 8, 10, 12, 14, 16, 18), have been strategically designed and synthesized to induce mesomorphic and luminescence properties into the corresponding bis(isoquinolinylpyrazolate)platinum(II) complexes [Pt(pz^R(n,n)iq)₂]. Thermal studies reveal that all platinum(II) compounds exhibit columnar mesophases over an exceptionally wide temperature range, above 300 °C in most cases. The photophysical behavior was also investigated in solution and in the solid state. As a consequence of the formation of Pt???Pt interactions, the weak greenish emission of the platinum derivatives turns bright orange in the mesophase. Additionally, the complexes are sensitive to a great variety of external inputs, such as temperature, mechanical grinding, pressure, solvents, and vapors. On this basis, they are used as dopant agents of a polyvinylpyrrolidone or poly(methyl methacrylate) polymer matrix to achieve stimuli‐responsive thin films.     

Synthesis of Novel Thermo‐ and pH‐Responsive Poly(L‐lysine)‐Based Copolymer and its Micellization in Water

A series of novel temperature and pH responsive block copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly(L ‐lysine) (PLL) were synthesized. The effect of pH and the length of PLL on the lower critical solution temperature (LCST) of PNIPAM, and the self‐assembly of these PLL‐based copolymers induced by temperature and pH changes were investigated by the cloud point method, dynamic light scattering (DLS) and environmental scanning electron microscopy (ESEM). These PNIPAM‐b‐PLL copolymers can self‐assemble into micelle‐like aggregates with PNIPAM as the hydrophobic block at acidic pH and high temperatures; and at alkaline pH and low temperatures, they can self‐assemble into particles with PLL as the hydrophobic block. The copolymers may have potential applications in biotechnological and biomedical areas as drug release carriers.

     

Self‐Storage: A Novel Family of Stimuli‐Responsive Polymer Materials for Optical and Electrochemical Switching

For most stimuli‐responsive polymer materials (SRPMs), such as polymer gels, micelles, and brushes, the responsive mechanism is based on the solubility or compatibility with liquid media. That basis always results in distorting or collapsing the material's appearance and relies on external liquids. Here, a novel kind of SRPMs is proposed. Unlike most SRPMs, liquid is stored within special domains rather than expelled, so it is deforming‐free and relying on no external liquid, which is referred to as self‐storage SRPMs (SS‐SRPMs). The facile and universal route to fabricate SS‐SRPMs allows for another novel family of SRPMs. Furthermore, it is validated that SS‐SRPMs can drastically respond to outside temperature like switchers, especially for optical and electrochemical responses. Those features hold prospects for applications in functional devices, such as smart optical lenses or anti‐self‐discharge electrolytes for energy devices.

     

Multi‐Stimuli‐Responsive Organometallic Gels Based on Ferrocene‐Linked Poly(Aryl Ether) Dendrons: Reversible Redox Switching and Pb2+‐Ion Sensing

We describe the design, synthesis, and “stimuli‐responsive” study of ferrocene‐linked Fréchet‐type [poly(aryl ether)]‐dendron‐based organometallic gels, in which the ferrocene moiety is attached to the dendron framework through an acyl hydrazone linkage. The low‐molecular‐weight gelators (LMWGs) form robust gels in both polar and non‐polar solvent/solvent mixtures. The organometallic gels undergo stimuli‐responsive behavior through 1) thermal, 2) chemical, and 3) electrochemical methods. Among them, conditions 1 and 3 lead to seamlessly reversible with repeated cycles of identical efficiency. Results indicate that the flexible nature of the poly(aryl ether) dendron framework plays a key role in retaining the reversible electrochemical behavior of ferrocene moiety in the LMWGs. Further, the organometallic gelators have exhibited unique selectivity towards Pb²⁺ ions (detection limit ≈10^?8 M ). The metal ion‐sensing results in a gel–sol phase transition associated with a color change visible to the naked eye. Most importantly, decomplexing the metal ion from the system leads to the regeneration of the initial gel morphology, indicating the restoring ability of the organometallic gel. The metal–ligand binding nature has been analyzed by using ¹H NMR spectroscopy, mass spectrometry, and DFT calculations.     

New Stimuli Responsive Poly(1‐vinylpyrrolidin‐2‐one) Bearing Pendant Activated Disulfide Groups

Summary: A novel functionalised poly(1‐vinylpyrrolidin‐2‐one) (PVP) derivative, carrying a pre‐determined amount of 2‐(2‐pyridinyldithio)ethylamine moieties as side substituents, P(VP‐co‐VP‐SS‐Py), has been prepared from carboxylated VP copolymers, in turn obtained by copolymerising 1‐vinylpyrrolidin‐2‐one with 3,3‐di‐(ethoxycarbonyl)‐1‐vinylpyrrolidin‐2‐one in the presence of radical initiators. Using reaction solvents acting in the mean time as chain transfer agents could control its molecular weight. P(VP‐co‐VP‐SS‐Py) proved to be extremely reactive towards exchange reactions with molecules containing mercapto functions, including bioactive peptides. The exchange derivative with reduced glutathione, chosen as a model compound, was easily prepared.

     

Self‐assembly of amphiphilic tris(2,2′‐bipyridine)ruthenium‐cored star‐shaped polymers

Amphiphilic tris(2,2′‐bipyridine)ruthenium‐cored star‐shaped polymers consisting of one polystyrene block and two poly(N‐isopropylacrylamide) blocks were prepared by the “arm‐first” method in which RAFT polymerization and nonconvalent ligand–metal complexation were employed. The prepared amphiphilic star‐shaped metallopolymers are able to form micelles in water. The size and distribution of the micelles were studied by dynamic light scattering and transmission electron microscopy techniques. Preliminary studies indicate that the polymer concentration and the hydrophilic poly(N‐isopropylacrylamide) block length can affect the morphologies of the formed metal‐interfaced core–shell micelles in water. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4204–4210, 2007     

Synthesis and Characterization of Stimuli‐Responsive Star‐Like Polypept(o)ides: Introducing Biodegradable PeptoStars

Star‐like polymers are one of the smallest systems in the class of core crosslinked polymeric nanoparticles. This article reports on a versatile, straightforward synthesis of three‐arm star‐like polypept(o)ide (polysarcosine‐block‐polylysine) polymers, which are designed to be either stable or degradable at elevated levels of glutathione. Polypept(o)ides are a recently introduced class of polymers combining the stealth‐like properties of the polypeptoid polysarcosine with the functionality of polypeptides, thus enabling the synthesis of materials completely based on endogenous amino acids. The star‐like homo and block copolymers are synthesized by living nucleophilic ring opening polymerization of the corresponding N‐carboxyanhydrides (NCAs) yielding polymeric stars with precise control over the degree of polymerization (X _n = 25, 50, 100), Poisson‐like molecular weight distributions, and low dispersities (Đ = 1.06–1.15). Star‐like polypept(o)ides display a hydrodynamic radius of 5 nm (μ₂ < 0.05) as determined by dynamic light scattering (DLS). While star‐like polysarcosines and polypept(o)ides based on disulfide containing initiators are stable in solution, degradation occurs at 100 × 10^–3m glutathione concentration. The disulfide cleavage yields the respective polymeric arms, which possess Poisson‐like molecular weight distributions and low dispersities (Đ = 1.05–1.12). Initial cellular uptake and toxicity studies reveal that PeptoStars are well tolerated by HeLa, HEK 293, and DC 2.4 cells.